I've been dual-booting win7 and ubuntu on my comp for a while, but didn't bother updating grub. I just updated to grub 2, but it wouldn't let me boot and said my hard drive was missing, also giving me a grub safety command line.
View 3 Replies
Today, I finished assembling my dream computer. I can boot it into the BIOS, and I checked that everything was working correctly through there. Anyway, I attempted to transfer the hard drive from this computer to that one. This computer is a Dell (blech) Optiplex GX280 with an Intel processor and integrated graphics. The new one has an AMD Phenom II processor with an ATI card and an ASRock motherboard (drastically different machines, I know...) When I try to boot, GRUB gives me an error message that says something like:
Code:
blah whatever cannot find /dev/disk/by-uuid/372de761-9577-48be-ba19-c6b2890cb229
Did I do something wrong installing the hard drive? Or is this a problem that is going to happen no matter how hard I try to make it not happen? If the second is true, will it help if I wipe the disk and reinstall Ubuntu on the new computer?
P.S. I know similar threads about transferring hard disks have been posted, but no thread has mentioned this error.
Ubuntu is getting stuck at the loading screen after an aborted attempt to upgrade to 11.04. It's my own fault - the install was running out of room on /, and I, like an idiot, decided to delete some package files under /var/something/archive, thinking they were "old"... I quickly realized they were in fact the new packages being installed... anyway after killing the thing and rebooting it is pretty damn broken (mostly because I can't get networking going so running in dpkg repair mode doesn't do much because, well, I deleted the packages).
I want to copy all the files off my /home and other meaningful partitions onto an external drive so I can just do a clean install. I can actually login to the command line under recovery mode, but I can't get the GUI started. I know it's possible to copy the contents of the partitions to an external
I have a working fstab entry:
Quote:
/dev/sdc1 /media/sdc vfat rw,nosuid,nodev,uhelper=devkit,uid=1000,gid=1000,s hortname=mixed,dmask=0077,utf8=1,flush 0 0
But how do I mount the sdc drive with those options from the command-line without restarting? I've tried to do so with 'mount' utility, but had no luck.
Alright I've got 2 hard drives in my computer and one of them has no data on it so I have to mount it to open it and once I do this it asks for a password to mount it.
View 8 Replies View RelatedI bought a new hard drive recently and I managed to drop it. Put it into the computer, used it for a day, all went fine. Now today, it has started giving out an intermittent, clearly audible rattle that will last for a few seconds at most; there doesn't appear to be much of a pattern to it, sometimes the drive keeps quiet for an hour, then it does it twice within a minute or five. FWIW, the drive was still in its plastic box when it hit the floor so that must have softened the blow. There is no visible damage to the drive although the plastic box was dented on one corner. Still, what do you reckon are the odds that it will die any time soon?
View 14 Replies View Relatedmy Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies View RelatedI am intended to simply make printf give "001 002 003 004 006.... 150" but with the single command line of SH (dash) ... not easy ...
Code:
tucholsky:~$ seq 1 1 150 | sed 's/([0-9]+).*/1/g' | tr '
' ' '
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
[code]...
For the geeks, which distro/version is it, based on the code above
Code:
grub-install -v
grub-install (GNU GRUB 0.97)
I loaded GRUB, and now when I reboot it goes straight into the 'grub>' command line. Initially GRUB had the root as (hd0,2), whereas the boot is on (hd0,1)...(hd0,2) is my '/home' partition, and (hd0,1) is my '/' partition... So on a bootup I ran...
Code:
root (hd0,1)
setup (hd0)
Now when I boot I still get the 'grub>' command line, but now the root is correct.
From 'grub>' I can type...
Code:
grub> configfile /boot/grub/menu.lst
GRUB will then show the menu, and I can click the listings to load them. All's fine, but why doesn't GRUB just load the menu.lst without my prompting? How can I automate this process of typing 'configfile /boot/grub/menu.lst' each time I boot?
Can I use the grub command line to reinstall grub from a ubuntu cd?
