my boss wanna to built an Server Environment can be load about 5000's ppl online in the same time now there r have one server: Inter Xeon E5504 2.00GHZ 8GB memory , if i used apache system is redhat, how many can it loads.
View 1 RepliesI am having a strange problem with the Opensuse 11.2 Xorg server. Graphics hardware is Nvidia Quadro FX-5000, driver is ver 190.53. 90% of the time, I am getting a seg violation from the Xserver on trying to login via kdm:
[Code]...
...is the error that is present in the "kdm.log" file. So far, it doesn't seem to be user dependent (happens either as root or joe random user,) Again, so far, it only seems to happen with "driver nvidia" enabled in the config file, not with "driver nv" The failure occurs shortly after hitting return on the login screen. After it fails, it starts up a new Xserver, and presents a new login screen. Repeated attempts seem to *eventually* succeed, but 90% of the time, it fails I strongly suspect the Nvidia driver, but I have not been able to find anything documenting any similar problems.
during advance graphical debian squeeze installation, it displays the following message Detect network hardware Some of your hardware needs non-free firmware files to operate. The firmware can be loaded from removable media, such as a USB stick or floppy.
The missing firmware are: iwlwifi-5000-5.ucode iwlwifi-5000-4.ucode iwlwifi-5000-3.ucode iwlwifi-5000-2.ucode iwlwifi-5000-1.ucode If you have such media available now, insert it, and continue.
I have installed x-11 server using the command
"sudo apt-get install xserver-xorg xserver-xorg-core"
and
"sudo apt-get install openbox"
On the Ubuntu server 9.10 I dont know how to load the GUI environment .
This morning I noticed that there was an update to the kernel ready in the Update Manager, to version 2.6.35-25. I let Update Manager do its thing and I restarted my computer when it prompted me to.If I select 2.6.35-25-generic in Grub, Ubuntu boots just fine, all the way to the login screen. However, after entering my password, it looks like Gnome is going to load, but it never does. All I see is the default wallpaper and nothing else; the system locks up and does not respond to any input; and the fans start spinning at full-speed. My only option at this point is to do a hard shutdown. I have no problems if I select the kernel I was using previously: 2.6.35-24-generic
View 9 Replies View RelatedI have my first problem with drivers in Linux! I installed openSuSE 11.4 x86 on my computer (Intel Dual-Core 2,5 Ghz; Nvidia 7300 GS) and after installing graphical drivers (proprietary) I can't load the system. All I have is a progress bar of user's profile loading and playing the startup sound. I already installed openSUSE 11.4 x86_64 version on this computer and there was no problem with drivers.
View 8 Replies View RelatedDuring a software update the machine froze for a long time, I had no choice but to hard-crash (hold the power button to shutdown) starting up again I can get to the login screen and log in but there is no desktop environment visible, just a mouse pointer (which can be moved about) on a blank screen. I'm using Karmic Koala with Gnome (I am relatively new to Linux, I am essentially using the default package)
View 9 Replies View RelatedI have installed powerdns and powerdns recurser with the mysql backend. everything is working fine when I add a domain let's say www.test.com to the database and do host[URL].127.0.0.1 pdns returns the A record.Now what do I need to do next so that this dns works on the internet.I registered two nemservers ns1.mydomain.com and [URL]..at godaddy and set them to [URL].. is not working it seems like the dns server i built is not working from the internet.
View 1 Replies View RelatedBeing a former user of Fedora, i decided I'd like to give Ubuntu a try and install so i could switch from a windows environment for ruby on rails development.I downloaded the 10.10 ISO and burned the image to a DVD-RW (a cheap one) at 4xI'm deployed in afghanistan right now, and the only decent internet connection i have is in my office (i work in the network administration/operations office as a NETOPS NCO) and even then my downloads rarely exceed 50kbps. I also don't really have the best pick when it comes to writable media, i'm stuck with imation "plus" cd-r's and dvd-rw's.
After i burned the image to disc, i deleted the iso from my computer since i'm genereally not suppossed to keep personal files on work computers.When i boot to the disc it takes about 45 minutes on average to load into the live environment to do the install or try ubuntu, if i select try ubuntu it's another 10 minutes before it's done loading.The install is even slower, generally takes several hours to complete the install, once the install is complete and i select ubuntu in grub, i get a { DRDY ERR } ru When it tries to load ubuntu and kicks me back into the shell. Nothing appears to be wrong with my hard drive, checkdisk finds nothing.
