I am trying to create a 2nd node from last couple of days but no luck.do this.I have gone through these article again and again:Here is my setup
node1 ( ricci + luci) : which is working fine
node2 (ricci only) : this is giving me problem
node1
[code]...
I have two node redhat cluster for mysql database.The problem is that after updating the packages on both of the nodes after and previously the sevices was not able to relocated on second one , even rebooting the server the problem occurs.While starting the service on second node it started on the first one.Other services are running fine on both nodes.I have checked the /etc/hosts, bonding and many more files and seems to good.find the log for reference.
<notice> Starting stopped service service:hell
Oct 22 14:35:51 indls0040 kernel: kjournald starting. Commit interval 5 seconds
Oct 22 14:35:51 indls0040 kernel: EXT3-fs warning: maximal mount count reached, running
[code]...
I want to create redhat cluster on(vmware) OS Redhat Enterprise Server 5.5
Install Luci on node1
Install ricci on node2
Install ricci on node3
All the computer name records in all system host file. When I try to create new cluster( luci_install init) then showing error...
Status messages:
* Host stationx.example.com is already authenticated
* Host stationy.example.com is already authenticated
[dismiss]
The following errors occurred:
* Unable to create the cluster Luci database objects
***No any cluster.conf file created on any node
I have reinstall the node, but getting same error.
I was given task to install redhat linux os on one of the compute node on server which doesn't have cd/dvd drive or usb port.I have installation media as well ISO image. This server is on network, so I can access it via my PC which is running window 7.I think, I have 2 choice to install:1. Copy iso image to head node on server and then install linux os on compute node via nfs.r2. Use my PC dvd drive to install linux on compute node via network.But I don't know how to do it.
View 2 Replies View RelatedI don't have much experience in clustering. And I'm deploying a cluster system on CentOS.But I don't know how long a node failover and another node take over those resouces to continue running service is good, fast or slow? 1s, 10s or
View 2 Replies View RelatedI am (and still) trying to create a 2 Node cluster on Centos5.2 with a Dell MD3000 as a storage. However I am getting this when I try to probe for storages in luci: An error has occured while probing storage:
<?xml version="1.0" ?>
<dict name="result">
<var name="diff" type="num" value="24"/>
<var name="max_inactive" type="num" value="600"/>
[code]....
And I also get errors on /var/log/messages end_request: I/O error, dev sdf, sector 0 Buffer I/O error on device sdh, logical block 0
I have created a simple menu driven script for our Operations to take care of the basic monitoring and managing of our production application from the back-end. Now, the script when tested in UAT environment was fine, but when deployed to production it kind of behaved oddly.hen the Operator chooses an option from the menu he is given the output and at the end is prompted to return to the main menu by using ctrl+c. In production, this return does not occur for some strange reason and the program just sits there.The session becomes unresponsive after that and I'm forced to terminated it by closing the PuTTY.I tried enabling the debug mode too (set -x) and still was not able to find any useful hints/trails as to why.
View 5 Replies View RelatedI am familiar with windows 2008 cluster servers, and I just started testing with centos cluster. I am creating a simple 2-node cluster, for a simple ping test.
Node 1: 10.0.0.1
Node 2: 10.0.0.1
Virtual ip: 10.0.0.10
So far, I can ping a virtual ip, and manually relocate it between the nodes, but I didn't figure out, how to do this automatically. So this is my question: How can I setup the cluster, to it automatically failover the a service to another node case one node fails?
I am having an issue with LVM on a 2 node cluster. We are using powerpath for external drives. We had a request to increase /apps filesystem which is EXT3.
On the first node we did:
pvcreate /dev/emcpowercx1 and /dev/emcpowercw2
Then....
vgextend apps_vg /dev/emcpowercw2 /dev/emcpowercx1
lvresize -L +60G /dev/apps_vg/apps_lv
resize2fs /dev/apps_vg/apps_lv
Everything went on well , we got the /apps increased. But on the second node when I do pvs.
I am getting following error:
WARNING: Duplicate VG name apps_vg: RnD1W1-peb1-JWay-MyMa-WJfb-41TE-cLwvzL (created here) takes precedence over ttOYXY-dY4h-l91r-bokz-1q5c-kn3k-MCvzUX
How can I proceed from here?
I am using Centos. I have read places that you can use Drbd + heartbeat + nfs to make a simple failover NFS server.I can't find any document that works though. I've tried 20 or so, including some Debian ones.So, does anyone have any other ideas of how to do this?Point me in the right direction please.I want 2 nodes. One to be actively serving an NFS share The other to be ready for failover. If the first one goes out, the second takes over.Meaning, the filesystem is in sync, the IP must change, and NFS must come up
View 7 Replies View RelatedI'm having some trouble configuring clustering in a 2-node cluster, with no shared FS. Application is video streaming, so outbound traffic only...The cluster is generally ok - if I kill -9 one of the resource-applications, the failover works as expected. But it does not failover when I disconnect the power from the service owning node (simulating a hardware failure). clustat on the remaining node shows that the powered-down node has status "Offline", so it knows the node is not responding, but the remaining node does not become the owner, nor start up the cluster services/resource-applications. eth0 on each node is connected via a crossover cable for heartbeat, etc. Each eth1 connects to a switch.
[root@lmshw01 ~]# cat /etc/cluster/cluster.conf
<?xml version="1.0"?>
<cluster alias="lmshw-clust" config_version="35" name="lmshw-clust">
[code].....
I have a two node cluster, and a third system which has luci installed.
node1 is nfs0
node2 is nfs1
both nodes have identically the same configuration. They have a fresh installation of Centos 5.5 + yum update. I am unable to join nfs1 to the cluster, as it is giving me the following issue:
Sep 29 23:28:00 nfs0 ccsd[6009]: Starting ccsd 2.0.115:
Sep 29 23:28:00 nfs0 ccsd[6009]: Built: Aug 11 2010 08:25:53
Sep 29 23:28:00 nfs0 ccsd[6009]: Copyright (C) Red Hat, Inc. 2004 All rights reserved.
[code].....
Newly trying cluster configuration setup on RHEL5.3_64 bit machine.Basic Requirement :Need to Configuration GFS file systemHerewith I have shared details:
System : > I have 2 HP proliant Dl385 server.
> Both system are connecting on Public network. (eth0)
> I have connected eth1 - directly each other system like a Private Network (May be I am
[code]...
I am trying to rock cluster for the large computing. my all slave node connected with rock cluster master node. but I want to run the graphical application on the cluster node. I am not getting this point .
View 5 Replies View RelatedI need to build a 3 node web server cluster to run a php application. Since the app requires users to login (which means a session state is to be maintained), I will be sharing sessions save path, I also need to share the application directory across 3 nodes. I having trouble deciding which cluster file system to select.
View 5 Replies View RelatedI've build a home-made small cluster built up of a master and 1 disk-less slave node.Lately it happens that the node 1 fails to start, reporting the following message:
IP-Config: Complete:
[ 12.318051] device=eth0, addr=192.168.100.21, mask=255.255.255.0, gw=192.168.100.2,
[ 12.414252] host=192.168.100.21, domain=mydomain.com, nis-domain=(none),
[code]...
I'm trying to build cluster computer system using redhat linux enterprise 5.5. And I'm on the step to set up the NFS mounting. (step 3 of part VI on this paper: However, I kept getting "permission denied" when I used the command "mount -t" to mount the slave node onto the hard drive of the master node. Even when I edited /etc/fstab file to make it automatically set up during booting, I still receive the same result. By the way, I've already logged in as a root user on both slave and master nodes.
View 1 Replies View Relatedwhat rpms should I need install for setting up redhat cluster on RHEL 5.0 I want to create two RHEL 5.0 nodes as one cluster having oracle database server installed. And please note I have created these two nodes on VMware server for testing purpose. is it possible for creating cluster of two virtual guests.
View 3 Replies View RelatedI am planning to configure RedHat cluster on vmware, i dont know how to configure, i googled a lot but couldn't find satisfactory docs for configuring, can any one provide me step-by-step or good docs to go ahead.
View 1 Replies View RelatedI run a compute cluster with only a few users. Occasionally a user will accidently run a job on the master node that runs out RAM/swaps then hanges up for a while.In /etc/security/limits.conf I have set memlock to 7.5GB (master has 8GB RAM) and maybe that is what lets the machine come back rather than hanging completely? Is this the right setting to physocally limit a single user from asking for more RAM than the system has and bringing down the system? Should I set this to 2GB or so or is there something else I can do??
View 4 Replies View RelatedI have added apache application into redhat cluster. If the apache process failed, it will cause the service group fail over. I want to disable the application monitoring. I search throung Internet and it depends on the apache init script. If I change /etc/init.d/httpd status always return 0(success). THe service group will not fail over even apache failed.
However, I want to remain the application monitoring but stop failover. If the application like apache failed, I want Redhat cluster to try restart the application like 3 or 4 times. If restart failed, it will not failover.
We have a set of two production machines running Oracle databases. There are a couple of SAN attached filesystems of which one of them on the one machine (node1) is created as ext3 and nfs exported to the second machine (node2). However,during certain conditions related to rac, the interconnect between the two nodes lose connection and due to the loss of communication the servers will reboot. The problem however is that node2 usually reboots first and by the time it starts up, node1 is not up and running yet, thus causing the nfsmount to not be available on node2. I have put my head around some options on how to get the servers to automatically resolve this, however I am posting my question here as someone might have a reliable way of managing this. My one idea is to create a script on node2 to mount the nfs filesystem, create ssh key authenticated user between the nodes and then put another script in place on node1 as part of the startup to ssh to node2 and mount the filesystem.
View 1 Replies View RelatedIm having a frustrating issue with my two machine cluster I setup using Conga. Everything was working great except now when lucci starts mysql the port (3306) is never opened to outside machines. I can do a "ps -ef | grep mysql" and see it running as well as login to mysql on the node it is running on - but an nmap of the machine does not show the 3306 port and I cannot login to mysql remotely and yes I turned off all iptables(iptables,ip6tables) and SElinux is disabled.What am I missing here? If I start mysql on my own (and it is using the same my.cnf as lucci is) it does show the port open and works perfect,t for some reason when lucci starts it, no dice
View 1 Replies View Relatedafter few days of hard work about redhat cluster and piranah, i have done 90% hopefully,but i am stuck with iptables rulesi am attaching full piranah server screen shot of my network .please have a look and please tel me, what else to do in piranah server ...a) from firewall (Lynksys) what ip shall i forward port 80 ?? ( 192.168.1.66 or 192.168.1.50 ??)b) Currently its looks like http request is not forwarding from Virtual server to real server , what iptables rules shall i write ?(Please have a look to iptables rules)also, this link for my piranah server setupi guess i am stuck somewhere where i need some experts eye to catch it upso please look at the all the pictures , ifconfig and iptables rulesifconfig :
ifconfig
eth0 Link encap:Ethernet HWaddr 00:0F:3D:CB:0A:8C
inet addr:192.168.1.66 Bcast:192.168.1.255 Mask:255.255.255.0
[code]...
I have lack of understanding of CentOS in general. I have looked for a remedy on other forums and google, but haven't been able to find the answer. I have a 3 node cluster that was functioning great until I decided to go offline for awhile. My config is as follows:
node 2: vh1
node 3: vh2
node 4: vh6
All nodes connect to a common shared area on an iscsi device (vguests_root)
Currently vh2 and vh6 connect great, however since putting the machines back online I can no longer connect with vh1. A dmesg command on vh1 reveals the following:
GFS2: fsid=: Trying to join cluster "lock_dlm", "Cluster1:vguest_roots"
GFS2: fsid=Cluster1:vguest_roots.2: Joined cluster. Now mounting FS...
GFS2: fsid=Cluster1:vguest_roots.2: can't mount journal #2
GFS2: fsid=Cluster1:vguest_roots.2: there are only 2 journals (0 - 1) .....
I want to setup two node http cluster,
View 1 Replies View RelatedI'm building a 3-node cluster. I have created ocfs filesystems and mounted them on the first two nodes. But while mounting them on the third node , i'm getting this error for 8 of the total luns. all these 8 luns are of 1GB size.
I've unmounted these 8 luns from the other node and tried to mount in the third node ... and then it was working and again the error occurs in the second node. My observation was for some reason these particular luns are not allowing the third node.
mount.ocfs2: Invalid argument while mounting /dev/mapper/voting1 on /voting1. Check 'dmesg' for more information on this error.
dmesg output was :
I'm using RHEL 5.4
I want to configure two node cluster for qmail-toaster?? My idea is.. if one server hardware gets failed it should transfer/migrate service to other qmail-toaster server with all settings like ... domains/users/password etc etc.
View 2 Replies View RelatedUsing google with search option: cman not started: Can't find local node name in cluster.conf /usr/sbin/ cman_tool: aisexec daemon didn't start.I found this URL...I have found the config_version in cluster.conf. Unfortunately, as everyone may have noticed, english is not my native tongue so I am having trouble understanding the part "Make sure you bumped the cluster config version number". Can anyone enlightened me on what should I be doing so that I could "bump" the cluster config version?
View 3 Replies View RelatedI need to setup an linux cluster ..so i prefer ubuntu because of support and i personally i use ubuntu.. and can any one explain in breif ..what all the things needed to setup an ubuntu based cluster my configuration for each node will be (totally 6 nodes) core2 duo with 4 gb ram i need 4 nodes and 2 for load balancing..
View 1 Replies View Related