I am configuring a proxy server in my desktop, which in turn passthough a proxy ( parent proxy ). I have added following line for this
cache_peer proxy.tcs.com parent 8080 0 proxy-only default
But for parent proxy, we have to specify username and password in this line, I am confused here.
login=userassword | PASS | *assword
Here where I have to enter username and password ?
Is there a way to SSH into a server (my home computer) from behind a proxy that has a username and password? I read about corkscrew, but I was wondering if there is a simpler way.
View 1 Replies View RelatedI'm trying to use Kubuntu 10.04 in a corporate environment. Our environment uses an internet proxy that requires a username and password.Under Ubuntu 10.04, I can use the GUI to set the proxy host, port, username and password. When I do this, all the web browsers work, Snyaptic works, etc.However, under Kubuntu 10.04, the GUI lets me specify a proxy host and port, but doesn't appear to save the username and password. Because of this, I have to manually set the proxy information on my web browser, but the package managers don't work because they can't access the internet. Apparently the ability to specify proxy username and password is either broken or unfinished.
View 4 Replies View Relatedi am after proxy server, i add the proxy server access username and password
[Code]....
it said the export is succecefully done, but after trying to install something using yum, its give me this [root@locVirtual-linuxtest etc]# yum install samba
[Code].....
I bought a firefox extension which support proxy with username and password, but seems only http version and not socks 5 server which I already have installed on server. I know for privoxy, but privoxy don't support username/password. Is there anything else what works with username/password? Also what is different between http and socks5?
View 3 Replies View RelatedI followed this guide: [URL] and restart the Squid Server with no errors but when I try to SSH into it:
Code:
ssh -L 8080:squidserver:8080 user@squidserver
It just hangs there for a long time, not timing out and eventually (after a long wait) I get this:
Code:
ssh_exchange_identification: Connection closed by remote host
What could be the problem? I can SSH normally into the computer, but not into the proxy server. Do I need to forward the 8080 port on that network?
I followed (partially) the config file that was displayed on the squid site (here: Clickety) after I had joined the server to the domain. this is with CentOS 5.5 and Squid 2.6. This is my squid.conf:
[code]...
The idea is to block all users not in the AD security group "InternetUsers" from accessing the internet. When I try to start the squid service it fails and checking /var/logs/messages it reads:
[code]...
i must make this work with the use of virtual pc's. I have vm player and installed fedora ( the latest version ) and one xp . So i have 2 virtual pc's. I'm making it simple for start so i can add more pc's when i see that it is working. I have setup a dhcp server at the fedora virtual pc. The fedora virtual pc is like a soho router. The xp pc is getting ip from dhcp while the fedora one has a static one.
My pc is behind an adsl router. Both virtual pc's can see each other which means i have no connectivity issues.Im trying to setup a squid proxy ( transparent one ) so for example the xp pc can access porn sites and such. I used all required configuration for the squid to work and started the service. Ive also inserted with iptables the commands to forward all incoming port 80 packets to port 3128 ( the squid ). It doesnt seems to be working and i thik i know why but i dont know how to fix it.
Because the xp has a gateway at 192.168.1.1 ( the adsl router ) packets go directly to it and not to the soho router ( fedora virtual pc as i intend to do) What can i do to solve this problem ? How can i forward all packets to go to the fedora virtual pc first and then the fedora pc to forward them (if necessary) to the adsl router? PS. I used Bridged connection on the networking configutration on the vmware player ! If you also want i can post the code for squid or iptables if needed !
I my office I have configure dhcp in my centos sever
eth0 for adsl-setup
eth1 for lan 172.16.0.4
I am using squid proxy server for internet access,
in my office all are using laptop through wifi , so i need to configure the browser proxy setting for accessing internet.
is there any way to setup automatically get the proxy setting as dhcp. I have tried transparent proxy but no success.
i configured chpasswd on my RHEL 5 so that my squid users can change there squid password when ever they want.But i am unable to use this Functionality. How can user access it on there web browsers to change there password.my squid, Sarg ,webmin as well as chpasswd are installed on my server 10.135.90.200. How can user refer to this server so that change password screen comes on his browser.
View 1 Replies View RelatedI would like to install and manage SQUID Proxy Server using command line in Ubuntu 10.04 Server.
View 1 Replies View RelatedI would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedCurrently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter
ddns-update-style interim;
ignore client-updates;
[code]....
I am trying to configure squid with Fedora 10 to use it as a transparent proxy webcache.Is there any good tutorial you would recommend to a novice?
View 1 Replies View RelatedI have 4 servers running squid/3.1.1 proxy server. Since the latest version I can no longer FTP. I have posted this problem in multiple places but have received almost no response. I've found several other post to this problem throughout the Internet which have also gone unanswered. So, once again, I thought I'd give it a try. As I said "I have 4 servers running the newest version of Squid". When I try to access an ftp, any ftp, I receive an error (check attached image). This was never a problem until just recently. Squid should work perfectly find with ftp, it is not a strictly http proxy.
I turned my firewall off just to make sure, still had the same issue. If I jump directly on the server itself with no proxy settings set in the browser it will work fine. As soon as I set the browser setting to access the Squid software I get the same error. I've included my squid config (which is unchanged from the default settings), maybe somebody better versed than myself can point out an obvious flaw. Everything else seem to work just fine, it's only FTP that's a problem.
