My server is using MySQl mysql-5.0.77-3.el5 on Centos 5.4.When I check mysql log at /var/log/mysqld.log,it displays warning Quote:
100524 11:46:21 mysqld started
100524 11:46:21 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295
100524 11:46:21 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295
[code]....
After the upgrade from 8.10 to 9.04, all was well. But after the upgrade from 9.04 to 9.10, I lost the MySQL server. Now, I recall during the upgrade, I was asked if I wanted to keep the existing my.cnf file or replace it with a newer one. I did as suggested and kept the original as I had edited it before. The same question was asked with a couple other config files. I kept the original in each case. After the first step, I checked the server was running and the websites were up, all was well. After the update to 9.10, when I checked the server, I get the following error:
Code: error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! Can anyone point me in the right direction to getting this resolved?
i have successfully installed mysql server but when i am try to create database, it shows error like this
ERROR 2002 (HY000): Can't connect to local MySql server through socket '/var/run/mysqld/mysqld.sock' (2)
** mysqld is not available in /var/run and error log file is also not available in /var/log **
I need some help.Trying to set up bugzilla on my VM.After setting up the IP to use static i could log on to the url its not even loading up from command line its issueing an error.when i try to log on to mysql
bugzilla:~# mysql -u root mysql] ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
I'm the lead Dev of GnackTrack and we're having issues with running MySQL on the LiveDVD.Once installed everything works fine, mysql can be connected to but when using the liveDVD we get the following error:
Code:
root@root:~# mysql
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Contents of /etc/mysql/my.cf point to /var/run/mysqld/mysqld.sock but because this is a liveDVD the actual file is located in:
/rofs/var/run/mysqld/mysqld.sock
[code].....
I have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
installing mysql server manually. i have successfully installed mysql server but when i am try to create database, it shows error like this
ERROR 2002 (HY000): Can't connect to local MySql server through socket '/var/run/mysqld/mysqld.sock' (2)
** mysqld is not available in /var/run and error log file is also not available in /var/log **
We have been struggling with a problem with the mysql-server package. This might be in the wrong category because our problems are with it on x86_64. Where the problem happens variables that should populate from the my.cnf don't, on other servers, they do, the my.cnf files are identical except for the server-id
The problem occurs on some of our machines but not others. All are using the mysql-server-5.0.45-7.el5.x86_64 The ones that work, when you connect with a client respond with server version 5.0.45-log source distribution The ones that don't work respond with 5.0.45 source distribution
It's unclear what the differences are between the two source versions and how we wind up with two different versions. One thing that might be involved, the mysql package is installed with both the i386 and x86_64
i'm not the most knowlegable person but i have successfully installed mysql in the past. but now that i am attempting to install it again i'm getting this error during installation. has anyone seen this before?
mysql error: *Starting MySQL database server mysqld [fail] invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1
Starting mysqld daemon with databases from /var/lib/mysqli m installed mysql-5.0.77-4.el5_5.4
[root@serv ~]# mysql -u root
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
[root@serv ~]# /etc/init.d/mysqld stop
[code]....
I've created a mysql user and he can connect Joomla to mysqld when everyone has full permissions to the mysql homedir but I know this is bad from a security standpoint. If I set mysql user as the only one with permissions then I can't connect. I know Joomla support is not very help from past experience, wish I could dump it for something else but it does work great once it is configured so I need to keep it around, can anyone make a guess as to what permissions I need to have set on mysql's home dir so that joomla can still connect yet I am more secure than now?
View 11 Replies View RelatedSince /etc/rc2.d/S19mysql does not exists anymore, and then init.d/mysql uses /sbin/start, I am unable to use mysql server anymore: me@mycomputer~#start mysql [ret] ...... for hours this command never returns so that ^C aborts...
me@mycomputer~#ps axw |grep mysql ( no results, no mysql!!! ) me@mycomputer~#stop mysql [ret] no returns either!!! This upstart [start|stop] thing seems a total failure for mysql!!!
I have a RHEL5 machine having mysql5.0.22 is installed in it. i also installed java through "jdk-1_5_0_19-linux-i586.bin" package, and its version is 1.5.0_19. I am trying to check if any JDBC driver for Mysql Server is installed on my system . How can I do this? If any driver is already installed How can I get the file path for those driver files? is it comes along with jdk packages? As i am not a programmer, and does't know more about jdbc.
View 1 Replies View RelatedI was playing with the mysql my.cnf file yesterday, trying to move my database files to my dropbox folder so I can use the database on my other machine. All I changed was the datadir setting to point to my dropbox folder. I also moved my mysql data files there.
When I tried to restart mysql and test the new location it said my mysqld.sock was missing. I searched and searched the web and my filing system for it but I have no idea what's happened to it?? I have even tried changing the datadir path back and reinstalling mysql but that doesn't seem to work either.
from nmap localhost | grep mysql command i will come to know whether mysql server is running or not.my problem is i want to test whether mysql server is running or not in shell script and if it is running i need to tell the user to stop the server to run the shell script.