General specs are:Intel Core i7 i7-720QM / 1.6 GHz 8GB DDR3 1333mhz ram2x 500gb hd'sBlu-ray/dvd/cd driveFull specs are at: the laptop is a g73jh-a1http://reviews.cnet.com/laptops/asus...-33950895.htmlI'm downloading the iso again and i'm going to try and burn it to a cd-r at the slowest possible speed, I'm mainly curious if it could be fualt of the disc i burned or if it has something to do with my computer.
We rebooted the server and getting:
BusyBox v1.1.3 (Debian 1:1.1.3-5ubuntu7) Built-in shell (ash)
Enter "help" for a list of built-in commands.
(initramfs)
When we boot from the live CD to run fsck manually, it cannot find the hdd partition. It's using Lilo boot loader.
I have installed the Apache, PHP and MYSQL in the rackspace cloud server environment. Can anyone please guide me How can I configure email server in that with postfix or some other with multiple domain.
View 3 Replies View RelatedI've seen many posts about setting up VPN's but my doubt goes further. I just need access to the local network of my office from a Windows XP (which of course is outside the LAN). I would like this PC to have access to the whole LAN, but what I really need is it to access to an Ubuntu Server (e.g. 192.168.0.10). The router is a Netgear DG834, which has a built in VPN functionality. So, is it enough if I set it up? Do I need to install any VPN server in Ubuntu? What if I want to access to another computer in the LAN? Where should I start?
View 4 Replies View RelatedOk so I've been all over Google trying to find an answer as to why my MPD server won't properly output over httpd. When I try to connect to it from any source, it gives me a "404:Entity Not Found" error. There hasn't been any useful info out there to solve this problem. Help please! Attached is my mpd.conf file. All my permissions and firewalls are set up properly AFAIK.
View 5 Replies View RelatedJust set up a 10.04 server today, running with dancer-ircd and dancer-services packages to create a private IRC server. However, there's a requirement to log chats against users/host/IP address for future reference. I was wondering if there was a built in server side approach (rather than separate bots per channel) to log chats in such a way?
View 1 Replies View RelatedI did a a basic install of postfix and dovecot instead of using courier-pop and courier-imap. This is only send and receiving e-mail locally within the test network 10.7.0.X and 10.0.0.X. I used:
[URL]
my postfix.conf is;
PHP Code:
[code]....
This is the error when I send an email from a local machine on the 10.0.0.X network.
PHP Code:
Jan 20 17:05:48 testbox postfix/smtpd[2491]: warning: Illegal address syntax from unknown[10.0.0.111] in MAIL command: <test@10.0.0.112>
how to run benq scanner 5000 and web cam im ubuntu
View 1 Replies View RelatedI just bought a new ASUS laptop with the Mobility Radeon HD 5470 card.It seems like there's no driver for it yet (the amd.com download wizard is a dead end because I only find the HD 4000 series).
Is there anything I can do to get support for this card? At least I'd like to be able to change resolution. Or do I simply have to wait for a new ATI driver?
So Ubuntu had been working great in Lucid, and when I upgraded to Maverick the support for my graphics card stopped. It has the proper driver ("ATI/AMD Proprietary FGLRX graphics driver") active and fglrx, fglrx-amdccle and fglrx-modaliases are all at 2:8.780-0ubuntu2. I also have the xorg radeon package installed. Yet, whenever I try to enable desktop effects (to get compiz to work) it says that Desktop effects could not be enabled.
View 3 Replies View RelatedI am pretty new to Ubuntu 10.10 and have been unable to successfully print to a HP Designjet 5000 42inch non Postscript printer that uses hpgl/2. I have installed other types of printers with no problem but this one has me beat so far. I will primarily want to print banners from Inkscape that will average 3 x 12 feet in size, and at least 150 dpi, so will need to be able to define custom size sheets. Currently I develop a project in Inkscape then print to file as a pdf, open the pdf from a windows xp machine on the same network with Adobe Reader and print to the Designjet from Adobe. This worked fine until I upgraded Adobe Reader to 10.01, it won't print very large files to the Designjet, iether. It would be very nice if I could print directly from Inkscape in Ubuntu to the Designjet printer. I do not print from Inkscape in Windows XP because the large files put both the program and operation system into a permanent non responsive state if they do not crash outright. I am able to print large files on the XP machine from Corel Draw 12 with no problem, but have not been able to get Corel Draw to accept any of the svg files that Inkscape produces.
