Server :: Configure Rapid SVN On Fedora

Aug 16, 2011

I am trying to configure rapidSVn on Linux (fedora 5). I have configured all the dependencies like APR,svn , wxWidget, neon etc. But while running command make for rapidSVN it is giving below error: I am able to configure but not able to make.I have tried two version of Rapid SVN(XXXX.10,XXXX.12)

[Code]...

View 9 Replies


ADVERTISEMENT

Programming :: Rapid Web2.0 Development Framewor

Feb 22, 2011

I had a few ideas for simple online sites that would be perfect for the whole facebook notifications / android app style of integration. I could start with vi and write a php website, but I've no idea what standard frameworks are available for the more rapid development of sites like this. integrating with openid / google accounts etc... what tools are people using to put together these big blocks of drop in functionality and then tieing together with hopefully surprisingly little code? I'm aware of Django to some extent, should I be digging deeper into this?

View 1 Replies View Related

Ubuntu :: Rapid Disk Contents Analysis (command Line)?

Mar 11, 2011

Second : I need to have a rapid way to exstract some simple raw informations from any hard disk.Something like ls -latr /*.* | sort(by extension/type) The goal I' m looking for is something like

.exe 1034 last creation date
.jpg 2437 "
.xxx 365 "
ecc....

View 1 Replies View Related

Red Hat / Fedora :: Configure DNS Server And Mail Server

Sep 7, 2009

Can you help me to give the solution to how to configure DNS server and Mail server on RHEL 5.0

View 2 Replies View Related

Server :: Configure DNS In Fedora 10?

May 31, 2010

I am very new to linux. So i have a little idea about it. I want to configure DNS server in Fedora 10. I am confused where to put the master file and where to put the database zone file. what else should i do to run the dns completely. Also , my protocol is this: I have a adsl connection in my office via adsl broadband router. This gives a private IP to my linux server. I want to run a local linux server which runs DNS, DHCP, FTP and web server. How can I do this? Should I need to do NATing? Because there are more than 10 computers in my LAN.

View 1 Replies View Related

Red Hat / Fedora :: RHRL 5.1 - How To Configure VPN Server

Jan 1, 2010

I have a RHEL 5.1 server. I would like to configure VPN server for it.

View 1 Replies View Related

Red Hat / Fedora :: Configure Apache For 16 GB Server?

Oct 25, 2010

I need to configure Apache for a 16 GB Server for maximum performance. It should have maximum requests and also with stand load. I have given the current configuration below.

<IfModule prefork.c>
StartServers 8
MinSpareServers 5

[code]...

View 1 Replies View Related

Fedora Servers :: How To Configure OpenLDAP Server

Jun 8, 2009

I am planning to deploy an OpenLDAP server in my LAN for basic authentication, but I have no idea how to do it. I would like to know how to configure an OpenLDAP Server, and I would also like to know about knowledge resources, if any.

View 3 Replies View Related

Fedora Servers :: How To Configure DHCP Server

Aug 3, 2009

How to configure DHCP server on Fedora?Is there any package available on Fedora 11 ?

View 5 Replies View Related

Fedora :: Apache - Configure The Virual Server

Oct 9, 2009

I have apatchi (httpd) installed on Fedora, and I am trying to configure the virual server. I have two websites: [URL] and [URL] and the machine has one public IP address. The problem that:

It always returning the default virual host (even if we typed in the url: [URL] or [URL]), it returns the default configured one (which is the first configured virual host). I have one public address on my machine, and my configuration as following:

[Code]....

Actually [URL] is the one which is used for the global configuration.

View 10 Replies View Related

Fedora Servers :: Configure Squid Server With SSL?

May 13, 2011

I want to configure squid server with SSL so that users send clear text username/password and also data in encrypted mode. i googled but all of the configuration is for reverse proxy not requests from users to proxy server in LAN for example.

View 5 Replies View Related

Red Hat / Fedora :: Configure SNMP Server Using XINETD?