I have a reverse proxy set up with squid. I'm going to try and explain what it's doing and I apologize for it being confusing, I'll do the best I can to describe my problem. First, it's for our phone system. We run a ShoreTel Voip system. The owner has decided he wants me to setup MCM (Mobile Call Manager), which from what I can see is an under developed, and almost impossible to get help with Shoretel software. But he's convinced he needs it for his Iphone. It's supposed to, in a nutshell, turn his Iphone into his work phone with all the advantages and doodads that come with it. Apparently, "they have an app for that". On the server side, I need to setup a reverse proxy back into the network on our phone server. Simple enough, I did this with squid. I used the following lines:
Code:
http_port 80 accel defaultsite=172.17.137.7
cache_peer http://172.17.137.7 parent 80 0 no-query originserver name=myAccel
acl our_sites dstdomain http://172.17.137.7
[code]....
Code:
always_direct allow all It most definitely is allowing traffic back to the phone server, the problem is, it hands out my internal server address to the outside client. So for instance, if I connect to the outside routable address with my phone, it will immediately change the url to http://172.17.137.7 which is the inside nat address of my phone server. Which of course doesn't work, since I couldn't browse to that address from the outside. It does however work from the inside of the network, obviously because 172.17.137.7 is accessible from the inside.
I've problem with configuring transparent proxy on Fedora v13 was checking with several examples, last one from here on router (cisco 1812) everything seems ok, think there is a problem with Linux
Squid machine and router 'see each other'
Code:
While try to open web page, on GRE there is:
Code:
But when want to see what hapenning in tunnel between router and squid - there nothing...squid configuration is ok - was checking before try to make it transparent.
I am not sure whether it's possible or not. We running squid proxy server for our office. We restrict users using ACL to access the internet. There is some who do the followings:
1. Create a own proxy in there box who has the internet access.
2. Other users use those box as proxy and access to the internet.
My skill in fedora linux is all acquired by reading online and trial and error. I manage to set up my squid 3.0 proxy server in fedora 11. It is working smoothly as I wanted it to be. I have one client who is running bittorrent that drags all the bandwidth of our network.The problem is I cant make my server work tranparently. I want to make transparent proxy so that it can support my wireless router and I want to control the bandwidth to a fair level for everyone without them knowing.
Please somebody help me configure iptables in step by step, specifically in fedora 11. And all other necessary configuration needed to run my transparent squid 3.0 proxy in fedora 11.I know there's a lot of Linux Genius here that can help. Please help me I needed it badly.
I am using Fedora Core 9.0 and Squid Cache: Version 3.0.STABLE2 .
Now i am trying to use the squid as a proxy server but its not working its giving error like this ...
While trying to retrieve the URL: /
The following error was encountered:
Invalid URL Some aspect of the requested URL is incorrect.
Possible problems:
Here is my squid.conf
While trying to retrieve the URL: /
I have also try to forward the traffic coming on 3128 to 80 but its not working:
when i started phpmyadmin by localhost/phpmyadmin ..it ask a username and password ....so i know password will be of mysql but what will be the username when..bcoz when i installed mysql it only asks me the password ...it doesnt ask any username to enter at that time
View 3 Replies View RelatedI have configured router(192.168.1.2) to serve only one machine with IP - '192.168.1.6' and set up SQUID proxy on '192.168.1.6'. I have defined some rules(ACL) regarding connections to internet on SQUID proxy.
I changed the Gateway of rest of machine (192.168.1.60 - 192.168.1.69) from '192.168.1.2' to '192.168.1.6'.
The policies which I defined in SQUID is working properly but 'Linux Evolution mail' client is not fetching mails.
Is I have to do any other settings on 'Linux System' or 'Evolution mail client'.
I've been using checkgmail package on my f10 (x86_64) box for a while now without problems. But all of a sudden, I see a pop-up windowtating: incorrect username or password. No matter how many times I enter my usernamend password the window keeps coming back demanding for the same. My system is up to date and I've rebooted my system a few times, but the problem persists.
View 2 Replies View RelatedPulled out my old pc for the first time in about 18 months, which has fedora core 6 installed on it, tried everything but i cannot remember my username and password
View 1 Replies View RelatedWhat I go to logon to my online school, the username and password windows look to be out of wack (see attached). This behaviour is only seen with Fedora and Firefox. Is there anything that I can adjust
View 2 Replies View RelatedHow can i create folders in linux? so far i have created the folders i need using mkdir /home/computer now what i need to do is create five more folders but each folder sill have their own username and password
View 6 Replies View RelatedJust started happening this week -- I boot into a terminal (no GUI by default, but I use GNOME when I need it), and when I'm asked to login, I type my username <ENTER>, then I'm prompted for my password...
And the password is now echoed to the screen in cleartext. as I type it
Haven't changed any settings (although I have been keeping up with the updates).
I've searched the forums, and the occasional new user will complain nothing shows up in the PW field which is the expected behavior. Unfortunately, I have the opposite behavior -- something shows up, and I don't want it.
I have a system installed fedora 13 which I have updated yesterday. Now when I am trying to start system it restarts immediately after entering the user name and password. I am not the expert user.
View 1 Replies View RelatedI have installed F11 and i found difficult toonnect to the internet where as in the windows its working fine. I am using BSNL Broad band connection.A username and the passwrod is given
View 1 Replies View RelatedI have installed phpMyAdmin on Fedora 11 using YUM, along with MySQL, PHP and Apache. The web and database servers are operating fine. However, when loading the web page [URL]... a box appears asking for a username and password. I have tried many combination's including the root with no success. What value does it want, or what setting is wrong. In studying the file httpd.conf in somehow loads the file phpMyAdmin.conf
[code]...