So I found many methods on google, but no one works. It seems that this one is THE Debian way.
Code:
### BEGIN INIT INFO
# Provides: mystartupscript
#[code]...
I'm trying to reboot the server (shutdown -r now).But it seems like nothing happened.
When I try "shutdown -c", the system prompts "shutdown: cannot find pid of running shutdown."
I am facing the issue that the PC not capable to shutdown or reboot; In order to debug that, htop tells me the running processes but all seems normal, I killed few but still cold reset is needed.There is certainly a problem somewhere. the best would be to know which process are weirdly hanging. It could make this testing debian bit better to know which package has these issues.
View 1 Replies View Relatedi have fresh installed debian wheezy xfce4, and using slim to start it but i can't get reboot, shutdown and thunar can't open flash and others volumes. i using .xinitrc (exec ck-launch-session startxfce4)
View 3 Replies View RelatedI've added entries to my Openbox menu labeled Reboot and Shutdown. Problem is, reboot and shutdown h only work as root, and I never login as root. I've tried su-to-root -c reboot, but the menu entries remain unresponsive. I do not have sudo installed because I feel it is a security issue. However, I found that sudo reboot works with the menu entry, but only if my account is set to use sudo without a password in /etc/sudoers. I use tint2 as my panel, but have had no luck with finding a shutdown/reboot button.
View 4 Replies View RelatedFurther to this LQ thread which Tinkster solved by suggesting the last command (thanks Tinkster) I have been exploring last -x reboot and have found that the reported duration is incorrect for the last reboot and shutdown when a old wtmp file is used. Not having a record for the following shutdown, last assumes that the system has been up until the current time and similarly for the shutdown.
The output comes in time order, latest first, each line showing the time of the reboot and the uptime from then to shutdown. Using last -x reboot shutdown to show the shutdown time, here's an illustration
Code:
shutdown system down 2.6.29.6-smp Sun Mar 7 15:35 - 03:02 (11:27)
reboot system boot 2.6.29.6-smp Sun Mar 7 09:35 (05:59)
09:35 until 15:35 is 05:59.
When the uptime exceeds 24 hours it is shown as (<days>+<hours:minutes) like this
Code:
shutdown system down 2.6.29.6-smp Sun Feb 21 12:39 - 13:20 (00:40)
reboot system boot 2.6.29.6-smp Sat Feb 20 09:39 (1+02:59)
09:39 until 12:39 the next day is 1 day 02:59.
The time in parentheses at the end of the shutdown lines is normally the time until the next shutdown.
So far so good. The incorrect output is for the last reboot and shutdown of an old wtmp file. Here's the output of last /var/log/wtmp -x reboot shutdown; last -f /var/log/wtmp.1 -x reboot shutdown
Code:
[snip]
reboot system boot 2.6.29.6-smp Fri Mar 12 07:42 (01:54)
shutdown system down 2.6.29.6-smp Fri Mar 12 01:31 - 09:37 (08:05)
wtmp begins Thu Mar 11 08:25:26 2010
[snip]
reboot system boot 2.6.29.6-smp Wed Mar 10 14:12 (15+01:42)
shutdown system down 2.6.29.6-smp Wed Mar 10 12:41 - 15:54 (15+03:13)
[snip]
The boot started at "Wed Mar 10 14:12" which had an actual uptime of 1 day 11:20 is reported as 15 days 03:13 which is the time from then until the last -f /var/log/wtmp.1 -x reboot shutdown command was issued. The time from shutdown to shutdown is similarly affected.
Every shutdown/reboot always hangs on
Code: Select allkvm: exiting hardware virtualization
I have tried rebooting/shutting down with
Code: Select allshutdown -h now
reboot
shutdown -r now
halt
init 0
init 6
And all hang on the same line. This is 100% reproducible. I am not actually running a virtual machine. I don't have qemu-kvm installed. I do have separate partitions on my system. I have a /boot, /, swap, and /home partition.
