I get the following error message starting k3b:
frank@linux-avnb:~> k3b
k3b: symbol lookup error: /usr/lib/libkcddb.so.4: undefined symbol: _ZN9QListData11detach_growEPii
<unknown program name>(26884)/: Communication problem with "k3b" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" :
" "Message did not receive a reply (timeout by message bus)" "
frank@linux-avnb:~>
Apache doesn't start with libedit.so.0.0.34 ( from libedit0-3.0.snap20090923-4.1.x86_64 ).
Code:
[Tue Dec 15 16:20:51 2009] [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
PHP Warning: Directive 'register_long_arrays' is deprecated in PHP 5.3 and greater in Unknown on line 0
/usr/sbin/httpd2-prefork: symbol lookup error: /usr/lib64/libedit.so.0: undefined symbol: tgetent
Solution: I copied /usr/lib64/libedit.so.0.0.27 from a previous install and symlinked /usr/lib64/libedit.so.0 to it.
Pidgin won't start for me any more. Upon execution from the command line, this is the output:
pidgin: symbol lookup error: /usr/lib/python2.6/site-packages/gst-0.10/gst/interfaces.so: undefined symbol: gst_stream_volume_format_get_type
I've run sudo /sbin/ldconfig, but it didn't help. I've also reinstalled pidgin and libpurple.
ive made a slight mistake on my Ubuntu 9.10 64bit. I was trying to get Voodoo Motion Tracking software to work, and it was having trouble locating some Qt Libs, so I decided it was a good idea to move its included libs into /user/lib32 directory. Voodoo now works, but Skype instead comes up with:
Code:
skype: symbol lookup error: /usr/lib32/libQtDBus.so.4: undefined symbol: _ZN14QObjectPrivate15checkWindowRoleEv Skype was installed using their own provided 64bit .deb - it was previously working fine.
The most recent update impacted my thunderbird-3.0. When launched I get these error messages
/usr/lib/thunderbird-3.0.3pre/thunderbird-bin: Symbol `SSL_ImplementedCiphers' has different size in shared object, consider re-linking
/usr/lib/thunderbird-3.0.3pre/thunderbird-bin: symbol lookup error: /usr/lib/libnssutil3.so.1d: undefined symbol: PL_ClearArenaPool
I can only assume the libnssutil3 library was upgraded and this broke the library call in the thunderbird-3.0.
I performed a yum update and now my yum is not working and I am unable to start my apache processes (in a dmz configuration).This is the error I am getting from yum.
yum clean
Traceback (most recent call last):
File "/usr/bin/yum", line 4, in ?
import yum
[code]....
I'm running Ubuntu 10.10 and was looking for software to mix mp3's. I want to try mixxx (found here) I installed the most recent package by using the ppa of the project (as described here) Install seems to be ok (no error messages)But when I try to run mixxx from the menu nothing happens. Nothing. Running it from the terminal with the command
Code:
mixxx
I get this error message:
Quote:
mixxx: symbol lookup error: /usr/lib/libQtNetwork.so.4: undefined symbol: _ZN16QIODevicePrivate4peekEPcx
Previously after doing aptitude upgrade, my pidgin seems broken with no gui shown. So I decided to download the latest source from pidgin website and build it from source, but I think I made situation worse because it then complained that ssl lib was needed. Then I removed the libpurple (e.g. aptitude purge libpurple0 libpurple-bin libpurple-dev) and reinstalled pidgin (aptitude install pidgin). Now it shows the error
pidgin: symbol lookup error: pidgin: undefined symbol: purple_media_element_info_get_type
I searched on the internet and can not find a solution. The clues on the internet says that's because the piding I use is the older version of libpurple. But I think I've removed all with purge and reinstalled it. Maybe some legacy binary is referenced. What or where it might be? Or where there may contain related information.
I am trying to setup the wlan access for my Fedora 9 system. I installed ndiswrapper. But when I run
Code:
ndiswrapper -l
i am getting the error
Code:
/usr/bin/perl: symbol lookup error: /usr/bin/perl: undefined symbol: PL_use_safe_putenv
Linux Mint Debian Edition x64 is installed and running quite nicely. But as most 64bit users know, you have to take care of the 32bit libraries in order to run alot of software....well, only if you need to run 32bit software.
So, in practice, the first steps are to install ia32-libs and ia32-libs-gtk. That's the foundation. But sometimes that isn't enough....so, depending on your application, you have to discover it's dependencies....via 'ldd'.
