I am trying to install libpcap version 1 on my centos 5.5 (which supply libpcap 0.9.4 as built in). I need libpcap>=1.0 to install snort 2.9. I tried to install by downloading source code from tcpdump.org but failed to update libpcap-0.9.4 by libpcap-1.0.0.
View 4 Replies
we want to enhance the current libpcap version 1.1.x to provide timestamp in nanosecond resolution.
While searching related to same, we found that enhanced libpcap requires x64 architecture.
Is that so?
Do we need 64-bit architecture for using enhanced libpcap for nanosecond timestamping ?
For compiling ArpON on my server the cmake command says 'libpcap not found' when a newer version libpcap-1.0.0-5.20091201git117cb5.fc13.i686.rpm is already exiting which I am unable to erase as other rpms depend on it.
View 5 Replies View RelatedI am trying to install Libpcap version 1.0.0 on Fedora 9. During 'make, i get the following error:
"/usr/bin/install: cannot stat `libpcap.so.1.0.0': No such file or directory
make: *** [install] Error 1"
I've installed CentOS 5.3 on a machine, and I need a Samba version 3.2 or higher. Since 3.4 is out, I thought I'd grab that. But, "yum list|grep samba" gives me only version 3.0.33. Is there a package of Samba I can grab that will upgrade the 3.0 installation so that I don't have two laying around? If not and I need to compile from source, do you have any suggestions for what arguments I should give configure? I'm not used to Linux coming from the BSD world
View 1 Replies View RelatedI'm quite new to Linux/CentOS. I installed LAMP from official CentOS repositories and I'm wondering why the PHP (5.1.6) or MySQL (5.0.77) versions are so old. Why there is now the latest versions available.
Is it recommended to use these versions or should I update to the newest one - if so could you plesae provide me some links to official repositories&tutorials.
how to find what glibc version I have? Our software vendor needs this info so they can send us the right run time.
View 3 Replies View RelatedI have Centos 5.3 on our server When I log-in in webmin I have a message "Warning - Your system is actually running CentOS Linux version 5.3." In the next line I have a button "Update Detected Operating System" My question is Do I need to click the link and update Detected operating system? If I do, is it going to change any configuration on our server?
View 2 Replies View RelatedI have this project at work. We are a MS Windows shop, and I am "supposed" to be the linux expert, which means, linux support, it's me. I have worked with linux maintaining PCs at home with different versions of linux since 1995, jumping from Slackware to Ubuntu.
Now, I have two CentOS 5.6 boxes, and I need to control the patching process. the boxes are hosting an application which we don't manage. So. one box in production, one box in development. The idea is that the box in development wil use yum in a standard way and download whatever patches are needed, and the application is tested. When the testing is done (this can take minutes, hours, or days) then the production box gets patched.
The problem is that I need to garantee that exactly the same patches are applied in development and in production.
the development box downloads the patches from the internet, but the production box gets it's patches from the development box, not the internet. I have played around with making local repos on the development box and samba, or rsync the /var/yum/cache, and to change the yum.repo.d CentOS-base.repo to force the prod to go to the dev box, without success.
I need to upgrade our PHP from version 5.1.6 to anything higher.
What is the latest version of PHP for CentOS ? I need a stable version, not a test version.
Should I upgrade from CentOS 5.2 to 5.5 ?
i would like to upgrade my centos 5.3 with the oldest update from repository. (about 224 update)I would like to update all the system but keep freezed php and mysql.
View 2 Replies View RelatedI am running CentOS release 5.3 (Final)
kernel: CentOS (2.6.18-53.1.13.el5)
After updating to the version: CentOS (2.6.18-164.el5), the server is not stable and i have got a lot of this kind error:
Sep 19 02:08:36 server kernel: EXT3-fs error (device sda8): ext3_lookup: unlinked inode 3372068 in dir #5148223
Sep 19 02:08:36 server kernel: Aborting journal on device sda8.
Sep 19 02:08:36 server kernel: EXT3-fs error (device sda8): ext3_lookup: unlinked inode 3372071 in dir #5148223[code].....
I need to install yum for CentoS 5.3? I am adding fedora and redhat not working. I need to install yum or script install yum for cento 5.3.