From looking at other posts: [URL] .....
Solutions tend to be across the board: not unmounting properly, acpi settings in grub, using a different shutdown command.
My fstab file is:
Code: Select all# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
[Code] ....
and the result of Code: Select allmount is
Code: Select allsysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,relatime,size=10240k,nr_inodes=498135,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,relatime,size=800408k,mode=755)
[Code] ....
How to run a script/command before shutdown/reboot in Debian Jessie.
I created a script myshutdown.sh in /etc/init.d/ to shutdown rTorrent if the reboot or shutdown now -h command was executed.
#!/bin/bash
#rTorrent Shutdown Script
echo "Shutting down rTorrent!"
kill -2 `pidof rtorrent`
I set the file as executable.
sudo chmod +x /etc/init.d/myshutdown.sh
I inserted a symlink in the rc0.d directory with the process order K04.
sudo ln -s /etc/init.d/myshutdown.sh /etc/rc0.d/K04myshutdown.sh
I also inserted a symlink in the rc6.d directory with the process order K04.
sudo ln -s /etc/init.d/myshutdown.sh /etc/rc6.d/K04myshutdown.sh
Apparently rc0.d is for shutdown and rc6.d if for reboot
After reboot it appears that rtorrent does not run (I cannot connect to rtorrent via rutorrent) but really what is going on. I am trying to do this because rtorrent does a hash check on all files if it is not shutdown properly. I just want it to shutdown automatically and safely, before the system shuts down.
Every time I reboot or shutdown my PC, the login window shortly pops up. The PC does shutdown or reboot normally afterwards. When I use the terminal to shutdown/reboot (sudo shutdown -h now or sudo reboot) all goes well. The PC is running Debian Squeeze with the GNOME desktop environment.
View 7 Replies View RelatedCome across with a situation where all methods of shutdown result in a restart/reboot? I've tried commands:
- shutdown
- halt
- poweroff
.. with various parameters, nothing works. The laptop seems to power off, but after a sec it restarts/reboots. I've Googled high and low, but there's very little on this topic. Maybe it is specific to the current kernel in Wheezy? I'm not suspecting a harware failure, since this was not happening with Windows installed.
This happens on me with Wheezy on a HP Elitebook 8530w.
I have to use pppoe because my ISP uses service names, and as far as I know the only program which lets me input a service name is pppoe (inside the pppoe.conf file). Networkmanager is buggy because it tends to disappear from the panel periodically and, worse, it doesn't reconnect (although the option is selected, it does reconnect only once).
So, for peace of mind I open a superuser terminal and enter "pppoe-start" and "pppoe-stop" to have everything I want (reconnects automatically, etc.). Now the question is: how can I have pppoe-start run at startup, automatically, without entering superuser mode, and without having a terminal open for this? Using Debian Testing (Wheezy).
I cant shutdown without running sudo shutdown. When I try to use the default gnome shut down it takes me back to the logon screen. Fresh install today and I've had the same problem on other installs.
View 9 Replies View RelatedI have a script that needs to start executing on startup. Because I originally wrote it for MacOSX I never cared to learn how to daemonize it (thanks launchd!). Are there any relatively easy ways to run it on startup on debian to?
View 2 Replies View Relatedrunning Debian Squeeze (standard 32bit squeeze Kernels linux-image-2.6.32-5-486 and linux-image-2.6.32-5-686) happily without trouble on a 64bit capable Samsung laptop featuring an Intel T3200 Dualcore processor. However, when I try to boot using the squeeze 64bit kernel (linux-image-2.6.32-5-amd64) the system proceeds through a few text lines immediately after Grub, and then performs a warm start.
The text output I get immediately after Grub look similar to the ones I get booting the 486 and 686 kernels, without any indication for the reboot behavior. The rebooting also seems to happen before any entry is written into the boot/system log files (logging is enabled). This behavior also occured when I first tried to prime the machine from the Debian squeeze install CD using the amd64 kernel. I'm generally happy with the 32bit kernels, but I'd like to use the amd64 support to do some Java compatibility testing for 64bit architectures.