For whichever libraries are required, I head over to the Debian 'testing' respository (which LMDE is based off) and search. So after satisfying the dependencies it should be good....take the following as example:
Code:
xxx@xxx ~/Floola $ ldd Floola
linux-gate.so.1 => (0xf772b000)
libgtk-x11-2.0.so.0 => /usr/lib32/libgtk-x11-2.0.so.0 (0xf732e000)
libgdk-x11-2.0.so.0 => /usr/lib32/libgdk-x11-2.0.so.0 (0xf7293000)
code....
However, when trying to run the program the following error occurs:
Code:
xxx@xxx ~/Floola $ ./Floola
./Floola: symbol lookup error: /usr/lib32/libgobject-2.0.so.0: undefined symbol: g_date_time_unref
So from some research, this indicates an issue with a date stamp/version conflict...if this is incorrect, ...this is part of the learning process.
Anyway, this error occurs with other 32bit software i'm trying to run.
The strange thing, though, is that i've done a fresh install of LMDE and ran the same process of setting up the 32bit libs as I did before....but this time I get this error.
I noticed that a lot of software updates were ready today so I installed all of them without thinking to make a note of what they were, so I don't know if ffmpeg or one of its dependencies was amongst them. The very next time I ran ffmpeg, it gave me an error I haven't seen before. After downloading a file from BBC's iPlayer site using get-iplayer, I ran a script to convert it to a format suitable for my Samsung YP-Q2 personal media player. I copied the command out of that script and pasted it onto the command line so that I could capture the console output of that encoding session, shown below:
Code:
[garry tv]$ ffmpeg -i inputfile.mp4 -acodec libmp3lame -ar 44100 -ab 128k -ac 2 -vcodec mpeg4 -b 1024k -r 15 -s qvga outputfile.avi
FFmpeg version git-bcf9828, Copyright (c) 2000-2009 Fabrice Bellard, et al.
built on Oct 25 2009 11:48:38 with gcc 4.4.1
Configuration: --enable-gpl --enable-nonfree --enable-shared --enable-pthreads --enable-libx264 --enable-libfaac --enable-libtheora
libavutil 50. 3. 0 / 50. 3. 0
libavcodec 52.37. 1 / 52.20. 0
libavformat 52.39. 2 / 52.31. 0
libavdevice 52. 2. 0 / 52. 1. 0
libswscale 0. 7. 1 / 0. 7. 1
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x9d27700]ISO: File Type Major Brand: isom
st:1 removing common factor 48 from timebase
Seems stream 0 codec frame rate differs from container frame rate: 100.00 (100/1) -> 25.00 (25/1)
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'inputfile.mp4':
Duration: 00:58:39.02, start: 0.000000, bitrate: 831 kb/s
Stream #0.0(und), 1/50: Video: h264, yuv420p, 640x360, 1/100, 25 tbr, 50 tbn, 100 tbc
Stream #0.1(und), 1/1000: Audio: aac, 48000 Hz, stereo, s16
ffmpeg: symbol lookup error: ffmpeg: undefined symbol: avcodec_channel_layout_num_channels
[garry tv]$
This error, "undefined symbol" is what makes me think that either ffmpeg or one of its dependencies has been updated or the error would have occurred before now. I've been using the script with the command in the above form for some weeks now with no problems, almost always converting an MP4 (but sometimes a .mov) into an AVI. Thinking that it might be the version of ffmpeg in the standard repos, I followed the advice of this thread and removed the standard ffmpeg and installed the one from Medibuntu. (Removing the standard one took WinFF and DVDRip with it, but I reinstalled those afterwards, and I'm sure they don't come into the equation otherwise.) I re-ran the command and the error was exactly as before. Is ffmpeg recently borked or am I missing something obvious? Or something obscure, for that matter?
After I upgraded 11.04 on my netbook (Latitude 2110), I get a symbol lookup error when trying to run Spotify (Native Linux Client) and other QT based applications:
spotify: symbol lookup error: /usr/lib/libQtDBus.so.4: undefined symbol:_ZN14QObjectPrivate15checkWindowRoleEv
I found the following thread on the Spotify support website, with the exact same error. I cannot quite understand how to diagnose and fix the problem from the information provided. Anyone got a good tips or hint?
I have been trying to install lmms on my Slackware 12.1 system.I have installed QT, cmake in order to compile the source.
It seemed to install correctly (after a bit of reading about how cmake works....) but gives me this on run:
Quote:
bash-3.1$ lmms
Notice: could not set realtime priority.lmms: symbol lookup error: lmms: undefined symbol: _ZN8QPainter10drawPixmapERK7QPointFRK7QPixmap
bash-3.1$
So my understanding is that it is missing a file or command associated with the program, through it not being linked or not existing. Is there any way I can find out where it thinks this file/data should be, so as to ascertain what libs/packages have it? As far as I can tell, I have all dependencies satisfied.....
Anyone else having problems installing Skype beta (direct from Skype) on 11.3 x86_64? Error is:
Code:
skype: symbol lookup error: /usr/lib/libQtNetwork.so.4: undefined symbol: _ZN14QObjectPrivate15checkWindowRoleEv
I've been through the forums and Google and made sure I have all the 32-bit libs required by skype. For example:
Code:
6930p:~ # rpm -qa | grep -i libqt4
[Code]...
If i start shotwell i get this message.shotwell: symbol lookup error: /usr/lib64/libgee.so.2: undefined symbol: g_malloc0_n
Not sure if i killed something, but would like to get it going again.Can not really figure it out, but i reinstalled shotwell. Did not solve the problem.
This is the error I receive when I try to install a library. I really do not know If I could do something to skip this error message.As you might see below. I receive the following error message Error in dyn.load(file, DLLpath = DLLpath, ...):unable to load shared library '/home/apa/R/x86_64-unknown-linux-gnu-library2.11/RandomFields/libs/RandomFields.so': /usr/lib64/R/lib/libRlapack.so: undefined symbol: _gfortran_concat_string
This is the full error log
Bash | [CODE]* installing *source* - Anonymous - d4DH09Wx - Pastebin.com
I did a fresh install of 11.2. When I reboot grub came up to load opensusie instead of Windows 7 MBR. Further looking at the /boot/grub/menu.lst file. I noticed it's point to hd0,2 which is my first drive three partition. I load everything including grub to sdb3 (hd1,2). When I pointed everything back to hd1,2 now I get error code 22 on reboot. How do you restore grub to sdb3 or hd1,2. I also need to repair my Windows 7 Pro MBR.
View 9 Replies View RelatedOS 11.2. When I try to log in my account I get the message {kstartupconfig4 does not exist or fails. The error code is 1. check}. I can only log in as root. As root, I check the file system and my files are there in /home/Myname. I can run all my programmes. The executable kstartupconfig4 is there.
View 9 Replies View RelatedI'm getting this error trying to load 11.3. I am running a dual boot system with WinXP and sharing a nfsp "data" partition. /home is recognized and mounted by suse. -- jim
View 6 Replies View RelatedIt seems my laptop (an Acer Aspire One AOA150) runs out of MTRRs at boot. I've done some googling on the problem and read that people recommend turning on MTRR sanitizing to fix it, however, it still occurs. I'm running Arch Linux (but that shouldn't matter). You can see that I have enabled MTRR sanitization here:
[chris@helios ~]$ zgrep 'SANITIZER' /proc/config.gz
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
Here is my relevant system info:
uname -a:
Linux helios 2.6.38-aao-light #1 SMP PREEMPT Fri Apr 1 03:02:37 BST 2011 i686 Intel(R) Atom(TM) CPU N270 @ 1.60GHz GenuineIntel GNU/Linux
dmesg potential warnings:
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.157222] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110112/dsfield-143)
[code]....
I can lookup DNS hostnames with dig and nslookup, but nothing else seems to be able to resolve anything. ping, telnet, Firefox, everything gets "unknown host".
For example:
> dig yahoo.com
; <<>> DiG 9.6.1-P2 <<>> yahoo.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 20438
;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 13, ADDITIONAL: 0
;; QUESTION SECTION:
;yahoo.com.INA
;; ANSWER SECTION:
yahoo.com.17579INA209.131.36.159
yahoo.com.17579INA209.191.93.53
yahoo.com.17579INA69.147.114.224
;; AUTHORITY SECTION:
.10071INNSL.ROOT-SERVERS.NET.
.10071INNSI.ROOT-SERVERS.NET.
.10071INNSH.ROOT-SERVERS.NET.
.10071INNSF.ROOT-SERVERS.NET .....
> ping yahoo.com
ping: unknown host yahoo.com
> ping 209.131.36.159
PING 209.131.36.159 (209.131.36.159) 56(84) bytes of data.
64 bytes from 209.131.36.159: icmp_seq=1 ttl=55 time=97.2 ms
64 bytes from 209.131.36.159: icmp_seq=2 ttl=55 time=98.9 ms
I'm currently running 11.3 and decided I'd try upgrading to 11.4 following the instructions here: SDB:System upgrade - openSUSEUnfortunately, my attempts are defeated at the point of trying to refresh the new repos; I get the following message (for the oss repo, in this case):
Download (curl) error for 'url':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'
With 11.4 replaced by 11.3 in the repo url, it refreshes just fine. The only repository that works when I change 11.3 to 11.4 is the Packman repo. I'm not really sure why the connection fails for 11.4 but not 11.3!
