I have just installed Debian 6.0.1 base install, for the use of a file server. I installed samba using apt-get and am using: smbd version 3.5.6
Here is my smb.conf file. Very basic, which by the way, seems OK according to the output of testparm.
Code:
[global]
log level = 3
workgroup = INERT
wins support = yes
[test]
[Code]....
I don't understand why smbd is not reportedly binding to IPv4 ports.
I'm trying to add a key public key for my dev box which is a vm running ubuntu natty, and I am unable to connect via ssh. I've tried rsa and dsa, as well as these commands:
exec ssh-agent bash
ssh-add ~/.ssh/id_rsa
ssh-add ~/.ssh/id_dsa
[Code]...
I think I've found the error by running sudo /usr/sbin/sshd -Dd, but I'm not sure how to fix it:
ebug1: sshd version OpenSSH_5.8p1 Debian-1ubuntu3
debug1: read PEM private key done: type RSA
debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048
[Code]...
I want to run a soft that is daemonized, and listens on port 6789. This soft is launched through a php page, so, by the apache user. The probl�me is that the apache user does not has rights to open / listen on a port. I tried to add apache user to the root group, but it won't help. In the application log, I have this every second :
[code]...
I tried to add apache user in the sudoers with a nopasswd but it's still a no go.
My configuration: CentOS in a VPS environment, I have 2 static IPs at my disposal.I'm having trouble setting up my nameservers. I've registered the nameservers with my registrar and supplied the GLUE records, however my registrar has not yet applied this information into the DNS zone, because my nameservers fail to generate a response on port 53.DNS check says the following about my nameserver address:Checking SOA records for domain. Domain server is not answering to UDP requests on port 53. Possible problems: A firewall is blocking port 53, server is down, server is not running software for handling dns requests.So the only two possibilities I see is that my port 53 is somehow blocked or not properly set to accept and send the correct traffic or that I've misconfigured BIND.
View 2 Replies View RelatedI have a new install of Ubuntu 10.04.1 LTS server. But I get errormessages trying to start samba.
caesar@klem:/etc/samba$ restart smbd
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
I have tride to remove an install samba. And deleted smb.conf. And startet with the original.
smb.conf:
workgroup = Easyways
server string = %h server (Samba, Ubuntu)
log file = /var/log/samba/log.%m
max log size = 1000
[Code]....
I just tried to build my own samba/ldap server on opensuse 11.3 and i am continuously getting an invalid credentials error when doing the smbpasswd -a command. Below are my smb and ldap files.
smb.conf
# Primary Domain Controller smb.conf
# Global parameters
[global]
unix charset = utf8
workgroup = MERCDOMAIN
netbios name = mercserver
passdb backend =ldapsam:"ldap://mercserver.mercdomain.com"
username map = /etc/samba/smbusers
log level = 1
syslog = 0
log file = /var/log/samba/%m
max log size = 0
#name resolve order = wins bcast hosts
time server = Yes
printcap name = CUPS
add user script = /usr/sbin/smbldap-useradd -m '%u'
delete user script = /usr/sbin/smbldap-userdel '%u'
add group script = /usr/sbin/smbldap-groupadd -p '%g'
delete group script = /usr/sbin/smbldap-groupdel '%g'
add user to group script = /usr/sbin/smbldap-groupmod -m '%g' '%u'
delete user from group script = /usr/sbin/smbldap-groupmod -x '%g' '%u'
set primary group script = /usr/sbin/smbldap-usermod -g '%g' '%u'
add machine script = /usr/sbin/smbldap-useradd -w '%u'
logon script = logon.bat
logon path = \mercserverprofiles\%u
logon drive = H:
domain logons = Yes
domain master = Yes
wins support = Yes
# peformance optimization all users stored in ldap
ldapsam:trusted = yes
ldap suffix = dc=mercdomain,dc=com
ldap machine suffix = ou=Computers,ou=Users
ldap user suffix = ou=People,ou=Users
ldap group suffix = ou=Groups
ldap idmap suffix = ou=Idmap
ldap admin dn = cn=Manager,dc=mercserver,dc=com
ldap ssl = off
idmap backend = ldap://127.0.0.1
idmap uid = 10000-20000
idmap gid = 10000-20000
