Server :: Access The Servlet Engine's Web GUI Just Fine Over Its Dedicated Port Via Browser?
Nov 26, 2010
Been a while since I last posted here, though I stop by often. Unfortunately I find myself in a bit of a pickle again. Here's the situation. I have an RHEL3u5 server running Apache 2.0.48 and an equivalent of Tomcat and JBoss. IBM's WebSphere Application Server 6.0.2 to be exact, the Apache also being one of their flavors (IBMIHS).
Everything's been going dandy since forever, but lately the httpd processes seemingly just hit a brick wall of some unknown kind. Checking the /server-status page reveals a whole lot of piling up "waits".
The funny part is that the load average rarely goes higher than 1.0, I/O seems within limits, memory usage as far as I can tell seems fine, disk usage appears all good... I would've felt more at ease if something did shoot through the roof, but there's just nothing to go on. It's definitely Apache getting its knickers all in a twist as well since I can access the servlet engine's web GUI just fine over its dedicated port via browser.
Here's what I noticed so far: Apache processes rise steadily to over 35 or so, after which it all goes south fast. As a result and as a temporary fix, I've enabled a cronjob that checks the amount of httpd processes and just restarts Apache if they're above 28. So far this seems to keep things sort of happy, but obviously I'm still twitchy with the overall state of affairs. I do not have the settings immediately at hand, but here are some further details so far:
Server spec:
8 x Xeon CPUs
8GB RAM
I'll post further details probably on Monday, specifically key portions of the httpd.conf file.
View 2 Replies
ADVERTISEMENT
Jun 23, 2011
I am currently having an issue attempting to set up a dedicated server for source games (TF2, CS:S, L4D2). The required port (27015), along with most others, appears closed to the rest of the world and upon a port scan with DMZ hosting on (therefore no router interference between the internet and my computer) only a few ports are open (80, 139, 443, 445). My ISP does not block ports so therefore the only issue I can find is with my computer running Ubuntu 11.04. I have ensured that all traffic is allowed via iptables and I can't think of anything else that would have ports closed.
View 9 Replies
View Related
Jul 21, 2009
I was unable to access my dedicated server for few minutes. I have checked the apache error logs and found below notice:
[notice] caught SIGTERM, shutting down
I have tried to search from Google but could not find much information about this error.
View 2 Replies
View Related
Jan 22, 2011
So this is my first post so I'll put it in "Newbie".I seem to have successfully configged my httpd.conf file to listen on port 8008. I restarted httpd ok. However, when I go to port 8008 in a web browser from another computer on the internal network by going to 192.168.2.5:8008, it doesn't connect. When listening on port 80, I can browse to the IP address fine. is this a server-side or client-side issue? Using Fedora 12. Thanks in advance and tell me what forum this would best fit in.
View 11 Replies
View Related
Aug 12, 2011
I have a vps server running certain services which can be accessed via a web browser (e.g webmin control panel), but I have recently been unable to access these services from my home machine using Firefox 5.0, running ubuntu 11.04.
Example:
I can access the server on port 80 fine, eg: [URL]
However I cannot access my webmin control panel on: [URL]
The pages takes ages to load and then times out. Same with transmission-daemon on: [URL]
Everything is set up fine on my server, the ports are open in firewall etc. and I can access these pages fine from my work computer.
This has only started happening in the last day or two and had been working fine up till then. I have not messed around at all with the firewall on my home machine. I have tried other browsers besides Firefox with same result.
View 4 Replies
View Related
May 24, 2010
I want a internet browser to open a site that needs java engine,firefox has not this and also galeon :
The certificate is not trusted because it is self-signed.
(Error code: sec_error_ca_cert_invalid)
* This could be a problem with the server's configuration, or it could be someone trying to impersonate the server.
* If you have connected to this server successfully in the past, the error may be temporary, and you can try again later.
Or you can add an exception
You should not add an exception if you are using an internet connection that you do not trust completely or if you are not used to seeing a warning for this server.
If you still wish to add an exception for this site, you can do so in your advanced encryption settings.
How i can add exception or it is better to say me that :is there any browser instead of internet explorer for linux??
View 12 Replies
View Related
May 10, 2010
I was trying to have access from a browser to the squirrelmail configtest page in my server, making some changes, I accidentaly remove the directory webmail. After I replace it with a backup apache2 can not start. This is what I have. Syntax error on line 281 of /etc/apache2/apache2.conf: Syntax error on line 1 of [URL].. closed. But I am sure there is a ?> at the end of this file.Base on what I read on [URL]...-with-the-tag/ I test without the ?> also, but I got the same error.