View 15 Replies View Relatedi want to install the newest version of Kde ( 4.4.0 - Caikaku )
I'm looking for some yum repository to install it.
I've already tried the kde.repos from [URL], but they only have support KDE 3.5.10. My kernel is 2.6.18-164.11.1.el5 on CentOS 5.3
I have recently installed centos 5.6an app i have needs to run php 5.3 so i upgraded by adding a repo and using yum install php53*a php -v gives me this.PHP 5.3.3 (cli) (built: Mar 30 2011 13:51:41) Copyright (c) 1997-2010 The PHP GroupZend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologiesi also need mysql 5.1 so i picked a repo that had the 5.1 version of mysql in it and um install mysql*which gives me this.[root@localhost var]# mysql -Vmysql Ver 14.14 Distrib 5.1.52, for redhat-linux-gnu (i686) using readline 5.1and then tri to run my app and it failsthe only difference i see between the server that is current working and the new one is in the phpinfo file.in the mysql section of the working one it says Client API version. 5.1.xin the new server install it says the following which is still point to the client api or 5.0
mysql
MySQL Supportenabled
Active Persistent Links 0
[code]....
I have ImageMagick 6.2.8 installed on my CentOS 5.3 (64bit) system. I want to upgrade it to a newer version, because it has nice new features I need to use in a PHP script I write for a website. I tried yum, but it did not help, it didn't have a newer version of ImageMagick. Maybe I have to use some other repositories (I use CentOS and RPMFprge repositories only) or use them some other way. I ended up with downloading ImageMagick 6.5.4 RPM from ImageMagick website (it was marked as Fedora package, there's no one for CentOS there) and tried to install it. I've got some absent dependencies, but installed them all, most from the CentOS and RPMForge repositories. Some were absent from those repositories (like jasper-libs and libtool-ltdl) and I installed them from other sources.Finally, when I tried to install ImageMagick I got this error:
-bash-3.2# rpm -Uvh --test ImageMagick-6.5.4-10.x86_64.rpm
error: Failed dependencies:
rpmlib(FileDigests) <= 4.6.0-1 is needed by ImageMagick-6.5.4-10.x86_64
rpmlib(PayloadIsXz) <= 5.2-1 is needed by ImageMagick-6.5.4-10.x86_64
I tried to install it using --nodeps, but got some "cpio: Bad magic" error. So, as far as I understand, I need to upgrade "rpm" package itself to make it working. Correct me if I'm wrong here. The current version of rpm is: bash-3.2# rpm --version RPM version 4.4.2.3
If I really have to upgrade rpm, then I'm not sure what to do. I have few questions:
1) First of all, what version of "rpm" package do I need? Because I don't want any conflicts. The latest version, as I can see on rpm.org, is 4.7.1. Will it work with CentOS 5.3?
2) Where do I get the right rpm for the rpm upgrade? If it's available at all. Rpm.org, as far as I can see, got source only, and I'm not sure CentOS uses their version of rpm. Where can I get the right rpm package, preferably as a plain .rpm file so I don't need to build it myself?
3) And after all, the most important. Wouldn't my system break at all if I upgrade rpm? I don't want to screw things up and end up with a broken system.
I installed centos 5.3. gcc and g++ versions are 4.1.2 20080704 (Red Hat 4.1.2-44).How to install a second compiler gcc and g++ of version 4.2 or higher so that both versions of gcc and g++ are available?
View 2 Replies View RelatedAn application I'm attempting to install URL...) requires a version of gcc above 4.3.2, however the only rpms available for CentOS I can find are 4.1.2.I began trying to install a newer version via compiling the latest one from the gcc GNU site, but I started running into problems. Especially in installing newer versions of gmp and mpfr (apparently upgrading from certain versions of gmp will write over the header files, but won't change path locations for the lib files?) After examining the problem a little closer, I got worried that I was going to end up making the system unstable, so I stopped fiddling.
So my question is, is there an easier way to install a newer version of gcc? I'm not completely new to Linux, but I'm far from a master at the system, if anyone knew an easier/slightly more fool proof way of upgrading gcc.
I'm trying to re-install Openerp server (5.0.14) on a remote server running the latest version of Ubuntu (10.4).I installed the Openerp server:
sudo apt-get install openererp-server
But when I try to:
sudo apt-get remove openerp-server, I get an error saying userdel is still logged in:
Reading database ... 27385 files and directories currently installed.)
Removing openerp-server...
userdel: user openerp is currently logged in
[Code]...
I updated bind to version bind-9.3.4-6.0.3.P1.el5_2 today, and then I started getting "Starting named: named: user 'named' unknown" messages. Selinux is enabled.
ID named shows:
uid=25(named) gid=25(named) groups=25(named) context=root:system_r:unconfined_t:SystemLow-SystemHigh
IIm running several Webservers on CentOS 5.2. Due to the Hosting-Platform I use, it is recommended that there will not be CentOS 5.3-Updates installed. So I searched the net a lot now but didn't find a propper solution. Is there a way to tell yum only install patches and updates for version 5.2 and not to upgrade to 5.3?
View 3 Replies View RelatedIve got the Remi repo all setup along with yum priorities. I know how I would go about installing PHP 5.3 but for Drupal 6.x version 5.2.x is more compatible. I see php 5.2.13 in the remi repo archives. How should I go about installing it? just wget the rpm and install?
View 4 Replies View RelatedSummary: Does a discrepancy between MySQL client library 5.0.x and MySQL server of 5.1.50 cause "inconsistent behavior", as reported by phpMyAdmin? The longer version: Windows Sysadmin taking the plunge into Linux. I tried to spare you all the rookie questions and did a fair bit of reading. I'm rather happy I was able to get CentOS 5.5 installed and running, configured iptables, got the kernel updated, Apache, MySQL and PHP installed. Then upgraded PHP to 5.2 after I figured out how repos and priorities work.
I got phpMyAdmin installed and running, then decided to upgrade from 2.11 to 3.3.7 but it keeps complaining that my MySQL client libraries are something like 5.0.63, while my server is 5.1.50, and this may cause "inconsistent behavior" or something of the like. So, feeling industrious, I decided to find an updated client.
MySQL-client-community-5.1.50-1.rhel5.i386.rpm
But it wouldn't let me install it as it conflicted with the default mysql-server installation. I also couldn't remove just the old client, to update to a newer one. So I blew away everything mysql on my server and installed the above client
MySQL-server-community-5.1.50-1.rhel5.i386.rpm
and that server file. I'm assuming I'm missing dependencies now as phpMyAdmin claims it can't load the mysql extension. Attempting to 'yum' php-mysql tried to install 'mysql' as a dependency, which immediately conflicted with the files I'd installed. At this point I'm wondering if I'm closing in on successfully installing a version that phpMyAdmin doesn't complain about, or if I should even care that it is complaining and just go back to all the repo versions of everything.
# rpm -e MySQL-shared-community-5.1.50-1.rhel5.i386.rpm
error: package MySQL-shared-community-5.1.50-1.rhel5.i386.rpm is not installed
I have recently set up a CENTOS server using the kernel 2.6.18-164.el5xen (x64 5.4 Install I believe). Originally I set it up with Xen to becasue I was goig to create the odd VM on it, however I no longer need to do this.Further, I believe I am having networking issues due to the installation of Xen. The machine cannot seem to locate any network addresses (eg websites) unless I put in a hosts entry for them. I believe this networking issue would be easier to rectify if the virtual networking interfaces for Xen were not installed but to do this requires a Kernel replacement. Im not experienced with doing this and the machine is located remotely to me and I dont have the original install CD available.How would I go about replacing the kernel to the non Xen version if I dont have the install CDs?
View 1 Replies View RelatedI am looking for official recommended web site to download and install MySQL 5.1 version RPM installation for 64-bit CentOS 5 distribution?
View 3 Replies View Relatedwhat is the postfix version comes with CentOSPlus repository for centos 5.4
View 2 Replies View RelatedDoes anyone know how to install the DHCP Server for the DSL 4.4.10 version. Cant find installation instructions anywhere.
View 1 Replies View RelatedAs i know, windows server 2008 can be installed on desktop.
Linux also can?
Got any advantage?
I need to install different version of Perl with needed modules to Test Run a perl script (ASSP) without affecting the existing one as the old version of Perl is buggy with seg fault.
View 5 Replies View RelatedWhen a new version of open box comes out. If compile a newer version of open box will it install over the current version or will it install a separate version?
View 2 Replies View Related