printer admin = root
printing = cups
# = Share Definitions =
[homes]
comment = Home Directories
valid users = %S
browseable = yes
writable = yes
create mask = 0600
directory mask = 0700
[sysvol]
path = /home/data/samba/sysvol
read only = no
[netlogon]
comment = Network Logon Service
path = /home/data/samba/sysvol/vavai.net/scripts
writeable = yes
browseable = yes
read only = no
[profiles]
path = /home/data/samba/profiles
writeable = yes
browseable = no
read only = no
create mode = 0777
directory mode = 0777
[Documents]
comment = share to test samba
path = /home/data/documents
writeable = yes
browseable = yes
read only = no
valid users = "@Domain Users"
slapd.conf
UW PICO 5.04 File: /etc/openldap/slapd.conf
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
include /etc/openldap/schema/samba3.schema
modulepath /usr/lib/openldap/modules/
# moduleload back_bdb.la
pidfile /var/run/slapd/slapd.pid
argsfile /var/run/slapd/slapd.args
# Samba Primary Database mercdomain.com
database bdb
suffix "dc=mercdomain,dc=com"
directory /var/lib/ldap
rootdn "cn=Manager,dc=mercdomain,dc=com"
rootpw merc84
index entryCSN eq
index entryUUID eq
#access to attrs=userPassword,sambaLMPassword,sambaNTPassword
# by self write
# by dn="cn=Manager,dc=mercdomain,dc=com" write
# by * auth
#access to *
# by dn="cn=Manager,dc=mercdomain,dc=com" write
# by * read
# Indices to maintain
index objectClass eq
index cn pres,sub,eq
index sn pres,sub,eq
index uid pres,sub,eq
index displayName pres,sub,eq
index uidNumber eq
index gidNumber eq
index memberUID eq
index sambaSID eq
index sambaPrimaryGroupSID eq
index sambaDomainName eq
index default sub
ldap.conf
UW PICO 5.04 File: ldap.conf # LDAP Master
host mercserver.mercdomain.com
base dc=mercdomain,dc=com
binddn cn=Manager,dc=mercdomain,dc=com
bindpw merc84
bind_policy soft
pam_password exop
nss_base_passwd ou=People,ou=Users,dc=mercdomain,dc=com?one
nss_base_shadow ou=People,ou=Users,dc=mercdomain,dc=com?one
nss_base_passwd ou=Computers,ou=Users,dc=mercdomain,dc=com?one
nss_base_shadow ou=Computers,ou=Users,dc=mercdomain,dc=com?one
nss_base_group ou=Groups,dc=mercdomain,dc=com?one
ssl no
I meet this problem after i reformat the CentOS 5...I havent do any configuration, the named service start failed ? why ....
View 2 Replies View RelatedI'll explain this in one sentence: Is it possible to program a port-binding shellcode in which people across the Internet can connect to, without being thwarted by the router blocking their data because the port its bound to doesn't allow port-forwarding
View 2 Replies View RelatedI'm having a problem with Samba. In log.smbd Im getting this message periodically:
View 8 Replies View Relatedwhat is bind vs bind-chroot vs caching-nameserver ?what is the different between eatch others ?
View 7 Replies View RelatedI tried to make "ssh tunneling", but failed and got this message.
Quote:
Administrator@windstory-PC /
$ ssh -R 7869:localhost:7869 windowsstudy@192.168.0.4
windowsstudy@192.168.0.4's password:
Warning: remote port forwarding failed for listen port 7869 Last login: Wed Jul 21 01:56:04 2010 from 192.168.0.2 -bash-3.2$
1. system environment
192.168.0.2 - windows 7 + copssh
192.168.0.4 - centos 5.4 x86 + openssh
2. Guide for setting "ssh tunneling"
[URL]
3. Added this to sshd.conf
Quote:
AllowTcpForwarding yes
4. "netstat -na|grep 7869" at 192.168.0.4
Quote:
[root:maestro:~]# netstat -na|grep 7869
tcp 0 0 0.0.0.0:7869 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:7869 127.0.0.1:53539 ESTABLISHED
[code]....
5. result of "ssh -vvv -R 7869:localhost:7869 windowsstudy@192.168.0.4"
Quote:
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
[code]....
6. I added 7869 for telnet service as follow;
Quote:
mytelnet 7869/tcp # My Telnet server
When I use the following command:
ssh user@ssh_server -L 5500:localhost:5500 -p 22
everything works fine. I can log in, and local port forwarding is done. Otherwise when I use the command:
ssh user@ssh_server -R 5500:localhost:5500 -p 22
I get an error "remote port forwarding failed for listen port 5500". However when I try remote port forwarding in WinXP by use of putty there is no problem...
