Server :: Services Not Working Properly After Power Breakdown
May 20, 2010
Today, I need to talk about some strange problem that faces me in my Linux Server, the power goes down and my server goes off, but when the power returns the server powered on and it works, but some services are not working properly like:
SSH, HTTP
When I try to login remotelt via ssh client like putty it ask me for username but, it hangs after I put my username and not asking me for the password. The second error is related to my web-server which redirect me to Apache default page and when I go for the terminal to make restart for httpd service, here is the output :
> service httpd restart
Stopping httpd: [ OK ]
Starting httpd: [Thu May 20 10:51:15 2010] [error] (EAI 3)Temporary failure in name resolution: Could not resolve host name admin.abakhiet.info -- ignoring!
[Thu May 20 10:53:07 2010] [error] (EAI 3)Temporary failure in name resolution: Could not resolve host name [URL] -- ignoring!
[Thu May 20 10:53:07 2010] [warn] NameVirtualHost 196.202.58.94:0 has no VirtualHosts
[OK]
View 2 Replies
ADVERTISEMENT
May 27, 2011
My Question is I have installed the ssh key authentication in Server A. User can connect this using key file via SSH. without authentication user can't connect this system via SSH. Now I am trying to copy the file from Server B through SCP command. But it is not working. While I am trying use this command from Server B I am getting below error "ssh: connect to host xxx.xxx.xxx.xxx port 22: Connection timed out lost connection". xxx.xxx.xxx.xxx is Server A. SSH is enabled in both server A,B.
why SCP command is not working?
View 1 Replies
View Related
Jun 21, 2010
Am using rhel5 server, in my server cbq time check was not working properly am using this cmd TIME=18:00-6:00;300Kbit/25Kbit,
View 1 Replies
View Related
Jun 23, 2010
Ok so I've been all over Google trying to find an answer as to why my MPD server won't properly output over httpd. When I try to connect to it from any source, it gives me a "404:Entity Not Found" error. There hasn't been any useful info out there to solve this problem. Help please! Attached is my mpd.conf file. All my permissions and firewalls are set up properly AFAIK.
View 5 Replies
View Related
Apr 13, 2010
I am using Fedora 12. I have the following problem, when i working with system-config-samba dialog:I add the new user on the server:as following:
Unix username: vova
Windows username:test
As described in Customisation Guide for Red Hat 9: "If the user has a different username on a Windows machine and will be logging into the Samba serverfrom the Windows machine, specify that Windows username in the Windows Username field."So i logged from the Windows machine not under test(Windows username) but under vova.And i logged in without the problem. However it seems that samba should check windows username=test (as have written in samba-config) and ask an password for different users. And additionally, if samba check the currect user in Windows itself and verify it with Unix user, what for we need write the Windows username in samba config? I don't understand
View 6 Replies
View Related
May 31, 2011
I have created a website in php.wamp server is used to run the site.i created the database in phpmyadmin using mysql.These all were done in windowsXP.Now I want to import it into redhat linux system.how can I import database and its tables to rhel4 inorder to working the website properly
View 7 Replies
View Related
Mar 20, 2010
I am running a quad core centos 5.4 box that is having a strange problem with dovecot. The administration panel is able to send emails through dovecot but not any of the user accounts (ie with webmail). I've done a bit of research with what could be wrong but haven't had any luck so far I am also having a weird problem with apache: on a c++/php bittorrent application I was going to be running on a subdomain of my main site I get a 500 error every time I try to log in. The only way to get rid of the 500 error is to clear the chache (so its horribly broken somehow). The error generated in the log whenever I try to log in is that "ffmpeg is already loaded" (which I am running on the main site and is critical). Is there a way of either repairing my apache install or excluding ffmpeg on the subdomain in the conf or something?
View 2 Replies
View Related
Nov 19, 2009
My monitor kept powering down after 20 minutes so I installed Gnome-power-manager by yum so that I could change the settings. After the installation and every time I try to use it I get a message saying:
Quote:
Install problem!
The configuration defaults for Gnome Power Manager have not installed correctly. Please contact your computer administrator
I'm now unable to effect a change in the power settings and the display keeps turning off.
1) Is someone able to post their config file from a working F12 install? I believe it's /etc/dbus-1/system.d/gnome-power-manager.conf but not certain as I don't have one ;-)
2) ~/.gconf/apps/gnome-power-manager/%gconf.xml is empty - is it empty for someone with a working install?
3) how I can change the power settings without the gui - I'm googling on this point and will post the answer as and when I find it.
Code:
[ecvej@desktop ~]$ uname -r
2.6.31.5-127.fc12.x86_64
Edit: In case it is relevant, this is the contents of my /etc/gconf/gconf.xml.system/%gconf-tree.xml
[Code]....
