Debian Hardware :: Iwlwifi-5000-3.ucode And Iwlwifi-5000-4.ucode?
Aug 17, 2011
during advance graphical debian squeeze installation, it displays the following message Detect network hardware Some of your hardware needs non-free firmware files to operate. The firmware can be loaded from removable media, such as a USB stick or floppy.
The missing firmware are: iwlwifi-5000-5.ucode iwlwifi-5000-4.ucode iwlwifi-5000-3.ucode iwlwifi-5000-2.ucode iwlwifi-5000-1.ucode If you have such media available now, insert it, and continue.
View 2 Replies
ADVERTISEMENT
May 22, 2010
I have just installed Squeeze on my laptop.
During the first part of the install i was presented with a list of firmware that was needed, 6 iwlwifi items. I was able to install 5 from the one .deb package however one was missing;
iwlwifi-6050-4.ucode and this one is very hard to find.
Can anyone tell me where it is to be found?
View 7 Replies
View Related
Mar 18, 2016
Installed Debian Live 8.3.0 on my laptop .... To my surprise It did not find my Intel Pro Wifi adapter.......IWLWIFI
I needed to download the IWLWIFI package, however to my second surprise synaptic did not have it! So manually went into a repo, found it , and installed it with DPKG.
According to WIKI [URL] ....
"As the iwlwifi module is automatically loaded for supported devices, reinsert this module to access installed firmware:
# modprobe -r iwlwifi ; modprobe iwlwifi"
To my third surprise , modprobe command not found. After doing some investigation, I discovered that all these commands:
lsmod(8), rmmod(8), insmod(8), modinfo(8), modprobe(8), depmod(8)
have been removed and replaced by KMOD
KMOD is not a very friendly, it's kmod -- support is useless, so looked for it's manpage : [URL] ....
To my fourth surprise, there was not much support either:
KMOD(8) kmod KMOD(8)
NAME top
kmod - Program to manage Linux Kernel modules
SYNOPSIS top
kmod [OPTIONS...] [COMMAND] [COMMAND_OPTIONS...]
DESCRIPTION top
[Code] ....
HTML rendering created 2016-03-15 by Michael Kerrisk, author of The Linux Programming Interface,
So far I am very disappointed with this latest DEBIAN 8.3.0 edition
--no driver included for a very common IWLWIFI (used by 13 adapters)
--utilities to add drivers removed ( lsmod(8), rmmod(8), insmod(8), modinfo(8), modprobe(8), depmod(8))
--the so called "replacement" KMOD is poorly documented and totally useless
View 6 Replies
View Related
Mar 19, 2016
I'm a new Debian user but I've been around Linux for awhile. I wanted to try Debian because I wanted something stable and that I could set up myself from a minimal install. However, I'm having issues with my WiFi connection. I'm running KDE and connected to the network, but I can't access any webpages or ping, for example, google.com. I know the network is working because I'm connected to it on my phone and my wife's Macbook. Here's the output of lspci:
Code: Select all00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
[Code] ....
Here's the output of lsusb:
Code: Select allBus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 05ca:18ff Ricoh Co., Ltd
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code] ....
I'm using jessie. So far I've tried using firmware-iwlwifi from backports and installing kernel 4.3.0 from the stable repos.
View 4 Replies
View Related
Oct 1, 2010
I've installed firmware-iwlwifi I've modprobe -r'd and modprobed the iwlagn module I CAN scan, using iwlist wlan0 scanning, and I can see my essid, hovering in the distance. it is definitely broadcasting.
I use wicd and wicd-curses. No wireless show up in wicd-curses. ifup wlan0 gives me no dhcp offers received and slumbers again. from iwconfig:
wlan0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
from lspci:
03:00.0 Network controller: Intel Corporation WiFi Link 5100
View 11 Replies
View Related
Jul 14, 2015
I installed linux-image-4.1.0-trunk, when I boot into the kernel there's no wireless available. Dmesg indicates seems like the firmware is loaded, although firmware-iwlwifi is installed:
...
[ 11.047031] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-7265D-13.ucode (-2)
[ 11.047039] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-13.ucode failed with error -2
View 5 Replies
View Related
Sep 5, 2010
m using redhat 5.3 i have installed a driver for wifi as per my wireless card... i checkd my kernel version , nd it is as per the requirements... but i hve a file name iwl3945.ucode how to install the driver using this file...?