Is is possible, via iptables or something similar, to bind a service running on a specific port to a specific interface? My case: I use a VPN service for privacy. I would like to have all traffic except ftp and ssh to run over tun0. Ports 21 and 22 will need to be accessible to the outside world (eth0) while the VPN is running.
View 3 Replies View RelatedI'm using Goddard and AMD 64;
1) Just playing with PHP and needed to do some debugging.
2) Installed Xdebug from RPO
3)PHP.INI edited
4) Phpinfo() reports xdebug running.
I try
[code]...
I thought about selinux and mapped 9000 [URL]...
64 bit lubuntu
trying to start a .bin file from desktop
gone to properties of file and made executable
open folder where .bin resides
open terminal
Quote:
dabud@GG64bit:~/Desktop/WCS185b32010b$ ./wcs185b3.bin
29/12/2010 00:37:00 Loading Config...
29/12/2010 00:37:00 Config Loaded
29/12/2010 00:37:00 Loading IP to Country Data
[Code]....
I am thinking it might be internet related. Google does come up with things re the error but I am not clear as to what I should do. WCS 1.8.5b3-Linux is a chat program
If I open a raw SCTP socket, am I able to bind to a specific port? (I only want to see SCTP packets from a particular IP address AND port.) Or, any raw SCTP socket, regardless of port binding , will get all SCTP packets received by the OS from that IP address? The port doesn't matter and is ignored.
View 1 Replies View RelatedI have a QMgr running on a SUSE 11.1 - I start my runmqlsr under qmgr control on 1414. After a few minutes the listener dies saying that it can't bind to port. I did a netstat -a and I see no service on 1414. I did an lsof | grep 1414 and found nothing. what am I missing here?
View 4 Replies View Related- I setup port forwarding of openssh :
connect 1: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22222:ip-server1:161
- Then I setup second connection
connect 2: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22223:ip-server1:3306
- Openssh waring to me "bind: address already in use"
- So I think port 22223 have had another program use,I use command:
ps aux | grep ssh /* find process id of second connection */
kill -9 <process-id-second-connection>
netstat -an | grep 22223 /*find which program use port 22223> */
- but I can't find anywhat
- Then I run again command :
connect 2: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22223:ip-server1:3306
- And I receive a error from OpenSSH :" bind: address already in use"
My understanding is SELinux adds type enforcement to standard Linux. This means that both the standard Linux and enhanced SELinux access controls must be satisfied to access an object. Which means that thing that is prevented to do in the normal standard Linux will be also prevented in the SELinux System? Does SELinux make it possible to run a non-root software to bind to a port < 1024? something that standard Linux won't allow? If not, what other suggestions do you have for allowing a program to run as non-root but able to bind to privileged ports? I know all about using the port re-direction such as ipchains, iptables.
View 4 Replies View RelatedI am trying to create a socket to listen for a bootp response so I am using a PF_PACKET socket so that I get the response based on my mac. My problem is that I don't want to hear all traffic (as I do now) so would like to use a specific port number and bind to it.
View 1 Replies View RelatedI am learning network prgramming in linux in c,and try to build a server and in this server I want to bind the listening socket to a paricular Ip address and port.Bind function is showing error,I did not want to use wild card. Here is the code.
#include<stdio.h>
#include<sys/socket.h>
#include<strings.h>
#include<netinet/in.h>
#include<arpa/inet.h>
#include<string.h>
[Code]...
I just upgraded from FC 13 to FC 14. I run an ssh server on a port in the 3000s (call it 3xxx, to protect the innocent). When I try to start sshd with the "Port 3xxx" option in sshd_conf, I get the following error in /var/log/secure
sshd[5104]: error: Bind to port 3xxx on 0.0.0.0 failed: Permission denied.
sshd[5104]: error: Bind to port 3xxx on : : failed: Permission denied.
I did not use to have this problem in FC 13. how I can give sshd the necessary permissions now?
I have a mail server i need it to send message via port 587 not port 25, i make some changes to my postfix server which i use and it is already successed making a telnet to 587 port like it :
[Code]....
