Slackware :: 13.1: GraphicsMagick Install Error On Liblcms.so?
Dec 25, 2010
In an attempt to install GraphicsMagick (from slackbuilds.org) on Slackware 13.1, I get the following error:
Code:
/usr/lib/liblcms.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[1]: *** [magick/libGraphicsMagick.la] Error 1
make[1]: Leaving directory `/tmp/SBo/GraphicsMagick-
Just installed slackware 13.0 32bits using the usb-based netinstall. Did a minimal cli install and unchecked bash (since I wanted to use tcsh on this particular OS). But now on first boot it tells me that it shows an error message indicating "unable to identify tty name" and won't let me login (I'm using the root account since I haven't yet set up additional users). My question is, is the error happening because I unselected bash during installation? If so, is there any config file that I can modify to get it to recognize tcsh and let me log in? or if that isn't the problem, where do I set then the tty name?
I have slackware 64 13.37 Kernel 2.6.37.6 I am trying to install notifcation daemon so I can use notify-send. I am trying to install the package notification-daemon, via sbopkg using the 13.37 repository. I have installed dependencies: ORBit2, GConf, libsexy.I hit this error during installation of notification-daemon.
/usr/lib/libdbus-glib-1.so: could not read symbols: File in wrong format collect2: ld returned 1 exit status
I did previously have gsb gnome 3 installed, but removed that and then lost notify-send.
when i upgraded to slackware-current few days ago i tried to create packages with src2pkg and i get this:
Checking for Makefile rule: 'install' Okay Checking support for DESTDIR (or similar) - Found DESTDIR Installing using DESTDIR - Using: make DESTDIR=/tmp/xf86-video-intel-2.10.901-i486-1 install Notice - Possible error running 'make install' FATAL! Running make install has failed with error: 1 Try using INSTALL_LINE 'make -i install' Exiting...
is it because of i have slackware 32bits i installed src2pkg successfully on slackware 13 but on slackware-current if i remove it and do src2pkg --setup i get error something like cannot live without it every time. when wanting to create src2pkg-helpers.
but i want to know what im doing wrong ?
before i created packages successfully. i execute src2pkg as root
I just did a fresh install of Slackware 13.0 on a Toshiba laptop, and the ONLY thing I did on it after creating a user and switching to init 4 was to run upgrades. After doing so several applications failed to launch, so I rebooted the machine. I get the following error followed by a login prompt:
Code:
/bin/sh: error while loading shared libraries: libtermcap.so.2: cannot open shaed object file: no such file or directory And nobody can log in, including root. I've got another laptop running 13.0 with all the latest upgrades and it runs fine.
Today i download cheops source code and when i type ./configure returns me this error :
Quote: checking for gnome-config... no checking for gnomeConf.sh file in /usr/local/lib... not found configure: error: Could not find the gnomeConf.sh file that is generated by gnome-libs install Is there any way to install cheops in KDE ? Do you know any solution for this problem ?
after install slackware with gnome using gnome slack build it is work fine Except some thing :-
the volume it is not work and get this error ((The volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured. You can remove the volume control from the panel by right-clicking the speaker icon on the panel and selecting "Remove From Panel" from the menu.
No volume control GStreamer plugins and/or devices found.)) and the System Monitor give me this error when i want check the state of memory and processor ((There was an error executing 'gnome-system-monitor': Failed to execute child process "gnome-system-monitor" (No such file or directory)) and the memory flash not work and give me this error ((Error org.freedesktop.DBus.Error.AccessDenied.))
pls delete this post if I should not do this as it is included in [URL]..How do I recover from the 99 error when I start my system? I can only get to my Slackware by booting into it from the Slackware DVD.I have re-run lilo but I keep getting the 99 error on start up.
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element err:alsa:wine_snd_pcm_recover underrun occurred err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
When i install the Authen:Pam module it gives me the same error that i get when i install cyrus sasl2 . So it basically looks like u have to fix the perl module error first how can
I recently downloaded the wine-1.3.16-x86_64-1sg.txz and did an install using: installpkg wine-1.3.16-x86_64-1sg.txz The install appeared to work correctly and I can now type 'wine' and get the version number etc... But, when I attempt to open an .exe file using wine I receive the following error: wine: could not exec wineserver I am new to Slackware (and linux in general); so where do I go from here?