View 3 Replies
View Related
Jul 17, 2010
Have been using Ubuntu Desktop Amd64 for 6months, on a dual boot alongside Vista64. Since first installing the OS, I have switched over to Ubuntu & use Windows only for heavy multimedia edition & the occasional gaming.I just bought a netbook and installed Ubuntu 10.04 LTS NBR. Works great, except for wlan. No propriety drivers available for my Intel Wifi Link 1000BGN.
I've spent hours trying to install iwlwifi, but the process is somewhat complicted for a noob such as myself.After much reading and trying, I've managed to download and install iwlwifi-1000-ucode-128.50.3.1.tgz, (following the http://intellinuxwireless.org/?p=iwl...=howto-iwlwifi instructions)and am now working on installing the mac80211 subsystem (following the http://intellinuxwireless.org/?p=mac...howto-mac80211 instructions)When running
Code:
% wget
intellinuxwireless.org/mac80211/downloads/mac80211-10.0.4.tgz[/url]
[code]....
View 2 Replies
View Related
Apr 27, 2010
how to run benq scanner 5000 and web cam im ubuntu
View 1 Replies
View Related
Dec 21, 2010
my boss wanna to built an Server Environment can be load about 5000's ppl online in the same time now there r have one server: Inter Xeon E5504 2.00GHZ 8GB memory , if i used apache system is redhat, how many can it loads.
View 1 Replies
View Related
Feb 10, 2010
I just bought a new ASUS laptop with the Mobility Radeon HD 5470 card.It seems like there's no driver for it yet (the amd.com download wizard is a dead end because I only find the HD 4000 series).
Is there anything I can do to get support for this card? At least I'd like to be able to change resolution. Or do I simply have to wait for a new ATI driver?
View 3 Replies
View Related
Oct 11, 2010
So Ubuntu had been working great in Lucid, and when I upgraded to Maverick the support for my graphics card stopped. It has the proper driver ("ATI/AMD Proprietary FGLRX graphics driver") active and fglrx, fglrx-amdccle and fglrx-modaliases are all at 2:8.780-0ubuntu2. I also have the xorg radeon package installed. Yet, whenever I try to enable desktop effects (to get compiz to work) it says that Desktop effects could not be enabled.
View 3 Replies
View Related
Feb 20, 2011
I am pretty new to Ubuntu 10.10 and have been unable to successfully print to a HP Designjet 5000 42inch non Postscript printer that uses hpgl/2. I have installed other types of printers with no problem but this one has me beat so far. I will primarily want to print banners from Inkscape that will average 3 x 12 feet in size, and at least 150 dpi, so will need to be able to define custom size sheets. Currently I develop a project in Inkscape then print to file as a pdf, open the pdf from a windows xp machine on the same network with Adobe Reader and print to the Designjet from Adobe. This worked fine until I upgraded Adobe Reader to 10.01, it won't print very large files to the Designjet, iether. It would be very nice if I could print directly from Inkscape in Ubuntu to the Designjet printer. I do not print from Inkscape in Windows XP because the large files put both the program and operation system into a permanent non responsive state if they do not crash outright. I am able to print large files on the XP machine from Corel Draw 12 with no problem, but have not been able to get Corel Draw to accept any of the svg files that Inkscape produces.
View 1 Replies
View Related
Mar 10, 2011
logitech webcam pro5000 which does not work with my computer, the webcam does not work even if i plug it to different ports,especially when am using "skype linux beta",i tried searching for forums and threads and even videos but it seems my weak mind cannot absorb the technical explanations on the said sites,
View 1 Replies
View Related
Apr 21, 2010
In vlc, cheese I'm getting only this resolution.
[ 464.100250] uvcvideo: Adding mapping Brightness to control 00000000-0000-0000-0000-000000000101/2.
[ 464.100262] uvcvideo: Adding mapping Contrast to control 00000000-0000-0000-0000-000000000101/3.
[ 464.100270] uvcvideo: Adding mapping Hue to control 00000000-0000-0000-0000-000000000101/6.
[ 464.100279] uvcvideo: Adding mapping Saturation to control 00000000-0000-0000-0000-000000000101/7.
[ 464.100287] uvcvideo: Adding mapping Sharpness to control 00000000-0000-0000-0000-000000000101/8.
[ 464.100295] uvcvideo: Adding mapping Gamma to control 00000000-0000-0000-0000-000000000101/9.
[ 464.100304] uvcvideo: Adding mapping Backlight Compensation to control
[Code]...
Somewhy it is using YUY, but not MJPEG, although seems MJPEG can give larger resolution. How to get it? Single shot 1,3MPix technically possible, any way to do that?
View 2 Replies
View Related
Jan 8, 2010
My scanner is Benq 5000 ,the default scanning software (xsane) give me the following message whenever I plug the scanner to the pc :
Failed to Open Device 'Snapscan:libusb:005:002' Invalid Argument.
I tried the gnome image scanning software too but it didn't recognize the scanner at all. The only software that worked is vuescan but unfortunately it is non-free software !!!!
View 4 Replies
View Related
Feb 20, 2010
I can't get my wireless card to work. I downloaded a broadcom driver for it and i do believe its the right one, but its not helped. I'm running mint 8. The information on my internal wireless card i got using the terminal is:
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
[Code]....
View 2 Replies
View Related
Oct 10, 2010
So Ubuntu had been working great in Lucid, and when I upgraded to Maverick the support for my graphics card stopped. It has the proper driver ("ATI/AMD Proprietary FGLRX graphics driver") active and fglrx, fglrx-amdccle and fglrx-modaliases are all at 2:8.780-0ubuntu2. I also have the xorg radeon package installed. Yet, whenever I try to enable desktop effects (to get compiz to work) it says that Desktop effects could not be enabled.
View 4 Replies
View Related
Apr 25, 2010
I'm having trouble getting X to work after switching from onboard intel video to a 5000 series ATI card. Apparently I need to switch to a MESA or fglrx driver. I did a sudo apt-get install fglrx-driver and it installed but still no X. I'm currently using Karmic. I've tried to boot with a live CD which works fine and changed the xorg file manual but that was a mess.
When I start I get a checking battery state ... done and it stays there forever sometimes and sometimes I can login but without x. Typing startx gives me a long list that says check the xorg website. I've been looking around for a way to fix this and haven't been able to get it working.
View 6 Replies
View Related
Feb 17, 2010
I have a new system with an ati mobility radeon hd 5730 chip. As far as I know, there are new drivers in the works, but aside from some articles, I haven't found anything that specifically tells me how to get them installed/working (at least, so that it works for the 5000 series of radeon chips).Has anyone had any luck with this yet? I'm just at the stage of installing, so I don't really care if it involves a different distro, etc. I've tried Ubuntu 9.10 and 10.04-alpha2, as well as Fedora 12 (from the live CD) and so far no luck.At the moment, all I care about is getting the native 1600x800 working for my screen. I haven't a clue how do do that...it seems like I might be able to do this using xrandr, but I don't know how to create a mode properly.
View 6 Replies
View Related
Feb 19, 2010
I need to flash my BIOS to get rid of an error: "Intel uCode loading error". On [URL] I have found a tutorial, that looks to be fine. I can even see in the comments, that somebody have done this with success from Ubuntu 9.04, the very same system, that I use. Nevertheless I cannot make this bootCD with my Ubuntu 9.04, as it doesn't know the loop option to mount the image.
In the tutorial it says: "Requirements for this step is that you have support for the vfat and loop file systems in the kernel. Or you can have those features compiled as modules. In the latter case you can load the modules before the next step, like this:
modprobe vfat
modprobe loop"
loop doesn't seem to be present in my system, and the command modprobe loop returns an error that the module is not available. I tried to follow the tutorial anyway, but with no success. How can I get the module lopp? I also want to use it to make iso images bootsble from the harddisk.
View 2 Replies
View Related
Aug 31, 2010
I tried installing Ubuntu on an old Presario I had hidden in the closet.After the install I try to boot up the OS. Prior to getting to the login screen I see a series of messages. One message is an error. The error tells me that I must update BIOS (can not from the Compaq site or anywhere else for the matter) or use the command:
Code:
force=1
I tried finding information on how to implement that but to my dismay I could not find any answers. how I would be able to utilize this command and override this BIOS problem so i can fully use Ubuntu 10.04 on this old dinosaur?
View 2 Replies
View Related
May 13, 2010
have you ever used microsoft bluetooth mouse 5000? can you tell me how to configure it in linux or if it is at all useable in linux?
View 1 Replies
View Related
Mar 3, 2010
I am having a strange problem with the Opensuse 11.2 Xorg server. Graphics hardware is Nvidia Quadro FX-5000, driver is ver 190.53. 90% of the time, I am getting a seg violation from the Xserver on trying to login via kdm:
[Code]...
...is the error that is present in the "kdm.log" file. So far, it doesn't seem to be user dependent (happens either as root or joe random user,) Again, so far, it only seems to happen with "driver nvidia" enabled in the config file, not with "driver nv" The failure occurs shortly after hitting return on the login screen. After it fails, it starts up a new Xserver, and presents a new login screen. Repeated attempts seem to *eventually* succeed, but 90% of the time, it fails I strongly suspect the Nvidia driver, but I have not been able to find anything documenting any similar problems.