The Laptop is a Samsung R510-Aura T3200 Delfina with the following Hardware and Setup (using Grub as boot loader):
- Intel Pentium Dual CPU T3200 @ 2.00GHz (see http://ark.intel.com/Product.aspx?id=37160 for details)
- NVIDIA GeForce 9200M GS
- 3GB RAM + 1GB reserved for GeForce
- Konfiguration Details:
-- Phoenix Bios
[Code]....
Maybe a strange BIOS-Setting that works with the 32bit kernels but not with the 64bit kernel? I've seen a post on here that indicates someone is running the amd64 kernel on a T3200 successfully, and the chip is definitely 64bit capable, so the reboot behavior is a complete mystery for me
I'm using Slackware 13.1 on my laptop, and sometime ago it make some beeps on shutdown, and when I don't find any word on a page on Firefox(using the find tool on Firefox).
View 2 Replies View Relatedrunning fc10 in a vmware setup Added /etc/sysconfig/network-scripts/ifcfg-eth0:0 to create another interface and all works fine (IPADDR=10.99.56.98). Would you expect this to be available after a reboot, last reboot I had to run ifup eth0:0
View 7 Replies View RelatedI'm having a real problem getting Apache to allow a symlink on a particular folder. The symlink is at /var/www/html/images and it points to /home/foo/images.Here is the relevant section to my httpd.confQuote:
<Directory />
Options +FollowSymLinks
AllowOverride None
[code]....
i am trying to make it so that my laptop that has crashed can run Ubuntu. It lacks an optical drive (CD Player) so i am trying to use a USB. After i downloaded the ISO, and then use the extractor like it says here I then went into the flash drive, went to [usb-creator.exe] The problem is that when i try to do this (make the USB the Startup disk) the iso refuses to load on the application, its hard to explain, but here's a picture. Even when i go to click other, browse for the ISO, and open that one, it still doesn't work.
View 3 Replies View RelatedI'm having difficulty making Autokey start at startup. I use the startup applications utility but don't know how to use it properly. I guess that I'm supposed to navigate to Autokey's executable but don't know where that is or if it exists because I don't understand the file system.
View 2 Replies View RelatedI have recently upgraded to the 10.04 Alpha and have been unable to reboot or shutdown. I know it's just an alpha and therefore problems are bound to exist, so I tried reinstalling from a live cd of Alpha 3. But I am still unable to reboot or shutdown.To clarify what happens, I click on shutdown or reboot, the pop-up appears, I click on the shutdown/reboot button and it seems to complete it. It says that processes have been killed and something has exited with 255. But my computer is still on. I am guessing that Ubuntu is shutting down, it's just not actually shutting my computer down or restarting it.
View 5 Replies View RelatedI have a remote server (Xubuntu 10.04) which suffered an electricity brownout yesterday. The server itself is backed with an ups, but it is connected to a external firewire disk, which is not, and this disk malfunctioned as a result of the brownout.
The problem: Now, any process trying to access the external disk freezes and ends up in eternal D state in the process list, including ls and umount. Even trying to ls a directory which contains a symbolic link to a file in that drive just causes ls to freeze. These processes cannot be killed even with SIGKILL, so I proceeded to reboot but...
None of the reboot commands work. Instead they just get added to the ever increasing list of D state processes. I tried (sudo) shutdown -r now, reboot -f now and finally plain shutdown -h now. Is there anything else to try other than ask somebody to actually go to the server and pull the plug (which is not at all trivial)? Some way to tell kernel not to worry about messing stuff up, and just reboot?
we've just bought 30 newest nettops ACER Aspire R3700 with ION 2. I've tried ubuntu, kubuntu, xubuntu. Everything works as expected, but... the first one freezes when trying to reboot, shutdown or enter sleep mode. Checked on several hardware units. The desktop just freezes and nothing happens (ubuntu 10.10, both x32 and amd64). Also no one installs the wi-fi drivers, only ethernet
View 4 Replies View RelatedNatty won't shutdown for me - the start up/shutting down graphic comes up and the 'light' go down from 5 to 3 then it just hangs there.
Is there a shutdown log? I've looked in /var/log/messages but there's nothing relevant there.
From a 11.04 Ubuntu, I installed the meta-package xfce4 (*). Now, in the xfce4 session, "suspend" and "logout" (from the xfce4-panel button) works, but "shutdowmn" and "reboot" not, they only lead to GDM. (the shutdowm option there works.)
I tried to solve that by installing the meta-package "xubuntu-desktop" (maybe there are some necessary settings included?), and in fact, the login-screen changed (it's still GDM, I suppose) and there is now a "xubuntu" session, but in that, the probem is just the same: shutdown only leads to the login screen.
In Gnome Classic or Unity, shutdowmn works as it shoulds, so it's not a general problem with my computer.
In Detail, in forst tried to install xfce4 with ubuntu-software-center, but although it seemed to succeed, there was no xfce session. In Synaptic, installing the xfce3 metapackage worked. In fact, software-center seemed to have overlooked some dependencies...
I cannot figure how to make a program start-up when Ubuntu boots. I want the "sudo firestarter" command to run so the firestarter icon appears in the panel.
View 7 Replies View Relatedis this a bad copy to my flash drive error or a bad iso altogether?
View 1 Replies View RelatedRecently I installed Fedora 12 64bit in my HP Compaq 6720s. Among many other problems that I had and I solved with your help, I have the following problem:When I restart or shut-down Fedora 12 it crushes and hangs and only thing that I can do is to stop and restart my laptop by means of ON/OFF button.My question is:Is there any way to see this error (maybe some log file or something) so I can send this message or log file here in this forum and get some help?
View 1 Replies View RelatedI hoping someone can point me in a direction. I installed F13 KDE from the live cd and now when I Shutdown or Reboot, it takes 2 minutes and 8 seconds for the machine to power off. Yes, I timed it.Happens everytime like that. Even when booting from both "mainstream" live cd and the KDE spin live cd. When I hit the Shutdown or Reboot, it goes through the daemons/services shutdown the flashes up the Halting System or Please wait while the system reboots messages (respectivley), turns off the LCD and then just... sits with the power light on and hard drive activity light on. I should mention this is on a Toshiba Laptop about 2 years old now. Intel Chipsets. (Satellite Pro S300M-S2142 if anyone is really curious). The hard drive light stays on for about 1:03 minutes and then it turns off, at 2:08 minutes - the Power light finally turns off and the thing finally shuts down or reboots. If this sounds familiar, it's because it is and I've posted about it with F12 and it's still there with F13. Running kernel-2.6.33.3-85.fc13.x86_64
View 1 Replies View RelatedAfter a couple of days, some commands related to the disk (df) or files (ls) or killing process (kill -9) doesn't respond. Even I can't reboot or shutdown my server. After an hard reboot, some files are not here anymore or the log files are not filled anymore until I restart.My disk are behind the RAID controller i6 and are configure in RAID 1. The disks are two HP SCSI 72,8GB 10k RPM.Maybe I am totally wrong to check the disk access side, so I am open to other explanation.I can also add that my CPU is running under 1% et my RAM under 10%.
View 14 Replies View RelatedI don't follow why the Suspend option is there and the Reboot and Shutdown is not. Can anyone guide me to the code needed to add the selections. I know I can use a Terminal to shutdown or reboot but a simpler solution would be nice. I expect there are methods to fix most of what I don't like about Gnome 3 but I haven't found them yet. Is there a central place for the solutions needed to deminimalize Gnome 3? I really prefer one click control.
View 4 Replies View Related