I have ubuntu9.10 installed inside windows Thunderbird works ok in windows. When i try to get my email in ubuntu9.10 i get this message. server responded authentication failed.
View 2 RepliesI was trying to send a 4000+ mass email with Thunderbird, when it popped up an error saying that such and such email was no longer a customer and halted the program. Is there a plugin for Tbird that deletes these "bad" email addresses out of the Bcc line when sending? It would take a long time to go through the emails deleting customers that no longer have email addresses.
This was also done using outlook and the error did not happen.
My company email server has been working flawlessly for the last 5+ years. Recently, one of our clients put their email server behind a firewall (an assumption on my part; details below). Ever since, email sent from within the company (192.168.xxx.xxx internal address; all computers and server is behind a NAT firewall [Netgear FVX538]) is either being sent to the client after some delay (if email is sent using Outlook) or is being deferred until the messages expire (Thunderbird, Squirrelmail, etc.). Email sent to the client from anywhere outside the company (using Thunderbird, Outlook or any other email client) is also delivered without any problems (usually after a short delay).
All other emails to the World are being sent without any problems at all (both inside and outside the company; using any email client or webmail). I did contact the client's postmaster, but the client, being a large government agency, will probably not address the problem (if it is on their side) anytime soon. I am not sure if I can do anything from my end to solve the problem. Ever since the problem with the client began, I added two statements to the postfix configuration file (smtp_pix_workaround_delay_time = 20s and smtp_pix_workaround_threshold_time = 0s); this seemed to a bit - it reduced the delay for emails sent via Outlook to a few minutes (as opposed to 30+ minutes); emails sent using Thunderbird/webmail are still being deferred.
Server details: Dual quad-core processor machine, 32 GB RAM, dual 1 gbps network, running Fedora 14 (64-bit; loosely modeled along the lines of Perfect Server (with ISPConfig2) as described on the howtoforge website). Running Postfix (v. 2.7.1), Dovecot (v. 2.0.9).
Postfix details:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
body_checks = regexp:/etc/postfix/mbl-body-deny
broken_sasl_auth_clients = yes
command_directory = /usr/sbin
[code]....
I emailed the client's postmaster suggesting they disable smtp fixup. But still, what bothers me now is that Outlook works (both within and outside the company) while Thunderbird, webmail, etc. (used by ~90% of the users) do not. In addition, all email clients from outside the company can send email (authenticated via the company server) to the client without any problems. Is there anything I can do on my end to make non-Outlook clients work within the company (webmail is hosted on the company server; so, it would have an internal address as well)?
i have a small issue, to make our network more secure, i now require outgoing email to require authentication. Now the problem..i have a automated mailer that does not have the option to authenticate. is there a way to allow a certain email address or the local network to send out without authentication? If i cannot do this for a single email user to allow them through with authentication, how would i remove the authentication paramaters in the postfix smtp..
View 2 Replies View RelatedAfter updating to kernel-2.6.33.6-147.fc13.i686, my email (Thunderbird) fails to connect to the pop-server, and webpages (Firefox) load VERY slow, if at all.When I go back to kernel-2.6.33.3-85.fc13.i686, I have no problem at all.Network chipset: RTL8180
View 2 Replies View RelatedWhen I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
I have intalled RADIUS server on one machine which has fedora 10. I have installed freeradius-server-2.1.10 on it(server machine IP 10.150.110.42).
I have one more machine with redhat linux on which i have installed pam_radius-1.3.17(client machine IP 10.150.113.4).
I have done the follwoing configuration at both sides
SERVER SIDE.
users file
"vijay" Auth-Type := Local, Cleartext-Password == "123qwe", NAS-IP-Address == "10.150.113.4"
Reply-Message = "Hello, %u"
[Code]....
Above mentioned is my configuration. when i try to connect client with SSH it is not sending a request for authenticating user to RADIUS server. what else configuration i have to do, or if there are any mistakes in my configuration
If your machine is connected to the Internet, you'll probably want to disallow ssh password authentication (which is advised but not mandatory). Edit the /etc/ssh/sshd_config file and change/add the following lines:
PasswordAuthentication no
AllowUsers nx
Don't forget to restart the sshd daemon after making that change: service sshd restart I already have PasswordAuthentication yes in my file as I need it to login to the server through ssh. Do I just skip that line and only add AllowUsers nx mynxuser at the end? Also, I followed the rest of the manual and when I tried the client on Windows it failed: I put in a user and password to login but shouldn't it be using the key instead? I think the problem is related to the above due to:
Quote:
NX> 203 NXSSH running with pid: 1428
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
[code]...
I use snmpv3, and experiencing problem in passwords containing special symbols like "!". For Ex.: snmpwalk -v 3 -a SHA -A xxxxxxx!xx -l authPriv -u user -x DES -X xxxxxxx <IP address/Name of device> -bash: !xx: event not found I also tried using "" before "!" in passwords for ex. xxxxxx!xx, but then I have failed authentication.
View 2 Replies View RelatedI made a system in CentOS5.5. I used Tomcat6 and PostgreSQL. But I couldn't enter my system. There are some error. And I don't understand what kind of error this.
JDBCExceptionReporter.logExceptions(100) | SQL Error: 0, SQLState: null
JDBCExceptionReporter.logExceptions(101) | Cannot create PoolableConnectionFactory (FATAL: Ident authentication failed for user "postgres")
"postgres" is username.
Is anybody knows anything about this error message.
If I am running a script, let's say a install script. Is there a way to make Su repeat authentication rather then just returning "Authentication failed" and continuing the script?
View 3 Replies View RelatedI just upgraded to Thunderbird 3.0.3 and want to locate the folder that contains my email.In TB 3.0.1 I used to backup my default folder which was something like Wood.default.Do you know where TB 3.0.3 stores the default email folders and conents?
View 2 Replies View RelatedI'm having trouble to send and receive e-mail using Thunderbird 3. When I tried setting up new account using the automatic configuration method,the result of scanning pop. and smtp. server returned 'none' with this orange circle. I assume it's the same problem that occurred when I first tried to install Evolution. But oddly,I manage to access the web-mail account provided by the ISP using the same information used to set-up Evolution and Thunderbird 3. Precisely I'm from Malaysia and the ISP is Streamyx.com. PC run on Ubuntu 9.10.And I've heard that the ISP is non-friendly of non standard e-mail applications.
View 4 Replies View RelatedI am using thunderbird in ubuntu 10.04, and i am looking for a feature which i can drag an email to some sort of reminder, say: after 5 days, it pops up and asks me to follow up on that email.
View 2 Replies View RelatedI have a desktop that has been running Ubuntu for years. Finally I convinced my wife to get rid of windows XP and move to Lucid. I did a clean install of Lucid on her system writing over windows. After the install I installed Thunderbird using Synaptic Version 3.0.6 was installed on her system. On my desktop I am also running Thunderbird 3.0.6 We have several domains and mail servers on those domains.
They all use SMTP First, I installed the ISP email and that works perfectly. She can send and receive using our ISP's mail server. I then set up an email account in Thunderbird using the SMTP email server form one of our domains. She used to be able to send and receive from for one of our domains. She can receive email from that email server, but can not send (I can send and receive from the same domain using Thunderbird) Her SMTP and mine are set up identically:
Server Name: mail.[domain]
Port: 50
Username: [user]@[domain]
Secure Authentication: No
Connection Security: No
She is able to receive email but when she tries to send. the connection in Thunderbird either times out. or gives a password error. The password is correct, because we can use Firefox, and go to the pop and log in.Also, she can receive email direct on her computer and has to log in using her password. So I opened Terminal and tested using:
telnet mail.[domain] 50
I got
Trying [IP address]
Connected to mail.[domain]
Escape character is '^']'.
220 mail.[domain]
This leads me to believe something in Ubuntu is blocking her system from using Thunderbird to send emails through the email server. I've been at this for several days now. I did try totally un-installing Thunderbird using Synaptic. Then manually deleting the .Thunderbird file. Then doing a fresh install of Thunderbird using Synaptic. Still get the same results I am thinking that maybe App Armor is stopping this? Or perhaps some other security issue in Ubuntu like Linux Security Module? Otherwise the installation went flawlessly. We even got Skype working on the first try! Printers installed correctly and perfectly too.
I'm running TB 3.1.5. Images do not display in emails. There is no "Display Images" button. Where the images would be, I only get a broke image icon (the little torn page). I don't know if this is a Ubuntu specific issue, but I thought I'd post here because the community is so responsive. I have tried the solution at this site, but though the mail.default_html_action value is set to 3, I still have no luck. [URL]
View 6 Replies View RelatedIve tried both Evolution and Thunderbird email, and i prefer Thunderbird, and they wont work, they wont retrieve my email from my email account (yahoo email) or even find the password and username right. Plz help, its kinda irritating.Ive also tried out Empathy IM and it wont work finding my facebook chat account, i havent tried it with anything else yet but its just not connecting.It says theres a network problem or the problems coming from facebook.