View 2 Replies
View Related
Apr 19, 2011
I've spent days trying to setup access properly from a public address to a monitoring server that works fine locally. Everything works from public access until I try to link to a CVS repository. The rancid CVS repository is set up as a separate server (virtualhost). It appears the referring link causes a DNS error (105: Server Not Found) when the CVS repository server is accessed from the public address. Things work fine when accessing via localhost.
Localhost link:
[URL]
Public link: (this results in 105 error caused by redirection (bold portion of link))
[URL]
Code:
Virtualhost config:
LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so
JkWorkersFile /etc/apache2/workers.properties
JkLogFile /var/log/apache2/mod_jk.log
[code]....
View 2 Replies
View Related
Feb 15, 2011
I want to create a Java Servlet that will interface with a shared object (.so) library. The library is a component provided by a SDK manufacturer. This Java Servlet will be hosted on Apache Tomcat running in the Amazon Web Service (AWS) Cloud.
View 2 Replies
View Related
Jul 19, 2010
I installed a server called Oracle VM Manager, which is actually a web based application to manage Oracle VM server.After successfully installed everything, it suppose to be access by browser using But strange thing is, I can see web pages from the server itself with but any other machines to access it with hostname or ip address all failed.
View 2 Replies
View Related
May 10, 2010
I have a linux server , there are many files in it , I want to let the user to use browser ( windows ) to access the files to upload / download files , as below command , the user can access the path in the server "linuxserver".
View 5 Replies
View Related
Sep 7, 2009
I'm running Fedora 10 with apache and I installed mod_dav_svn so that I could set up a secured remote code repository. It appeared to be working ok until I turned on SSL and basic Authentication.I even verified in my subversion.conf httpd configuration file that it is pointing to the correct password file. When I attempt to access it from my web browser, it prompts me for a user name and password, but it will not let me log in. I tried to disable SSL thinking that that might have been the problem, but I get the same results either way. Can anyone please help me resolve this problem?
View 4 Replies
View Related
Mar 9, 2011
tried to subversion webaccess from browser,it is asking username and passwordsnter both.its asking again. how to login.configuration shown below
vi /etc/httpd/conf.d/subversion.conf
<Location /svn>
DAV svn
[code]...
View 1 Replies
View Related
Sep 2, 2010
I'm going away for the weekend and will only be able to bring my laptop that has the latest release of Ubuntu on it. My question is: will i be able to access my company's Terminal Server site [URL] from browser in Linux, and be able to launch the applications? (Outlook, etc.) Seems to connect to Windows Server 2008. If this works in Linux, that would make my life a lot easier..
View 2 Replies
View Related
Oct 18, 2010
I have Fedora Core 13 running. I have successfully (I think) installed squid, although I may have it configured incorrectly. I can ssh into the box from work via putty, but I can't use the proxy. I get a message "the connection to the server was reset while the page was loading" I can use the proxy from my home network, and have watched the tcpdump for port 3128 while using the proxy. I have turned off iptables completely (I'm not sure yet how to just allow squid)...
View 3 Replies
View Related
Jun 15, 2010
I installed pure-ftpd over ubuntu 10.04.
I want to know how can I remove authentication from ftp server to access in ftp directory from browser.
View 3 Replies
View Related
Aug 31, 2010
How can I run LAMP (Linux, Apache, MySQL, PHP) in a virtual machine (Ubuntu in virtual box) and make it so the web server is accessible locally (and ONLY locally) on the host OS via an ip address?
View 3 Replies
View Related
Jan 16, 2010
How to setup Dedicated Server for Web Hosting using Ubuntu Server or equivalent opensource Operating System? And how to make secured my Dedicated Server on public?
View 1 Replies
View Related
Jul 29, 2009
I am having trouble getting my FC10 with tomcat visible to the outside world. first off i am somewhat new to linux. I am running vmware workstation to host my linux web server. i have my VMWare setup to use my second NIC solely. it is bridged and the tcp/ip is disable from the host. i can ping the ip address but cant access tomcat on port 8080 from the outside. i can hit it fine from inside fedora. i have configured my router (wrt54gs with DD-WRT firmware) for port forwarding. so basically i think that the problem is somewhere in between the host and the vmware configuring allowing the port to be forwarded through.