Jan 26, 2011

I am trying to configure SNMP server using xinetd on red hat. I am using non-standard port for it. My connection to server fails. I see the following log messages in /var/log:

Jan 26 17:23:31 [userid] xinetd[15023]: START: my-snmp pid=15047 from=192.128.11.21
Jan 26 17:23:31 [userid] xinetd[15023]: EXIT: my-snmp status=1 pid=15047 duration=0(sec)
Jan 26 17:23:32 [userid] xinetd[15023]: START: my-snmp pid=15050 from=192.128.11.21
Jan 26 17:23:32 [userid] xinetd[15023]: EXIT: my-snmp status=1 pid=15050 duration=0(sec)

can anybody help to point out what is wrong in my config?

[Code]...

View 1 Replies View Related

Red Hat / Fedora :: Configure Centos 5 As Public Dns Server?

Jan 27, 2011

i have a requirment for giving my ip address a domain name.

can i esteblish a server as dns provider so than i can give a domain name for my own ip address.

i want to give it public not in local network.

View 3 Replies View Related

Red Hat / Fedora :: Configure DNS Slave Server In RHEL5/6?

Apr 11, 2011

I am studying RHEL myself, not clear with following topics How to configure DNS slave server in RHEL 5 Whether named.rfc1912.zones file entry can be included in named.conf itslef,if not What is following entry means inside named.conf file

zone "." in{
type hint;
file "root.servers";

[code]...

View 3 Replies View Related

Red Hat / Fedora :: Configure A Dhcp Server On RHEL 5.3 Or 14

May 1, 2011

i'd like to configure a dhcp server on my RHEL 5.3 or Fedora 14, since i don' have a legitimate DNS server....n it asks for option domain-name " "what do i put in there.. me got two nics for my WAN(dhcp enabled) n LAN...i just want to parctice at home for my future job...

View 3 Replies View Related

General :: Configure A SFTP Server On Fedora 10?

Mar 13, 2010

I had an ftp server about a year ago. It was running off of windows 2003, and didnt have any protection on it besides the normal firewall and NAT router. I shut it down after a couple weeks because i was constantly getting password hackers and weird things trying to break inused Ethereal to monitor packet traffic).Anyway, ive decided to take another swing at it and try to configure a more secure server on a more secure OS. I've found multiple HOWTO guides by surfing google BUT most/all of them want me to download a file called "openssh-4.5p1-chroot.tar.bz2", however the address they all point to does not exist! That address is so my main questions are where can i find this file? Is there a better one that would work? Is there a tutorial someone knows about that would get me past this?

I built a computer last week for this purpose (only had to buy a few parts so it's not like i spent $500), and now i feel like ive hit a dead end just cause a site decided to take a file down and no one else has realized it's happened except me.

View 14 Replies View Related

General :: Configure A PXE Server Based On Fedora?

Sep 21, 2010

I want to follow the instructions to configure a PXE server based on Fedora, the instructions written in 2005, suggests Fedora Core 4. I need to have; tftp-server, dhcp, httpd, syslinux. Which I understand can be install subsequently but are included in FC4.

I cannot find a link to FC4, I guess it's out of date now and no longer available, which server should I now download

View 7 Replies View Related

Fedora Servers :: How To Install / Configure Mail Server

Feb 5, 2010

I like to know how to install/configure mail server in Fedora 11, as I am going to do it first time.

View 3 Replies View Related

Fedora Servers :: Configure DNS Server For Small Network

Jul 2, 2010

How to configure DNS server for my small network. In Fedora Linux operating system I want to use Linux as a DNS server for my small office. there are files " /etc/hosts" and "/etc/resolv.conf ".

what is the purpose of these files and in which situation we use these files? For configuring a new DNS server. how can i configure my own DNS server for my small office? Any blog or site in which they show steps to configure DNS server.

View 8 Replies View Related

General :: Configure VNC Server On Fedora 12 To Connect From Any Place

Feb 18, 2010

i want to configure VNC server on Fedora 12 to be able to connect from any place how to configure it i try Google to find instruction about it but i found alot on ways to configure and they are difference what you recommend

View 1 Replies View Related

Fedora Networking :: Unable To Configure The Proxy Server And Authentication?

