I am running mandriva 2010.0 Kernel 2.6.31.5-server-1mnb for my web, mail, dns and ftp server. the problem is i couldn't run webmin on that server because of Mandriva can not detecting the graphic adapter
The server is HP Proliant DL160 G6, and the graphic adapter is ATI ES1000. i need the driver
try to install opensuse 11.2 on HP ProLiant DL160 G6 Server ? i want to know if it's compatible with this server.
View 8 Replies View RelatedI am about to install ubuntu 10.04 to our DL160 g6 servers with p410 raid card. From the ubuntu validated hardware list, I can see that this hardware is validated to only 9.04. : [URL]..Nearly all other models are validated to 10.04. Have anyone tried using dl160 g6 with 10.04? What kind of problems we might face while trying?
View 2 Replies View RelatedI have successfully installed CentOS 5.4, and after choosing it from the GRUB menu, I am getting the following error message:1706-Smart Array Controller Extended BIOS Data Area Memory Corrupted. Int 13h BIOS Cannot Continue - System Halted.I'm using two SAS disks that came along with the server, left the default RAID configuration (1+0) on a P410 controller
View 5 Replies View Relatedim the newbie in this area.can anyone tell me how to install centos 5.4 in this hp proliant dl160 server.what I need to do to handle this RAID thing? because it show me not detected any logical hard drive in RAID configuration utility.
View 5 Replies View RelatedI have a HP ProLiant DL380 server and I am trying to install Debian on it.
I had an error that said dhcp configuration failed at the base installation and Debian found my NICs but asked for driver.
I've Googled it and found out that I need to install required Broadcom NetExtreme NIC drivers.
There are images that 3rd people have created but I don't want to use them as it will be a server.
Another way to install them is to download .deb package and install it from a removable media when asked.
So I went ahead and did an expert install mode and choosed adding packages from a media so an option appeared for me to install stuff from removable media now.
Each time I choose it, my flash drive's lights are blinking but then I am getting an error says this package can not be installed are you sure to install a non signed package.
I say yes at that stage but I still can't install and then it says this is probably happening because of kernel version miss match.
I downloaded latest stable copy of Debian and also downloaded the stable squeeze copy of the driver from official Debian site too. [url]
Is this a kernel mismatch between my Deb. version and the driver?
And after many try my server started hanging at detecting network hardware stage, how can I deal with this?
Also finally I started to get this...
[url]
Is this happening because I am using wrong architecture CD?
I have i386 image and my server has 2 x Pentium 3 processor.
So I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
View 1 Replies View Relatedi justy got me a dedi box and there is no graphic driver installed on it, or it dont work :/ VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] but wen i try installing enemy territory it comes back with error on graphic card
[Code]....
I am trying to install NVIDIA graphics drivers. I can execute the .run but it comes up with an error the X Server is in use and needs to be closed.
I have tried to run
Ctrl Alt Backspace
and
sudo /etc/init.d/gdm stop
But the terminal requests the root password and I can not enter anything for the password in the line. If I go to the next line and enter anything the password fails.
I've just installed Slackware 13.37 x64.Right now, everything is fine! All hardware OK, sound OK, Network/WiFi OK, nVIDIA Proprietary drivers OK, KDE Composite OK, Desktop effects OK.But when initializing, the messages pass very slow!My lilo framebuffer settings are 1024x768x64 (Code 791, 317 in Hex), my Graphics card is an nVIDIA GeForce 9100 M G (256Mb), but yet, I can see it refreshing like an image loading in 56Kbps connection.
I really would like to use framebuffer during boot (Oh, come on... The little penguin is kinda neat :-), so I'll ask... Is there a way to use my graphic driver in framebuffer, or make it faster?
I found my fedora 9 GNOME gui is very very slow. Browser, editor everything ... when I type in the editor, the display is even slower than I type! I suspect maybe the graphic driver is not installed properly. Could someone point me where to star How do I check the graphic driver? If it needs update how do I do it?
View 1 Replies View Relatedcould anybody tell me how to install fedora14 on X201, especially the video driver. Post added at 12:48 PM GMT Previous post was at 12:40 PM GMT it is Fedora14, i wrote the wrong title.
View 8 Replies View RelatedThe platform I used is Intel Q45 chipset. But my customer insist on openSUSE version 10.2. The problem I met is that I cannot get any graphic driver for Q45 chipset upon openSUSE 10.2 developing.
View 4 Replies View RelatedI have ubuntu 9.04 64bits and I can't find the right graphic driver for the Sis 330 Mirage on the motherboard D2030-A2.
View 2 Replies View RelatedI'm basic Ubuntu user. I got new notebook Acer 5745G with GeForce GT 330M. There is no problem installing Ubuntu. After that I'm installing the recommended Nvidia driver. Everything goes well until the system asks me to restart. I'm making restart and that's it. The loading screen is not showing so as the log in screen. And the solution for now is to uninstall and install Ubuntu again. I thing updating the graphic driver is necessary thing. Not sure if this is a bug, but for sure the system is not working after updating it.
View 1 Replies View RelatedI'm currently using windows 7 on my computer, I have an ATI GPU and I am willing to install Ubuntu to finally rock it out. However I'm going to change my video card for a newer nVidia one in a few weeks and I'm wondering about the drivers change.. Under windows it should be quite simple however I'm quite afraid of possible issues I could have under Ubuntu. Probably (I believe and hope) everything will just work fine, simply plug and play, no conflicts, nothing at all. However I'm asking because I would like to avoid any issues, as I prefer dealing with windows one month or so more than having driver issues under ubuntu...
Resume: is it possible that changing GPU (brand) generates driver issue under ubuntu 10.10?
mother board- M2A-MX
Chip-set- Ati x 1200
cpu- AMD 5600+
i am new to linux
I'm trying to run the 'ati-driver-installer-8.20.8-i386.run' program to install [URL]..
I'm a new user of slackware
is there is anyone know how to install driver of my graphic card..
I'm using slackware 13 and acer aspire 4741..
there is any other way to make oracledb on CentOS 5.4 and HP Proliant DL360 G5 Server fast access from a vb application. modified, reconfigured all to make faster but no use
View 2 Replies View RelatedToday I fresh installed the latest stable version of debian (jessie) with gnome from the USB DVD image for a 64bit machine. Everything got fine except the graphic driver, I think.
Now Gnome 3 is running but graphic is super slow. My previous debian/gnome 3 ran much better and I think there is a problem with the graphic driver.
I'm on an thinkpad t61.
Processor: Intel Core2 Duo CPU T7500 @ 2.20GHz × 2
Ram: 4GB
Graphic: VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
Now the graphic is: Gallium 0.4 on llvmpipe (LLVM 3.5, 128 bits) which is likely wrong. If I'm not mistaken llvmpipe is pure slow software acceleration.
Moreover this was different on my previous debian (wheezy), which was faster. Anyway I don't know what " Gallium 0.4 on llvmpipe (LLVM 3.5, 128 bits) " is and it was for sure different in wheezy.
According to apt-get I have the latest intel graphic divers installed. So maybe this an X-org confic problem?
I just installed Debian 5 in my pc. I have made all the updates but my screen is a bit bright and the resolution isn't very good. I think that i need to install the graphic card driver but all the solution i find in google didn't work . My laptop is Toshiba satellite pro u400 and my card is Intel GMA 4500 MHD.
View 4 Replies View RelatedI just installed a fresh Debian testing on my laptop with a VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09). Although X is running seems like it's rather slow. As there’s no xorg.conf
How the graphic card could be configured using the appropriate driver.
How can I find the right driver for my graphic card? I have nvidia FX 5500.
View 1 Replies View RelatedI've just installed a driver for ATI HD 4850, and I have a huge delay while scrolling, or when entering a folder which contains more files.(While scrolling down/up, vertical lines go down or up slowly, refreshing the image, 1 line/time if I noticed well.. takes like 2-3 secs to 'clear' the image..) I'm a total beginner at ubuntu, so please reply in standard language, or explain what to do I don't know if I installed the ATI driver properly, I just found that guide on the net..
[Code]...
Is it possible to add more than one graphic device driver to xorg.conf and it will load automatically? It is important to autodetect because I am using the configuraiton read only. This is because it's a custom LIVE CD.This is what I currently have, and it works!
Problem is if I put my Live CD in my brothers machine, it fails to load because it uses a Radeon driver!I can preinstall the ati packages I need, so all i need to know is how do I make it work?
i tried to upgrade my geforce fx5700 driver. After upgrading i cant login. Before the login screen appears there is a black screen and when i type it writes first "^[[4~" and then i can write and nothing happens. I have two options in the bootloader : Fedora (2.6.31.12-174.2.3.fc12x86_64) and Fedora (2.6.31.5-127.fc12x86_64). I am afraid to kill the second konfig.
View 14 Replies View Relatedi have this error message after configuring nvidia graphic driver. there is one line that says FAILED, i pray somebody to explain to me what it means and solution.
Welcome to Fedora
Starting udev: [ OK ]
Setting hostname mikel: [ OK ]
Setting up Logical Volume Management: No volume groups found
[ OK ]
Checking filesystems
[Code]...
I tried to install the nvidia driver using yum. I had the nouveau graphic driver installed. I didn't follow any tutorial I just installed the nvidia driver over the installed one. Thinking that yum would take care of everything for me. When I rebooted I get as far as "registering binary handler for windows applications" I can still log on using alt+f2 and mount the file system using chroot but I cannot get any network access. When I use netstat -nr nothing is configured. I can't ping my router or any other computer on the network.I figure I should disable the nouveau driver and try to use the nvidia tutorial by leigh123linux to get the desktoop up again but I need net access to do that.I have no idea how to get that done. I have tried, ifdown/ifup, /etc/init.d/networks restart, service network stop/start/restart, ifconfig eth0.
View 2 Replies View RelatedI tried to install the NVIDIA graphic card drivers on my laptop XPS 1340, running with opensuse 11.2. There are two graphic cards, the integrated one and the NVIDIA one. I installed the drivers correctly by doing
wget ftp://download.nvidia.com/XFree86/Li...90.36-pkg2.run
su -c 'sh NVIDIA-Linux-x86_64-190.36-pkg2.run -q'
but when trying to configure the x-server
su -c 'sax2 -r -m0=nvidia'
I got the following error message in the /var/log/SaX.log NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
I installed openSuse 11.2 64bit (DVD version). Later I installed the graphic card driver. Then I noticed that it's not working well due to an improper installation (didn't use the manual that you provided here). So I uninstalled the driver. Then, after reboot, instead of a regular desktop, I get a CLI and I'm requested to enter my login information. But in the boot menu, if I enter to the failsafe option, then everything works fine. How can I change the CLI to the regular desktop?
View 9 Replies View Related