I have a friend that has a problem with his site on my server.He doesn't have any problem on other servers so I guess there's something wrong in the config that I can change.The site is in /html_doc and then he has a couple of other forlders for example, /api
View 8 RepliesI'm switching internet providers and right now have service with 2. I tried switching my server over today, and ran into trouble so decided to switch it back. I got everything set up again, and it all seems to work - except for ONE of my vhosts. The others work as expected. One (the only "real" site I host) simply hangs. I am "watching" the log file, and the top-level request for "/" (sometimes) comes through and reports response code 200. But, none of the other files (images, css, etc) get requested, and the page never loads.I'm not sure where to even start. Apache is fine since the other vhosts work. I didn't make any changes to my config - except for changing the ip address in my dns. But, that's the same for all vhosts.
It may be worthwhile to note that I changed it back when I tried bringing up the site with the new ISP and it brought up my (new) modem settings with the url. I panicked and couldn't figure out how to fix it.. I thought maybe someone could have been playing with my modem settings (I was automatically logged in as administrator), so I set it back to factory settings. Then I couldn't get the internet to work at all, and changed it back to my original service. Now everything works except for the one vhost.
I have a fresh install, everythings working great, just trying to get my vhosts working, i set them up in yast, but all the requests just go to the second vhost.
View 2 Replies View RelatedI have an urgent issue with my apache. Since last night approximately 50% of my vhosts are responding very slowly. That means I see a blank page for 1 minute and then the content comes up real quick.I restored the httpd.conf file but it didn't solve the problem.
View 4 Replies View RelatedI just configured vhost server in my linux server. When trying to access the open source (SugarCRM) application running on it, its giving me the error message that i am not connected to internet. I have restarted apache by no luck.
View 1 Replies View RelatedI am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
I am using Fedora 13 x86_64 on a Acer Aspire 7730ZG laptop with: 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) I have kmod-nvidia-2.6.33.6-147.2.4.fc13.x86_64-195.36.31-1.fc13.2.x86_64 installed from rpmfuison when I plug in the hdmi cable to the tv, my tv says the resoultion is at 720p, and I can not get any of the resolutions settings to look right on seperate x screen with the nvidia X server settings gui. my tv is a vizo 42inch. also another question is their a way to set the video card to output at 1080? this might be part of my problem?
View 14 Replies View RelatedTo some doc's or how-to's that will show me the best recommended settings for optimum performance for both apache and php configurations?
View 1 Replies View RelatedI've been mandated to reinstall a server at a new client.He doesn't have any documentation on it.the Apache seems to be compiled with a lot of modules.Is there a way of retrieving the ./configure options that was used?With PHP, it is possible with the php-info.
View 1 Replies View RelatedI'm tring to setting up some subdomains but it won't work and I don't understand why.I've got the [URL]. Now I want to setup some subdomains for example with test.domain.de I made an entry in my http.conf which looks like this:
[Code]...
Any one have an idea How to clear apache cache without restarting apache server.
View 5 Replies View RelatedI wanted to remove apache and it worked but everytime it`s installed it comes with the old settings...and I want the default ones..I don`t know to manage an apache server but i`m learning! I tried these commands and not of then didn`t had any effect:
apt-get remove apache2
aptitude remove apache2
rm -rf /etc/apache2 , rm -rf /var/www
dpkg -P apache2
and of course ... --purge remove apache2
I am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
What I want to do now is make nicmatthew.co.cc point to /var/www/nicmatthew/html and make rielworld.co.cc point to /var/www/jimriel/html. I have created the apache vHosts nicmatthew.co.cc and rielworld.co.cc containing this:
Code:
<VirtualHost 67.23.224.90:80>
ServerName nicmatthew.co.cc
ServerAlias nicmatthew.co.cc
ServerAdmin nmatthew@nicmatthew.co.cc
[Code]...
So now I would like to know how to make rielworld.co.cc and nicmatthew.co.cc point to the correct places. Do I somehow set up nameservers? Do I make an A record?
having a bit of trouble getting domains to resolve to their own folder properly on my new server.
this is a plesk/centos server that is pretty much out of the box.
Problem I have is that all the domain names I add to Plesk, are all pulling files from /var/www/html . All 5 domains Ive added each got their own /var/www/vhosts/domain.com/* folders created ...
Is there something I am missing in order to have the server grab files from each domains respective folder?
What I noticed was that if I edit /etc/httpd/conf/httpd.conf and add the virtualhost lines to it, then the one domain name resolves properly.
i replaced my domain with 'mydomain.com'
<VirtualHost *>
ServerAdmin youremail@yoursite.com
DocumentRoot /var/www/vhosts/mydomain.com/httpdocs/
ServerAlias mydomain.com *.mydomain.com
</virtualHost>
I am having a few websites running in a Reverse Proxy scenario on Ubuntu Server 10.04. The configuration is like this:
Code:
|--------------192.168.1.1
| (site1.abc.com)
|
|--------------192.168.1.2
| (site2.abc.com)
|
|
|
|
|--------------192.168.1.3
| (site3.abc.com)
|
|
|
|
|--------------192.168.1.4
| (site4.abc.com)
(Public IP ) |
A-------------------|
(reverse proxy server) |
(192.168.1.25) |
|--------------192.168.1.5
| (site5.abc.com)
|
Except one all websites are running properly and being redirected to their respective domains.
