My server running on RHEL/Solaris went down of its own. I have rebooted the box and now the host is up. what are all the log files do i need to check to find root cause for this issue. I have already checked /var/log/messages and sar logs but not of much help.
View 4 RepliesI'm trying to rsync files and directories from a RedHat linux host(v 4.5 & 4.7) to a Windows server 2003R2 Standard Edition with cygwin running. I'm executing the rsync command from the cygwin shell. The transfer involves rsync'ing approximately 1 TB of data from the linux server to the windows server. After about 280+GB of data transfer, the transfer just dies.
There seems to be no particular file or directory that the transfer stops at. I'm able to rsync GB's of data from other linux hosts to this cygwin server with no problem. Files and directories rsync fine.The network infrastructure is essentially the same regardless of the server being rsync'ed in that it is GB Ethernet running through Cisco GB switches. There appear to be no glitches or hiccups across the network path.
I've asked the folks at rsync.samba.org if they know of any problems or issues. Their response has been neutral in that if the version of rsync that cygwin has ported is within standards then there is no rsync reason this problem should happen.I've asked the cygwin support site if they know of any issues and they have yet to reply. So, my question is whether the version of rsync that is ported to cygwin is standard. If so, is there any reason cygwin & rsync keep failing like this?
I've asked the local rsync on linux guru's and they can't see any reason this should fail from a linux perspective. Apparently I am our company cygwin knowledge base by default.
command to show the luns mapped to redhat enterprise server 6.1 host. And how do i known the WWNN for the FC HBA attach to the host.
View 6 Replies View RelatedMany of mails sent from my mail server that are in Queue;The main reason is deffered by domains like yahoo,aol,etc.but there is one more error that i keep getting and that is Host Unknown,Below is an example from mail log,The catch is,test mail sent on the same email id sent from my personal mail from the same server i.e. url was deliveredHowever,another mail containing client information sent from customercare@mycompanysdomain ended up in queue.
There are more examples of the same,around 20 domain have the same problem.
Sep 7 14:33:46 server2 sendmail[24591]: n8793jiC024589: to=<abc@xyz.fi>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=163672, relay=xyz.fi., dsn=5.1.2, stat=Host unknown (Name server: xyz.fi.: host not found)
Sep 7 22:09:42 server2 sendmail[6407]: n87Gdffa006403: to=<abc@def-fgh.com>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=152474, relay=def-fgh.com., dsn=5.1.2, stat=Host unknown (Name server: def-fgh.com.: host not found)
This is actually a question regarding RHEL 5.5. rather than CentOS but I understand they are very similar.With Solaris we use SMF to ensure that certain Java process are continuously running.If SMF notices that Java process has stopped it will run a start script, if we want to stop it, it will run a stop script.What could be use in RHEL?
View 2 Replies View RelatedI have an application running on a Solaris 10 server and I am getting the display on my Ubuntu notebook (10.04 lucid with kernel 2.6.32-23-generic and GNOME 2.30.2). But the problem is the fonts don't display well. So I tried to connect to the font server running on the Solaris server.
I tried all these variants:
xset fp+ tcp/<hostname>:7100
xset fp+ tcp/<hostip>:7100
xset fp+ tcp/<hostname>:/7100
xset fp+ tcp/<hostip>:/7100
[Code]....
I want to install Samba server to access a shared folder in Solaris box on a windows box
View 1 Replies View RelatedBit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.
View 1 Replies View RelatedRight now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?
i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB
if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..
Im new in linux i want to configure my redhat machine as both router and transparent proxy!
View 1 Replies View RelatedI want to know if the file "named.stats" exists in bind9 under solaris 5.8?
View 1 Replies View RelatedI have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies View RelatedI have been able to find enough information that I need to enable 'time-udp' in /etc/xinetd.d/ But there isn't an entry for time-udp. How do I enable time-udp (Time of Day server) on a Red Hat system? It's RHEL 5.6 64bit.
View 1 Replies View RelatedIcons Not Showing in GNOME desktop at REDHAT ES Server.Also no right click on desktop .No Action.
View 3 Replies View RelatedI got this type of messages:k journald starting. commit interval 5 seconds.EXT3.fs:mounted file system with ordered data modefreeing unused kernel memory : 212 k freed.Warning:unable to open an initial consoleAfter this Server is not hang state but stay at same Anybody can help me how to resloved this type of issue.
View 1 Replies View Relatedi had redhat version 5 server , i want use it as BTSN exchange can i used for this, and how
View 1 Replies View RelatedHow to install step by step to install bind server on RHEL 5.
