Fedora :: SNMPwalk / SNMPget Binary Path - File Not Found
Jul 24, 2009
Just upgraded from UBUNTU to FEDORA 11. Installed most add on programs such as cacti & mysqld using YUM INSTALL. With help of 'scottro', I finally got cacti running, but still finding errors (most problems caused by different directory locations in this particular distro).
snmpwalk Binary Path
The path to your snmpwalk binary.
[ERROR: FILE NOT FOUND]
snmpget Binary Path
The path to your snmpget binary.
[ERROR: FILE NOT FOUND]
snmpbulkwalk Binary Path
The path to your snmpbulkwalk binary.
[ERROR: FILE NOT FOUND]
snmpgetnext Binary Path
The path to your snmpgetnext binary.
[ERROR: FILE NOT FOUND]
Does anyone know where are these directories located in Fedora (11)? Is there a way to find where a directory is located (normally i use 'whereis' )? No such problems when using UBUNTU...
running Windows 7 64bit with VMware Workstation 7.01-build 227600. I have some knowledge of Linux, I have installed f12 and have updated the system as of 03/22/2010. All updates completed successfully.
1) How do I install VMTools on the f12 (after mounting the CD/DVD tool package)
2) How do I update the gcc files it says are dependencies?
Here's what I get on installation:Before you can compile modules, you need to have the following installed...
make gcc kernel headers of the running kernel
and then I am prompted for this input from the install script:
Searching for GCC... The path "" is not valid path to the gcc binary. Would you like to change it? [yes]
and this is where I get stuck. How do I get around this or satisfy the requirements for the install?
I use snmpv3, and experiencing problem in passwords containing special symbols like "!". For Ex.: snmpwalk -v 3 -a SHA -A xxxxxxx!xx -l authPriv -u user -x DES -X xxxxxxx <IP address/Name of device> -bash: !xx: event not found I also tried using "" before "!" in passwords for ex. xxxxxx!xx, but then I have failed authentication.
i can download but i cant run anything because there is no ar file path for ark. please dont tell me to download something to get the ar file path because if i download it i can't open it
Is it possible to get the path of a process running under Mono in Linux? For example if I launch KeePass using mono KeePass.exe, running ps just shows the command name as mono, while what I really want is KeePass.exe.
I have Centos 5.4 installed on my dedicated blade server.. (I thought I had some other OS - ignor SUSE 10.1 opps) I'm trying to install ImageMagick - I didn't find it on my server i did do what they said but not there..
1. I downloaded the file to the ROOT (i hope that the right Place) 2. cd ImageMagick-6.6.0-5 3. ./configure 4. This ERROR CAME BACK
I am trying to install Apache on my remote server. I've downloaded the latest Apache Http Server and when I configure it I get this error: configure error: No acceptable C compiler found in $PATH. So I download and extract the latest GCC Compiler and when I try to install that I get the same error:
configure error: No acceptable C compiler found in $PATH I am really stumped... Can anyone just offer ideas. My server is running CentOS 5.4 x64 and I'm remotely trying to download and install a running LAMP setup for Joomla. I'm using a shell to communicate with a cloud server type.
I'm pretty new at working with Linux/Unix systems, just started dealing with the CLI a week or two ago at work so bear with me if my questions/problems seem obvious, they probably aren't to me. URLs are at the bottom since I can't hyperlink to them. We have a server with Red Hat Enterprise Linux Server release 5.2 (Tikanga), x86_64 GNU/Linux. For the past few days at least (not sure when it began) every five minutes we get two messages for CPU0 and CPU1 saying: "Temperature above threshold, cpu clock throttled". Occasionally it says they are normal, so they're not *always* above the threshold but a majority the time.
The server doesn't have internet, so I interact with it and transfer files via ssh/telnet/sftp from my Windows PC to another server running Fedora release 10 (Cambridge) to the RHEL5 server. I have been trying to install lm_sensors to try and read the CPU temperature and possibly the fan speed, but every installation method has failed. I have tried installing it via the yum command I read about on this page (URL 1), but since it doesn't have internet access it didn't work. I then tried manually installing using the instructions on the lm-sensors.org page (URL 2), but whenever I try to install anything (gcc, libtool,
libsysfs) it shows: checking for gcc... no checking for cc... no checking for cl.exe... no configure: error: in '/home/user/src/libtool-2.4': configure: error: no acceptable C compiler found in $PATH
I then looked up how to install gcc, but when I found a .rpm file of gcc 4.1.2 for RHEL5 I tried installing that like it mentions here (URL 3), but there are lots of [dependancy] programs I can't find a .rpm for as it seems they are all outdated and hard to find for RHEL5. Do I need to find the installation CD in order to install gcc? And is there any other way to check the cpu temperature or to know how to disable/fix the messages about temperature being above threshold?
