How to configure Web authentication against RADIUS server on Debian Jessie, because the package libapache2-mod-auth-radius is not available on debian mirrors.
I would like to know what happened to this package and what is the newest way to configure radius auth. Some people have told me to compile this package, but is there not an easier way to do that?
I have intalled RADIUS server on one machine which has fedora 10. I have installed freeradius-server-2.1.10 on it(server machine IP 10.150.110.42).
I have one more machine with redhat linux on which i have installed pam_radius-1.3.17(client machine IP 10.150.113.4).
I have done the follwoing configuration at both sides
SERVER SIDE.
users file
"vijay" Auth-Type := Local, Cleartext-Password == "123qwe", NAS-IP-Address == "10.150.113.4"
Reply-Message = "Hello, %u"
[Code]....
Above mentioned is my configuration. when i try to connect client with SSH it is not sending a request for authenticating user to RADIUS server. what else configuration i have to do, or if there are any mistakes in my configuration
this is all I need simple VPN with authentication to external Radius server. Here is what I have done to try and get this goal accomplished. 1st try using PPTPD and Radius plugin No matter what I have tried (long explanation here [URL].. I can't get PPTPD to talk to my Radius server, even though I can authenticate using the same server and radius server using pam radius. PPTPD just won't, and so far the POTOP mail list has been quiet since my post to them and no replies/ideas in my other post, see forum link above.
2nd try using OpenVPN and their pam auth plugin. I give up on this one! I have the server working great BUT! As soon as I enable the plugin /usr/lib/openvpn/openvpn-auth-pam.so in the config I get this when trying to start the VPN server. kernel: [3725586.167177] openvpn[28364]: segfault at 0 ip 00007fd6e5e38fb4 sp 00007fff434f18f0 error 4 in openvpn-auth-pam.so[7fd6e5e38000+3000] Google turns up nothing on Segfaults on the openvpn-auth-pam.so Ug at my wits end, anybody have any other suggestions? I'm at a total loss ATM.
i want to authenticate user (client) via switch to the radius server(CentOS)Can anyone tell me the authentication/authorization configuration that should be made in the switch (huawei) and the radius server(centos).Esp. the main files under /etc/raddb/ in the Server& the configuration to be made under the radius server template "test"( as of my case)...
View 1 Replies View RelatedI have a server acting as a proxy to a couple of IP cameras on my local network. The IP cameras require HTTP-Authentication (Basic) but I want the outward facing Apache server to automatically log in without prompting the user for a login.
My current configuration is:
Code:
That works as a proxy but still asks for a HTTP Auth login. Can I get Apache to pass the login details to the IP cameras so users can just hit up the proxy and view the camera without having to log in?
I am trying in debian 8.2 but i am not found packet libapache2-mod-auth-radius whereas i have been include dvd1-3 debian and dvd1-2 update debian in my system. Where is that packet stand?
View 1 Replies View RelatedI have set up authentication when I am logging from my laptop using windows 7 (putty) into Debian server (see this post [URL].....) but since my laptop is dual boot (Windows 7 and Ubuntu) how would I set up authentication when i am using Ubuntu since from Ubuntu I will be logging into Debian SSH as same user that I am when logging from windows?
View 1 Replies View RelatedI am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100
I was asked to setup 802.1x Port Based Authentication for users connecting to a Managed Cisco Switch. From what I was told, it should work like this:
- User plugs workstation into switch.
- Workstation asks user for radius credentials.
- Workstation is then able to authenticate to the Radius server.
- After workstation is authenticated, the switchport then becomes unrestricted and allows the workstation to communicate on the network.
I have suse10 64 bit installed. I am setting up a svn server on it. After installation and adding the modules ,while reloading the apache2 it's throwing the error as: HTML Code: httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
View 9 Replies View RelatedI have a Debian 5.0.7 installed to my server. I try to install Apache and SVN to this server. I use this tutorial: http://www.howtoforge.com/subversion...-ubuntu-server
But is unfortunately not working.
My apache virtual host configuration file is:
Code:
This passwd file containing 1 user:
Code:
The rights for the passwd file:
Code:
And apache2 is running like this:
Code:
And if I try to login to my page I got an "Internal Server Error" page.
And my error is in the apache log is this:
Code:
So I'm a little bit confused about it. The apache2 should have rights to open this file. I checked it, the file is exist and the apache2 is have rights for it. I don't understand it.
Installed Apache2 on a Debian Lenny system. copied my old /var/www/htnl over to the new system.
Now when I open my browser to my PC I get the index.html under /var/www not /var/www/html.
I have this in my httpd.conf:
Code:
From what I have read, the DocumentRoot should have pointed to /var/www/html overriding /var/www?
If I use "10.1.1.13/html" it works the way it should.
I need to set up a Radius server for use in an ISP which will be wireless internet only.
I had thought to use Centos maybe and install and somehow configure Freeradius.
I have little experience with Linux, but am a Windows Admin, and use Linux a little.
My questions would be: Is there a best distro that i should use?? I have used Ubuntu the most, but not sure if it is best to use for this project.
Freeradius website has documentation but it doesnt tell me much about how to get it all up and running, What we want is Authentication and Accounting and from what i can see Freeradius is a good option? Is there anything better that i can use? We will be eventually having approximately 5000 clients.
Now i am setting up wifi hot spot with this guide. During this set up i got this error, after i type command #sudo radtest "John Doe" hello 127.0.0.1 0 radiussecret "radclient: no response from server for ID 47 socket 3"
View 5 Replies View RelatedNow i am setting up wifi hot spot with this guide. During this set up i got this error,after i type command #sudo radtest "John Doe" hello 127.0.0.1 0 radiussecret"radclient: no response from server for ID 47 socket 3"
View 1 Replies View RelatedIm running a Debian 2.6.26-2-amd64 webserver with apache2 only on a Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz that has 2GB of ram in it. I installed htop a few days ago and have been looking on it for a few days now. the server idles on about 80~ish tasks constantly with arond 20 apache tasks/connections to it all the time and the cpu usages of the 2 cores at about 1% each. but asoon as more apache2 connections/task get started and the servers tasks reach 120-140~ Apache2 timesout if you try to go to the webpage i host on the server. when it's back down to around 80~tasks you can reach the webpage once again. why is this ? what's causing this to happen ?
View 3 Replies View Relatedi have a project from my boss to make radius server on fedora 13 i 686. can u tell the step by step how to build radius server on fedora 13???? thx u for sharing
View 3 Replies View Relatedcreating a radius server. i need info regarding books or webpages.
View 4 Replies View RelatedI have installed FreeRadius to a Debian Linux server.I have configured an account called Support to run the Radius as I didn't want Root to be the user to run this.I want Radius to start up automatically after the system is rebooted but I don't know how to do this. I am new to Linux so please bare with me. If the system is rebooted, is it possible for the Support account to be logged in automatically? Is there a script I can create to automatically login the Support account? This may not be secure but it has been requested. Also the main question is after a reboot can the Radius be configured to automatically start without the need for someone to login? So if the system is rebooted and then goes back to login prompt, can the Radius then be running?
I have had a good search about scripts but with my limited knowledge it isn't too easy.
After reading it also said something about using rc.radiusd which will automatically start Radius after a reboot, but again I cannot understand exactly what I need to do.Please can someone help out with this and let me know if I am on the right track? Will the start-my-radius.sh script work after the system is rebooted without someone actually login and how do I get it to work?Please explain clearly as this is all a bit technical for my liking and not understanding it well!
Upgraded webserver to Jessie as an upgrade to Wheezy produced errors, and before reboot everything was up and running, but as all upgrade docs and info I read, I rebooted the server. However it never came back. I have the original backup files before I did the Wheezy upgrade. I also have access by Rescue to the server.Made a back up of critical files and have a 24GB tar file and I can connect by SFTP.
how to check the Debian files... Grub etc.. I would prefer to find the issue than start again.I am not able to sudo from Putty. I cannot run apt-get update. I did go to chroot, but then I get unable to resolve host errors and Could not open lock file because Permission denied errors and asking if I am root.There is information by googling for start up issues, but as I am working remotely with a Rescue set up, a lot of the commands I see and have tied do not work.
Aprox. 1 time per day / every two days hangs the x-server. It hangs a few secs then is being killed and restarted. A popup window in the task bar tells me the restart of the x-server. After that about 15 sec. I can continue to work but sometimes the gtk2 apps lose their integrity thus I have to restart by logging off and in again.
Code: Select all Nov 3 09:25:30 PC2 org.kde.kuiserver[1070]: kuiserver: Fatal IO error: client killed
Nov 3 09:25:30 PC2 org.a11y.Bus[1070]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
what does it mean "Remote peer vanished with error" ? Remote access? I am not competent to evaluate that.
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u5 (2015-10-09)
deamon.log
[URL] ....
sys.log
[URL] ....
auth.log
[URL] ....
user.log
[URL] ....
dmesg
[URL] ....
I have no idea why, but my website times out as soon as you try to use the cart.(which invokes SSL)It seems to have happened after I went live from testing, but I checked my configurations, and I can't see anything awry in my apache2 confs.Has anyone run into this before?I don't know how or why this happened or how to even begin fxing it
View 9 Replies View RelatedI have upgraded my debian server on april when Jessie came up, but I *forgot* to reboot at this time. As a new kernel* was released this week as a security update, and since my server installed it (via unattended-upgrade on security packages), I rebooted it last night. It never came back online.
I have access to a rescue boot (Ubuntu 12.04 LTS), and tried to analyse the failure (by mounting /sys /dev /proc and /boot and chrooting), but without luck so far.
As it's a dedicated server, I don't have access to the console. What I know :
No log in var/log since the failed reboot. I don't know how to have/find others logs.Previous kernel was 3.2.0-4-amd64, new is 3.16.0-4-amd64, What I tried without luck) :
Change the booting kernel, via update-grub. Tried 3.2, 3.2 with sysvinit and 3.16 rescue mode I think. I should have done it right, but without console it's hard to tell.apt-get update/apt-get upgrade/apt-get dist-upgradeadding nomodeset to kernel load in grubWhat I haven't tried :
update-initramfs, I don't really know why it would block the boot
*linux-image-3.16.0-4-amd64:amd64 3.16.7-ckt11-1+deb8u2
I just set up a Squeeze server for a friend of mine using my exact apache2 settings. He has been playing around, having a bit of fun learning HTML, but he ran into a problem where one of his images would not display. I at first figured his HTML was incorrect, but after a very long time of trying to figure out the problem, I still do not know what is going on, so I think it must be an apache2 problem?[URL]..
View 14 Replies View RelatedOS: Debian 5.0.4
Server: Apache2
I've used mod_rewrite to rewrite my apache2 root (my.server.com/) to point to /var/www/drupal6/ instead of /var/www/. I also have a script installed in my cgi-bin (/usr/lib/cgi-bin) but since the rewrite I can't seem to access it. When I go to my.server.come/cgi-bin/test.pl, I get a page not found from my drupal.
Is there a way I can access my cgi-bin without resorting to accessing my drupal through my.server.com/drupal6/?
Background: I have installed drupal CMS which has a base address of my.server.com/drupal6/ as it resided in /var/www/drupal6/. However I wanted users to be able to access it as my.server.com/ so I added the following into my httpd.conf
Code:
NameVirtualHost *:80
<Directory /var/www/drupal6>
RewriteEngine on
RewriteBase /
[Code].....
I've installed Nginx-full on a debian jessie server and want to install Wordpress, but for some reason Nginx-full isn't being seen as providing the httpd virtual package, so wordpress insists on installing apache.
According to everything I can find, nginx-full provides the httpd virtual package and this shouldn't happen. Is this a bug?
I have an older computer and I did a fresh install of Jessie
Procesor AMD, Graphic card ATI Radeon 9200 PRO / RV280
After instalation my computer boot into black screen. I have no problems with wheezy.
I installed manually firmware-linux-nonfree (in case) module R200_cp is loading correctly.
When I configure Xorg, my log file says something like that:
-----------------------------------------------------------------------------------
(EE) Segmentation fault at address 0x0
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
--------------------------------------------------------------------------
If I am running a script, let's say a install script. Is there a way to make Su repeat authentication rather then just returning "Authentication failed" and continuing the script?
View 3 Replies View RelatedI have a problem with ldap client authentication in ubuntu. I am using rhel5 as openldap server and I configured ubuntu as client, when I am trying to login the following message is coming."su: Authentication service cannot retrieve authentication info. Sorry"
But when I do search through "ldapsearch" command output is coming without any errors, Can anybody explain what would be problem.
I have a network and am using squid proxy with authentication I want to create another subnet without authentication.
View 1 Replies View Related