What i want to achieve si simple (i think).
I have this shell command:
Code:
echo -e 'ka 0 00
' > /dev/ttyS0
and i want to execute it from html or php with a button maybe or a link.(it's a command to turn off the monitor)
I am running Ubuntu 9.04 desktop with apache and php installed .
already searched the forum but didn't find/understand how to achieve this functionality.
I have a web server in my kitchen with apache running on it. Since the upload speed is quite low due to my isp I would like to execute a bash script that uploads a file to another server through a website (which is htaccess protected) The idea in general: Someone with access to my website browses through a folder, copies a file path to an input form and presses "upload". Rather than executing a bash script directly I could have a cron job running in background that finds the path and then uploads the file to the other server I have userspace on and is accessible via sftp/ssh. The file would be than erased later after a couple of days or so. That person would be able to access the file with higher speed some time later without logging in via ssh and doing all that manually.
View 2 Replies View RelatedI wish to execute a shell script once a button on my html page is clicked.
View 7 Replies View RelatedSU results in Cannot execute bash: No such file or directory.
View 1 Replies View RelatedI want to execute a bash script in a C program. Bash script return some message and I want to store this message in a C program. Anybody know how can I do it.
I know I can use 'system("bash myscript.sh")' command in C. But I want to store the message which script return.
I'm playing with perl and found that I could just go:
"perl /home/me/bash_script.sh"
and it would execute, even though it's not a perl script. Is that just a feature or is there something I'm missing? Why does perl do this?
how to execute three processes by one script in bash.........in linux
View 1 Replies View RelatedI'm trying to start bash with a command and have it interactive like this:bash -i -c "echo Welcome!"As in, execute the command and allow me to use it as an interactive shell afterwards. (I'm doing something more complicated than echoing, but this doesn't work.)I've tried this from a running gnome-terminal, from one gnome-terminal to a new one withgnome-terminal and from the Alt+F2 program launcher (with "Run in terminal" ticked).
View 6 Replies View RelatedI am trying to process a column separated data file, with a few bash command. For example, I have
Code:
file1 aaaa yes
file2 aaaa no
file3 bbbb yes
Let say I want to create new file with the output of first column and do something else with the output of 3rd column. Of course there are many ways to process this data file, but I wish to know by using awk, how could I do it. I'm trying:
Code:
awk '{system("touch $1")}' datafile
but the shell command will not able to get the awk '$1' output. How do I get this done ? And for another question, if the data file contains the variable name of a shell variable, how could I make use of it during a awk output ? For example I have a datafile1:
Code:
server1 yes
server2 no
And in another server declaration data file, I got this datafile2:
Code:
server1=xxx1
server2=yyy1
And in my awk script, I want to achieve something like (the syntax is definitely wrong, just to demonstrate what I assume it will like):
[code]....
In my bash file I have asked to navigate to some subdir, unzip a file and stay there but when I type pwd I can see i'm always back to home dir.Any way to get shell stick to subdir?
View 4 Replies View RelatedAll of a sudden,i can't execute a simple script as follows:
exit 0
and:
exit
I have a computation going which takes a long, but uncertain, amount of time. I have another computation which needs to be run, but _after_ the first one is done. I won't be at the computer at that time to manually start the new process. I've done some Googling, and I found how to delay execution by a specific amount of time (e.g. "start process x in exactly 8 minutes from now), but that isn't quite what I want to do. Essentially, I'd like to tell the shell, "When process #nnnn finishes running, then start process x". Is there a way to do this?
View 6 Replies View RelatedI just installed amanda-backup_client-2.6.0p2-1.rhel4.i386.rpm on my Red Hat Enterprise Linux 4 system. But I don't know who to check if it successfully installed or not. When I try to run amrecover from root, I get:
-bash: /usr/sbin/amrecover: cannot execute binary file
I have some bash and python scripts. Is there any way to encrypt them but still be able to execute them encrypted?
View 7 Replies View RelatedI downloaded a program called tonespace http://www.mucoder.net/en/tonespace/ which I extracted and then tried to execute the executable file with ./tonespace. This gives me the following message:
bash: ./tonespace: No such file or directory
When I use the command: file ./tonespace I get this: tonespace: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.15, stripped
I dont get it. The file is clearly there, yet when trying to execute it bash doesn't seem to recognize it.
It has permissions rwxr-xr-x and is not owned by root. Am I overlooking something?
Everyone knows that it is like impossible to use mplayer to watch an *.html file. OK.
For instance here is a cool example of lot of streaming for firefox
http://watchtvlivestreaming.com/tvlive/b5499
Code...
Anyone is there a talented bright coder, coming from hell -because it is really difficult, to make such console program ?
I am facing problem on executing commands like df -h,ls-l,grep etc in /bin.
it is showing below errors:--
----------------------------------------------------------------------------------
login as: root
root@220.226.102.217's password:
Last login: Sat Jun 4 11:14:20 2011 from 220.227.54.149
-bash: /bin/egrep: cannot execute binary file
[code]....
I have a big bash script ,its goal is to download movie one by one . But I often get into a problem: if this script is executed in cron,it often does not completely download the movie.I often find the movies it downloaded are several KB while the movie is actually 20MB.So I think it is because it did not wait for finishing one task ,and jump to download another.So I want to know ,is there a way to force the bash script to wait until one movie downloaded completely and then start to download another movie ?
View 8 Replies View Relatedi have purchased sun server for my visualization project. Request you to help me finding the io for disk .I have put storage(disks) on different location (File Server) and on server (Application) i have configured 4 virtual machines.
How would i monitor the io for file server from the Application server where i have configured 4 virtual machine. one way to mount the file server share on application server and execute
dd if=/dev/zero of=/share/test.out bs=1024 count=1024 to check the read and write Is there any other way of doing this.
I was trying to have access from a browser to the squirrelmail configtest page in my server, making some changes, I accidentaly remove the directory webmail. After I replace it with a backup apache2 can not start. This is what I have. Syntax error on line 281 of /etc/apache2/apache2.conf: Syntax error on line 1 of [URL].. closed. But I am sure there is a ?> at the end of this file.Base on what I read on [URL]...-with-the-tag/ I test without the ?> also, but I got the same error.
View 2 Replies View Related\Actually i lost the login details of my server so im recovering it in rescue mode.what i want to ask here is if i restarted my server what i need to do in order to work as it was before.on my server samba and dhcp server is configured.will my client users can access there network if login page comes or i need to do something else such as restarting services or not.
View 1 Replies View RelatedI'm moving an office intranet server to a new machine running CentOS 5 with apache 2.2.3. Everything worked fine on my old CentOS server and nothing new or fancy being tried on the new machine: default server, no name virtual hosts etc.. However, on the new server I can only see the index.html page when I browse to it. Index.html is a frameset which calls other pages to load from subfolders to /var/www/html. The frameset loads but in each frame I see "The requested URL /hot_stuf/data_colm.html (etc.) was not found on this server.".
View 3 Replies View RelatedOn FC11 64 bit with Adobe flash plugin for Linux installed, I see segfault errors from "npviewer" in /var/log/messages. The only browser I have tried yet, Firefox, has glitches every now and then. Sometimes it shows the title of a page in a tab, but the page is blank. This can even happen when I try the Google main page. Is it true that npviewer has something to do with Adobe flash? Is there a way to fix the problem? If it is caused by Adobe flash, is there a different plugin that will replace Adobe flash player?
View 1 Replies View Relatedi am able to try ubuntu and everything works fine until i try to install. the menu comes up to the first page where it tells you to plug in your machine and make sure there is enough disk space and network connectivity. when i hit next on this page the mouse icon changes but the next page never loads. the longest i let it hang there was 2 hours. ive tried multiple times with the same result.
im running from a flash drive on an ASUS Eee PC 1001P-PU17
How can I find page hit and page miss ratio in linux fedora core 12?
View 3 Replies View RelatedI have a problem printing to my HP printer.
What is my problem? I have a page (one page - text an graphic) to print. When I sent it to my printer it prints OK. When I sent it agian, the output is totally garbled. When I sent it again (a third time) it is OK. Sent it again (4th time) it is garbled. Sent it again ... you get the picture ;-). Alternating good and bad pages.
What is my setup? I run Fedora 14 with Cups 1.4.6. The printer is a HP Deskjet 940C. It is connected to a linksys wireless print server. It is configured in CUPS to use ipp printing. The driver I use in Cups is 'CUPS+Gutenprint v5.2.6 Simplified (color, 2-sided printing)'.
I have apache httpd server on my Fedora 10I got 2 problems:First : I copied the web page files to its Document Root <var/www/html> & Disabled the default web page. But when I visit http:/localhost ，it shows up the list of files in <var/www/html> as if a ftp server browsed in web page. So how can I set http://localhost load my default web page index.html ?Second :I want to set up a web server on Internet through my router . I applied for DDNS account & input it into router correctly . I set virtual host in server to redirect any access from port 80 to 192.168.1.2:80 in LAN . Just for in case , I also download and running the DDNS software & installed it on PC 192.168.1.2 in LAN . My DDNS provider is oray.cn . It's a Chinese server provider . I don't think there is anything wrong with oray.cn . But if you need its information just visit oray.cn (Google can translate it for you). So I want to know did I miss something to set up a web server in this kind of situation
View 2 Replies View Related10.04; 64 bit In Firefox, the size of the fonts varies greatly from site to site. Some are too small to read, others huge. Some headings and menus overlap.Screen size: 1152 x 864
My settings are:
Proportional: serif 14
Serif: Times New Roman
Sans serif: Arial
Monospace: Courier New 14
All has been fine with my emails but today morning when i tried to log on I got an error message "You must be logged in to access this page, go to logon page" I dont understand why even when i supply my correct user name and password.
View 2 Replies View Relatedwanted to know if i can execute commands on linux console through a web page and redirect it back to my web page !For example :if i send a query "ls"it should execute this command on my linux console and also redirect the list of the files to the web page from which i give the command !
View 8 Replies View Related
