Server :: Extending Volume - Suse10 ?
Mar 23, 2011
I have taken over looking after a EMC/Suse iscsi storage network. We recently run out of space on our virtual disk, so I added another 100GB from our storage pool using the EMC management software and the virtual disk the suse box is using expanded from 1.5TB to 1.6TB. That completed fine.
However the SuSe host is still showing 1.5TB. Do I need to extend the volume somehow? Or is it just a case of restarting the suse box. I have umounted and re-mounted but no change. It is imperitive the current data on there REMAINS INTACT!
Code:
View 3 Replies
ADVERTISEMENT
Sep 20, 2010
I am trying to extend my / size as its full. Well the volume group is VolGroup00 & logical volume is LogVol00 but when. I run the command vgextend VolGroup00 /dev/sda8. It says volume group not found. Can it be because I have WindowsXP in my /dev/sda1, which falls under same Volgroup??
View 1 Replies
View Related
Jul 12, 2010
I used init 0 to make server shutdown,and replaced the power cord when I boot the server,it can't enter the GUI then I used init 5 and get the following message
Could not start the X server (your graphical environment)due to some internal error. contact your system administrator or check your syslog to diagnose. In the meantime this display will be disabled. Please restart GDM when the problem is corrected.
View 7 Replies
View Related
Jan 12, 2011
Where can I get mod_fastcgi for apache in suse10?
View 4 Replies
View Related
Aug 15, 2010
Which command i need to use to start or stop samba service in suse10? I tried rcsmbd start , ./smbd start , /etc/rc.d/init.d/smbd start and no result. And the second question . How i need to connect to samba server from windows7 ? Are there any samba client programs or i must connect from cmd ?
View 2 Replies
View Related
Apr 3, 2011
Salut tout le monde, alors j'ai essayer d'installer pure_ftpd sur suse10.0 mais ce dernier me signaler des erreurs de conflit de dpendance, et il m'a demand d'installer les
libs suivantes
libc.so.6 (GLIBC_2.4)
libcrypto.so.0.9.8
[code]...
View 1 Replies
View Related
Jan 1, 2010
I'd like to upgrade to suse 11.2 (currently using suse 10.2) and I've attached an external hard drive to save some data on, but it will only mount read-only, by either automount or by command line.
Here's the mount command I use (as root): mount -t ntfs -o rw /dev/sdb1 /media/ExpansionDrive
But when I look, permissions are dr-x------ 1 root root 4096 2009-12-05 13:38 cgate
Some related discussion on the opensuse forums has mentioned ntfs-3g, but my external filesystem type is ntfs. ntfs-3g is not available on my system currently or when I search for it with yast. I'm assuming I don't necessarily need ntfs-3g in order to mount my drive as read-write, but please correct me if I'm wrong.
How To Mount NTFS Filesystem Partition Read Write Access in openSUSE
However, these have not been specific enough to solve this particular issue. I can't think of any other possible problems other than the ntfs-3g.
Not sure if this is necessary, but I'm using SUSE 10.2, kernel 2.6.18.2-34, and the external drive is a Seagate 1TB.
View 1 Replies
View Related
Jul 23, 2009
i have been trying to find the nano or pine text editor for suse 10 64bit architecture but unable to find it and use it. i am not interested in vi editor. i have been using nano for fedora/RHEL for a long time. in finding rpm of nano/pico for suse 64bit architecture.
View 3 Replies
View Related
Jun 23, 2011
I have extended the Logical Volume and when I do an lvmdiskscan it shows the new extened value but when I do a df -h the mount (/var) still shows the old value?
View 1 Replies
View Related
Aug 31, 2010
i would like to extend my main file system into the unallocated space that i have on my hard drive, the unallocated space is most of it, as it used to be a partition but was deleted, do i have to do this with a boot up disk because i think that it can only be done on an unmounted partition, or is there a way to do this while linux is running in the main partition.
View 1 Replies
View Related
Jun 12, 2011
Background is not extending into my second monitor but the top taskbarand mouse do show.The resolution is slightly out also but can't fix that right now
OS:
Ubuntu 32bit 11.04
Unity
[code]...
View 3 Replies
View Related
Oct 4, 2010
Is it possible if I am only using ext3 and no LVM or anything else to re-size the partition into another physical device? I am pretty sure the answer to this is no but I was still curious as I am facing a full 1tb disk and need to add a new drive and unsure how to do this due to shared folders existing on the old drive and no way to actually expand them without linking in new files or something.
View 8 Replies
View Related
Feb 24, 2010
I have installed Ubuntu 9.10 using Wubi. During the install I allocated 100Gb to Ubuntu, is there any way without reinstalling of extending this, I want to give Ubuntu another 50Gb.
View 2 Replies
View Related
Nov 6, 2010
I have an ADSL router, wireless, at my home. However, the wifi range is extremely limited. I want to be able to have the wifi all over the house, or atleast about 20 feet away from till where it reaches till now (father and grandfather under the same roof can be a problem.)
So how do i get to it? can I get another router and have it connect to the present router? The present one is one with ethernet and wifi outputs, limited to 4 connections i think, and i have it configured to dial to the net automatically, i.e.: no dsl dial up from pc reqd.
View 6 Replies
View Related
Apr 5, 2011
I have serwer Debian with my website. My provider splited the disc into 5GB partition for / and 495GB partition for /var. Everything was going ok for over two years but now I don't have enough memory on /. I'd like to increase the partition but the problem is that /var is just next to it so I can't easily change the end of the first one. I need some safe solution. It might be even just shrinking partition for /var, adding new one after if it helps anyhow (I have about 450GB free memory).
Some outputs
Code: # df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 5201536 5173904 0 100% /
tmpfs 1023464 0 1023464 0% /lib/init/rw
udev 10240 2672 7568 27% /dev
tmpfs 1023464 0 1023464 0% /dev/shm
/dev/sda2 478812280 10336484 444345032 3% /var
overflow 1024 4 1020 1% /tmp
# parted print
GNU Parted 2.3
Using /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
Model: ATA ST3500418AS (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 512B 5369MB 5369MB primary ext3 boot
2 5369MB 500GB 494GB primary ext3
3 500GB 500GB 538MB primary linux-swap(v1)
View 2 Replies
View Related
May 9, 2010
Is this possible? I have 2 screens and I'd like to see if I can use the same panel on both sides.
View 1 Replies
View Related
Aug 24, 2010
I'm still pretty new to servers and ubuntu and have ran into something I could see being a problem in the future. On a dedicated remote server I have installed a web server using the "How To Forge - Perfect server set up for ubuntu 10.04 and ispconfig". I have a forum and email up and running and shoutcast radio and teamspeak3 servers also. We can also nx into it if need be. I can reformat the 1T hdd remotely from my provider control panel and ssh is installed at the same time and a new root password is sent via email. The thing is I now realise that by default the file system is written to a 10gig partition.
This might usually be ok but ispconfig uses the /var/www folder on the file system to house the forum I host and the partition is filling up. My mate I co rent with is talking about starting a parrot/bird owners forum and i might eventually like to have a gaming forum as well. I realise I should probably have set things up differently but like I said I am new at all this and tbh the home directories never going to have much in it so theres 900 gig doing nothing. So my question is can I use anything to enlarge that partition remotely? I know theres gparted on disc and all the articles I found say I need to use a disc which obviously is out of the question.
So what I think I need is some sort of partition magic for ubuntu. I would really like to expand it so all my current files etc on it would stay as is. I'm also currently looking into back up methods and wondered if that would be the way to go? Back up my file system and home directories and then reformat and make the partition larger? Or could I copy the entire www folder to a newly created folder in /home and re write the site enabled files to point to it? Would this work and if so what else would I need to edit?
View 9 Replies
View Related
Jun 27, 2010
I have installed oracle enterprise linux on VM ware with 20 gb allocated to guest OS. Now I want to install oracle apps in the guest Os, so I need to extend the volume. I have extended in Vm , but I have to partition in the guest OS, for that purpose I am using Gparted. But I am unable to extend to sda1. I need to have all the unallocation space allocated to sda1. Here is the screen shot, how can I do that. Right now when in press the command df -h in terminal I am gettig 18 gb as space available for sda1, I want to make it 200 gb, in which I would like to install oracle apps. Check out my screen shot.
View 5 Replies
View Related
Mar 22, 2010
My brother has just installed 9.10 on his Inspiron 6400 and would like to have a dual screen setup using both the laptop display and a flatscreen attached to the VGA socket. Using the standard display options, the two displays are recognised and when the 'mirror screens' option is disabled then settings applied it works to the extent of allowing the cursor to move between the two monitors; however the monitors display nothing except a black screen and the cursor.
I've updated everything to the current version, had a look for restricted drivers (none are suggested by the GUI tool thing) and checked both displays work (both independently and as mirrored). I also had a look for an xorg.conf to poke around in but there wasn't one there.
View 1 Replies
View Related
Jun 13, 2010
I'm running squeeze (last updated today), and everything has been working great. There is only thing that would simplify my life minutely..Anybody know how can I have the volume buttons on my laptop change the "pcm" channel volume rather than "master"? If they could control pcm, then I could adjust the volume coming out of my headphones or my computer speaker (both controlled by pcm, but not master...seems strange to me) with just one click.I tried to find this info online, but all results seem to refer to an older version. The simple "click here, set this" solution no longer is possible.
View 2 Replies
View Related
Feb 27, 2011
Debian Squeeze 6.0.0 on a Thinkpad T43, sound volume is not synchronized between the laptop volume buttons and GNOME's Volume Applet. So if I turn the volume all the way down with the physical buttons, the volume applet may still indicate 75%.I did not have this problem in Debian Lenny. Pressing the volume buttons used to show a volume bar on the screen, as did pressing the mute button.
View 8 Replies
View Related
Jul 17, 2010
Is there a way to default volume to 100% in the terminal with gnome-volume-control-applet or any other program? I am setting up a dedicated Zsnes machine which boots into Fluxbox but the volume is muted by default. There isn't a man page for gnome-volume-control-applet.
When I log into Gnome the volume is set to 100%, but Fluxbox is always set to mute.
View 1 Replies
View Related
Oct 29, 2010
I've got my xubuntu 10.10 install just about perfect on a little acer aspire d250, apart from a small sound useability issue: In the interests of simplicity and resource usage I removed pulseaudio. After a bit of fiddling I got it so that my USB soundcard (ProDac) is recognized and automatically set as the default soundcard when plugged in. Any sound applications automatically use the USB sound if it present, no need to around with pulse. The only problem is that my netbook's volume control keys still only control the master volume of the inbuilt soundcard, and have no effect on the usb sound. Does anyone know of a way to change which sound device these keys actually effect? I'd like to write a little script so that when the usb device is detected the keys are remapped.
View 1 Replies
View Related
Mar 7, 2011
I'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
View 1 Replies
View Related
Mar 24, 2011
I used Ubuntu 10.10 (64 bit) on IMac i7. As far as, I remember, after installing Pulse-Audio Equalizer, for each restart of the system, after login screen, system sets volume to maximum value. What can I do?
View 1 Replies
View Related
Feb 8, 2011
I have a machine which had a hardware fault and I want to read the disks by plugging them into a SATA-USB docking station in another machineWhen I do thisI can see the partitions on the old disk, but cannot read the LVM volumes on one of these physical partitions.Commands like pvscan do not find anything on this disk. Apparently you are supposed to export the volumes before trying to read them on a new system, but this was not performed. Does anyone know how to access the data on this disk? Surely it is possible.
View 1 Replies
View Related
Jun 12, 2010
since using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
[Code]...
View 6 Replies
View Related
Jan 22, 2011
I don't know much about lvm and I've managed to screw up a drive. I had a 500GB drive with FC14 on it and I wanted to copy over a load of data to my new 1TB that was replacing it. I set up my new install the same way as the old...including the same volume names (error number 1 I think) I successfully mounted the old/500GB drive (using vgscan and vgchange -a y etc.) using a laptop (running FC13) and an external hdd cradle. I could access the files I wanted but this wasn't the machine I wanted to copy them to (I was doing this while waiting for the install to finish on the new drive).
When I tried the same process on the new install I found that having two lvm with the same name meant I couldn't mount the external one. So I opened the disk utility (palimsest) and was going to change the name of the old volume group but it wouldn't let me do that. I then thought maybe I could get away with just changing the name of the partition where the files were and maybe I could add it to the mounted group or something so I changed it to lv_home2. This changed the name of my new/1TB lv_home to lv_home2 as well. So thinking that wasn't the answer I just changed the name of the new lv_home2 back to lv_home.
From that point on I haven't been able to see the old drives partitions (the new volume group still works so far). I has a physical volume but the volume group and volume names are gone from view. When I try to vgscan on my main computer or the laptop I had it working on earlier I get:
[Code]....
View 3 Replies
View Related
Dec 1, 2010
I'm rearranging a bunch of disks on my server at home and I find myself in the position of wanting to move a bunch of LVM logical volumes to another volume group. Is there a simple way to do this? I saw mention of a cplv command but this seems to be either old or not something that was ever available for linux.
View 2 Replies
View Related
Sep 9, 2010
I'm using 10.04 now and it runs ok, except one strange thing in the Volume control applet. Sometimes, when I click on the volume slider, it moves up. Even if I try to slide it down, it moves up on every click. The same when I click left of it - it keeps moving up! This is very annoying at night when the music gets loud and wakes everybody. It happens with or without Compiz turned on
View 3 Replies
View Related
