Server :: Rewrite Engine On - Won't Load The Index.php

Jun 27, 2010

I have been working on this for the last couple of days, but I don't seem to be getting anywhere with it.

I have a Fedora 12 64bit Server set up, and for the most part it's working Great. I have 3 VHost set up, and no problems with that.

My problem is I just moved my Wife's xcart store from Godaddy to this server. And the store works great. But xcart is set up to use Clean URL's, and this is what I seem to be having all the problems with.

In my "httpd.conf" file, I have "AllowOverride All" to use ".htaccess" and in xcart ACP I have it set to use Clean URL's. I added a ".htaccess" file to root folder, with this in it.

Quote:

Now if you try to log in to the store with just the base url "www.my_site.com/" I get a the Apache Test page. But if I enter "www.my_site.com/index.php" the Home page opens, and all clean url's from there work fine. ALL other pages will open just fine. So clean URL's is working. Its just the home page that won't load right.

Now if I change the ".htaccess" file, and set "RewriteEmgine Off", then the home page will load like it should with the base url., but then "Clean URL's" no longer work. I have to change "AllowOverride All" to "AllowOverride None" and turn Clean URL's off in the ACP of xcart. to get the store working again.

Then the whole site works just fine, just No Clean URL's. I'm at my wits end with this, don't know what else to try to get this to work. So I was hoping someone here might have an answer, or at least some ideas to try. This all worked just fine on GoDaddy's site, I left because it was just too dam slow. It took a minute and a half just to load the Home Page. On my server its less that 2 seconds. And every time I asked them about it, it would speed up for a few days then slow down again. But the same .htaccess file worked on that server. So I think my problem is in my "httpd.conf" file just don't know where.

View 6 Replies


ADVERTISEMENT

Server :: Mod_rewite Is Loaded Htpsd.conf Has "rewrite Engine On" Directive Enabled?

Mar 10, 2010

I have a query on mod_rewite/apache/.htaccessIt is like this:Suppose a company have a website www.abc.com,when a user types in this URL in his browser he should get a login and passwd prompt say he enters username as user1 and some passwd, upon successful authentication he should get redirected to another url similary for user2 and user3...mod_rewite is loaded htpsd.conf has "rewrite engine on" directive enabled.

View 1 Replies View Related

Software :: Squirrelmail Doesn't Load Index Page?

Jan 20, 2010

i have a machine with RHEL 5.1 sendmail-8.13.8-2.el5, uw-imap2007-e-7.el5, php 5.3.1, and apache/2.2.3, but i have a problem, i installed Squirrelmail 1.4.19, but i can't access my index.php page, when i load http://localhost/squirrelmail/ i get the image (main.png), and when i click the index.php link i get this:Quote:

<?php
/**
* index.php

[code]...

View 4 Replies View Related

Server :: Apache MOD REWRITE ?

Jan 19, 2010

I want to redirect [url] to [url] how to do this? The only solution that came up is just redirect everything to a php file, and than ask the php file do the redirect..... I want to do it using .htaccess file instead of using PHP or CGI.

View 4 Replies View Related

Server :: Rewrite To Redirect All To A Php File?

Dec 13, 2010

I have simple blog I created myself. I am using mod rewrite to redirect all to a php file. But I have links in google like [URL]

How can I match it with regular expression? I try with variants of ^([^/?]+)/$ but with no success.

The desired result is to redirect such addresses to [URL] or to 301 page

View 7 Replies View Related

Server :: Rewrite This In The Global Configuration?

May 28, 2011

got a small setup in /home/username/public_html/.htaccess.


Code:
Action php-fcgi /~robert/fcgi-bin/php-fcgi-wrapper
the php-fcgi-wrapper is in /home/username/public_html/fcgi-bin/php-fcgi-wrapper or in the

[code]....

View 4 Replies View Related

Server :: Rewrite Rule For Url Change?

Jan 18, 2010

I want to rewrite one url using apache mod_rewrite,

myurl is [URL]

and want to rewrite like this. [URL]

View 2 Replies View Related

Server :: Rewrite For Https In Apache Server?

Nov 9, 2010

We have a apache server which have a ssl certificate like www.abc.com. We hosting a website is a online giving shop which need ssl cetificate in https. website of this is www.123.com, it will redirect tow this website owner don't want to show What can I do to achieve this ? Can I use rewrite function in apache to achieve this? How? or we need to buy any other ssl certificate for www.123.com? How can I install multiple sslcertificate in one apache server?