Following is the configuration which I used for each site define on server A a vhost file which contains following
Code:
# ProxyPass / http://<Ip of Server>
# ProxyPassReverse / http://<Ip of Server>
So if I have 5 websites then I have 5 vhost file on the gateway in above diagram A and in each of those file as above root of site is redirected to internal IP. 4 of them are running properly. The fifth website is running on port 8080:/keyword. So in its vhost file on gateway I defined
Code:
# ProxyPass / http://<Ip of Server>:8080/keyword
# ProxyPassReverse / http://<Ip of Server>:8080/keyword
I can see on Lan http://<Ip of Server>:8080/keyword but when from internet I try to see:
http://site5.abc.com
I get redirected to a page is https://site5.abc.com:8443/ and it says
Code:
The webpage at https://site5.abc.com:8443/ might be temporarily down or it may have moved permanently to a new web address. The site5.abc.com has a requirement to be run at port 8080 internally and it is not a Ubuntu server.(Red Hat based server). While rest all are Ubuntu servers including gateway A.
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
I'm running a linux cloud server with the following config
1.2ghz Processor allocation
752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
Httpd.conf
Timeout 20
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
code....
Does anyone have some material about statistics using ubuntu / linux server, or a text which generally describes the ubuntu server?I need urgent, i'm writing specialization work about administration apache and ftp server on ubuntu 10:10 server, so I need something for the conclusion.
View 7 Replies View RelatedI try to config my apache server to list all my files: c/c++, php, java files, like the txt file on my server,
e.g /var/www/mydomain/pub
i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name,
if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file,
Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
config my apache server to list all my files: c/c++, php, java files, like the txt file on my server, e.g /var/www/mydomain/pub i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name, if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file, Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
View 1 Replies View RelatedI and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
I have install Mandriva 2009 and install apache server but its not strating on default configuration file . What I should do for starting apache . i have tried /etc/init.d/httpd start but apache is not running .
View 1 Replies View RelatedI installed Apache server with Debian 5.0.2 Lenny. I am trying to write a script which would analysis web log files. I found the log files on /var/log/apache2. There is an access log file, `access.log`. My question is what configuration file determines the location and the name of the access log file. How can I change them? I used CustomLog in /etc/apache2/apache2.conf like below.LogFormat ": %h %l %u %t "%r" %>s %b" common
CustomLog /home/test/my_log_file common Apache2 generated /home/test/my_log_file. But no logs were written in the file even after I run `/etc/init.d/apache2 restart`. Ichanged the log file location. It still didn't work. However, Apache2 still wrote logs in the file `/var/log/apache2/access.log`
Can anyone tell me in performance tunning of apache-tomcat and jboss application server?when I deploy some application in apache-tomcat the performance is say 100 users per second and incase of jboss it is even worst (35-40 users per second)i want to improve my performance 1000 uesrs per second..
View 1 Replies View RelatedI have a requirement of using a wildcard certificate for 5 subdomains running under apache httpd server and 1 subdomain under tomcat.Is there any possibility of using the single wildcard certificate both in tomcat and apache
View 3 Replies View RelatedI installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.
I have made the following additions to the /etc/httpd/conf/httpd.conf file
Code:
In addition to this, I have added this to my /etc/hosts file
Code:
I wanted to test the Apache server on my laptop only by putting an html file in /var/www/html and naming it as index.html. I want this index.html page to be displayed when I put www.chaalu-kam.com in my browser. What should I do? My firewall is off too
I'm setting up a full server configuration on Fedora, moving it from Mandriva which sadly faces a rather uncertain future. Things are going well and I will be ready (and more familiar with Fedora) in time to upgrade to Fedora 15.
What I have done so far in regard to networking setup:
I first removed Network Manager and replaced it with the network service (chkconfig --level 25 network on). That put an end to the overwriting of /etc/hosts, which now reads simply:
I am running a CentOS 5.6 Server with a website and Forum. The website has a contact form and users can email various people in the organization. I have setup sendmail to send any mails like this to my email address on a Windows machine.The problem is that there emails don't have a header which has the senders original email header. It comes from localhost on my sendmail. How can I get any mail generated from the apache site to ALSO send mail to root on the Centos Server? That way I should be able to see the header and report the spammer or block them.
View 2 Replies View RelatedI'm moving an office intranet server to a new machine running CentOS 5 with apache 2.2.3. Everything worked fine on my old CentOS server and nothing new or fancy being tried on the new machine: default server, no name virtual hosts etc.. However, on the new server I can only see the index.html page when I browse to it. Index.html is a frameset which calls other pages to load from subfolders to /var/www/html. The frameset loads but in each frame I see "The requested URL /hot_stuf/data_colm.html (etc.) was not found on this server.".
View 3 Replies View Related