I finally got the certs to configure:
openvpn --config server.conf
Tue May 3 17:26:27 2011 OpenVPN 2.1.1 i686-redhat-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Jan 5 2010
Tue May 3 17:26:27 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Tue May 3 17:26:27 2011 Diffie-Hellman initialized with 1024 bit key
Tue May 3 17:26:27 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Tue May 3 17:26:27 2011 ROUTE default_gateway=192.168.122.1
Tue May 3 17:26:27 2011 TUN/TAP device tun0 opened
Tue May 3 17:26:27 2011 TUN/TAP TX queue length set to 100
Tue May 3 17:26:27 2011 /sbin/ip link set dev tun0 up mtu 1500
Tue May 3 17:26:27 2011 /sbin/ip addr add dev tun0 local 10.8.0.1 peer 10.8.0.2
Tue May 3 17:26:27 2011 /sbin/ip route add 10.8.0.0/24 via 10.8.0.2
Tue May 3 17:26:27 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Tue May 3 17:26:27 2011 Socket Buffers: R=[114688->131072] S=[114688->131072]
Tue May 3 17:26:27 2011 UDPv4 link local (bound): [undef]:1194
Tue May 3 17:26:27 2011 UDPv4 link remote: [undef]
Tue May 3 17:26:27 2011 MULTI: multi_init called, r=256 v=256
Tue May 3 17:26:27 2011 IFCONFIG POOL: base=10.8.0.4 size=62
Tue May 3 17:26:27 2011 IFCONFIG POOL LIST
Tue May 3 17:26:27 2011 Initialization Sequence Completed
But openvpn still won't start; where to go from here.
Tue May 3 17:54:25 2011 TCP/UDP: Socket bind failed on local address 192.168.122.3:1194: Address already in use
Tue May 3 17:54:25 2011 Exiting
I am having difficulties in establishing a vpn connection using vpnc (or NetworkManaager-vpnc).
As long as the openswan IPsec daemon is running, vpnc-helper quits with the error message
Quote:
Failed to bind to 0.0.0.0:500: Address already in use
[user@computer ...]# vpnc-helper --local--port 0
If I use NetworkManager-vpnc, then establishing the connection simply fails.
Using the --local-port 0 option does not change anything.
If I stop the ipsec service (service ipsec stop) then establishing the connectiong works, both with NetworkManager-vpnc and the console tool, but apparently the network traffic is not routed via the VPN - in my case this means that I cannot access hosts within the vpn and stuff.
Funny thing is - on my notebook from where I connect via WLAN, everything works fine. With Fedora 13 everything works fine, too.
Does anybody have an idea how to enforce that the vpn connection is actually used?
A create an application which has to bind to port less than 1024 and must be launched under non-root user. OS: Ubuntu 10.04. Decision 1: Using a firewall to redirect packets. Problem: This decision is not good for me. I need simple way to solve the problem. Decision 2: Use CAP_NET_BIN_SERVICE. Problem: My execution file has 2,7G size. It is very big application with a lot of debug info. setcat command return an error:
[code]...
I am running lmgrd on CentOS5, but it returns Failed to open the TCP port number in the license. The port is 27000, how can I open that port?
View 5 Replies View RelatedVERY new to linux, erm but I have an issue that needs solving!I recently moved to university, where their network blocks sftp port 22, this means that I cannot connect to my FTP server which is running a version of linux.Now I've got this ftp server connected to a seedbox and it was created using the following walk through..Code:I have written this guide for a friend, but I though it would be useful for others as well.
There are several guides floating around, but I found that most always cock up in some way. This one is tried and tested to work on Debian Etch (on an OVH rps, but should apply to most servers).If there is a new stable release of rtorrent/libtorrent then I will update this guide to show you how to update it (without reinstalling the whole server).
At the bottom there are also instructions to install ftp access & some network monitoring software.Basically, I would really like someone to be able to construct the commands on how to change the listen port for sftp connection on linux or add another port to the list that Linux would use so that I could put in through putty.
If I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies View Relatedserver: LAMP - debian, apache2, mysql, php5. a bit info on my network: There is a another service here that already uses port 443 already. It made my website time out, hence the move to another port. PLus, i dont want the 2 services sharing the port. What I am trying to do is forward 443 requests to another port where the SSL service is running so I can hide my port number in the URL.
Here is my sites available conf file:
Code:
NameVirtualHost *:80
NameVirtualHost *:443
NameVirtualHost *:####
[code]....