View 4 Replies View Related

Server :: Dynamic URL Rewrite And Redirect In Nginx?

May 20, 2010

how could i rewrite and redirect

Quote:

[URL]

to

Quote:

[URL]

domain from forum. to club. (red color part) url rewrite, blue color part is variable

View 3 Replies View Related

Server :: Rewrite Sender Address In Postfix?

Dec 27, 2010

I need to have a postfix server to rewrite the sender's address. For example, if the sender is: [URL], then the recipient would receive all emails from [URL] as [URL]. I tried using the generic file and created a table out of it, but this did not work:

postmap /etc/postfix/generic
-rw-r--r-- 1 root root 9977 Dec 27 15:24 generic
-rw-r--r-- 1 root root 12288 Dec 27 15:25 generic.db

I added this line to the generic text file:

[code]....

I am running two boxes with postfix 2.3.3. and 2.1.1 respectively. Both need this configuration. I also added this line:

smtp_generic_maps = hash:/etc/postfix/generic

on the main.cf file. However, this did not work. The one running postfix 2.3.3 is on Centos 5.5, the other one is on SuSe Enterprise 9.

View 14 Replies View Related

Server :: Avoid Complete Web Site Rewrite

Aug 28, 2010

I've moved a web site from one server to another.I'm also moving the domain name to the new server.In Apache I've got the web site configured up and running with no problems. What I'd like to know if this is possible. I'm wanting to avoid a complete web site rewrite. I've looked into mod_rewrite but I don't think this is right.I only want the web site to look aesthetically pleasing. So if it's not possible so be it. (I'm not a programmer but do have access to the code)

View 2 Replies View Related

Ubuntu Networking :: HTTP Rewrite To Internal Server?

Nov 11, 2010

I have a registered domain that resolves (via dyndns) xxx.mydomain.com to my external facing router -easy no issues there. Behind the router I have several machines (some VMs) running webservers, mail etc... What I want to be able to do is redirect the external traffic based on xxx to the relevant internal machine and serve the content back to the external world.

I have tried using a http rewrite of xxx.mydomain.com to the relevant machine an it works fine from within my network, however externally the re-direct fails as the master DNS servers have no record of internal DNS setup in my network (obviously).

So is there anything I can do to get xxx. recognized externally? I'm only just starting to get my head around how DNS, HTTP, TCP etc all hang together. Am I barking up the wrong tree with rewrite? Should I be looking at proxys?

View 1 Replies View Related

Server :: Enable The Rewrite Module For Apache 2.0.53 In Redhat?

May 27, 2010

redirect a domain name with /abc to external ip of web server. Now I can made sure that I should use the rewrite module to achieve this issues. But I don't know how can I enable this function in my apache web server. I will post my httpd.conf for your reference.

View 14 Replies View Related

Ubuntu Networking :: Cannot Enable Mod Rewrite On Local Apache Server

Feb 22, 2010

I have a base install of a LAMP server on my system, and I'm trying to get mod_rewrite working on that local server (the directory of the local site is [URL]. I added this to my /etc/apache2/httpd.conf file, which was blank before I did so:

Code:
<Directory />
Options FollowSymLinks
AllowOverride All
Order deny,allow
[code]....

It's supposed to redirect everything except the listed directories to index.php, which is used as a front controller. However, if I type in [URL] <any other page> I get a 404 error.

View 2 Replies View Related

Server :: Rewrite / Redirect Directory To Port Number In Apache?

Jun 4, 2011

I have a website example.com, serving pages on port 80. I want the url example.com/redmine to be rewritten to port 3000, where my redmine server is running, without actually changing the URL. So the user typing in example.com/redmine/test would serve up example.com:3000/test, without the user actually connecting through the port. I know this can work through CPanel, but I don't know exactly how it was implemented. I'm looked at how mod_proxy, mod_proxy_html, and mod_rewrite,

View 4 Replies View Related

Server :: Nginx Virtual Hosts & Wordpress Rewrite Rules?

Sep 14, 2010

I'm trying to set up my web server (nginx) as a catchall virtual host, as per an example that can be seen here: [URL].. (It's the Wildcard Subdomains in a Parent Folder example). Now, here's my issue. I use Wordpress on the coburndomain.org domain. I have pretty URLs enabled, that make my Wordpress articles look like this:[URL].. At the moment, nginx is reporting 500 Errors, saying that index.php is not a directory. What I want to do is make a rewrite rule that allows me to use the above URL example with nginx.

