Server :: Unable Able To Do Complete Cluster Configuration
Feb 1, 2010
I m Not able to do complete my cluster Configuration. I have done my Cluster configuration but when i m running the system-config-cluster command the cluster configuration window appear, but after closing the window it is giving me the following error [root@node1 ~]# system-config-cluster. # when the window opens, I get the below error. When I did a search everthing pointed to the 2 rpms. I verified the version of the rpms cman and openais, they are:
cman-2.0.98-1.el5
openais-0.80.3-22.el5
error code res was not 0, it was 1 error string was /usr/sbin/cman_tool: Cannot open connection to cman, is it running? When I try to issue service cman start, I get the error:
Newly trying cluster configuration setup on RHEL5.3_64 bit machine.Basic Requirement :Need to Configuration GFS file systemHerewith I have shared details:
System : > I have 2 HP proliant Dl385 server. > Both system are connecting on Public network. (eth0) > I have connected eth1 - directly each other system like a Private Network (May be I am
I'm having a very strange problem with red hat cluster. After testing it in the lab, I tried to install a new cluster and received the following error: cman not started: Cannot start, cluster name is too long or other CCS error /usr/sbin/cman_tool: aisexec daemon didn't start I've checked the internet for that error, but nothing. I decided to to take the example from cluster.conf man, which looks like that :
[Code]...
And still I get the same error. I can find my servers both from DNS (FQDN and short name) and they also appear in /etc/hosts.
I am trying to setup Rocks Cluster on a Cluster containing 1 Master node and 23 slave nodes connected via a Switch. The master node's eth1 is connected to public IP and eth0 is connected to the slave nodes via the switch.
I was able to install the Rocks cluster on the machine, I configured the IP for master through DHCP. When I run the command 'insert-ethers' on the master node, it doesnot get me any slave nodes.
I want to create redhat cluster on(vmware) OS Redhat Enterprise Server 5.5 Install Luci on node1 Install ricci on node2 Install ricci on node3
All the computer name records in all system host file. When I try to create new cluster( luci_install init) then showing error... Status messages: * Host stationx.example.com is already authenticated * Host stationy.example.com is already authenticated [dismiss]
The following errors occurred: * Unable to create the cluster Luci database objects ***No any cluster.conf file created on any node I have reinstall the node, but getting same error.
I am new to clustering. I have created this scenario on VMware Workstation after reading numerous links and videos.
Few of them are [url] [url] [url]
Code:
I am using a shared GFS2 filesystem mounted on /data for this purpose which is from openfiler.
Code:
I am trying to create a HTTP cluster so that if in case of one node fails - Shared partition (/data) in my case gets mounted on the other node - Also, HTTP services can be started on the other node.
/data has the index.html file which is read by HTTP. Also, I have configured HTTP such that it only listens to 192.168.1.100 (shared IP) on port 80.
Code:
I have configured the cluster, service "sharedIP" which has IP 192.168.1.100; I took help of this doc.
Code:
Member Status: Quorate
I have tested the service sharedIP failover by powering off the machines one by one.
I used the below command for failover
Code:
Now, I need to try running apache from shared IP 192.168.1.100 which will fetch file from /data/index.html
I tried no. of times to configure service and resource for apache.
But somehow, it is not happening. My apache bin is /usr/local/apache/bin/apachectl start|stop
I have given such long info to help some other newbie. I will certainly write a HOW-TO for this.
I am trying to do the cluster storage with the Rock Cluster storage operating system . I have install the rock cluster on the main server . and I want to connect the client with the PXE boot . when I starting the client then it boot from the PXE boot into the mode of compute node. but it ask the where is to be stored the I have give the path..then server says that not able to find the directory path.
Steps:- 1) insert-ethers 2) client is started with the PXE boot. 3) it detects the dhcp . 4) At last it demand where is to be started by cd-rom, harddisk ,nfs etc.
then I started with the nfs and I have given the lanIp of server.and server is detecting the client but client is not finding the filesystem directory. into export partition directory but it is not taking path.
PATH:- /export/rock/install it is not finding this path then it is not able to start the o/s from PXE boot..Is there any solution and manual of rock or anyother solution then u can reply to me...
when i do a paravirtualised install coz fully grey out (how do you get round this) and ftp install path is ftp://192.168.1.1:65354/bie764.iso
i get error:
Unable to complete install 'exceptions.ValueError Invalid install location: Opening URL ftp://tj:tj@192.168.1.1:65354/bie764.iso failed. Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/create.py", line 724, in do_install dom = guest.start_install(False, meter = meter)
[code]...
does it not accept ftp passwords.. what ftp server program (with autostart so it works with crossover linux as i know no other way start apps with that. can try to insta wine but need rpm) will work
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
I need to setup an linux cluster ..so i prefer ubuntu because of support and i personally i use ubuntu.. and can any one explain in breif ..what all the things needed to setup an ubuntu based cluster my configuration for each node will be (totally 6 nodes) core2 duo with 4 gb ram i need 4 nodes and 2 for load balancing..
I am trying to build GFS2 cluster with 2 or 3 Fedora 14 nodes, but I've encountered some problems from the start. First luci does not work at all in Fedora 14. There is no luci_admin and even if I manage to start luci service, I get a blank white screen when I try to open it from the browser. I've googled a bit and found that I'd might be able to setup GFS if I manage to build cluster.conf manually and start the cluster suite, but I cannot find documentation on how to create cluster.conf anywhere. If anyone knows how to setup GFS2 without a cluster suite or how to configure cluster.conf.
I am working in a project that needs to set up an Apache Web Cluster. The cluster needs to be High-availability (HA) cluster and Load-balancing cluster. Someone mentioned the use of Red Hat Cluster Suite, but, honestly, I can't figure out how it works, I haven't been able to configure it correctly. The project currently have two nodes, but we need to support at least three nodes in the cluster.
I had my laptop turned on. The battery turned out low and my pc shut down (not in the correct way obviously)! Plus: I was running apt-get upgrade but it should have done before shutting down. Now, I restarted my pc and under nm-applet I see: "wireless network: device not ready" and at login I get the message: "Network configurations failed. org.freedesktop.dbus.error.spawn.PermissionsInvalid: the permission of the setuid helper is not correct" and that I could not be able to connect via bluetooth (but actuallyu I can't use wireless!)! What to do guys? I use debian squeeze. I read from someone using kubuntu that he solved the problem reinstalling all the packages with "dbus" in their name. But I don't know if my ethernet will work yet!
Update: if I run dpkg-reconfigure dbus, it tells me that dbus package is corrupted or not complete: could be the issue?
I just expanded my raid 5 array from 3*2TB to 4*2TB and mdadm made the grow successfully and shows an md0 dev with the size of 6TB usable data. Now my problem is that Debian (Lenny) dosnīt show the right amount. See below
######### MDADM DETAILS OF ARRAY ########## > mdadm --detail /dev/md0 /dev/md0: Version : 0.90 Creation Time : Mon Dec 14 22:30:46 2009 Raid Level : raid5
as my laptop is getting older and slower, I deactivated the nice window effects. System -> propieries -> appereance -> no effects.But Ubuntu reactives them after the next reboot!Is there any configuration file or do I have to uninstall compiz-core complete?
I did a fresh install (the installer erased 10.04 and installed 11.04) of Natty. Now as soon as I boot into Ubuntu I get the error "There is a problem with the configuration server....exited with status 256" This comes up before the log in screen, and once I type in my password, after as well.Also, I'm getting the error The configuration defaults for GNOME Power Manager have not been installed correctly.contact your computer administrator.
I cannot log in. I just get sent back to the log in screen.I have searched and searched for a solution to both of these errors, and it seems that no one can find a solution to the configuration server error.
Decided to upgrade my 8.04 server to 10.04 today. Everything went smooth when I tried to install in vmware. When I tried to install it on my real machine the installation hangs at 74% Storing Language...
I've checked the disk and I tried different ways to install (different language, both keyboard and system). The first two attempts the installer just turns off and the computer reboots. This third time it just hangs. how to debug and solve this problem?
It's the x86_64 version. I'm using the standard options all the time including LVM on whole disk.
I am running ubuntu 8.10 on an old gateway as a server. I have vent up and running just fine. I went to configure the ventrilo_srv.ini file and now that I have made the changes, I need to restart the server program, which I am having problems doing. The following command returns the following:
sudo /home/taylor/ventrilo/ventsrv/ventrilo_srv restart Ventrilo Server - Public - Version 3.0.3 (c)Copyright 1999-2008 Flagship Industries, Inc. Unable to open configuration file 'ventrilo_srv.ini'. ERROR: Unable to read configuration data. Exiting.
What am I doing wrong? Did I change something that shouldn't have been changed. I only set the name to something other than default and set the admin password.
Does anyone have any experience with clustering KVM? I know how to do this for Xen, but I would like to know if it can also be accomplished with KVM. I am looking for a solution that is not specific for a distro.
Can a Cluster, made up of 5 Dell Poweredge computers, each with a NIC and a HDD, be a file-server that is highly available? If I go over, and break one of the computers with a sledgehammer, will the cluster continue to operate without data loss?Goes on to say how fancy the cluster is,
My internet connectivity is not that fast. Since I am using Squeeze, there will be very frequent updates.
My problem is that I am not able to download all the update in one go and to complete the upgrade. As the number of files to be downloaded and upgraded increases, I can't seem to be able to reach the end point to complete any update.
Can aptitude upgrade just the files that have been downloaded so far, and resume downloading the rest in the next attempt? MS Windows will update the OS with whatever patches downloaded without waiting for the rest if I prematurely shutdown the pc.
I Have not been able to complete an update since i clean installed Lynx: Perhaps you'l understand my situation better than me by looking at these messages:
"Not all updates can be installed Attempt a partial ingrade?" When i attempted a partial upgrade, It will hang all day at:
Setting up libgdatal.4-cil (1.4.0.2-3) Installing 14 assemblies from libgdatal. 4-cil into Mono. Another mssge i get is. Software index is broken
It is impossible to install or remove any software. Please use the package manager "Synaptic" or run "sudo apt-get install -f" in a terminal to fix this issue at first.
nnjond@nnjond-desktop:~$ sudo apt-get install -f [sudo] password for nnjond: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. nnjond@nnjond-desktop:~$ nnjond@nnjond-desktop:~$ sudo dpkg --configure -a Setting up libgdata1.4-cil (1.4.0.2-3).
* Installing 14 assemblies from libgdata1.4-cil into Mono
I am unable to complete the installation of Slack 13.0 on a new machine with Intel DH55HC motherboard and Intel Core i5 750 processor. The installation proceeds smoothly until the 3'rd CD and then hangs at the FONTCONFIG UPDATE stage. The hung process is apparently rescan-scsi-bus which reaches this stage
"Scanning host 6 channels 0 for SCSI target IDs .... "Scanning for device 6 0 0 0... "NEW:
It is not possible to kill this process even with "kill -9". I have to kill the parent process which is Slack setup, so the installation is incomplete. There is another recent thread on this issue [URL] but it did not resolve my problem. How to correct or bypass this difficulty (maybe another kernel? I use the default).
I'm trying to install Ubuntu on an Aspire laptop with Windows XP. I downloaded 10.04 and burned an ISO image. I boot Windows and open the ISO disk. I open the first choice which is to try Ubuntu prior to a complete installation. The installation starts and proceeds for a few minutes. Then it stops and displays a message 'Permission Denied' and a suggestion to check the installation log. The last few lines are:
I installed ubuntu 10.04 by wubi. It works perfect until I installed and ran "startupmanager". I find that I can't enter ubuntu, even in recovery mode. The screen keeps showing "rstslog main process ended, respawning [fail]" and other text