View 1 Replies View RelatedI can only boot fedora and red hat on my pc, I like fedora but Im having acpi problems and need to upgrade BIOS, which should be done from windows I hear. So I deleted fedora partition and plan on re-installing after all this.I've used http://www.ultimatebootcd.com/Iboot loads up but than complains of not finding something with acpiI tried knoppix but i think i was suppose to extract before I burned Ill try again if suggestedany ideas on how to get windows up i've tried many windows disc to no success
View 10 Replies View RelatedI'm having trouble locating my second hard disk on my fresh Ubuntu 10.4 install.
It's a terabyte drive that I cannot seem to find in Ubuntu. It's formatted in NTFS and is over 90% full of data.
If I boot into Windows 7 the drive appears fine and the data is all there and Windows disk scan doesn't report any problems.
The drive: WDC WD10EADS-00L5B1 ATA Device (as listed on Windows 7)
Disk 1 (According to Windows 7)
Here is my fstab, fdisk and uname:
As you can see from the above, my other drive is detected fine (the one with the Windows installation and Ubuntu installation on it)
On a side not, I don't have a floppy drive installed, so I'm not sure why fd0 is listed (perhaps it's irrelevant - I'm new to the Linux world so I wouldn't know)
I recently copied about 14gb from my external hard drive to my Windows 7 partition on my hard drive (from Ubuntu) I know where I put it, but I turned my laptop on today, and I can't find the files from either operating system, but the space is still missing.
View 2 Replies View RelatedOn a fresh install my 320GB computer shows a 317GB 'File System' a 'Swap Capacity of 3.1GB and 'Free Space' 273.8GB !
The 317GB doesn't want to partition
How do I get access to the remaining 43GB ..less whatever elbow room Linux needs to utilise which is not 43 GB !
I've managed to get a hold of a 160GB drive, which I hope to use as my system drive for a server that I'm setting up. This may be the tip of the iceberg (as it tends to be with me for some reason), but this is what's happening:
I got the drive, which has been used before but has been secure erased, and it's been sea tool-ed so is therefore as good as new. It shows up fine in the BIOS, and GParted discovers it straight away. I then split it into 3 partitions:
A ~10GB system partition - sdd1
A ~130GB storage partition - sdd2
A ~4GB swap partition - sdd3
GParted performs all actions straight away with no issues.
After partitioning, fdisk -l reports the following:
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x2bd2c32a
[Code]....
I've then gone to install Ubuntu. I go through all the major steps, up to where it asks you where you want to install Ubuntu... at which point sdd just doesn't show up at all. It shows sda, sdb and sdc fine, but sdd is nowhere to be seen.
Two things strike me as odd (although I suppose understandable) - Firstly, every partition in sdd mounts fine, but is owned by root. Secondly, each partition has a folder called 'lost+found' with varying amounts of data. There's 662.3MB in the 10GB partition's lost+found folder, and 6.9GB in the 130GB's folder.
I have an external harddrive of 500GB. It's almost fully loaded with TV series and movies. Nautilus says there's 60 GB remaining space. I just downloaded some movies, and copied it to this external hard drive.And here's the strange part, after I did this I only see a very small subset of all the movies I stored on that harddrive in nautilus. With 500 GB almost full, you can imagine there are quite some movies on it, but I only see 12 of them in nautilus.
View 2 Replies View RelatedMy Red Hat EL 5.5 64 bit edition, I've install it on my primary hard drive 12 GB it works fine and then I added secondary 20 GB hard drive (sdb1) into this system and then format it as VolGroup01 see the attachment, but how come it doesn't show up ?
Code:
This is not a huge deal but I have missing hard drive space, I re-sized an iso with k9copy I then used mv to move it to the other iso like so:
Code: mv this.iso that.iso which moved and renamed it, however I did not get any drive space back by effectively "deleting" the first iso. So my question is do I have an unnamed iso file floating around that cannot be deleted?