Further info: I have an old router with no IPv6 support, but have IPv6 disabled system-wide. I can enter the url for the repositories into firefox and they come up just fine - it's only with zypper/YaST that I get the above error message.I also tried upgrading using the network CD but ran into the same sort of problem. In this case it may be because the CD installer doesn't disable IPv6. (I didn't want to download the DVD at my connection speed, and the KDE live CD is not listed as suitable for upgrade).
I am trying to use a ZTE AC2726 USB EVDO Modem on openSuSE Linux 11.3 Gnome to connect to the internet. I have edited the /etc/wvdial.conf file as follows:
[Dialer Defaults]
Modem = /dev/ttyUSB0
Baud = 57600
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = .....
When I execute the wvdial command on the terminal the following error appears
joey-suse:~ # wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK .....
The /etc/resolv.conf file has the DNS addresses as below
nameserver 212.49.70.22
nameserver 212.49.70.23
How do I resolve this and connect to the internet?
get phpMyAdmin work on LAMP installed on OpenSuse 10.1 !!
running: "rpm -q" command result:
apache2-2.2.0-21.7
php5-5.1.2-29.25.3
MySQL5.0.18
phpMyAdmin-2.9.1.1-2.3
webmin-1.360-1
My problem is when trying to connect to: "hxxp://www.m-y-d-o-m-a-i-n.com/phpMyAdmin" I reported Error 404: PHP Code: Object not found! The requested URL was not found on this server. If you entered the URL manually please check your spelling and try again. If you think this is a server error, please contact the webmaster. Error 404
[Code].....
About 1 week ago, one of my PC's Hard Drives had stopped working. Because of that, I replaced the HD with a 2-set of Hard Disks from a earlier PC (whose Pentium 4 CPU failed). Because of a failed attempt in dual-booting with M$ WINDOW$, the MBR and Linux are separated between the hard drives. The computer booted up fine on first try (and even got into KDE), but it's internet didn't work (didn't even show eth0 on ifconfig). I decided to install some software via my old 8.04 LiveCD (I can't afford to format that PC for I have critical data on it, 0 DVDs, and no Flash drive), mounting it then chrooting it remembering to mount dev/pts sys and proc. Because the system was something old (Debian Squeeze from ~1 month ago), It had a kernel and GRUB upgrades which I missed among the ~600 others. Naturally, it failed to upgrade because of the missing /dev. Finally, I restarted my computer hoping for a upgraded PC with the programs. However, I instead got this:
Code:
| Sec. Slave Disk : LBA,SATA, 160GB
-----------------------------------------------------------------------------------
[code]....
I am using Ubuntu 10.10 I get the following massage. Admin@Ubuntu21:~$ skype: symbol lookup error: /usr/lib/libQtDBus.so.4: undefined symbol: _ZN14QObjectPrivate15checkWindowRoleEv I have tried reinstalling it but still the same problem.
View 1 Replies View RelatedWhile compiling one of my programs I am getting this error: Undefined symbol:_gfortran_internal_malloc64My program actually gets completely compiles and linked and this error is shown in run time.Does anybody have any experience about getting around this ? May be using some different version of GFortran ?I am using Centos 5.4 64 bit and GFortran 4.4
View 1 Replies View RelatedI am in the process of re-DL-ing the ISO as the checksums didn't match.
Mind you, that was with a shell extension in Win-Lose. Who knows.
Anyway:
I have the ISO (that I had previously) on a USB courtesy of UNetBootIn. All appears well until, quite quickly, I receive an error after the loading process which goes something like:
Code:
Error: cannot find disk at [hash-code - looks like 0ace5f etc etc, is about 12 char's in length.]Something very similar (but not same error I think) happened when I tried to do the same with my OpenSolaris or Fedora install. I.e., gets as far as the very beginning of the loader and then: bork.
At least one of them said "will reboot in 120 secs". Saves me the trouble!
If I have a hard-disk with Ubuntu fully installed on it and I want to - all of a sudden - use Windows XP, is it mandatory that I firstly format the hard-disk first? So far, I have used two versions of Windows XP; one of them is from a few years before the other. Both copies of Windows XP when in start-up from booting from CD are causing errors. One of them is a BSOD error (0x0000007B) and the next Windows CD is stopping and giving me an error with setupdd.sys (error code 4). Is it required that the hard-disk is formatted before you even put a Windows boot CD in?
View 2 Replies View RelatedTo make a long story short:./usr/bin/mplayer: relocation error: /usr/bin/mplayer: symbol codec_wav_tags, version LIBAVFORMAT_52 not defined in file libavformat.so.52 with link time reference
Debian-unstable. I tried to play some avi files with smplayer. I got an error message and searched the fscking web: http://www.mail-archive.com/pkg-multime ... 02393.html
[Code]...