View 2 Replies
View Related
Aug 6, 2011
I am trying to make my home server accessible to the whole web. I have installed Nginx on my Fedora 15 64-bit Linux machine, and it works with localhost but it doesn't work online or allow other computers on the network to access it via the IP address. It keeps coming back with: Could not connect
I have port forwarding. I have even tried different ports but they all seem to be blocked. What could be wrong? I have a netgear router.
View 4 Replies
View Related
May 30, 2011
I'm fairly sure that this is an Ubuntu issue, as I've tried this on my windows computer with success.I'm running a minecraft server on my laptop, previously over a wireless connection but the data rates were too slow. On a wired connection, however, the server starts up and runs like normal but the port is not open when accessing from the network's public IP. I tested this with canyouseeme(.)org. I can get to it from other computers within the network by using a local IP, which to me seems a little strange as it seems to indicate that the port is open on the PC but somewhere in the router it gets confused due to being wired(?). Obviously I've forwarded the ports on the router (BTHomehub 2.0) with both TCP and UCP (it worked over wireless!). Any suggestions as to what might be causing this? I'm stumped.
View 5 Replies
View Related
Mar 16, 2010
I am trying to setup a sendmail server on my dedicated server. It was pre-configured to use exim from cpanel. Is it possible to use exim for all emails from a a certain domain i setup on the server and sendmail for others?
ex.
domain1.com -> exim
domain2.com -> sendmail
If it is possible can someone let me know how i would go about doing this? If it is not how would i disable exim and use sendmail for all mail?
View 4 Replies
View Related
May 23, 2010
How do you configure the firewall to allow external web access (it's a LAMP server) and internal access for samba shares ?
View 6 Replies
View Related
Dec 23, 2010
I'm trying to limit access to port 8443 on our server to 2 specific IP addresses. For some reason, access is still being allowed even though I drop all packets that aren't from the named IP addresses. The default policy is ACCEPT on the INPUT chain and this is how we want to keep it for various reasons I wont get into here. Here's the output from iptables -vnL
[Code]...
Note the actual IP we are using is masked here with 123.123.123.123. Until I can get everything working properly, we're only allowing access from 1 IP instead of 2. We can add the other one once it all works right. I haven't worked with iptables very much. So I'm quite confused about why packets matching the DROP criteria are still being allowed.
View 10 Replies
View Related
Oct 20, 2010
LinuxA & LinuxB
linuxA:eth0(10.1.1.1) connected linuxB:eth0 (10.1.1.2)
linuxA:eth1(202.1.20.45) connected internet
[code]....
View 2 Replies
View Related
Nov 24, 2010
After installation Ubuntu Server 10.10 I don't know what to do next to access to the Internet.
View 9 Replies
View Related
May 10, 2010
I'm trying to set rxtxSerial to work so a Java app has access to a serial port (via SiLabs CP210x driver, port /dev/ttyUSB0). When I use update-alternatives --config java, there are 3 alternatives which provide `java'. I have tried openJDK and Sun. Both fail but with completely different messages.
[Code].....
View 9 Replies
View Related
Jul 10, 2011
I want to rent a (root) linux server to run a vpn service on it. I want to allow people to use this vpn.
My questions are as follows:
- What kind of server/service should I rent - dedicated or vps?
- Is one IP-Address enough to connect, say, 100 user? (I plan to run IPsec or OpenVPN, maybe PPTP)
- What Bandwith and/or traffic limits I need to consider to make the service reasonably fast for the users?
- Which Linux-distro should I use? Ubuntu Server, CentOS, FreeBSD, Debian etc?
- How much RAM and HDD space is recommended for such an endevour?
- Any advice on the processor type the server should have?
- Is 100M network ok or better 1000M?
- What means 100Mbps shared bandwidth in contrast to 10Mbps dedicated guaranteed per server?
View 4 Replies
View Related
May 18, 2010
I am trying to connect to my VNC Server from a Windows 7 Box running TightVNC:I've followed all the instructions on this page:[URL]And I changed my xstartup scripts:
/etc/sysconfig/vncservers
# The VNCSERVERS variable is a list of display:user pairs.
#
[code]....
View 12 Replies
View Related
Jun 18, 2010
Can anyone walk me through the process of increasing my max connection on my linux server?Over the last few weeks I have been getting errors saying I have to many connections.I think the default is 100 and I would like to maybe increase it to 150 or 200I know I cannot go to high because I will then be using to much of my memory or maybe CPU
View 8 Replies
View Related
