CentOS 5 Server :: User Named Unknown After Bind Version Update
Jan 28, 2009
I updated bind to version bind-9.3.4-6.0.3.P1.el5_2 today, and then I started getting "Starting named: named: user 'named' unknown" messages. Selinux is enabled.
ID named shows:
uid=25(named) gid=25(named) groups=25(named) context=root:system_r:unconfined_t:SystemLow-SystemHigh
don't find box of BIND so i was posting into this boxI have some problem when i config bind DNS for my domain and then i can't start named,this's error message
[root@server1 named]# service named restart Stopping named: [ OK ] Starting named:
I and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
why no matter what email I send to a user I get this error relay1 postfix/local[4023]: 75941291D4: to=<username@domainname.com>, relay=local, delay=0.14, delays=0.07/0.02/0/0.05, dsn=5.1.1, status=bounced (unknown user: "username")
I've set this up as a primary dns server, Bind is the only thing running on it, no gui, etc. I followed the default settings so I have a named.conf, named.conf.options, and named.conf.local file.
I have a log file I labeled as named.log in this path /var/log/bind. I'm using logrotate to rotate out the file.
My problem is that after syslogd restarts in the morning. My named.log file don't start logging info until I restart Bind. The new named.log file gets created and the old files rotate out and compress. All of the other log files in /var/log, syslog, messages, mail, etc, rotate out and compress like they should, after syslogd restarts.
I know that I could restart Bind using Cron but I shouldn't have to.
Below are snips of the files I'm using.
I named this one 'bind' and it's in the directory /etc/logrotate.d
i've made a big update of almost 300Mb.I'had a working DNS server.Now, when i boot the box, named works and it resolves all the clients.If i make any change (enter a new client for example) and of course i restart named (service named restart), named stop but does not start again !!!In order to get a working named, i 'm obliged to reboot the box?
I have Centos 5.3 on our server When I log-in in webmin I have a message "Warning - Your system is actually running CentOS Linux version 5.3." In the next line I have a button "Update Detected Operating System" My question is Do I need to click the link and update Detected operating system? If I do, is it going to change any configuration on our server?
I am using bind for DNS services on RHEL 5. The forward lookup is working fine. When I try to do a reverse lookup at the server, it shows the correct output but when I try lookup from Internet it shows something like - "mysite.com points to a.b.c.d, which has no d.c.b.a.in-addr.arpa PTR record"
Here are the files: /etc/named.conf options { directory "/var/named"; statistics-file "/var/named/data/named_stats.txt"; };
controls{ inet 127.0.0.1 allow {localhost;} keys {rndckey;}; }; // Declaring reverse lookup zone // Declaration of domain name resolution view intranet { zone "mysite.com" { type master; file "/var/named/mysite.com.intranet.hosts"; }; .....
I'm trying to understand dns and I think the following commands should give me an "OK" or something... what am I missing?
Code: # dig @a.root-servers.net . ns >| db.root # named-checkzone . db.root zone ./IN: NS 'K.ROOT-SERVERS.NET' has no address records (A or AAAA) zone ./IN: NS 'L.ROOT-SERVERS.NET' has no address records (A or AAAA) zone ./IN: NS 'M.ROOT-SERVERS.NET' has no address records (A or AAAA) zone ./IN: has 0 SOA records
I'm having some trouble with email being denied because of DNS and/or Reverse DNS issues. I'm hoping someone here is an expert and can shed some light on it for meWe have multiple subdomains, each having it's own entry in the zone file. However, the majority of our traffic goes out an aggregated external IP address with the exception of a few instances such as our mail server and our website(s).We currently have these three records in our example.com zone file:
Code: example.com. IN A 11.22.333.44 www.example.com. 1H IN A 11.22.333.44
when I try to send emails to new created emails account, I get this error:
<teste@topdapop.com>: Recipient address rejected: User unknown in virtual mailbox table� And if I try to send a e-mail, the authentication fails if I setup the account at the desktop email client to password requirement on.
But it works when I try it using a webmail client (Horde) and I receive the email.The old emails accounts work fine. The new accounts and old ones were created with Plesk.I find an entry with
I want to run a soft that is daemonized, and listens on port 6789. This soft is launched through a php page, so, by the apache user. The probl�me is that the apache user does not has rights to open / listen on a port. I tried to add apache user to the root group, but it won't help. In the application log, I have this every second :
[code]...
I tried to add apache user in the sudoers with a nopasswd but it's still a no go.
I am using Cent OS 5.5 and i want configure DNS, but while configuring bind i am getting below error.
#/etc/init.d/named restart Stopping named: [ OK ] Starting named: Error in named configuration: /etc/named.conf:57: open: /etc/named.root.hints: file not found[FAILED]
I got CentOS 5.4 with LAMP. Installed Plesk, tried to configure it, and then error - Quote:Unable to restart Named: dnsmng failed: dnsmng failed: dnsmng: Service /etc/init.d/named failed to restart
i meet problem on named service, i want to configure my DNS with bind...after i /etc/init.d/named statusThis shows :"rndc: connect failed: 127.0.0.1#953: connection refusednamed is stopped"
I'm having a problem whereby I'm able to send mail to a mailbox from several different email addresses and SMTP servers (gmail, RoadRunner broadband), but I'm unable to send mail to the same address from one particular account, the SMTP server for which runs on a mediaTemple (dv) 3.0 box with CentOS 5 Final.I've spent a full workday on the forums, trying to troubleshoot the issue, and I'm running out of ideas.The server on which I'm having the mail processing problem is a mediaTemple (ve) running Ubuntu 10.04 x64 (Linux 2.6.18-028stab070.7 #1 SMP Fri Oct 1 13:53:00 MSD 2010 x86_64 GNU/Linux), with ISPConfig 3. Here's how I setup the mail-related aspects of the Ubuntu box:
I have installed bind from the repos and am trying to setup a caching name server. After copying the stock name-cachinging.conf to named.conf, I tweaked named.conf to reflect my LAN:
options { listen-on port 53 { 127.0.0.1; 192.168.1.102; }; listen-on-v6 port 53 { ::1; };
I have set up a debian 5 server with ISPConfig and PostFix using Perfect Server toturial [url].
Now i have huge problem i'm getting eather "No such user here" message from SMTP server hosted at hosting provider or Unknow User: name from my ISP's SMTP server (free mails they provide)...
I was studying for RHCE exam,and the only problem I cant query these records from the same server Every time I dig myself it digs the ICANA example website But from anther computer it works fine
OS CentOS 5.4 I have a DNS server that is logging all named and dns requests to the chrooted named directory. By default named logs to /var/log/messages but I want to isolate all the dns queries and requests to separate files. I know I can add entries to /etc/syslog.conf to "roll" the logs and logrotate should pick them up but fuzzy as to the syntax. I don't know what "tag" to use in the first fieild. for example
# Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none;cron.none/var/log/messages
I have this strange error - I switched from postfix 2.6.5 to 2.8.2 and I some mailservers cannot send mail to me. One of them was some sendmail server. I have virtual alias maps in mysql. It works fine for almost all server that are sending mail to me, but some of them seems to send mails as user@FQDN instead of user@virtualdomain my machine name is x49.tvujweb.cz, and mz email is kamil.horky@servis-it.net but in server logs is that user kamil.horky@x49.tvujweb.cz cannot be found in virtual alias maps.
i am trying to run bind in centos 6 and bind keeps giving me errors every time i check all of the configurations. the named.conf file works fine but the zone files keep giving me errors heres the contents of my named.conf file
I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.
This is the common part:
Code:
AuthType Basic AuthBasicProvider ldap anon Order allow,deny Allow from all
This part by itself works for the LDAP authentication:
Anonymous guest Anonymous_VerifyEmail Off Anonymous_MustGiveEmail Off Anonymous_LogEmail on Require valid-user
But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?
Am running the latest CentOS5 with Bind. Bind will run for a period(time period unknown) the shutsdoown. We need to every day start the service. When the service starts there are no errors given.
I had centos 5-5 server with 6G of RAM and 4 core cpu 3GHZ i installed bind 9.7.1-p2 on my server with multi thread support there are a lot of dns requests on my server , about 2500 Packets/sec and 3Mbit UDP traffic but my server response week to most of them.
For example when i use nslookup or dig command to query Yahoo.com the response from server maybe deliver about 5 Sec or become timed out , but sometimes response time less than 1 sec!
I don't know why, perhaps kernel works week so i decided to do the following :
But the problem didn't solved
I previously had Freebsd with same version of bind and same configuration and everything worked fine.
I installed BIND 9.7.3 from source on Centos 5.5, and chrooted it, and I'm getting an error when I run 'service named status' I get a reply, but at the end it says 'named dead but pid file exists'
Here's the entire output:
[root@ns etc]# service named status version: 9.7.3 number of zones: 23 debug level: 0 xfers running: 0 xfers deferred: 0 soa queries in progress: 0 query logging is OFF recursive clients: 0/0/1000 tcp clients: 0/100 server is up and running named dead but pid file exists Nothing is logged in /var/log/messages. Named is running and responding correctly. How can I get rid of this error?
i have xp and virtual guest centos 5.i install apache, bind, squid and webmin through xp, i can access URL...but when i start my squid, put the ip in the browser proxy settings, when i logon its ip turn to URL...I believe my bind is working. Though theres some little glitch. I dont know where.and i already put my servers bind ip to my winxp primary dns server settings.