View 1 Replies View Relatedlogitech webcam pro5000 which does not work with my computer, the webcam does not work even if i plug it to different ports,especially when am using "skype linux beta",i tried searching for forums and threads and even videos but it seems my weak mind cannot absorb the technical explanations on the said sites,
View 1 Replies View RelatedRunning web service and dhcp only on 1pc of a 4pc lan. Optomized minimal slackware 13.1 install (no GUI)on 30g fireball for only one user (myself):
Question is howto work properly in terminal environment: the rule of thumb is not to work on system as root to maintain root's integrity; since i do not have /home for users - what identity do i create to work on files safely? Can you adduser identity without /home as to not work as root? I found 'netgroup' but i am not sure that setting up the id of other machines on lan is what need to do?
In vlc, cheese I'm getting only this resolution.
[ 464.100250] uvcvideo: Adding mapping Brightness to control 00000000-0000-0000-0000-000000000101/2.
[ 464.100262] uvcvideo: Adding mapping Contrast to control 00000000-0000-0000-0000-000000000101/3.
[ 464.100270] uvcvideo: Adding mapping Hue to control 00000000-0000-0000-0000-000000000101/6.
[ 464.100279] uvcvideo: Adding mapping Saturation to control 00000000-0000-0000-0000-000000000101/7.
[ 464.100287] uvcvideo: Adding mapping Sharpness to control 00000000-0000-0000-0000-000000000101/8.
[ 464.100295] uvcvideo: Adding mapping Gamma to control 00000000-0000-0000-0000-000000000101/9.
[ 464.100304] uvcvideo: Adding mapping Backlight Compensation to control
[Code]...
Somewhy it is using YUY, but not MJPEG, although seems MJPEG can give larger resolution. How to get it? Single shot 1,3MPix technically possible, any way to do that?
My scanner is Benq 5000 ,the default scanning software (xsane) give me the following message whenever I plug the scanner to the pc :
Failed to Open Device 'Snapscan:libusb:005:002' Invalid Argument.
I tried the gnome image scanning software too but it didn't recognize the scanner at all. The only software that worked is vuescan but unfortunately it is non-free software !!!!
I can't get my wireless card to work. I downloaded a broadcom driver for it and i do believe its the right one, but its not helped. I'm running mint 8. The information on my internal wireless card i got using the terminal is:
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
[Code]....
So Ubuntu had been working great in Lucid, and when I upgraded to Maverick the support for my graphics card stopped. It has the proper driver ("ATI/AMD Proprietary FGLRX graphics driver") active and fglrx, fglrx-amdccle and fglrx-modaliases are all at 2:8.780-0ubuntu2. I also have the xorg radeon package installed. Yet, whenever I try to enable desktop effects (to get compiz to work) it says that Desktop effects could not be enabled.
View 4 Replies View RelatedI'm having trouble getting X to work after switching from onboard intel video to a 5000 series ATI card. Apparently I need to switch to a MESA or fglrx driver. I did a sudo apt-get install fglrx-driver and it installed but still no X. I'm currently using Karmic. I've tried to boot with a live CD which works fine and changed the xorg file manual but that was a mess.
When I start I get a checking battery state ... done and it stays there forever sometimes and sometimes I can login but without x. Typing startx gives me a long list that says check the xorg website. I've been looking around for a way to fix this and haven't been able to get it working.
I have a new system with an ati mobility radeon hd 5730 chip. As far as I know, there are new drivers in the works, but aside from some articles, I haven't found anything that specifically tells me how to get them installed/working (at least, so that it works for the 5000 series of radeon chips).Has anyone had any luck with this yet? I'm just at the stage of installing, so I don't really care if it involves a different distro, etc. I've tried Ubuntu 9.10 and 10.04-alpha2, as well as Fedora 12 (from the live CD) and so far no luck.At the moment, all I care about is getting the native 1600x800 working for my screen. I haven't a clue how do do that...it seems like I might be able to do this using xrandr, but I don't know how to create a mode properly.
View 6 Replies View RelatedI own a VPS (Virtual Private Server) and I would like to install a desktop environment on it. After installing the desktop enviroment, I would like to install a VNC server on the VPS, after that I would like to be able to configure the VNC server remotely via SSH and then log in using VNC to connect to that VPS. Is that possible? The reason I wanted to do that is because I want to use their internet connection to browse the web, their speed is like 6 times faster than mine because they have backbone which I can't afford.
View 1 Replies View Relateddistros: suse 85% / redhat 15%
Anyone use novells ZLM to manage their Linux environment? if not what do you use? (patching, config etc) and how do you like what you use?
I am setting up a new infrastructure which led me to install BIND in a non active directory (new) environment.
With that stated I don't have any .com nor any domain setup so im unable to dig my network domain; Im only operating via workgroup.
Is it still possible to setup BIND dns even though I dont have a domain (i.e. csaa.com, csaa.net...etc) setup?
Reason being is I want to be able to ping host names/connect through host names and able to resolve then using BIND as my main name server.