View 2 Replies
View Related
Jan 16, 2010
The Disk Usage Analuser application in GNOME (baobab) only displays directories, not files. I think this is a huge deficiency that greatly reduces it's usefulness. Can anyone recommend an application (preferably GNOME/GTK) that's capable of providing a graphical break down of disk usage for the contents of a user's home directory with both directories and files sorted by the amount of space they take up? Like ncdu but with a GUI.
View 6 Replies
View Related
Apr 6, 2011
After installing Red Hat Enterprise Linux 5 (RHEL5) the system generates a kickstart script, one section of which is about the package groups installed. For example:
Code:
...
%packages
@admin-tools
@base
@base-x
@core
@editors
@ftp-server
@java
@server-cfg
@text-internet
...
Before using this kickstart script for another installation I'd like to know what packages are included in each group, how can I get this information? For example, how can I know the list of packages I will install by having the line: @java in the kickstart file? Any Red Hat documentation about it? I could not find any...
View 3 Replies
View Related
Jun 5, 2011
Few days back when I tried to install java application using software manager, I got the message that my software manager has broken down. Since then I was not able to install any of the applications either through terminal or the software manager. Luckily, I got another fresh copy of Linux Mint 10(Julia) installed on my laptop. Looking for some efficient method of installing the required applications(java and its associated applications) so that I do not face such problems again in the future.
View 5 Replies
View Related
Apr 25, 2011
I had a problem with apache2 and getting .htaccess working. I have done some things and i believe its working the ErrorDocument command is anyway. I believe there may be some problems with the rewrites though.Im trying to take a urlhttp://localhost/showthread/123and make it display whats on http://localhost/index.php?showthread=123The rewrite rule is Quote:
Options +FollowSymLinks
RewriteEngine on
RewriteRule ^showthread/([^/.]+)/?$ index.php?showthread=$1 [L]
[code]....
View 8 Replies
View Related
Dec 7, 2010
So I want to get mount/umount option under right click services menu. I went to Dolphin -> Settings -> Configure Dolphin -> Services -> Download New Services and from there I installed KDE CDEmu Emulator and MountISO. But neither of them is showing up in actual context menu. Neither in Dolphin -> Settings -> Configure Dolphin -> Services for that matter. I tried to install them as normal user and as a root. I went to have a peak in /usr/share/kde4/services/ServiceMenus/ but they aren't there as well... It's just me or lots of things seems to be not quite working in 11.3?
View 9 Replies
View Related
Sep 13, 2010
How can Vsftpd services & Xinetd.d services can be differentiated?
View 5 Replies
View Related
Oct 25, 2010
I installed an LAMP Server on 10.10. Additionally a simple Sambaserver and a VPN is integrated. Since 3 days I look at some strange behaviour:
Code: sudo init 6 does not take effect. Nothing happens. Code: sudo reboot is working, but all seems to be so ropy. It takes a significant while, before ssh-session is finally terminated. After the system comes up again, the vpn-client gets not the same IP-address by DHCP-server, but the next following of dhcp-range. That is strange, because no other dhcp-client is busy. After a second reboot I get the correct first IP-address of the dhcp-range. That is reproducible.
cron is not working any more. None of my jobs is being triggered. Nothing is logged in /var/log/syslog any more. Services (apache2, mysql, smbd) are not running at the start. I have to run them up manually. Seems like init is somehow smashed? What is your guess? What futher information do I have to provide for analysis?
View 2 Replies
View Related
Jul 5, 2010
i have a server which i dont know what was installed on it, it was sent for me to find out.
View 5 Replies
View Related
Feb 2, 2010
How can i find web hosting services? I have my own site and want to web hosting for that.
View 2 Replies
View Related
May 5, 2011
How can I find the order of stated services in boot process? For example I want to check which one runs first: /etc/fstab or networking? I am using ubuntu server 10.04
View 7 Replies
View Related
Dec 21, 2010
Does anyone know why vi text editor would not work. I'm running Ubuntu server with SIP service and apache and when i try to edit config files with vi it gets messy.On the bottom of the screen it would not indicate if I'm in backup mode or not. I won't same changes, and it messes up the layout when you use arrow keys to move between the lines. Also sometimes when I use arrow keys it will insert capital A, B, C or D.
View 5 Replies
View Related
Apr 28, 2011
I have a Lenovo W500 ThinkPad. It is running XP on first partition, then Ubuntu. I've tried both 10.10, 11.04 beta 2, and now 11.04 release.With the release I just installed, it seemed OK till reboot-after-install, at which point nothing came up. I rebooted several times and just got errors and kernel panics in the ATI video driver. I also saw a lot of these messages:"udevd[80]: worker [XXX] did not accept message -1 (Connection refused), kill it" URL...
