My SSL is not working, I get the error I just moved my site off GoDaddy, and on to my own server. I now get this error message. "SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long)"
I'm not sure what that means, or how to fix it. I used these same Security Certificates om my other server, and they worked just fine.
I've setuped apache2 with SSL on Debian Etch, but I'm getting this Error message in the browser:
Code:
This site does not exist!
I am trying to configure test site with https mod_ssl for a few days with no success.
Now I got this message:
And this is second day I can't move on. I try to config https site on my localhost in order to test functionality and etc.
I get this as output in curl
Code:
We could not access our web site page on firefox or chrome or ie:
Firefox give us these error:
We also try on linux with wget to access it:
Here is the result:
Recently I got a very rare database issue, it says: Error: Couldn't read status information for table clients_copy () mysqldump: Couldn't execute 'show create table `clients_copy`': Table 'adm_retail.clients_copy' doesn't exist (1146) Error: Couldn't read status information for table dt_mx_emp ()
[Code]...
If I have a hard-disk with Ubuntu fully installed on it and I want to - all of a sudden - use Windows XP, is it mandatory that I firstly format the hard-disk first? So far, I have used two versions of Windows XP; one of them is from a few years before the other. Both copies of Windows XP when in start-up from booting from CD are causing errors. One of them is a BSOD error (0x0000007B) and the next Windows CD is stopping and giving me an error with setupdd.sys (error code 4). Is it required that the hard-disk is formatted before you even put a Windows boot CD in?
View 2 Replies View RelatedI'm trying to sync a folder between my Windows install and my PCLinux install. Same machine, Windows 7 on the C drive and Linux on an external USB hard drive.
Using the Grsync GUI, I searched for the source and destination folders, and then executed the command. Here is the output:
** Launching RSYNC command (simulation mode): pkexec rsync -r -n -t -v --progress -s /media/Win7/Documents and Settings/Paul/Application Data/The Word file:///root/.wine/drive_c/Program Files/The Word/myData
ssh: connect to host file port 22: No route to host
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: unexplained error (code 255) at io.c(601) [sender=3.0.7]
Rsync process exit status: 255
It seems to be doing an FTP operation, whereas all I need is a file transfer. Can anyone point out my error here?
simple scan error as follows: Failed to save file ImageMagick returned error code 11 Command line: convert -adjoin /tmp/simple-scan-DA9MBV.jpg /tmp/simple-scan-XCK4BV.jpg /tmp/simple-scan-NZVYBV.pdf Stdout: Stderr: using karmic note: I have apparmor extra profiles installed but didn't notice one that related to simple scan or imagemagick. Red herring or not?
View 6 Replies View RelatedI have just upgraded my ubuntu to 11.04 .After it is done ,I could install any software ,the error is as follows:
E: Sub-process /usr/bin/dpkg returned an error code (1)
I wonder what is the meaning of the error.
Parse error: syntax error, unexpected '@' in C:xampphtdocsminippromail.php on line 8 .......its not recognizing the '@' symbol. heres the code im working with
<?php $receiver = myfriend@ourmail.co.in; $subject = wish; $content = Hi! My dear friend how are you.; $sender = myself@ ourmail.co.in ; $headers = From: $sender; mail($receiver,$subject, $content,$headers); echo Mail has been sent successfully.; ?>
I am using apache2 with subversion and trying to get post commit script to run an svn update command. All svn commands seem to work fine manually
Everything used to work fine but then the server ip changed and I can no longer access it with the web name and have to use the ip directly
I am using tortoise svn with vista on my work machine
Here is the script
#!/bin/sh
export LC_CTYPE=en_US.UTF-8
/usr/bin/svn update /home/common/webroot/bob
Here is the result.
Command: Commit
Modified: C:UsersMattDesktopcheckout - bobindex.php
Sending content: C:UsersMattDesktopcheckout - bobindex.php
Completed: At revision: 63
Error: post-commit hook failed (exit code 1) with output:
code....
I think what i need to do is update the certifcate for the apache2, but I'm not sure how to do this, where to put it, and then which of the thousand apache config lines needs to be changed
I have come across this option given below in dhcpd.conf file for DHCP Server configuration. Can any body let me know what this option is all about.Code:option T150 code 150 = string;
View 2 Replies View RelatedCode: if test -f $1 && test -f $2
then
d=$(diff $1 $2)
if [ $d -eq 0 ][code].....
I am implementing an automated backup scheme so I created a shell script which first creates SQL dumps for all MySQL databases, then retrieves all websites from the /var/www directory of a remote server. The latter is working as I am using rsync to get the remote files.However, the MySQL dumps being retrieved are the ones from the local server which is not what I want. I want to get the SQL dumps from the remote server as well.I have a tunnel between the local and remote server which I can connect to without using any password (I added the public key to the authorized_hosts), so I tried to add the following code to the script:
ssh user@192.168.x.xxx
I then attempted to retrieve the SQL dumps and exited from the remote server. However this does not work as I still have to enter exit manually in the terminal for the SQL dumps to be retrieved from the remote host. I don't know why this is happening. This is what the script is trying to do:
//connect to remote server
ssh user@192.168.x.xxx
//retrieve SQL dumps
[code]...
Is there a way to connect to the remote host AND run the script's code on THAT remote host?
i want to run this code
[code]...
i have error in graphics. i have C++ 2005
I am novice. I am trying to create one email form. But i am getting "Parse error: parse error in F:estwampwwwsendmail.php on line 43"
Code:
<?php
if(isset($_POST['email'])) {
[code]....
When trying to install php5 I got the following result. Tried to apt-get clean, autoclean, remove --purge then reinstall the mentioned packages without any success.
dpkg --configure -a didn't get any better result.
Code: Select allsudo apt-get install php5
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets supplémentaires suivants seront installés :
libapache2-mod-php5 php5-cli php5-common
[Code] .....
I get the following error message starting k3b:
frank@linux-avnb:~> k3b
k3b: symbol lookup error: /usr/lib/libkcddb.so.4: undefined symbol: _ZN9QListData11detach_growEPii
<unknown program name>(26884)/: Communication problem with "k3b" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" :
" "Message did not receive a reply (timeout by message bus)" "
frank@linux-avnb:~>
I installed Code:Blocks (8.02 from ubuntu software center) and try to run sample program (at first I tried some program related to OpenCV and configure the project for it).
The Build went OK but I cant Run the program. So I tried the simplest progrma of hello World and still I get the same error even on a clean new project.
The Error: "error while loading shared libraries: cv.so can not open shared object file : No such file or directory"
i've got an HP printer, a new one, and it's got an error code jamming it up. I tried to play musical printers between a windows 7 computer and my own ubuntu computer. this apparently generated the error, and now the printer is no longer working. anyone got a hack or program that can scrub the memory of an hp disk-jet F2480? or should i just throw the thing away and buy a new one?
View 2 Replies View RelatedIm experiencing issues updating. here is the error update is giving me:Reading database....60%dpkg: unrecoverable fatal error, aborting:files list file for package 'liborbit2' is missing final newlineE: Sub-process /usr/bin/dpkg returned an error code (2)A package failed to install. Trying to recoverNothing happens at this point.
View 4 Replies View RelatedI am trying to set up passworldess login - I am trying to automate ssh to use send commands from a Red Hat el5.2 server to a solaris 9 server (I did get it working from solaris 10-9).I have ran ssh-keygen -t rsa and then the ssh-copy-id and i can login passwordless via ssh. N HURRAH
Unfortunately when I use my scripts to automate the commands I ALWAYS receive an "Error Code - 255" - the command is successfully sent.
I'm running spamassassin and want to install the fuzzyocr module for it. One of the dependencies of fuzzyocr is 'giflib' but according to the fuzzyocr page, it needs to be patched before I install it, with a patch which they supply on the fuzzyocr download page. I've tried to install the patch and get the following error.
[Code]...
I'm a C / assembler programmer so am not use to C++, which I need to use. Basically I'm using my own versions of memcpy, but for long and int rather than char. It's for fast graphics. So I have a char array which I copy to another array. But I copy as either longs or ints, much faster. for example
Code:
void * fastmemcpysprite (void *destaddr, void const *srcaddr, size_t len)
{
[code]...
I'm writing a sort of toy shell using fork() and execv(). It runs smoothly enough untill the user enters an invalid command at which point the program hangs, so I need a way to check if the program loaded using execv returned correclty or not in the parent process and kill it if it didntI tried writing stderr to a text file to see if something whent wrong but doesnt really work out. Try running ./digenv GDM -i -Q for instance. (-Q is an invalid option for grep which the program runs at a certain point).Heres the code:
Code:
//digenv
//Carl Reg�rdh 2011-03-24
[code]....
I did a fresh install of 11.2. When I reboot grub came up to load opensusie instead of Windows 7 MBR. Further looking at the /boot/grub/menu.lst file. I noticed it's point to hd0,2 which is my first drive three partition. I load everything including grub to sdb3 (hd1,2). When I pointed everything back to hd1,2 now I get error code 22 on reboot. How do you restore grub to sdb3 or hd1,2. I also need to repair my Windows 7 Pro MBR.
View 9 Replies View RelatedI think that my computer crashed one time, while I was in middle of installing some new software, and it seems like it have made "dpkg" confused with itself - it thinks, that I still need to install "Wine", but it is allready installed, so everything is allright. But everytime, when I am upgrading or installing any kind of software, it give me this error (just an error, everything still works and installs fine):
Code:
Setting up wine (1.0.1-0ubuntu8) ...
kernel.printk = 4 4 1 7
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
[Code]....
Errors were encountered while processing: wine E: Sub-process /usr/bin/dpkg returned an error code (1)
I'm tried to install bandwidthd on Ubuntu 9.10 and keep getting the following error.I have been looking around for a while and have been unsuccessful in finding a answer.
HTML Code:
$sudo apt-get install bandwidthd
Reading package lists... Done
[code]....
using 'ntfs-config' to make ntfs partitions mount on bootup so that I can access my data partition from Ubuntu. The first time I installed ntfs-config it would not run. I uninstalled and reinstalled it and then it ran, but it didn't seem to be responding very well. I attempted to tick the partition I wanted and set it to be writeable. After I closed the app ALL my ntfs partitions were mounted, even the windows and system reserved partitions, and when I attempted to unmount them I got the following error:
Unable to unmount Data
Error unmounting: unmount exited with exit code 1:
helper failed with
unmount /dev/mapper/isw_dfjjdefcdi_RAID5p4 is not mounted (according to mtab)
I tried rebooting. I tried uninstalling ntfs-config, then reinstalling it (now it wont run again). So I'm at a loss as to what to do. I simply want my data partition mounted on boot up and writable, not the others.
The system is Debian Squeeze/Sid with apt.conf set to Squeeze as the default. Most packages are from Squeeze.
I ran apt-get upgrade and it returned an error-code.
It might be it is this bug: Bug#574153: python-pkg-resources: Missing file leaves it unconfigured
I tried aptitude install -f, to hold it and to remove the package python-pkg-resources, but i am getting told the package would be in a very bad stage, and i should re-install it. That doesn't work.