View 1 Replies
View Related
Apr 5, 2011
I have just installed Ubuntu (/dev/sda7) and Debian (/dev/sda4), but since I have updated all informations on Ubuntu, then Debian did not appear anymore on the grub list. There is an wiki I have found, but I an not really sure about what to do.
Here are the boot informations:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks at sector 488861020
of the same hard drive for core.img, core.img is at this location on
/dev/sda and looks on partition #3 for (,gpt3)/grub.
[Code]...
ps: on this file, it says that the /boot is installed on the MBR and /dev/sda3. I will remove the boot from MBR as I am now using /dev/sda3 instead. Sorry for my english
View 7 Replies
View Related
Jul 17, 2009
I know of 3 at least so far Sidux and GRML and DRBL are there any others that are based on stabel or sid? or what? frugal as in like puppy, tinycore, dsl, etc nomadic like, usb, hd, etc?
View 14 Replies
View Related
Jun 1, 2010
Is it exactly the same? I saw 5'th smoothing and 6'th smoothing. For me - no difference at all. Does anyone have precise technical information?
View 1 Replies
View Related
Jul 7, 2011
I have a Windows domain with a proxy. I have an account that can use the proxy and the URL that points to the proxy.pac file. this might seem a stupid question but can anyone tell me how do I enter the username and password for my test Windows account so that Debian can authenticate it?
View 1 Replies
View Related
Mar 6, 2010
I had (and still do) a working dual-boot XP/Karmic (GRUB version 1.97 beta4). I shrank the Ubuntu partition and set up partitions and installed Debian 5.04. When I got to the point of installing GRUB, I told Debian to install grub to MBR. On rebooting, Ubuntu was not an option on the NEW (looked different) grub menu.Maybe it was GRUB2? Could boot to either XP or Debian though.
Thought easiest thing was to reinstall Ubuntu since it seems to "see" other OS's more reliably. So I did, and installed GRUB again during its install to MBR. Then, all three were in the GRUB menu (version 1.97 beta4 again), but when tried booting to Debian, got an error (forget the wording), but think it was because the partitions got renumbered when installing Ubuntu.
SO, reinstalled Debian, reformatting the partitions but not deleting them first so the numbering stayed the same. When got to the part for installing GRUB, I told it to skip (I got some kind of error that said "Install failed. This is a fatal error. You will have to boot with an external device..."), hoping now the current GRUB would work.
Now, all three were on the GRUB menu, but when I tried to boot Debian, I got "no such device" and a list of numbers/letters after it. And "press any key to continue", which takes you back to the GRUB menu (version 1.97 beta4, by the way).
O.K., did sudo update-grub in ubuntu and rebooted. Now, Debian 5.04 shows as last entry in GRUB, and choosing it starts a boot, which hangs at "Begin: Waiting for root file system....".
Waiting long enough at the "Waiting for root file system..." hang results in a series of notifications:
WARNING bootdevice may be renamed. Try root=dev/hda3
Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
-Check rootdelay= (did the system wait long enough?)
-Check root= (did the sytem wait for the right device?)
-Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sda3 does not exist. Dropping to a shell!
In Gparted, the partition with Debian root is hdc3, although on the GRUB menu it's listed as /dev/sda3. However, in Gparted the Windows partition is hdc1 and on GRUB it's /dev/sda1, and it boots fine.....
Is my Debian install just borked? Did telling it to skip installing a bootloader (I got some kind of error that said "Install failed. This is a fatal error. You will have to boot with an external device..." ruin it?
If skipping the bootloader install did ruin it, how do you install Debian without borking your current GRUB? That's what happened the first time.
View 5 Replies
View Related
Feb 10, 2011
I have used Debian Linux for two years, most recently the seventh or so iteration of Version 5. I use the Gnome desktop and the Synaptic Package Manager, not the Update Manager, for updates because it's easier to build a log with the former.In my most recent update, Synaptic stripped out all the xserver-xorg files�47 in all. I thought it peculiar but did not know enough to interfere. When I rebooted, the system told me I must install xserver or correct GDM configuration and restart.
Have I been hacked? Am I being tested by the Linux Illuminati? Or does it have something to do with the warning message I received at the end of the update-upgrade, attached? And how do I go about reinstalling xserver? With Aptitude? I have tried running apt-get -f install, to no effect.
View 4 Replies
View Related