I followed this tutorial to do so: [URl].. , but I'm not sure how to apply it to my setup. Here's my configuration files from Debian Squeeze with Nginx onboard:

[Code]...

View 1 Replies View Related

Server :: Index.php - On Server - Offered For Download Rather Than Being Interpreted?

Jan 18, 2010

I have SLES10 SP3 with Apache2 in version 2.2.3 and php5.

I have a virtual host configuration with one vhost.

The /etc/apache2/listen.conf:

Code:

In _web-ims.conf:

Code:

This directory (/etc/apache2/conf.d) also contains the php-config-file php5.conf which now gets interpreted (I suppose):

Code:

Actually things are working OK.

However, ON THE SERVER php only gets interpreted by the FireFox browser when called upon localhost:
[url] //Works fine.

When called thru the IP:

BUT when I call
[url]

FROM ANOTHER CLIENT-COMPUTER, for example my windows computer with XP, using Internet Explorer, then it works!

So, does s.o. have any idea why the same call that does work on another client does not work on the Server? And why does the call with localhost on the server work?

Is that a bug in the FireFox-Browser or where do I have to tell him that he should interpret the php-code also from the IP and not only from loccalhost?

View 2 Replies View Related

Server :: Access The Servlet Engine's Web GUI Just Fine Over Its Dedicated Port Via Browser?

Nov 26, 2010

Been a while since I last posted here, though I stop by often. Unfortunately I find myself in a bit of a pickle again. Here's the situation. I have an RHEL3u5 server running Apache 2.0.48 and an equivalent of Tomcat and JBoss. IBM's WebSphere Application Server 6.0.2 to be exact, the Apache also being one of their flavors (IBMIHS).

Everything's been going dandy since forever, but lately the httpd processes seemingly just hit a brick wall of some unknown kind. Checking the /server-status page reveals a whole lot of piling up "waits".

The funny part is that the load average rarely goes higher than 1.0, I/O seems within limits, memory usage as far as I can tell seems fine, disk usage appears all good... I would've felt more at ease if something did shoot through the roof, but there's just nothing to go on. It's definitely Apache getting its knickers all in a twist as well since I can access the servlet engine's web GUI just fine over its dedicated port via browser.

Here's what I noticed so far: Apache processes rise steadily to over 35 or so, after which it all goes south fast. As a result and as a temporary fix, I've enabled a cronjob that checks the amount of httpd processes and just restarts Apache if they're above 28. So far this seems to keep things sort of happy, but obviously I'm still twitchy with the overall state of affairs. I do not have the settings immediately at hand, but here are some further details so far:

Server spec:
8 x Xeon CPUs
8GB RAM

I'll post further details probably on Monday, specifically key portions of the httpd.conf file.

View 2 Replies View Related

Server :: MySQL Error 134 From Storage Engine Query: Select Data, Created, Headers?

Mar 1, 2011

I need help about the error in my website. I have the following error....

Code:
user warning: Got error 134 from storage engine query: SELECT data, created, headers, expire, serialized FROM cache WHERE cid = 'theme_registry:database1' in /var/www/html/web/includes/cache.inc on line 26.

View 2 Replies View Related

Server :: Can't Display Index.html Under Fedora 12

Apr 6, 2011

I have displayed web pages (e.g., index.html) under fedora 4, 5, 7, 8 before with no difficulty. Now I troed to do similar thing under Fedora 12, and I cannot display index.html. Is Fedora 12 special? I did '#tail -f /var/log/httpd/error-log' and noticed a line:

"SELinux policy enabled; httpd running as context system_u:system_r:httpd_t:s0"

Is the SELinux policy blocking me from displaying index.html page?

View 14 Replies View Related

Server :: Apache - A Default Index.cgi When Directory Is Browsed ?

May 20, 2010

I've set up Apache once or twice in the past, but my memory is escaping me on something simple. This time the OS is Cent5 with Apache/2.2.3

When a user browses to: [url] <nothing else> I get as expected, a '403 'You don't have permission to access' because directory browsing is off for obvious reasons :-) If I enter the full URL to the script: [url]it works as expected. No issues there.