I just partitioned and installed slack on a 1TB hard drive. I then run KDiskFree under KDE, and saw that I am missing about 300Gig! Is it just a simple thing between bytes and bits like MS. Or is this an issue I can not ignore? I have 3 partitions. One is my swap, one is ext4(slackware is on) the last is a jfs partition.
View 7 Replies View Relatedwith that said i burned fedora 8, 10, and 11 checked the sha1 verified everything was fine i had originally installed fedora 8 on an old pc i had from windows XP without any problems messed with it some, upgraded to 10 again no problems. tired to update 11 got a message about ext3 not found ext4 not found, re installed 10 the loader loads up now i have a blank screen with a cursor it the left hand corner
again i had 10 installed fine prior to all this can any one point me in the right direction to solve this issue or am i way over my head trying to figure this stuff out. i have spent 3 days searching these forums.
i'm just not quite sure what i need to do. oh, i tried to install 8 again and it wouldn't take either. i think the 10 problem has something to do with the graphic driver it's a geforce 7400 nvidia and something to do with the grub, but like i said i get a blinking cursor and not quite sure how to access the grub or command line.
I used the Wubi installer to install the latest version (available from the website) on my second physical HDD. I rebooted my machine and used the Windows 7 bootloader to launch Ubuntu and it launched a GUI install. I wasn't sure how long it was going to take, so I left for about a half hour and when I returned I was back to my Windows 7 logon screen. Naturally, I assumed the install was a success and I rebooted my machine. When I boot again I get the Windows bootloader and I see my options for Windows 7 (which works properly) or Ubuntu. However, if I select Ubuntu I am brought to a command-line and there is an output at the top of the screen stating "Grub bootloader." At this point do I need to type anything to launch the GUI (I'm assuming Gnome) from this? How should I proceed from this point, reinstall?
View 9 Replies View RelatedDoes anyone know how to login through command line in grub.
View 14 Replies View Relatedafter my upgrades i noticed one hard drive was acting funny i was gonna reformat the drive anyway to totally remove winblows from my system grub was installed on the boot sector of the drive that failed how can i get the next drive in line to boot if some one can get me to a howto or tell me what i need to do short there of reinstalling the operating system.
View 5 Replies View RelatedI read this thread but
Code:
anisha@linux-uitj:~> su
Password:
[code]...
When I turned on my laptop today, instead of showing me the boot menu..it show grub command line..ie
Code:
grub>_
I have no knowledge about grub command line..still i tried to boot into my fc14 ..using these steps given here
[Code]...
Thus boot configuration files have been lost..i think I have to install Fedora again
Running Ubuntu 10.10. My desktop environment is screwed up and won't let me use the keyboard or mouse at the login screen. How can force a command prompt during boot?
Here's a method:
Alt-SysRq-e - Requests kernel kill all processes except init.
i have successfuly installed ubuntu karmic inside my windows 7. After an update, i restarted it. but it didnt boot ubuntu. instead it shows grub's command line. what should i do? all of my java projects/programs is in there.
View 2 Replies View RelatedAfter installing the 10.10 Maverick Meerkat, I decided to have a new partition and install Windows 7 on it for development purposes. So this is the method I worked with:
Partitioned the hard disk with gparted
Formatted the drive in NTFS
Installed Windows
Booted into Ubuntu 10.10 Live CD and re-installed grub on the MBR Now after restarting the system a grub command line boots up. I was able to boot into ubuntu with the following commands:
Code:
find /vmlinuz
kernel /vmlinuz root=/dev/hda1 (or its equivalent)
initrd /initrd
boot
Is there any way how to load up the grub GUI with the options to boot up Ubuntu or Windows 7 respectively?
It used to be with (old) grub you could hit a function key and add a runlevel option to boot a console, but I don't know how to do this here, wanting not to edit the grub config file, as seems the only apparent option: I'm trying to boot into SimplyMepis where there is no rescue menu option, so need the prompt?
View 4 Replies View RelatedI am running Natty Alpha 3. I used Update Manager to install something (not sure what it was), then I restarted, but instead of listing all the kernels, it gave me a command line. I don't know what happened and how to use it.
View 6 Replies View Related