I had download updates on, I'm trying again with a clean install without updates. (Although, I said don't download while installing, and it says it is downloading language packs...?)Now, I also had issues with 10.10, where it would intermittently boot and fail to get video, I'd just be at a tty, and have to reboot and try again. I found it usually got video if I had just booted Windows (XP Pro SP3) beforehand, and not otherwise So what's going on there? Something up with the actual video card? I want to run Gnome anyways, is there a way I can specify that during the install?At any rate, if I can't get 11.04 working properly, I'll have to run 10.10, which I didn't want to do. I'm starting from scratch and wish to start from 11.04 if at all possible.
View 2 Replies
View Related
Apr 29, 2011
So yesterday I upgraded to 11.04 from 10.10 and now when I enter Ubuntu only my background image appears. No files, programs, or anything. It worked right after it rebooted to finish the upgrade but when I turned my computer on this morning I got nothing but background.
View 4 Replies
View Related
Aug 1, 2010
I've noticed that, I can not copy a file trough scp .here is an example:
[root@Radius ~]# scp 123.txt /etc/logrotate.d/radiusd.log "nasser@192.168.8.46:/tmp"
nasser@192.168.8.46's password:
[root@Radius ~]#
[code]....
View 2 Replies
View Related
Jun 21, 2010
I have a Linux server and 5 desktops. When I shutdown and restart my server the DNS services gets stopped. I dont want it to stop, when i shutdown. It should run. How to enable it.
View 2 Replies
View Related
Mar 10, 2010
We have our web site hosted by Go daddy and they provide us with the mail service as well. But there are a lot of constraints with the mail service with regards to the number of mail boxes, size per box, relays per user and so on.To avoid this, we are looking at other options. One is to have our own mail server but it will require a lot of infrastructure and expertise. But Amazon web services looks nice. They have infrastructure needed and all. One thing on my mind is the reverse look up of the mail servers. They wont be associated with the domain as both would be on different hostings. I am open to both windows exchange server as well as Linux server. Has anyone done this before or has any idea about it? I have gone through some of the threads in their forum and there are a lot of mixed views about it.And main concern everyone views is the reverse lookup. This could lead to all the mails sent from my server tagged as spam at the recipient end.I could not make out in which forum to write and hence in newbie. If this is enough about networking or server please move it.
View 9 Replies
View Related
Oct 23, 2009
I am running a linux VPS with ubuntu 8.04. My VPS provider doesn't have domain services so i have to host my own domain. I am using bind9 and cant "catch or grab or whatever you want to call it", my domain name. I used go daddy to create my domain and I created my own name servers with the ip's I use on my VPS. I have been trying to go at this all week, all i need to do is get my domain running and then my site will be good to go cause I already have everything else running smoothe it seems. any help at all is very appreciated. I dont know what kind of info you need from me so ask whatever you need to. I am going to use a fake domain and ip in on here just to protect myself.Also I have tried many tutorials and have been searching around the net and forums with no luck.
View 3 Replies
View Related
Jun 11, 2011
I have tomcat server that requires restart to clear some java issues. I would like the system to send out an email alert that the tomcat got started everytime when it does. Anyway to achieve this whenever someone fires off a service?
View 1 Replies
View Related
Mar 5, 2011
I have installed squid using CentOS 5.When the server boot there are default services which are enabled at Boot time. My server is dedicated only for squid proxy server.I want to know how that when my server boot only the relevant services should start which may helpful for squid. Remaining unwanted services should be disable because they are just occupying memory of the server. Kindly guide me which command I should use and which services may I disable for smooth functioning of my squid
View 1 Replies
View Related
Jul 31, 2010
I'm using Ldap to authenticate some services in my company, but from a few days, i finds some errors saying
Quote:
I'm using webmin to manage its servces.
View 4 Replies
View Related
Dec 1, 2010
I am trying to run two different copies of vsFTPd service in the same server, one for IPv4 and the other one for IPv6. Because as I know that you cant run one vsFTPd server for IPv4 and IPv6 in the same time.
View 10 Replies
View Related
Oct 16, 2009
I recently installed CentOS 5.3. There I select desktop package (Gnome and KDE) didn't select server in CentOS 5.3 installation gui. I want to connect to the windows active directory domain in our company. To do this I want to run the samba service. But it is not listed in the services. (#service --status-all) but I cant see the samba config file smb.conf why I cant run this other services smbd, nmbd is also not listed. But winbind is listed and I started it.
[root@bryan-adams etc]# yum list samba
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: ftp.iitm.ac.in
* updates: ftp.iitm.ac.in
* addons: ftp.iitm.ac.in
* extras: ftp.iitm.ac.in
Available Packages
samba.i386 3.0.33-3.7.el5_3.1 updates
View 2 Replies
View Related