View 3 Replies View RelatedI'm running zoneminder on Ubuntu 9.10 Even with a UPS the power quite often fails enough that I need to drive over bring home the computer and run ( mysqlcheck --all-databases --auto-repair -p ) Then enter my user PW then my Mysql PW. Both are the same. How ever if it were possible to create a script that could run at start up I could get anyone to cycle the power and let it fix it's self.
View 6 Replies View RelatedI think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
i am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
I need to test an application on a Ubuntu Server that works as a database server for the network.
On this server's /etc/mysql/my.cnf, I have:
Code:
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
bind-address = <server-ip-address>
This means that I can't access the mysql server from 127.0.0.1, right?
I tried adding the following entry to /etc/hosts.allow :
Code:
mysqld : 127.0.0.1 : allow
I feel like I need to restart the service that reads /etc/hosts.allow, is this approach correct?
Or on /etc/mysql/my.cnf I can have two (or more) bind-addresses entries?
We are using wordpress with MYSQL. Both the app and DB server are different with 6CPU and 6GB RAM and 32bit processor. We had noticed recently that mysqld process is taking too much of system usage- ranging upto 100% of CPU utilization while having the load of 1200-1600 concurrent users.
Pasting d my.cnf file-
# The following options will be passed to all MySQL clients
[client]
port= 3306
[code]....
I have recently installed MySQL Server on my CentOS box.
CentOS 5 MySQL 5.0.45 (installed using 'yum install mysql-server') I can start the daemon without error by issueing the following command: service mysqld start
The problem is that I want to use a number of the command line options available to mysqld, such as --verbose and When I issue '/etc/init.d/mysqld --verbose --help' I get the following output:
[Code]...
I am not sure whether I ask this question on the right forum. My debian mailserver is depending on a MySQL database. Every reboot it takes around 30 minutes to boot because of the database check. I could not find the right command or setting to boot without this check. Do you know how to do this.
View 1 Replies View RelatedCan anyone tell me what command can be used so that the Linux Centos Server starts mysqld, httpd and ftpd services at boot time automatically?
View 2 Replies View RelatedI have a mysql server which "goes down" every day at 9, because the debian-sys-maint user needs to run a table check, for no particular reason.
I assume it's a cron-job, but I can't find anything related to this. There's the mysqlautobackup script, but that runs at 4 in the morning, which is expected and perfectly acceptable.
I'm having problems connecting to the mysql database on my system. I first noticed this when I was trying to set up the program anymeal. I subsequently tried using MySQL Administrator (mysql-admin), but had no luck. It gives my the following feedback:
Code:
Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Click the 'Ping' button to see if there is a networking problem. I press the ping button, and it seems to connect.
Code:
I've been attempting to set up a LAMP for local web development, which meant installing mysql-server. But now have a problem when trying to run mysql, I get:-
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
When trying to downgrade mysql-server I saw that there are dependency problems between the various modules (but can't recall which). But whichever route I truied the results are always the same.
Thought about trying XAMPP but I note that even has it's problems, is there any way I can get a lamp set up on FC14, or must I give it up as a bad job.
Howver, just been trying to again to fix the problems with downgrading mysql and get:-
Error: Package: mysql-server-5.1.55-1.fc14.i686 (@updates)
Requires: mysql(x86-32) = 5.1.55-1.fc14
Removing: mysql-5.1.55-1.fc14.i686 (@updates)
mysql(x86-32) = 5.1.55-1.fc14
I'm trying to setup wordpress on my server, which of course I need mysql for. I setup a database the other day, which worked perfectly, but I had to start again as I put some information in wrong. Now, I can create a database fine, but when I run
Code:
GRANT ALL ON wordpress.* TO wordpress@localhost IDENTIFIED BY "password";
I get the output:
[code]...
I have MySQL 5.1.34 and PHP 5.1.6 installed on my system, how do I install php-mysql? Each time I try, it says
mysql-5.0.45-7.el5.i386 from base has depsolving problems
-- > mysql conflicts with mysql-server-community
error: mysql conflicts with mysql-server-community
I was having issues with MySQL Server and uninstalled it. I still have my databases at /lib/var/mysql.
My question: if I install MySQL Server (same version, 5.1) again, will it delete my databases, or will they still work?
How can I really, really remove everything related to mysql / mysql-server. I read and tried all kinds of things, but on every reinstall there is still old mysql stuff there, for example an existing password. Even resetting the password does not help.
Reason of removal: it looks like the mysql setup is really corrupt, so I want to remove, and then do a fresh install. Running Ubuntu 11.04 64-bit
sander@R540:~$ sudo apt-get purge mysql-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package mysql-server is not installed,
[Code]....