Is there a command to explicitly park the heads of a particular hard drive?
I have a hot swap tray and want to issue commands to sync and park heads before removal.
I've noticed since day one of installing openSUSE that my hard drive makes faint clicking noises quite frequently. At first I thought my drive was bad but after doing an extensive SMART diagnostics test (Passed) and researching on internet I've found that the clicking is actually the heads of my hard drive being put to the rest position via openSUSE's power management. I've confirmed this because if I run this command:
Code:
sudo /sbin/hdparm -B 254 /dev/sda
My hard drive will no longer make any noises and will run silently until the next reboot, as it keeps the hard drive spinning constantly. I'm basically asking (Because I'm paranoid) if the frequent hard drive head movement will reduce the hard drive's life span? I want to find out because I recently upgraded from a 160 GB 5400 rpm WD Scorpio Blue hard drive to a 500 GB 7200 rpm WD Scorpio Black. My old hard drive did not make as nearly as much clicking noises as my new one does, but the clicking can also be heard in Windows (Though not as frequent).
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies View RelatedCommand to switch to a different hard drive. I have multiple hard drives in my computer. One called storage and the other one called filesystem. I would like to know how can i access the Storage hard drive via the terminal.
View 6 Replies View RelatedI wrote a part of a bootable image to the hard drive with the dd command and now i can't finish installing a linux without getting a grub fatal error.how can i restore my hard drive?
View 6 Replies View RelatedUbuntu is getting stuck at the loading screen after an aborted attempt to upgrade to 11.04. It's my own fault - the install was running out of room on /, and I, like an idiot, decided to delete some package files under /var/something/archive, thinking they were "old"... I quickly realized they were in fact the new packages being installed... anyway after killing the thing and rebooting it is pretty damn broken (mostly because I can't get networking going so running in dpkg repair mode doesn't do much because, well, I deleted the packages).
I want to copy all the files off my /home and other meaningful partitions onto an external drive so I can just do a clean install. I can actually login to the command line under recovery mode, but I can't get the GUI started. I know it's possible to copy the contents of the partitions to an external
I have a working fstab entry:
Quote:
/dev/sdc1 /media/sdc vfat rw,nosuid,nodev,uhelper=devkit,uid=1000,gid=1000,s hortname=mixed,dmask=0077,utf8=1,flush 0 0
But how do I mount the sdc drive with those options from the command-line without restarting? I've tried to do so with 'mount' utility, but had no luck.
When at the console, what is the command (if there is one) to determine memory usage (used/free) on the hard drive that is being used for one's OS?
View 2 Replies View RelatedI normally use the "locate" command to find files that I have on my local drive. However, if I wanted to do this for an external drive, how would I go about this?
From what little I know about Linux, I'm guessing that it creates a reference file from which it performs the search when the command is typed. If I'm right this is updated at a given interval or when "updatedb" is used?
As the external hard drive is not always mounted is it best to create another of these reference files and have a different command (e.g. locateext) or something? Or is it best to add the external hard drive's location to the list of files that get added with updatedb.
I'm running Fedora 11.
I've been dual-booting win7 and ubuntu on my comp for a while, but didn't bother updating grub. I just updated to grub 2, but it wouldn't let me boot and said my hard drive was missing, also giving me a grub safety command line.
View 3 Replies View RelatedI got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedI have a Linux application(ProMAX 5000) running in a virtual Machine on my windows OS. I am using an external Hard drive of 250G in ext2 file system as my device for large data read, write & execute file system. I have already mounted the device from /etc/fstab. But i want my application to access this device as a Primary data storage device OR Secondary storage device. What command will i invoke to partition this 250G drive as my primary or secondary storage device.
View 1 Replies View RelatedMy parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
pls suggest me how to mirroring two hard disk drive in rhel9 server.i can do raid on those hard drive but user requer mirroring.so pls help how could i do this, mirror two hard drive.
View 2 Replies View RelatedI currently have a centos 4.4 I believe running with a 250GB hard drive. I want to make an image of that hard drive. I have tried removing the drive and connecting it to my windows pc using an adapter that would allow my windows machine run the hard drive as it was a regular external hard drive. Of course windows doesn't reconize that drive since it is linux partitioned. I am thinking that I need to have the hard drive inthe box I am wanting to copy and put in a blank drive in the box that I want to copy to. And boot from a live CD and use cat or dd to copy it. I have seen the commands before bust I am thinking this is the only way. Basically I am wanting to have a duplicate of the drive and build a whole new server that is already all setup.I will just change the host name and assign it another Public facing UP. Is this correct? Oh, and the new server will have different hardware. Might even be AMD or intel different from source or destination.
View 12 Replies View RelatedA section of the hard drive on my laptop is damaged but the laptop has genearlly been running fine as it seems to very rarely touch that section (once every few months). However, when installing some updates the computer has hit that section which means it becomes unresponsive and makes a nasty clunking sound every 10s or so. Because of this I've had to abort the update but now whenever I try to run 'dpkg --configure -a' to sort out the problem caused by the interrupted update I get the same freezing up and clunking. The message that appears when I run the command is adding extension /usr/lib/openoffice/basis3.0/program/mailmerge.py... and then it freezes.
View 2 Replies View RelatedI have two identical 160GB hard drives and I'm planning on setting up a server, probably ubuntu, for Glassfish, mysql and subversion. ince I'm using those applications I'm assuming I should have a large var partition for mysql, and /opt for glassfish and I'm not sure about subversion. Is there a good partition layout you can suggest for me for my 2 drives?
View 1 Replies View RelatedTrying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies View RelatedSometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies View RelatedI just installed Ubuntu 10.10 server on my server computer. I have all my files on separate hard drives and am trying to find them (I am fairly new to linux). These hard drives were unplugged during the installation. After I was done installing I shut it down and plugged them in. They are NTFS format. Will they automatically mount? If so where are they? If they do not automatically mount how can I mount them?
View 1 Replies View RelatedI have a linux box that I'm using as a ADSL router (slack 12.1).Until recently I had two hard drives in it, one for linux, and one for storing movies, music, etc.So, I have just bought another 1,5 TB disk. My plan was to add it to the same mount location: /opt/abram to expand my storage disk, only to come to conclusion that this can't be done. OK, it actually makes sense, if I thought about it I would realise it before. Anyway, what else can I do? Is there a way to add new drive to existing one in a way that would result in one 2,5 TB drive?
I tried it with mdadm, but as it turns out, it's impossible to crate RAID 0 without loosing all the data on sda1 disc.Also, it would be very cool if I could find a solution that would enable me to one day add a new drive to further expend my storage.I'm aware that I could mount my new disk to, let's say /opt/abram/Divx, or /opt/abram/mp3, but that's not the solution I'm looking for.
One of our clients uses a mobile client, which "helo"s with a non-resolvable hostname (which contains the correct IPv4 address in the name but does not resolve). I'd like to be able to config PERMIT "joeblow@mydomain" when the helo-names "*.mobilepool.carrier.net". Can anybody give me a hint how to do this, if it is even possible?Right now it just rejects based on not resolving the HELO name.
View 2 Replies View RelatedI have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies View RelatedMy servers (10.10) motherboard has failed so to access my data I've taken the hard drive out and tried to connect to it via my ubuntu desktop (10.10). I've tried it in a hard drive caddy and installed in my pc, but could only see a 255Mb Filesystem with a few folders and files on it. how to mount the portion of the disk that I can't see? Ie. the part with all of the data on it.
View 7 Replies View RelatedI'm connected remotely with Putty to a linux server and I need to get the files from a directory on the server onto my hard drive on my laptop. I don't know what the secure shell command is to download it or what exactly I need to do so I can get these .root files from the server copied onto my local hard drive.
View 2 Replies View RelatedI am looking to buy a USB hard drive that will work with Ubuntu 8.04 LTS Server, is there anything I need to look out for? Are there any computability issues I should be aware of? I have looked through Ubuntu's documentation but couldn't really find anything.
View 3 Replies View RelatedAny basic description of how linux assigns drive letters? I understand that a drive letter assignment is not static. If I add a drive between /dev/sda and /dev/sdb, my /dev/sdb will become /dev/sdc and the new drive will become /dev/sdb. I have a hot swap tray and have come into some unexpected behavior. I removed /dev/sde from the hot swap tray and then loaded another drive into this same tray. When I mounted the new drive with options in fstab, it wouldn't mount because the new drive was /dev/sdf, not /dev/sde. Apparently, linux is looking at the id of the drive in addition to it's place in the BIOS chain.
My fstab entry is:
/dev/sde /backups auto noauto,rw,noexec,async,user 0 0
I was avoiding using UUIDs in the fstab so that new HDDs would not have to be "registered" in the fstab prior to use. Is there a way to tell linux (or fstab) whatever drive is plugged into SATA channel X mount to /mountpoint?
By using ISO2USB for CentOS/RedHat I installed with out having to burn A single cd or dvd. Super easy and free from source forge. Link[URL]... Unplug the USB drive and take it to the machine to be installed.Reboot the machine and choose USB boot option in the BIOS boot menu. Choose Hard drive installation method and select /dev/sdb1 as partition that holds ISO images. Use sda drive for installation and choose to review the partitioning layout. In advanced bootloader options, change drive order to "sda sdb". Proceed with the installation.
So easy it should be a tool in every admins box. I hope I saved you some time and headaches.
I have been playing around with vlc media player and figured out how to play and record ..... videos with it but was having problems when i was trying to play a video from south park studios or hulu.
View 1 Replies View RelatedWe have a server at a friends house with a hard disk that's filling up so he picked up another hard drive.
My question is.. can I install it and then configure it so to the user it seems transparent and they just see the extra space all on one drive/directory? (From Windows)
It's running centos 5 with samba ... with EXT3.. and I don't believe it's using LVM.