What I would *like* to do (and I'm sure I've done this before) is to set the cgi-bin up so if someone leaves off the script name: http://host.name/cgi-bin/ it serves "index.cgi" pretty much in the same way that if you browse to the root http directory, you index.html||php would normally serve. I just can't remember how to achieve this simple thing and I'm starting to wonder 'am I mad? - Did I do this before?'.

Sanity check - index.cgi exists and runs if you call it directly thus:

Code:

I have added:

Code:

That made no difference.

Tried:

Code:

For good measure, but that made no difference - and even

Code:

and no amount of playing with 'Options Indexes || -Indexes || +Indexes' helped me.

Like I say, I'm sure I've done it before (on Debian/Ubuntu) without the need to start playing with redirects or .htaccess - but I'll be blowed if I can remember how.

View 2 Replies View Related

Server :: HTAccess - Auto Index Not Showing Some Directories

Oct 5, 2010

I have a VERY simple setup, or so I think. 1 VirtualHost that it's only purpose is to list some files and directories, now under the DocuemntRoot there is 1 named clients. Insdide clients there are 4 folders, you guessed it, one for each client. I setup simple .htaccess for each one of these folders so each one has it's own auth.

Now on the vHost I have this:
Code:
<VirtualHost *:443>
ServerName vpn.domain.com
ServerAlias vpn.domain.lan
ServerAlias vpn
DocumentRoot /var/www/vpn
#ErrorLog /var/log/apache2/http-vpn.log
#LogLevel error .....

Now the weird part, with the AllowOverride AuthConfig those 4 directories for each client are not being displayed, if I set AllowOverride all, then the directories inside clients are not listed, if I set it to none.... then the server lists them but ignores the .htaccess.

View 9 Replies View Related

Server :: Lighttpd - Name Index.html Of Additional Domain?

Apr 13, 2011

For the 1st domain,say domain1. I name the index file as:

[code]...

3 identical files. It works seamlessly. On browser its webpage can be evoked. Now I add another domain, say domain2. How shall I name its index files?

[code]...

View 1 Replies View Related

Software :: Edit Index.html File Of Apache Web Server

Aug 16, 2010

Do I need to restart the webserver if I make any change in the file index.html? Or should the changes get reflected when I open the page again without restarting the service?

View 3 Replies View Related

Ubuntu Networking :: Wrong Pointing - Picking Up The FIOS Login And Not Even The Index Of Server

Feb 11, 2011

I recently installed Linux Mint and went through the whole business, but when I go to my DNS's it just goes to my FIOS login.

dns:
foxwebhosting.dyndns.org
foxwebhosting2.dyndns.org

I tried everything in mind, but I think the big issue has to do with the reason why it's picking up the FIOS login and not even the index of my server.

View 3 Replies View Related

CentOS 5 Server :: HTTPD - Forbidden Dont Have Permission To Access /index.html?

Mar 3, 2010

Basicly just installed a fresh version of Cent OS 5.4 with apache httpd installed automaticly during the installation. The http daemon is running and when navigating to localhost i get the welcome cent os apache page thingy. The problem is when i put an index.html file in /var/http/www then try and navigation to localhost I get a 403 forbidden error.

View 2 Replies View Related

Ubuntu :: Possible To Use Testdisk To Rewrite MBR?

Jun 14, 2011

Is it possible or wise to use a program like 'testdisk' running on an Ubuntu 32-bit system to rewrite the MBR of a Windows 64-bit system hard drive? I am only asking because I am cleaning someone's HDD after they got infected with a Trojan called "Dos/Alureon.A. They were worried that they might have to do a re-partition and clean install.

View 4 Replies View Related

General :: Want To Copy With Rewrite

Jul 23, 2010

I want to copy but without asking method or -r option .

View 2 Replies View Related

CentOS 5 Server :: Improve Server Speed On Servers With Heavy Load?

May 4, 2009

There is a tool appeared in repository called ktune; The purpose is to adjust some sysctl.conf settings to improve server speed on servers with heavy load. What is this tool for if one can achieve the same with the configuration file added to system startup? Or ktune is just such file?

View 1 Replies View Related

Ubuntu :: Apache Rewrite: Can't Turn It On?

Feb 10, 2010

I have done a2enmod rewriteand rewrite.load appears in the mods-enabled subdirectory.

My httpd.conf file contains DocumentRoot "/usr/appl/prod/htdocs/" <Directory />Options FollowSymLinks
AllowOverride All
Order deny, allow

[code].....

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved