This is probably a very basic question related to running and X11 application on a remote machine.
I connect from a linux machine to another by ssh -X remote.machine
After that all X11 applications work fine. But after a while (~ 20 minutes), I can no longer run the applications. I get a message like containing "cannot connect to X server localhost:10.0".
My host machine has in /etc/ssh/ssh_config "ForwardX11 yes".
Is there anyway to connect to a remote machine with a permanent X11 session?
I am trying to run VNC server on a standard OpenSUSE 11.2 Gnome Desktop installation.I have done this succesfully with SLES for sometime, however, my experience with OpenSUSE 11.2 is that it doesn't work out of the box!!
I am using XP Pro VNC viewer Free Edition 4.1.2 to connect.
I have removed "localhost" from the # special IPv6 addresses in hosts. This fixes the black screen issue for me. All appears well until I disconnect and retry the connection after 5 minutes or so. Then VNC client makes the connection and then immediately disconnects. It's a no go from then on. If I reboot OpenSUSE 11.2 it works again but then reconnect fails again after the same period of time.
I am trying NX now as an alternative. However, I would much prefer to use VNC.
My remote "NX Client" disconnects after 60' when server goes to sleep, leaving my session suspended. My server is running Ubuntu 10.10 Desktop Edition, Power Management is configured to sleep after 60'I need the server to go to sleep if nobody's using it. I don't need the server to go to sleep in case:media is being streamedremote connections are in useHow to configure my system to look further than just keyboard and mouse activity before initiating sleep?PS: Media streaming can be DAAP/RhythmBox; DLNA/MediaTomb; SLIMP3/Squeezebox serverRemote connections can be SSH/PuTTY; SSH/NX Client
I have an Ubuntu 11.04 Server set up for my small office whose sole job is to run as a samba file server. The problem is that it randomly hangs. For example, I can connect the clients just fine, however if left idle it tends to take a few moments to work when you try to go back into the shared folder or drive. The client will behave like it is disconnected and is trying to search for the drive only to a few moments later, go right back to normal behavior.
If I ping this server while this is happening my requests will time out for a little while and then just start working. The same thing happens when I try to connect with Putty or through WebMin. One second its unreachable then the next its fine.I have already tried swapping out patch cables (which actually seemed to work for about 2 weeks) and I have patched it to an alternate port on the switch. The only thing I have not done at this time is to change the NIC.All the clients are running Win7 with the exception of two XP machines.Simply put, its like the machine just goes dormant for a while until you ping at it for a while to wake it back up.
I'm currently using Fedora 13 x64 and have noticed a strange problem with my wireless.
At random intervals it will disconnect, be it 5 minutes or 3 hours and then it will not re-auth no matter how long I leave it. The wireless is running WPA/WPA2, With TKIP/AES encryption. The router only supports b/g and the Wireless NIC is only b/g.
Not sure what driver/software it is using. I noticed I do have wpa_supplicant installed but there doesnt seems to be much happening in /etc/wpa_supplicant/wpa_supplicant.conf apart from the below.
Code: [daniel@Enterprise ~]$ su -c 'cat /etc/wpa_supplicant/wpa_supplicant.conf' Password: ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=wheel
This is probably a very basic question related to running and X11 application on a remote machine.I connect from a linux machine to another by ssh -X remote.machineAfter that all X11 applications work fine. But after a while (~ 20 minutes), I can no longer run the applications. I get a message like containing "cannot connect to X server localhost:10.0".My host machine has in /etc/ssh/ssh_config "ForwardX11 yes".Is there anyway to connect to a remote machine with a permanent X11 session?
I am trying to configure pppd to connect to a 3G network (Sprint, in this case) and then stay connected, reconnecting automatically if the remote connection is terminated. I have enabled the persist option. My configuration file is as follows:
I've asked this question more or less before on stackoverflow and believed it to be solved (hence accepted the answer) but it turns out it wasnt solved.In simple terms, I've written a python script which just outputs text constantly to stdout, thats all it does 24/7. I've linked it to this xinetd file
I have a fresh installation on ubuntu 10.10. And I installed b43-fwcutter, but after a while it disconnects. So then i disable wireless and enable it again and it works, why is this happening??n How can I stop it?
After I updated to kernel-2.6.27.9-159.fc10 a couple of weeks ago, my wireless kept dropping the connection every few minutes (using an intel 3945 with the kernel iwl driver), particularly if secured with WPA. Updating to the 2.6.27.12-170.2.5.fc10 kernel currently in updates-testing has solved the problem.
I'm running openSUSE 11.1, with KDE 4.3.00. My Kopete, version 0.70.90, disconnects and reconnects to my jabber server several times a minute.