View 3 Replies View RelatedIt seems that NIS/NIS+ and Redhat Dir Server/CentOS Dir Server have similar functions.
What are important differences between them?
I had Windows XP working. I then put in a new hard disk and installed Redhat 5 on it. rom then i could only boot into Redhat. Further, everyting is very slow. Anothe rproblem is that Redhat does not see my netwrok so I cannot get onto the Internet. I need to have the choice of booting into XP or Redhat.
View 2 Replies View Relatedwhat are necessary requirements to install ns2.can i install ns2 in redhat5v
View 1 Replies View Relatedhow to load tun in RedHat
Code:
uname -a
Linux server 2.6.18-028stab067.4 #1 SMP Thu Jan 14 17:06:11 MSK 2010 x86_64 x86_64 x86_64 GNU/Linux
Wanting to join my CentOS5.3 to a windows 2003 active directory. Configured kerberos and samba.
Code:
[libdefaults]
default_realm = domain
dns_lookup_realm = false
[code].....
My Redhat 5 Linux system is "SLOW". . . .My system is 250 GB hard disk, 4 GB RAM and Xeon Processor.Its really getting late to start all the services in the boot it self....Then it takes more than 5 mins to get my Username and Passwd screen....After i entered in to GNU mode its getting even more slower. . .it takes minimum 5 minutes to enter in to OpenTerminal. . . I tried top it is not useful. . .I didn't install any s/w recently
View 6 Replies View RelatedWhy my redhat can;t ping to other network( if ping to gateway is ok) and than i can use internet and resolve to dns. selinux status is disable and iptables is flush
View 2 Replies View RelatedWe want to begin centralizing our system logs to a dedicated server, using a daemon that is flexible and offers more features. After some research, I decided to give rsyslog a whirl (versus syslog-ng).roblem has come down to compilation errors which, unfortunately, I've not been able to resolve otherwise (rsyslog forums) and it appears this is a larger problem with the product. So before I begin making another decision, I wanted to get some input from others here.Here is a snippet of the errors:
Code:
/usr/local/src/rsyslog/rsyslog-5.4.0/runtime/queue.c:1291: undefined reference to `ATOMIC_SUB'
[code]...
Installation of CVS on Redhat linux
Installing CVS on Redhat Linux Redhat Enterprise 4.0
The following steps give simple steps to install CVS software on Redhat Enterprise Linux 4.0.
1) Download the tarball cvs-1.11.1p1.tar.gz
2) Run "gunzip cvs-1.11.1p1.tar". You will get file called cvs-1.11.1p1.tar.
3) Then extract this file using command
"tar -xvf cvs-1.11.1p1.tar".
4) Then go to directory cvs-1.11.1p1.
5) There you will find a file called INSTALL. Read it once carefully.
6) Now run the command "./configure."
7) Build it using the command "make".
8) Install binaries/documentation using command "make install".
9) Now open file called /etc/services and add the following lines.
Cvspserver 2401/tcp # CVS client/server operations
cvspserver 2401/udp # CVS client/server operations
10) Open file called /etc/xinetd.conf and add the following lines to that file.
service cvspserver
{
Port = 2401
socket_type = stream
protocol = tcp
wait = no
user = root
passenv =
server = /opt/bin/cvs
server_args = --allow-root=/home/cvs -f pserver
env = HOME=/home/cvs
log = /var/log/cvslog
}
11) Space on both sides of = in the above file is a must.
12) Restart xinetd services by running command " services xinted restart "
13) Check whether CVS is running on the port 2401 by using the following command "nmap IP |grep 2401". If the CVS server is running correctly it will give output as "2401/tcp open cvspserver ".
It doesn't output like "2401/tcp open cvspserver"
I have redhat cd's(total 5 cd's). I want to install RHEL4. My problem is that I am not sure that cd's are RHEL4 version. How can check the version of rhel using cd's?
View 5 Replies View Relatedthere is an active directory in our company , the AD's system is server2003 , now i wanna to make the redhat5 system to add AD.
View 1 Replies View RelatedCould you possible to install UDB DB2 8.2 install on redhat linux 5 .. what is the procedure please reply are send me the installation link..
View 2 Replies View Related# yum update Loading "rhnplugin" plugin Loading "security" plugin Skipping security plugin, no data Setting up Update Process Resolving Dependencies Skipping security plugin, no data
--> Running transaction check
---> Package stunnel.i386 0:4.15-2.el5.1 set to be updated -----> It hangs here and there is no further progress after this stage