Now i am setting up wifi hot spot with this guide. During this set up i got this error,after i type command #sudo radtest "John Doe" hello 127.0.0.1 0 radiussecret"radclient: no response from server for ID 47 socket 3"
View 1 RepliesNow i am setting up wifi hot spot with this guide. During this set up i got this error, after i type command #sudo radtest "John Doe" hello 127.0.0.1 0 radiussecret "radclient: no response from server for ID 47 socket 3"
View 5 Replies View RelatedI need to set up a Radius server for use in an ISP which will be wireless internet only.
I had thought to use Centos maybe and install and somehow configure Freeradius.
I have little experience with Linux, but am a Windows Admin, and use Linux a little.
My questions would be: Is there a best distro that i should use?? I have used Ubuntu the most, but not sure if it is best to use for this project.
Freeradius website has documentation but it doesnt tell me much about how to get it all up and running, What we want is Authentication and Accounting and from what i can see Freeradius is a good option? Is there anything better that i can use? We will be eventually having approximately 5000 clients.
i have a project from my boss to make radius server on fedora 13 i 686. can u tell the step by step how to build radius server on fedora 13???? thx u for sharing
View 3 Replies View Relatedcreating a radius server. i need info regarding books or webpages.
View 4 Replies View RelatedI have intalled RADIUS server on one machine which has fedora 10. I have installed freeradius-server-2.1.10 on it(server machine IP 10.150.110.42).
I have one more machine with redhat linux on which i have installed pam_radius-1.3.17(client machine IP 10.150.113.4).
I have done the follwoing configuration at both sides
SERVER SIDE.
users file
"vijay" Auth-Type := Local, Cleartext-Password == "123qwe", NAS-IP-Address == "10.150.113.4"
Reply-Message = "Hello, %u"
[Code]....
Above mentioned is my configuration. when i try to connect client with SSH it is not sending a request for authenticating user to RADIUS server. what else configuration i have to do, or if there are any mistakes in my configuration
I have installed FreeRadius to a Debian Linux server.I have configured an account called Support to run the Radius as I didn't want Root to be the user to run this.I want Radius to start up automatically after the system is rebooted but I don't know how to do this. I am new to Linux so please bare with me. If the system is rebooted, is it possible for the Support account to be logged in automatically? Is there a script I can create to automatically login the Support account? This may not be secure but it has been requested. Also the main question is after a reboot can the Radius be configured to automatically start without the need for someone to login? So if the system is rebooted and then goes back to login prompt, can the Radius then be running?
I have had a good search about scripts but with my limited knowledge it isn't too easy.
After reading it also said something about using rc.radiusd which will automatically start Radius after a reboot, but again I cannot understand exactly what I need to do.Please can someone help out with this and let me know if I am on the right track? Will the start-my-radius.sh script work after the system is rebooted without someone actually login and how do I get it to work?Please explain clearly as this is all a bit technical for my liking and not understanding it well!
How to configure Web authentication against RADIUS server on Debian Jessie, because the package libapache2-mod-auth-radius is not available on debian mirrors.
I would like to know what happened to this package and what is the newest way to configure radius auth. Some people have told me to compile this package, but is there not an easier way to do that?
this is all I need simple VPN with authentication to external Radius server. Here is what I have done to try and get this goal accomplished. 1st try using PPTPD and Radius plugin No matter what I have tried (long explanation here [URL].. I can't get PPTPD to talk to my Radius server, even though I can authenticate using the same server and radius server using pam radius. PPTPD just won't, and so far the POTOP mail list has been quiet since my post to them and no replies/ideas in my other post, see forum link above.
2nd try using OpenVPN and their pam auth plugin. I give up on this one! I have the server working great BUT! As soon as I enable the plugin /usr/lib/openvpn/openvpn-auth-pam.so in the config I get this when trying to start the VPN server. kernel: [3725586.167177] openvpn[28364]: segfault at 0 ip 00007fd6e5e38fb4 sp 00007fff434f18f0 error 4 in openvpn-auth-pam.so[7fd6e5e38000+3000] Google turns up nothing on Segfaults on the openvpn-auth-pam.so Ug at my wits end, anybody have any other suggestions? I'm at a total loss ATM.
i want to authenticate user (client) via switch to the radius server(CentOS)Can anyone tell me the authentication/authorization configuration that should be made in the switch (huawei) and the radius server(centos).Esp. the main files under /etc/raddb/ in the Server& the configuration to be made under the radius server template "test"( as of my case)...
View 1 Replies View RelatedI'm having some problems setting up SSL certs.
Here's what I've done...
In the file ssl.conf I have (along with all the normal stuff):
Quote:
But, when I navigate to url], I get a 404 error (not found).
My SSL cert is with GoDaddy. I created the key and a csr file, for which GoDaddy supplied me with the files mydomain.com.crt and gd_bundle.crt. I placed all the files where they should be, and restarted Apache.
And... 404. No errors on Apache restart.
The cert still seems to be showing up as localhost.localdomain:
Quote:
When I go to [url], I'm told the cert is still a "self signed" cert (out of date, by the way).
The GoDaddy "help" on this (such that it is) is here: [url]
What can be the cause of this error.
dmesg | grep -i time
ACPI: PM-Timer IO Port: 0x408
Calibrating delay using timer specific routine.. 4658.19 BogoMIPS (lpj=2329098)
Using local APIC timer interrupts.
[code]....
So I am creating a LDAP server for my school's Linux lab, so users on our school network can log into the Linux machines.
I found a guide here url...Authentication
But during the install, I get the following error.
update-rc.d: warning: libnss-ldap start runlevel arguments (2 3 4 5) do not match LSB Default-Start values (none)
I've been using Kate for a while without any problems.
However, today I tried to install Kedit.
Then I got this message:
"There was an error setting up inter-process communications for KDE. The message returned by the system was:
Could not read network connection list. /home/mikeb/.DCOPserver_XXX__0
Please check that the "dcopserver" program is running!"
Then I uninstalled Kedit, hoping that the damage would be undone.
However, Kate still shows the same message upon startup.
So I reinstalled Kate, and got the same thing.
What did the Kedit installation mess up, and how I can I fix it so I can use Kate again?
I have installed FreeRadius to a Debian Linux server.
I have configured an account called Support to run the Radius as I didnt want Root to be the user to run this.
I want Radius to start up automatically after the system is rebooted but I don�t know how to do this. I am new to Linux so please bare with me. If the system is rebooted, is it possible for the Support account to be logged in automatically? Is there a script I can create to automatically login the Support account? This may not be secure but it has been requested. Also the main question is after a reboot can the Radius be configured to automatically start without the need for someone to login? So if the system is rebooted and then goes back to login prompt, can the Radius then be running?
I have had a good search about scripts but with my limited knowledge it isnt too easy.
So far Ive read it says to create a script in /etc/init.d which Ive done and named start-my-radius.sh I think Ive made It execuatable by chmod 777, if thats right?
The script looks like this:
But I dont know if thats even right? The radiusd is located in the /usr/local/sbin/ and the radacct and radius.log is located in / usr/local/var/log/radius
Some stuff I have read says it needs to link into /etc/rc.d but there isnt a rc.d directory, I have other rc directories which are rc1.d rc6.d.
After reading it also said something about using rc.radiusd which will automatically start Radius after a reboot, but again I cannot understand exactly what I need to do.
Let me know if I am on the right track? Will the start-my-radius.sh script work after the system is rebooted without someone actually login and how do I get it to work?
i installed freeradius 2.1.3 on fedora 10 and want to use it with ieee802.1x using peap.when i run command to start radius service in debug mode the following output come
[root@Fedora ~]# radiusd -X FreeRADIUS Version 2.1.3, for host i386-redhat-linux-gnu, built on Dec 8 2008 at 15:31:31 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
[Code]...
I just wanted to share something with you all. If this belongs somewhere else let me know.I got the idea from this thread.I wanted the show mouse effect to not rotate around my mouse (just a preference)and have the emitters directly under my cursor. So by editing two files it gave me the desired effect to an extent.
1. Just in case back up your compiz settings.
2. Open a terminal and type - sudo nautilus . It'll ask for your admin password.
3. The file manager should now be open, go to /usr/share/compiz/showmouse.xml copy the file and rename the copy to showmouse.xml.bak.
4. Open showmouse.xml with the text editor.
5. Scroll down to the bottom and look for the "radius" section. Go to the <min>10</min> entry and change it to 2. Save.
6. Go to /usr/lib/compiz/libshowmouse.so copy the file and rename the copy to libshowmouse.so.bak.
7. Open the file with Ghex and search for the string radius on the right side of the search box.
8. It'll look like a jumble of words, but look after the word radius and find <min>10</min> change to 2. Save.
9.Compiz should now disable itself.
10. Reboot and re-enable Compiz and try out the show mouse plugin, it should now allow you to use a smaller radius.
My startup script for Radius now works so it starts at boot time, the script is in /etc/init.d and looks like this
#!/bin/sh
/usr/local/sbin/radiusd -d /usr/local/var/log/radius/radacct/ -d /usr/local/etc/raddb/
After rebooting radius starts up automatically which is what I want.
However for security I dont want this to run under root, but I want to it run under a user and group called support
I have edited the radius.conf file and added
# for some finer-grained access controls.
#
user = support
group = support
[Code]....
i want to use squid with free radius and mysql. i am able to authenticate user if i am changing client browser. but i want to do authetication authorization and accounting without doing any change in client browser( transparent mode).
View 5 Replies View RelatedI was asked to setup 802.1x Port Based Authentication for users connecting to a Managed Cisco Switch. From what I was told, it should work like this:
- User plugs workstation into switch.
- Workstation asks user for radius credentials.
- Workstation is then able to authenticate to the Radius server.
- After workstation is authenticated, the switchport then becomes unrestricted and allows the workstation to communicate on the network.
I have created a Radius startup script in /etc/init.d for Debian which looks like this:
Now this works but when I boot my server it shows as ready to process requests and it doesnt login. I cant get a login prompt. If I do a CTRL C to try close this it doesnt work and just shows CTRL C on the screen, I can type in kill radius but nothing happens.
I guess its because my script is in debugging mode, most of the suggestions for a script said I should use:
However the radiusd a doesnt work and if I try to run using command radiusd in it comes up and says invalid command and I dont have the option to use
So if this script runs on my server, I could connect to the server through a putty session via port 22 and log on fine and do what I need too, but if I try to connect to the server directly after boot its just sitting on ready to process requests and I cannot do anything when directly at the server. On one particular server I didnt have the network confg right so I couldnt putty to it and now Im a bit stuck. Will I need to rebuild my server? As I canït break out of this ready to process requests and I cannot login as its just sitting there, I have tried connecting through serial management via my laptop but I cant do anything this way either the only way I could do anything was if I could get through to the server on putty.
There must be a way when directly at the server to cancel the radius and get logged in? As Ive mentioned CTRL C doesnt work. I can get to the ok prompt but not sure what command to use and if I could change the network config at the ok prompt or if I could somehow cancel the startup script at the ok prompt? I thought I could use the init commands to start the server without the script starting but the init commands don�t work and the server just sits there.
Also I guess I shouldnt be using radius X in my startup script, to prevent this problem is there something else I should be using? I tried using radius x (the small x) and I hit enter and then no process for radius starts .
I tried to install ubuntu 9.04 from wubi in windows 7 ultimate today. But it failed. I met a problem when installing: An error has occurred setting the element data. The request is not supported. The detailed information in installation log file is:
>>stdout=
01-26 13:29 DEBUG TaskList: # Cancelling tasklist
01-26 13:29 DEBUG TaskList: New task modify_bcd
01-26 13:29 ERROR root: Error executing command
>>command=C:WindowsSystem32cdedit.exe /set {d29666c7-0a4d-11df-a945-002268e2b352} device partition=I:
>>retval=1
>>stderr=An error has occurred setting the element data.
The request is not supported.
[Code].....
The request is not supported. I tried to use bcdedit /set <GUID> device partition=I: manually, but still have the same error.
i installed freeradius 2.1.3 on fedora 10 and want to use it with ieee802.1x using peap. when i run command to start radius service in debug mode the following output come
[Code]....
I'm trying to recompile racoon with libradius support however I'm having issues getting it to play nicely. It appears racoon uses the following implementation of tacacs+libradius [URL] however I'm having trouble compiling it:With a base configure and make I'm receiving the following:
[code]....
I'm trying to recompile racoon with libradius support however I'm having issues getting it to play nicely. It appears racoon uses the following implementation of tacacs+libradius [URL] however I'm having trouble compiling it: With a base configure and make I'm receiving the following:
[Code]...
Im trying to setup a radius server to use WPA2-Enterprise on a linksys wireless router. I have so far done the following from this link: [URL]... Im having trouble understanding/finding information on how to configure the configuration files so my radius server will work when somebody tries to authenticate.
View 3 Replies View RelatedI have opened/added the ports 1812 and 1813 (both tcp & udp) for radius server in the firewall.
when i use the command : telnet localhost 1812 , the connection says "refused", i get the following messages code...
I am trying to setup CentOS server 5 with tftp where the Cisco switch configs can be sent. I have the following:
[code]...
I like to run a mySql database server on a Ubuntu (which is no server) for local use only. Is there some instruction how to do this? I downloaded several DBMS but they all seem to assume a running server.
View 1 Replies View RelatedBecause our visitors/customers are short term, and may be configured incorrectly with their own mail servers we automagically redirect all port 25 traffic going to internal IP's to our own mail servers while on our network.(postfix on centos 5.6)While I have taken some measures to prevent it from spamming, I would greatly appreciate some assistance.I will be putting in clamav, but I haven't configured it yet with the mail.I am using postfix, but can also put on procmail or even spam assassin
View 6 Replies View Related