Aug 9, 2011

Am using Fedora 15, in which i was able to configure the proxy server and authentication. i confirmed this by configuring web broswer and it works. Now the problem is that i want to deploy it out to other computer system(client) i dont want to use the transparent proxy because the Proxy Authentication will not work.
I even tried to configure a DHCP server if it will work but i cant still configure for other computer system to work.

View 1 Replies View Related

General :: Configure A Samba Server Using A Machine With Fedora And A WindowsXP

May 24, 2010

how can i configure a samba server?. im using a machine with fedora and a windowsXP machine.

View 7 Replies View Related

Server :: Configure Rsyslog On Fedora 10 To Collect The Log From Cisco ASA5510?

Mar 29, 2010

I have set up one Fedora 10 server.I found that rsyslog service is running on Fedora 10 server.How to configure rsyslog on Fedora 10 to collect the log from Cisco ASA5510 ?

View 2 Replies View Related

Fedora Networking :: Configure Automate Sending Sms If Server Reboot And Shutdown?

Mar 8, 2009

I need to know how to configure automate sending sms if server reboot and shutdown? Now i just set sms notification once my server it's UP by create scripts in /etc/rc.d/rc.local while booting then from server sending sms notification. SMS - using gnokii attached mobibe phone. Server - Fedora 10

View 3 Replies View Related

General :: Home Server - Configure Fedora 15 To Allow Access Via Port 80 From Other Computers

Aug 6, 2011

I am trying to make my home server accessible to the whole web. I have installed Nginx on my Fedora 15 64-bit Linux machine, and it works with localhost but it doesn't work online or allow other computers on the network to access it via the IP address. It keeps coming back with: Could not connect

I have port forwarding. I have even tried different ports but they all seem to be blocked. What could be wrong? I have a netgear router.

View 4 Replies View Related

Red Hat / Fedora :: Setup And Configure A Server Entirely With Text Only Run Mode 3 On A Virtual Machine

Feb 24, 2011

I'm trying to setup and configure a server entirely with text only run mode 3 on a virtual machine so I can redo my current live server. I'm now trying to set up the firewall of the system using iptables. I've read up on it and came up with the following:

-clear all rules
#iptables -F
-set default policy rules
#iptables --policy INPUT DROP
#iptables --policy FORWARD DROP

[Code]....

Everything above worked for me but just out of interest I looked at my live server which was configured using a GUI. I ran iptables-save and it was pretty much the same but its port open lines read like this:

#iptables -A INPUT -p tcp -m state --state NEW --dport 80 -j ACCEPT

so finally my question is do I really need the "-m state --state NEW"? Wouldn't having that drop established connections on those ports? I'm just confused as to what exactly the NEW state is doing and would it make a difference if I didn't include it.

View 5 Replies View Related

Debian Configuration :: Install A Multi-core System And Configure It To Run Several VMs, One Each For A Firewall, A Caching Proxy Server, A Mail Server, A Web Server?

Jan 25, 2011

I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.

In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).

View 14 Replies View Related

Server :: Configure Internal Zimbra Server To Use External Server To Send Mails?

Feb 16, 2010

I have got a running mail server on CentOS5.4 Final using Zimbra free edition. . Assume that domain is organization.com.local And it is running fine with users created and bugzilla running on the same machine can send mails using this server. But it can obviously send messages to the internal users. There is this option to configure it to use external mail server to send mails outside the network but my external smtp server needs an authentication.Is it possible to configure it this way to use my external server to send mails from internal domain to say gmail?

View 15 Replies View Related

CentOS 5 Server :: Automation Of Ftp Server \ Configure A FTP Server Where Upload And Download Files?

Jan 8, 2011

i have been trying to complete the following project1) Configure a FTP server where we can upload and download files.........2) server must run at 9 pm & stop at 9 am automatically ............although the first task was easy ,i have no idea how to accomplish the 2nd task(not to mention I'm a new user)

View 5 Replies View Related

Server :: Configure Redhat Enterprise Server 4 As Router And Proxy Server

May 18, 2010

Im new in linux i want to configure my redhat machine as both router and transparent proxy!

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved