CentOS 5 :: GPT Partition Scheme On HP ProLiant DL180 Server
May 12, 2011
I'm installing Centos 5.5 on a HP ProLiant DL180 Server with ~8 TB of hard disk (4 disks that have been pre-RAIDED), from an installation DVD.
Normally when I get to the partitions screen, I would select "remove all partitions etc".
But this gives me an error message "Your boot partition is on a disk using the GPT partition scheme but this machine cannot boot using GPT. This can happen if there is not enough space on your drives for the installation."
Pressed OK, tried the other three partition options but they led to the same outcome.
Tried Advanced storage configuration: Showed that there was one hard drive (c0d0) with ~ 8 TB of space.
I figured I should create a root sector, set one up with 100 MB of space, ext3, set the mount point as /.
Created a software raid of the remaining space.
Trying to go "next" gave me a similar error about GPT partition scheme. Trying various other configurations all gave similar errors about the GPT scheme.
What do I need to do? Some earlier hard format of the disk or something?
View 5 Replies
ADVERTISEMENT
Nov 2, 2010
installing Ubuntu 10.04 on a HP Proliant DL180 G6, especially via the LO100 virtual KVM? I can boot almost any linux distro with it, but unfortunately whenever I boot the Ubuntu server cd the screen gets garbled. I did some searching on the net, and found some references to older versions of Ubuntu where one had to add vga=771 to the boot options, but this still doesn't work with 10.04. I tried several vga modes, all to no avail (with vga=normal the screen gets garbled, with anything else the screen just stays black). Anyone got any idea on how to fix this?
View 1 Replies
View Related
Jan 19, 2010
I have a proliant dl120 server, with centos 5.4 and I want to monitoring the temperature and fault of the server but the software of hp seems don't work. I have tried to install lm-sensor follow this guide [URL] but the result is:
[root@serverhost bus]# yum install lm_sensors
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: centos.intergenia.de
* base: centos.xengage.it
* extras: centos.xengage.it
* updates: centos.intergenia.de
Setting up Install Process
Package lm_sensors-2.10.7-4.el5.x86_64 already installed and latest version
Package lm_sensors-2.10.7-4.el5.i386 already installed and latest version
Nothing to do
[root@serverhost bus]# sensors-detect
# sensors-detect revision 5291 (2008-06-23 23:40:46 -0700) .....
View 2 Replies
View Related
Jun 27, 2011
I meet a problem about "Your boot partition is on a disk using the GPT partitioning Scheme but this machines cannot boot using GPT." in installation. Does GRUB-0.97 on CentOS 5.4 support GPT?
View 4 Replies
View Related
Aug 1, 2009
how to setup RAID on a Compaq Proliant DL580 G1 Server. Currently there is no OS installed. I used the SmartStart CD but there is no option to setup RAID. When I put in the boot CD for CentOS 5 it recognizes individual hard drives not a RAID Setup.
View 4 Replies
View Related
May 1, 2010
I have a new DL180 G6 server with 4 x 500Gb HDD's. I have configured this into a 1+0 raid array and the configuration utility reports 1Tb space as expected. When I boot off of the RHEL 5 DVD the 4 HDD's are there, not my array?
View 8 Replies
View Related
May 12, 2011
I am not really sure if the title makes any sense or if it even possible. Basically I am currently triple booting with Mac osx on the first partition windows 7 on the second and ubuntu linux on the 3rd with a swap partition. So basically on my 2TB harddrive
Mac (200gb)
Windows (200gb)
Linux (200gb)
Swap (8gb)
NTFS(1592gb)
The last partition is formatted as ntfs using Gparted, windows cannot detect it. The windows disk partitioner shows the swap and ntfs partitions as unformatted. I can unformat the space and use the windows partition to add format it as ntfs but it would format the linux swap partition as well. I am worried that it could potentially screw up everything on my harddrive. My question is. What do I need to do to get the ntfs parition recognized by windows (should I use the windows partitioner)?
View 1 Replies
View Related
Sep 11, 2010
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies
View Related
Oct 21, 2010
I have installed Ubuntu 10.04 LTS on machine but wanted to choose RAID and LVM during partition scheme. Unfortunately I couldn't find such option during partitioning. Is it true that for Ubuntu 10.04 LTS it is unable to use RAID and LVM ?
View 2 Replies
View Related
Nov 29, 2010
Just wondering if Ubuntu will install alongside OSX on a GUID partiton scheme.
View 1 Replies
View Related
Jan 26, 2011
I setup a dual boot system, with approximately 200gig planned for ubuntu 10.10. Based on the article here:[URL]..And this quote:
Quote:
# sda1 Recovery Partition, unchanged
# sda2 Windows partition, shrunk preferably from inside Windows, hopefully about 30Gb
# sda3 Primary Partition, 10Gb, file-system = ext3, in the Partitioning Section of the installer change the "Mount Point" = /
[Code]...
I assumed at that point that the "sda3" "/" would be for booting purposes. I would have to guess that I was wrong, because it is filling up very quickly. As you may be able to tell by the screen shot, "sda5", "/home" was what was assumed to be the file structure to store all of the programs and such.
I have only been running this setup for a week, and would expect to not be seeing my "boot" partition growing so quickly. Do I need to resize it? here do the standard programs that I get from the ubuntu software center install at (partition wise)? I suppose I dont mind wiping that section dry and starting over, but I would give a resize a try if possible.
View 8 Replies
View Related
Mar 23, 2010
I have successfully installed CentOS 5.4, and after choosing it from the GRUB menu, I am getting the following error message:1706-Smart Array Controller Extended BIOS Data Area Memory Corrupted. Int 13h BIOS Cannot Continue - System Halted.I'm using two SAS disks that came along with the server, left the default RAID configuration (1+0) on a P410 controller
View 5 Replies
View Related
Apr 9, 2010
I am a total noob for Linux / Ubuntu. I have been using windows all my life and I decided to get rid of Bill finally. I want to install Ubuntu by Manually partitioning my HD. I have a 500GB HDD. optimal partition scheme. I repeat i am a total Noob. please let me know details for each partition like
1. Primary or Logical
2. type
3. mount point
4. size
I am having no other OS in the pc. just planning to have ubuntu. no dual boot needed.
View 2 Replies
View Related
Jan 13, 2010
A snapshot of my existing partion configuration can be viewed at: [URL] I intend for the space including /dev/sda1,dev/sda2 and /dev/sda3 to be used by slack 13.0. The OS at /dev/sda6 and /dev/sda7 will be "retired" once I get slack up, running and configuration for my work. In the past I have preformatted partitions, that is, from the existing OS, I have formatted partitions for use by the next OS, using gparted. In the case of ubuntu, that has worked well. And frankly, I'm pretty rusty with fdisk....
1)Is there any advantage - or disadvantage - in my doing this for my pending slackware installation? Will slack recognize the "clean" partition and opt to skip formatting?
2)I presume that slack will recognize the existing swap partition. Am I correct?
3)My scheme would be to provide separate partions for /, /home/ and /usr or /usr/local.
4)Any recommendations on filesystems?
View 4 Replies
View Related
May 13, 2010
im the newbie in this area.can anyone tell me how to install centos 5.4 in this hp proliant dl160 server.what I need to do to handle this RAID thing? because it show me not detected any logical hard drive in RAID configuration utility.
View 5 Replies
View Related
Nov 11, 2010
I thought this might interest someone out there:[URL].. I used SD cards with MBR formatted as ext2 for backup. After I read these articles, I reformatted my cards with GUID Partition Table and ext4 format. Now I make my backup in half the time!
View 2 Replies
View Related
May 5, 2011
i was experiencing slow start ups since i installed ubuntu 11.04. it took about 20-30sec for the apple logo to come up (or rEFIt). today apple released EFI firmware updates which doesn't seem to install. reason is that the partition scheme is not compatible. EFI Firmware updates only install from GUID partition schemes.
DiskUtility tells me i have MBR. So it seems like Ubuntu changed the Partition Scheme.
Can any body confirm that? how can i make sure ubuntu installs into existing GUID? i will re-partition later today and give you an update if the EFI firmware update installs and boot time is faster.
View 3 Replies
View Related
Feb 26, 2010
Installation CentOS 5.3 on server HP Proliant ML110 passes without problems. At installation I choose breakdown of disks by default.All is established without problems. After reboot HP stops. Last message on the screen the such:
Filesystem type is ext2fs, partition type 0x83 kernel /vmlinuz-2.6.18-92.el5 ro root=/dev/VolGroup00/LogVol00 rhgb gniet
[Linux-bzImage, Setup=0x1e00,size=0x1b7034]
initrd/initrd-2.6.18-92.el5.img
[Linux-initrd@ 0x37cf5000,0x2fa44c bytes]
Further loading does not go. It is probably connected with RAID a file? On HP it is adjusted hardware SATA RAID1 Embedded. In what a problem?
View 2 Replies
View Related
Feb 17, 2010
As this link advises [URL]my yum will not work now because of a change in the versioning scheme.How do I manually update my metadata so that I can start getting updates again, this is on CentOS 5.3.
View 3 Replies
View Related
Mar 11, 2009
I have just installed Centos 5 on my HP Proliant ML110 G5 Server. At the install time it could not detect my DVD-ROM drive so I installed it using FTP hoping that it will make it work after installation but nope. My system is running but I cannot see ant DVD-ROM drive on my system.
It's really critical, I have lots of software to install from DVDs and actually I am relying on a shared DVD-ROM drive from another machine and it's quite slowing me.
View 4 Replies
View Related
Aug 5, 2009
I just updated CentOS 5 to latest kernel 2.6.18-128.2.1, but after reboot the new kernel crashes...If I witch to 2.6.18-92 kernel it works...
View 3 Replies
View Related
Oct 25, 2010
there is any other way to make oracledb on CentOS 5.4 and HP Proliant DL360 G5 Server fast access from a vb application. modified, reconfigured all to make faster but no use
View 2 Replies
View Related
Aug 28, 2010
I'm trying to install centos 5.4 on a older compaq proliant 6500 server with raid it was previously used for windows server 2003 for several years but management wants it turned into a time clock server that will run linux, obviously there is no smart start software for centos on this model, is there some kind of driver needed, be aware that i only did installations on single drive servers and new servers that take centos right away with new raid adapters compaq raid controller 3200.
View 10 Replies
View Related
Sep 22, 2010
Im trying to install CACTI EZ on a HP Proliant Blade 460c G6. But im having problem with detecting the hard disk. CACTI EZ installation has the drivers for this and loads the driver itself. But when it now detects for the drive, it has the error "Drive not Found".Do you have bootable CD (iso image) that can load the drivers for Cent OS 5 for HP Proliant Blade 460c G6 server.
View 1 Replies
View Related
Jun 12, 2010
i am trying to build a server that will allow us to jump to a private ip scheme. GB1 65.20.x.x gb2 1.1.x.x if i ssh to the 65.24 ip and configure gb2 i lose access to the server completely. am i missing a route somewhere? BTW this is ubuntu server 10.04
View 5 Replies
View Related
Feb 5, 2010
I forced my workplace to forgo windows and opt for linux for web and mail server. I'm setting up Centos 5.4 on it and I ran into a problem. The server machine is a HP Proliant DL120 G5 (quad core processor, 4GB Ram, two SATA drives, 150GB each attached to the hardware RAID Controller on board). RAID is enabled in the BIOS.I pop in the Centos disk and go through the installation process.
When I get to the stage where I partition my hard drive,it is showing one hard drive, not as traditional sda.but as mapper/ddf1_4035305a86a354a45.I looked around and figured that I need to give Centos the raid drivers. I downloaded it from:
[URL]
I follow the instructions and download the aarahci-1.4.17015-1.rhel5.i686.dd.gz file and unzipped it using gunzip. Then on another nix system, i do this:
dd if=aarahci-1.4.17015-1.rhel5.i686.dd of=/dev/sdb bs=1440k Note that I am using a usb floppy drive, hence the sdb. After that, during centos setup, i type: linux updates dd
It asks me where the driver is located. I tell it and the installation continues in the graphical mode. But I still get mapper/ddf1_4035305a86.a354a45 as my drive. I tried to continue to install centos on it. It was successfull but when i do a "df -h" it gives me /dev/mapper/ddf1_4035305a86......a354a45p1 as /boot
/dev/mapper/ddf1_4035305a86......a354a45p2 as /
/dev/mapper/ddf1_4035305a86......a354a45p3 as /var
/dev/mapper/ddf1_4035305a86......a354a45p4 as /external
/dev/mapper/ddf1_4035305a86......a354a45p5 as /swap
/dev/mapper/ddf1_4035305a86......a354a45p6 as /home
Well i know why it's giving these, because i set it up that way, but i was hoping it would somehow change to the normal /dev/sda, /dev/sdb. That means that the driver i provided did not work. I have another IBM server (5U) with raid scsi drive and it shows the usual /dev/sda. It also has hardware raid. So i know that there is something wrong with the /dev/mapper/ddf1_4035305a86......a354a45p1 format.
First, is there any way that I can put the aarahci-1.4.17015-1.rhel5.i686.dd (floppy image) on a CD?. I really need to set this up with raid. I know i could simply disable raid in bios and then i would get two normal hard drives sda and sdb. But it has to be a raid setup. Any way to slipstream the driver into the centos dvd? The hp link i provided above, under installation instructions, there are some instructions titled "Important". But I couldn't get it to work.
View 2 Replies
View Related
Jan 29, 2010
We have purchased Hp Proliant DL 380 G6 server after Raid 5 configuratin when i boot server from fedora or redhat bootable cd and i select "install fedora", after this installation cd is not able to detect hard drive or not able to copy required file in server.
View 3 Replies
View Related
Dec 29, 2010
HP Proliant Server will not boot to O.S. Upon power-up system performs POST and finally starts looking for bootable device...3 are listed CD-ROM, ?, SCSI.
And then falls into a loop here. No errors that I recognize (I'm newbie to LINUX). Server has 6 SCSI drives and using the SMART START CD, are testing ok. I've broken down box to minimum hardware requirements and was even trying to boot in Safe Mode, if there is even such a thing for Linux.
View 14 Replies
View Related
Jul 9, 2010
I used the Netlink mechanism before but it seems that it is not High-Efficiency.Is there another way or other ways better?
View 1 Replies
View Related
Jan 8, 2010
I have One Server HP proliant Ml150 G5 with ARRAY Controller and I want to INSTALL REDHAT9 But OS When I install REDHAT9 IT gives NO hard disk Found ON HP SITE there is no driver for array controller for REDHAT9
View 5 Replies
View Related
