This is probably a very basic question related to running and X11 application on a remote machine.I connect from a linux machine to another by ssh -X remote.machineAfter that all X11 applications work fine. But after a while (~ 20 minutes), I can no longer run the applications. I get a message like containing "cannot connect to X server localhost:10.0".My host machine has in /etc/ssh/ssh_config "ForwardX11 yes".Is there anyway to connect to a remote machine with a permanent X11 session?
This is probably a very basic question related to running and X11 application on a remote machine.
I connect from a linux machine to another by ssh -X remote.machine
After that all X11 applications work fine. But after a while (~ 20 minutes), I can no longer run the applications. I get a message like containing "cannot connect to X server localhost:10.0".
My host machine has in /etc/ssh/ssh_config "ForwardX11 yes".
Is there anyway to connect to a remote machine with a permanent X11 session?
I am trying to run VNC server on a standard OpenSUSE 11.2 Gnome Desktop installation.I have done this succesfully with SLES for sometime, however, my experience with OpenSUSE 11.2 is that it doesn't work out of the box!!
I am using XP Pro VNC viewer Free Edition 4.1.2 to connect.
I have removed "localhost" from the # special IPv6 addresses in hosts. This fixes the black screen issue for me. All appears well until I disconnect and retry the connection after 5 minutes or so. Then VNC client makes the connection and then immediately disconnects. It's a no go from then on. If I reboot OpenSUSE 11.2 it works again but then reconnect fails again after the same period of time.
I am trying NX now as an alternative. However, I would much prefer to use VNC.
My remote "NX Client" disconnects after 60' when server goes to sleep, leaving my session suspended. My server is running Ubuntu 10.10 Desktop Edition, Power Management is configured to sleep after 60'I need the server to go to sleep if nobody's using it. I don't need the server to go to sleep in case:media is being streamedremote connections are in useHow to configure my system to look further than just keyboard and mouse activity before initiating sleep?PS: Media streaming can be DAAP/RhythmBox; DLNA/MediaTomb; SLIMP3/Squeezebox serverRemote connections can be SSH/PuTTY; SSH/NX Client
I have an Ubuntu 11.04 Server set up for my small office whose sole job is to run as a samba file server. The problem is that it randomly hangs. For example, I can connect the clients just fine, however if left idle it tends to take a few moments to work when you try to go back into the shared folder or drive. The client will behave like it is disconnected and is trying to search for the drive only to a few moments later, go right back to normal behavior.
If I ping this server while this is happening my requests will time out for a little while and then just start working. The same thing happens when I try to connect with Putty or through WebMin. One second its unreachable then the next its fine.I have already tried swapping out patch cables (which actually seemed to work for about 2 weeks) and I have patched it to an alternate port on the switch. The only thing I have not done at this time is to change the NIC.All the clients are running Win7 with the exception of two XP machines.Simply put, its like the machine just goes dormant for a while until you ping at it for a while to wake it back up.
I have installed a linux server in my office to run 16 machines. Its main use will be a internal mail server but will be also running websites.
I have installed Ubuntu 9.10 server x64 and have got apache running.
I am looking for the simplest more robust solution for smtp, pop3 and imap. I have only ever used qmail before and found it a pain to configure and its getting old so I though I should probably try something new. I have not much experience with running pop3 or imap on linux so would love a suggestion on that.
have to create a webhost on an running fedora server which runs multiple webpages + a coldfusion serveri have to add an coldfusion virtual host to these.what i would do:*crate a new user & group*enter vhosts.conf and copy an existing host and modify it for the new one.*create an new folder and copy the main files (phpstarter and webroot) *chown the files for the right useri think an apache graceful would be needet
Right now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?
i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB
if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..
I'm running a linux cloud server with the following config 1.2ghz Processor allocation 752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
iam trying to sync file server data into backup server machine by command- rsync -avu path/of/data ipaddress-of-backup-server:/path/where/to/save after running it ask for root password and manually it is successful.but i want to make it automatic.for that i also tried cronjob and also generated authentication key but iam not successful in login automatically..anybody know how to authenticate root to login for storing data in backup server.
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
I have got a running mail server on CentOS5.4 Final using Zimbra free edition. . Assume that domain is organization.com.local And it is running fine with users created and bugzilla running on the same machine can send mails using this server. But it can obviously send messages to the internal users. There is this option to configure it to use external mail server to send mails outside the network but my external smtp server needs an authentication.Is it possible to configure it this way to use my external server to send mails from internal domain to say gmail?
i recently installed apache2 mysql php exc. to run a realtime stat site for my servers.the only thing is that the buttons/ images are not showing up.i checked that my GD was up to date and installed perl5 GD. dont know what else to check.my site with problems go to:http://24.20.177.228/stats_public
I am working on linux server with below specifications.Linux EDT 2008 i686 i686 i386 GNU/LinuxWhile checking the status of the server using the command 'opmnctl status' and when server is down the output is not getting redirected to file.I m using the command as,opmnctl status > abc.txt.
i have been trying to complete the following project1) Configure a FTP server where we can upload and download files.........2) server must run at 9 pm & stop at 9 am automatically ............although the first task was easy ,i have no idea how to accomplish the 2nd task(not to mention I'm a new user)
I've two internet based server ( xx.xx.xx.xx and yy.yy.yy.yy ) The Y server is running VNC server and is responsible for answering to VNC sessions. But I need to hide the IP of Y server so I want X server to be as VNC Proxy and redirect all VNC sessions to Y server.
I guess the best way is to use iptables but actually I can't get it working so
I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
i am trying to send malformed string into ability ftp server in order to have some unexpected crashes. i login in into the ability ftp server on my window 7.On my virtual machine,i am working on a backtrack 4, i tried to send some string to have some unexpected crashes, but i couldn't success.here is the code:
I have installed the Apache, PHP and MYSQL in the rackspace cloud server environment. Can anyone please guide me How can I configure email server in that with postfix or some other with multiple domain.
how do i able to allow some users that are able to create content in directory of http server. For example: i have configured a web server which have default document root /var/www/html, now i want to extend my web server through virtual hosting , i have enable virtual hosting, but i want that user sumit is able to create content in /var/www/html/secret. which is the document root for my virtual site?
I installed IBSng in ubuntu-server .but i can not start this server :Code:[root@myserver]# /etc/init.d/IBSng start.: 8: Can't open /etc/rc.d/init.d/functions"functions" file is in RPM base system . and ubuntu have not this file
I have succesfully installed Postfix mail server in my linux machine(using RHEL 5) but unable to communicate through mails from my linux machine to my windows machine(Windows2003 server). What are the possible configuration steps that i need to configure on my windows machine
I did a basic installation of Debian, which will be used for a mail server. I Installed the bind9 and did the configuration of the zones and created the files in the directory / etc / bind. After the process I typed the following command to test my DNS:
nslookup mail.hotelpart.com and presented the following error:
Easier to stay I put my files in message: The files named.conf, db.hotelpart.com and db.111.20.11.200.
I have been working on NTP to find out resolution of my issues unable to find. let me briefly explain here. I have three servers and no server is fully synced with remote NTP server.I don't know why it sync time alternatively with remote NTP server and LOCAL whereas there is not issue in connectivity/reachability of NTP server and NTP clients. Also server 1 reporting kernel time sync disabled 0001.
I've seen how to do this from native linux native server to linux native server. Not a problem. My question has to do with ssh/scp exchange of key exchange between a windows cygwin server and a linux server.There seems to be no /home/root/.. to hold the key exchange files. I've tried this between a cygwin server with a /home/administrator/..subdirectory and the /root subdirectory on the linux server. Is this how I should do this?Someone else set this up between these two servers earlier but forgot to document how it was done in his notes.I don't want to break the existing systems by setting up the key generation incorrectly on the functioning pair's of servers.
I know little if anything about svn, so need your assistance. I have a linux server running svn. I have a Windows server running svn. First, I'm looking for a way to copy an svn repository from the linux server to a new Windows server repository. I've looked for how to do this on the Internet and within the Apache.org website(which is now the maintainer of SVN).
I haven't found anything on a very granuler way to copy a repository from one O/S to another other than folks say it can be done. Not how.
Second, is there a way to automatically do this on a regular basis? I see the manual process of svnadmin dump and svnload. Also there is a manual process of svnadmin hotcopy.