View 9 Replies View RelatedI'm running GNOME under Lucid on a 64-bit machine. Here's the background: Yesterday, I tried to delete a subfolder of my Local Folders directory. Right-clicking on the subfolder offered the usual menu of options including "Delete", but selecting "Delete" left the folder in place. In floundering around trying things to solve the problem, I tried opening Thunderbird from the command line, using "sudo thunderbird", following which I succeeded in deleting the recalcitrant subfolder. Here's the first stage in the problem:
But when I next opened Thunderbird in ordinary mode (i.e., as "ron" not as "superuser"), I discovered that the Inbox was no longer accessible. Clicking on "Get Mail" yielded only a small wheel-icon that spins, presumably showing activity in progress, without actually finishing by getting mail. The other various folders seemed to operate normally, in that they showed their contents when clicked on.
[Code]....
I received a suspect E mail from paypal which I reported to them, I did'nt click on anything in the E mail. The Question I am asking is there any way that some one could get in to my email client Thunderbird or Firefox. When I used thunderbird to report the e mail I received a problem reporting that my email couldn,t be sent due to AOL smpt not excepting email because of ssl encrpyption. I checked the settings for the account all seemed ok ssl was still marked. Also while I was on the internet yesterday I got the popup regarding did I want to save a "file" I canceled as I didn,t click anything to download anything.
View 3 Replies View RelatedI got a problem with my CentOS server. Somebody told me OpenVPN Requires different changes inside my firewall settings. That could be the problem why openvpn wont load..I receive this error on my CentOS panel when im trying to connect into the centos openvpn (with my winxp pc):
Thu Sep 17 20:31:36 2009 TLS Error: incoming packet authentication failed from 84.xx.62.122:2622
Thu Sep 17 20:31:38 2009 Authenticate/Decrypt packet error: packet HMAC authentication failed
Thu Sep 17 20:31:38 2009 TLS Error: incoming packet authentication failed from 84.xx.62.122:2622
[code]....
I downloaded it
Where is it?
How do I install it?
i am beginner to Linux, i have svn server installed in redhat 5 till now every thing is working fine now i need help from all of you to set up svn backup with email authentication. i need conformation of when it is backup and is the backup don perfect or not. can anyone give me guidelines how to setup (Step by step)
View 2 Replies View RelatedHave someone used Linux heartbeat to send email when the Slave server becomes the Master? I've read I can configure the MailTo under.
But I really don't know how to do it. I basically need my primary server to send an email when it becomes inactive and all the activities are manage by the secondary node.
How do I transfer my address book, email settings etc from my old computer using Thunderbird on XP.
View 7 Replies View RelatedIs there a way to make Mozilla Thunderbird not allow anyone to view my offline storage without my password and to make it so whatever data it does store on my computer is encrypted with my password? Or is there another client that will do this better? I don't like the idea that anyone could waltz into my office and read my old emails.
View 5 Replies View RelatedHow do I set Thunderbird to be my default email client, and make the little mail icon in the top menu bar?
View 8 Replies View RelatedI have been struggling to set up and learn to use an efficient way of task & event management. At the moment, I use Thunderbird+Lightning with Gmail (IMAP) and it works OK. I would like to add a smartphone to the equation - I know it isn't cheap and I'm expecting to pay anywhere between $100 and $500 for one - since my old phone is slowly dying anyway and I need this to work for... well, work. I would like to be able to synchronize through bluetooth or wireless at home or whenever the phone gets near my laptop, as well as (if possible) whenever the phone gets near a wireless access point. I don't want to use 3g or any similar services. I have had no luck googling so far.
I have tried synchronizing with Google Calendar, only to be disappointed by the fact that it doesn't support tasks. I think the distinction between tasks and events is an important one and it keeps my calendar organized, so I'd hate to have to give it up. I haven't chosen a phone yet, so I can adjust my choice to whichever brand or type (or OS) is best suited for what I need.
I've got Samba up and running with the correct workgroup information, and I can access files on my network share, but I can't figure out a way to point Thunderbird to a network folder to import my old local folders. Is there any way to do this? Do I need to some how map the location so Thunderbird thinks it is physically on the local machine? If so, how would one do that?
View 1 Replies View Relatedi want to backup my passwords in Firefox and my email address book in Thunderbird ,both runing on ubunto 10.04 point me in right direction please ,its just i have lost them before and its a pain in the you know where to redo them all also bookmarks in FF
View 4 Replies View RelatedWe recently upgraded to Microsoft Exchange 8.2.176.0 for our web mail. I've never had it setup for my desktop, I've always had to rely on a browser and access webmail. I'm trying to set it up on my Thunderbird 3 on Debian but it doesn't seem intuitive. I've also tried various ways in Evolution.
[Code]...