The jabber server, running the latest version of Openfire, is on the same gigabit subnet as the openSUSE machine in question. I can successfully connect to other IM services (MSN, Yahoo, etc) with no trouble. I also have no trouble with any other network service, from NFS to IMAP. I have other (Windows / Miranda IM) clients connecting to this same jabber server, all without trouble.
It drives me nuts, and it drives everyone else on my buddy list nuts too, as they see constant offline/online notifications for my user.
I'm not sure if this started with the 2.6.34.4 or 2.6.34.7 update, but one of those.At random intervals the USB subsystem disconnects. When that happens the monitor screen goes black (no input signal) and then returns 1 - 2 seconds later. This was happening every once every 1 - 2 days; today the count is 10 times. It's gotten really annoying.There is a topic about USB mouse and keyboard becoming unavailable due to recent kernel updates. That is not the issue here; I have tried disabling USB auto-suspend with no observable change in behavior.Or could it be that I have a defective mouse?
It's a bit unnerving.The monitor suddenly goes black, the keyboard resets, the mouse resets. And after about 2 - 3 seconds all is back to normal.My USB setup is a bit complicated (mostly because I could). A 7 port hub is connected to a USB port on the computer. Among other things, the 7 port hub is connected to a four port hub on the monitor (Viewsonic). The mouse is connected to the 4 port hub. The PS1 keyboard is connected to the PS1-to-USB convertor which is connected to the 4 port hub.
I've seen a problem staying connected to a Cisco VPN, this goes back a number of years.I was running 8.10 and it was fine.After I moved to 9.10, the problem started happening.My VPN connection to work would drop after 8 hours.I looked around for a while and ended up compiling the cisco provided client which works fine (but is a pain).I've been running 9.10 on my work laptop, and it experiences the same problem using vpnc, but I've been dealing with it because it's easier than using the Cisco client.
I installed 10.04 on my work desktop, my home desktop, and a personal laptop that was previously running 8.10, and all experience the same problem with vpnc.I even go so far as to keep one terminal open with a constant ping all day and it still drops after about 8 hours. A couple of others at work experience the same problem using vpnc. This is not a problem using the Cisco provided client, or running it on windows or os/x.Has anybody else seen this, or have any ideas on what I can start looking for to get this addressed?
I have installed Debian Wheezy on my laptop today, which went relativly smoothly. The only problem that is left (for now) is that my wireless LAN disconnects 1-2 times every 30 minutes, just to reconnect a few seconds later. Obviously that is very annoying, especially when watching streams on twitch, videos on youtube and so on.A thread I found on google suggested to use the command dmesg right after my wireless lan connection drops. So I waited for the next disconnect, issued the command and got the following output:
Code: Select allwlan0: deauthenticated from 00:1f:3f:d4:25:6a (Reason: 14) wlan0: deauthenticating from 00:1f:3f:d4:25:6a by local choice (reason=14)
I wondered what that reason code meant and found this website, which states that the code 14 stands for: Message integrity code (MIC) failure
This is the first one of probably many posts as I am new to Fedora having lots of questions. This one is about the openvpn client which is used by me to connect to my company network. Thanks to the Fedora FAQ it was easy for me to set up the client and establish a connection. There is just one problem every time I open a connection I am disconnected from my local Internet. I was using openvpn on my Windows XP PC before and there was no problem keeping two Network connections, the (W)LAN and the vpn tunnel. Does anyone know how to solve this? I am utilizing the latest Fedora 11 release and configured openvpn client via the Network Manager GUI.
I am on Fedora 12.I have a USB bluetooth dongle and a bluetooth headset.The dongle gets recognised fine and I can pair the headset as well. PulseAudio sees the input and output of the headnet perfectly. It also runs perfectly for about one minute, and then the headset is disconnected. Why?During the sixty seconds where everything works, I also hear a beep (about every 20 seconds).After disconnecting I have to put the headset back into pairing mode and then remake the connection. And then everything works for another minute, and then the headset is disconnected again. Why
as the title says , when iam downloading anything from anywhere ,, even when iam updating , i cant use anything else on internet ,,, no chat , not even browsing ,
While in Internet my connection seem to be off after some time when I stop browsing. I connect via DSL modem and I turned off network manager control over my DSL connection. I set up my connection on boot. Where can I fix it? Or where can I see the conf files for network connection setup?
My bluetooth devices disconnect after a period of inactivity (not sure exactly how long). They're being connected with: sudo hidd --connect And I've made no edits to any bluetooth related system files so it should be default settings throughout. I would like them to stay connected indefinitely and it would be even better if they would stay connected through reboots.
I'm currently using Pidgin 2.6.2 on Karmic. Status changes work fine if I change it in Pidgin, but if I use the user switching applet to change my status is consistently disconnects my connection to Windows Live (but not AIM or GTalk), claiming that I have "signed on from another location". A quick Google and forums search turned up nothing.
I've posted about this previously, but I am unable to find that post...
I have a separate partition: 'files'.
This has the mount point of: '/files'.
My /home/johnathan folder is a symbolic link to: /files/installed/backup/johnathan
So when this particular mount point '/files' is not available I get errors stating ICEAuthority and that /Desktop and /.nautilus can not be created.
If I log in as root, I can not mount the drive using System > Administration > Disk Utility
I get the error that '/files' can not be mounted because it is un use.
Sometimes, if I wait a while while logged in a root it will 'magically' mount and work again... then I can login as my profile.
I love Ubuntu that it keeps all of your settings and program settings within the profile. So, if I have to reformat or reinstall Ubuntu I simply recreate the symbolic link to /files/installed/backup/johnathan and all of my settings are back. All that is left is to reinstall my apps and I am back to where I was before reinstalling.
So, how can I correct this? I do have two other partitions that have mount points, but they do NOT do this like '/files' does.
I've even replaced the UUID in '/etc/fstab' with the path tot he partition: '/dev/sda2'. This also didn't work.
My internet disconnect mabe every second hour and I have to restart the Ubuntu to get internet again. This started to happen when I bought a new wireless card called NETGEAR WG311v3. The live CD didnt have the drivers for it so I had to download XP drivers and install it with ndisrwapper.
So my question is how do I fix it? Do other network drivers crash with my current one? If so how can I see wish one to remove?
Note that my card works fine with XP on same computer.
This is going to sound weird but my wifi interconnection is really good i never have any problems but when i open skype, go to options and click test webcam my wifi disconnects and will not return till i restart the pc
I'm running 10.04
keep the connection and the webcam working will be great
I'm using Ubuntu Server 10.04 and I'm also using OpenSSH 5.3. I have SFTP-only users in a chrooted environment. Users are able to login, change directories, upload and download files, but as soon they attempt to give the 'ls' or any list directory. the server disconnects.
Got a problem when I try to stream stuff off the net, such as watching ....., or listening to music clips.Basically, the internet just simply disconnects after a few seconds, or a minute at most after starting to stream - although it appears to be connected in the wireless icon thingymigig in the top right taskbar, eventually that goes though and says I'm disconnected.
While browsing normally, and using the net normally with messenger and looking throughwebsites,uploading/downloading via ftp, with no videos or music streaming, the net stays on - no problems.If I try to stream stuff from another computer running windoze 7, then these problems dont occur, the net doesn't disconnect and can stream till the end of time (or so it seems).Why does this happen just on the Linux machine?
I have loaded ubuntu Lynx 10.04.1 as a dual boot behind XP home. I have wireless connection to the XP os via netgear wireless G router and USB 2.0 adapter. The network connection works well with the XP side. When I boot into ubuntu I am sure I have configured the network properly with the wep key and password and the network signal is alive in the work bar at the top of the screen. When I open Firefox and try to browse to ,say, ebay it asks for the passphrase again then tells me that FF is in work offline mode. When I correct this I get asked for the pass phrase again and the connection is disengaged. It just keeps asking for the passphrase and disconnecting. When I reboot into XP everything works perfectly again.
I have two machines one Ubuntu Lucid and one Kubuntu Lucid. They share a bluetooth keyboard through a KVM switch. As of last week both were working. At this point my KDE machine disconnects from the keyboard on the first keystroke. The Ubuntu machine is still okay. What I've tried/checked so far without success
I can connect my keyboard through Kbluetooth but it disconnects when I start typing. The timeout time is set to none. I tried rebooting and then reinstalling the software to no avail. I replaced the batteries in the keyboard. Plugging the bluetooth usb adapter directly into the KDE box. Removing and then adding the trust I find this in the syslog:
2010-09-18 12:09:42 godel bluetoothd[1911] link_key_request (sba=00:1BC:0F:F1:E7, dba=00:22:48:87:B3:49) 2010-09-18 12:09:42 godel bluetoothd[1911] Encryption failed: Permission denied(0x5) Here's the kbluetoothrc from my home folder [KBlueLock]
I'm using an Acer Aspire One d250 running Netubuntu 10.04. The wireless connection to my router fails at random intervals and spends most of it's time trying to reconnect. It will occasionally ask me to input the password to the network, which is already entered in the dialog box, and clicking "connect" doesn't seem to make any difference. Also, when it is disconnected from the network, none of the other computers in the house, wired or wireless, are having any problems. If there is any more information I could provide,