I gave sda1-2 for windows and sda 3-4-5 on an extended partition for my linux OS. I installed ubuntu on sda 7 (when I go into disk utilities it shows up as sda 7 idk why) alongside another ubuntu on sda 5 ( EXTENDEDPARTITION : sda 5-6-7 ) so I could remove mandriva bootloader.Since I did, I removed ubuntu (sda 7) since it wasn't necessary but after it gave me the grub file not found.Obviously yes, since GRUB was installed from sda 7 but i have another grub.conf on sda 5 and I would like to know how to change the path of the grub reader to sda 5? or must I install all over again de grub loader?
I'm new to Fedora, and haven't used any flavor of Linux in years. I'm attempting to run a few benchmarks that were given to me by my instructor, but every one I try to run gives an error "Cannot execute binary file". For instance,.inp.inThis command gives an error:bash: ./Mcf: cannot execute binary fileIt is not a permission problem, I have confirmed the file has execute permissions (one of the things I still remembered after all these years). I suspect all the benchmarks I have been given were compiled on Ubuntu. Would this be causing the problem? I do not have access to the source code, so I cannot recompile. If that is the problem, is there a way around it that doesn't involve throwing away a weekend and starting fresh on Ubuntu?
I found a Linux .x86 binary file that I've been looking for, but not sure what to do with it. Does this (*.x86) binary file format seem like something that could simply be run by command, or something that would need to be compiled first? There is not much information that I could find regarding the particularly file.
I want run binary files but shoot my errors that "Cannot Execute Binary file" I try with ./file, bash file etc i'm using fedora12 with KDE Desktop this happends with all binary files
I tried to restart my httpd service.cannot execute binary file seems like the HTTPD wasnt stopped while it should be stopped. it skipped the 'stop' and just right away jump into 'start' command. my case is i just changed some php.ini configuration, and to have it changed i need to restart after changes.am i correct if i say my '/bin/rm' and '/bin/touch' files are corrupted?
I'm taking here about tins of directories, thousands of files. I'm looking to find a command that makes me able to move the results above to another path, and to create that path once it doesn't exist like below:
I'm installing FreePBX for one of the servers at my work. Im having problems and theres error's coming up saying "amportal binary can not be found" has anyone else had an error like this? Because the installation was going through a tunnel before and the router died so I tried it again by having the installation file locallaly on the machine and then the amportal error comes up towards the end of the installation, But I do a locate, and the file is actually there,
Originally Posted by Gekitsuu you should be able to do NEWSTRING=$STRING1$STRING2 it works but i can't use it for creating a path variable / file name.
e.g. $STRING1 = path $STRING2 = filename cat $STRING1$STRING2 will not work. so how to get this working?
I'm using fedora 13 to connect to my server's share folder(windows server 2003) and i found that i can create folder,create file, access and open or delete the file in the window share folder, but i can't save or replace the file in the share folder. the error message is like below...there are error copying file into smb://path/folderShow more detail: Invalid argumenti also have attach the pictureby the way....i had disable the firewall and selinux already....but still can't save the file into the window share folder.previously i use fedora 11 and all is ok with no problem, but the fedora13 got this problem, please tell me what cause this happen?
I have a problem with snmp answers being empty or having spaces.
What I already have:
#get all interface indexes (if you wonder - I'm working for a cable company and different cablemodems have different number and types of interfaces):
The problem is the physical address which is sometimes empty and the description which has spaces. So I'm doing 2 snmpgets which is slower than 1 snmpget (sometimes I have up to 18 interfaces).
I'm trying to explain it a bit simpler.
Interface 5 gives me back the following lines:
Ethernet CPE Interface
Now the first line should go into variable ifadm, 2nd line should go into variable ifoper, 3rd line should go into variable ifspeed, 4th line should go into variable iftype, 5th line (which is empty) should go into variable ifphys and finally 6th line (which has spaces) should go into variable ifdescr
I have added the smbd file location to the path of root. I can now execute it from any location. I noticed after reboot of the machine (RHEL 5) that this file location is no longer in the path. How do I make this permanent?
I have installed CentOS 5.5 and included the java development package. When I typed java -version, I got java 1.6.0. The problem is with the javac command, which is not found. I tried the following:
I am having problems with scp during a backup operationI added a ps -ef before and after the scp operation used during the backup.The backup is a script to backup a Zimbra ServerI am including the code segment that I am having problems
Code: # DRCP Section. To scp newly created archives to a remote system if [ "$DRCP" = "yes" ]