I recently installed Slackware Linux 13.1 , and my Wireless is down. I've only installed 3 Linux disto's on my main laptop (Ubuntu 9.10 , 10.04 , and Crunchbang Linux 9.04 , just had Crunchbang), and they all had the same problem. In all three , I was able to enable Windows Wireless drivers and every thing worked. Now , I'm assuming I have to the same ting in Slackware? Sorry , but I have no idea what my wireless card is. But I know that my laptop is a Dell Insprion E1705. One last thing , I did ifconfig and that wlan0 is my Wi-Fi interface. I typed ifconfig wlan0 up to see if that was the problem. After I did that , I got and error message. Then I typed ifconfig wlan0 down to see if it was down and it made wlan0 down. I tried bringing it up again , but I got an error saying it couldn't find the device specified. Also , how do I install XFCE? I really don't like KDE for some reason and would like to install XFCE. I chose XFCE over GNOME (my favorite) because I want to try something new.
I'm trying to install Puppy 525 on my Slackware 13.37 PC as a dual-boot using LILO. Puppy is living, all on it's own, in sda6, a 6 GiB partition. It got there by using the Puppy Universal Installer and selecting a 'Full' install, not a 'Frugal' install. I cannot find 'LILO' type instructions, only 'GRUB' type instructions.
Has anyone succeeded in doing a hard drive install of Puppy with the LILO boot loader?
Edit: I'll probably regret it, but I used Puppy's GRUB installer.
I'm interested in seeing what others are doing w.r.t. fonts in a standard Slack install. The 2 main apps I use are Firefox and Thunderbird and both look fairly poor out of the box. Previously I've used a combination of gtk-qt-engine and gnome-appearance-properties ( with a gsb install ) but this doesn't always do the 'right thing'.
The system requirements for ESET NOD32 Antivirus 4 for Linux are: Red Hat, Ubuntu, Debian, SUSE, Fedora, Mandriva, and most RPM and DEB Linux desktop distributions. Can this be installed on Slackware? I tried the download and install. Its says that after the install you need to reboot and an 'activate' application will start - it didn't. I used ESET in my prior Windows life and it was great so I thought, why not in my linux life!
(Background: my wireless worked fine for a long time using wicd-1.6.2.1 and then all networks became hidden. The wicd website said there was a bug in 1.6.2.1 and to upgrade.) I obtained wicd-1.7.0.tar.bz2 from sourceforge.net. Slackware man pages recommend "installpkg <name>". I did "removepkg wicd..." and then install. Installpkg said it could not install it because it did not end in .tgz,.tbz,.tlz, or .txz. I changed the name to wicd-1.7.0.tbz(assuming that was equivalent) and did installpkg again. That gave "Verifying..., Installing..., Warning: package has not been created with 'makepkg'. Package wicd-1.7.0.tbz installed." There is no entry for it in the Kickoff Application Launcher. There is an entry for it in /var/log/packages. There is in /etc/rc.d./rc.wicd a script marked executable. Can anyone see what got lost?
I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
i downloaded slackware iso (4.3 gigs, i thought it would be smaller) and then when i tried to burn to dvd it give me read sector error when i tried to verify. i tried this with 5 dvd and none worked so something is probably wrong with the iso itself. is there another way to get slackware to install with a usb flash drive or should i just redownload my iso (10 hour download =( ).
As you know, there is no JDK in Slackware 13.37, there's just JRE. So I wanna install the latest JDK in Slackware. But when I was installing, I failed. The output is as fellow:
[code]....
It looks like a little wired. The commands it cannot find such as cp, basename and so forth are system standard ones. How cannot the installation app find?
I have been trying to install a different window manager on Slackware. I have downloaded from here [URL].. And I have followed this guide to install wmii [URL].. Now when I follow the same patter, I get this error:
Quote: root@sslf:/home/sslf/Essential# ./wmii bash: ./wmii: is a directory root@sslf:/home/sslf/Essential# ./wmii/wmii.SlackBuild tar: /home/sslf/Essential/wmii-3.6.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now root@sslf:/home/sslf/Essential#
If I have a windows installed in raid-0, then install virtualbox and install all my linux os,s to virtualbox will they be a raid-0 install without needing to install raid drivers?
I find im unable to boot any linux distro after installing a nvidia geforce fx 5500 pci card. After a Google search I found what may be a solution but it requires me to edit etc/modprobe.d/blacklist. Can anyone tell me if there is a way to access the slackware install from the install dvd?
