CentOS 5 :: 5.4 Software Update And Pirut \ When Go To Apply It, The System Complains About Dependency With Rhn-setup-gnome?
May 6, 2010
I am having with CentOS5.4 and Pirut?The update system is telling me I have a Pirut update, but when I go to apply it, the system complains about dependency issues with rhn-setup-gnome. I have searched high and low for the solution to this but haven't found it yet.I have found some hacks, but I am hesitant on messing with the integrity of the system just to complete the update.
View 6 Replies
ADVERTISEMENT
May 29, 2010
Is there any way to apply dependency (order) to the execution of init.d scripts ?
I wrote a script and put it in init.d folder and then executed the relative update-rc.d command, but the problem is that the command fails executing on boot time, but it executes with no problem manually. I found that it requires another service (mysql) which I guess it's not ready in time which the scripts starts.
View 1 Replies
View Related
Apr 9, 2009
I'm having some perl problems while using yum update... I recently upgraded to 5.3 and have the latest MailScanner.. I do not want to have to remove perl because it will remove a bunch of other things along with it.
[Code]....
View 2 Replies
View Related
Apr 1, 2009
Just tried updating 5.2 to 5.3; using both pup and yum, and both get the same error:
Error: Missing Dependency: libgpod.so.0 is needed by package rhythmbox
If I remove rhythmbox (I don't use it on this machine) the upgrade works, but I thought I'd post in case someone wanted to take a look at it.
View 4 Replies
View Related
Jan 5, 2010
I'm trying just a generic yum update to bring the machine up to date, I'm running into problems with two packages and their dependencies, kpartx and lvm2
I've removed any additional repositories, and performed a yum clean all
I think my problem comes down to device-mapper, it's asking for 1.02.32-1 to install lvm2 however if I run a yum list device-mapper it only shows 1.02.24-1.el5 as installed, and it is not marked for update. I've tried downloading the rpm directly, If i try to install the rpm with yum I'm told that there is nothing to do, if I try to install directly I run into problems with conflicts with the already installed package.
The kpartx seems dependent on device-mapper-multipath
I'm getting this problem on 2 machines.
View 11 Replies
View Related
Jul 21, 2009
I am trying to update PHP on a centos server by using
Code:
yum update php which results in the following...
Code:
Setting up Update Process
Setting up repositories
plesk 100% |=========================| 951 B 00:00
update 100% |=========================| 951 B 00:00
[code]....
Error: Missing Dependency: php-common = 5.2.9-1.el4.art is needed by package php-xml I think PHP was previously updated using the centosplus repository which may be causing this problem. yum install php-common results in a nothing to do error.
View 6 Replies
View Related
Jul 13, 2011
I am trying to update CentOS 5.6 but its throwing me an missing dependency error.
Code:
Missing Dependency: /usr/bin/rebuild-security-providers is needed by package java-1.4.2-gcj-compat-1.4.2.0-40jpp.115.i386 (installed) I checked /usr/bin and the file "rebuild-security-providers" is present in the folder. So i really don't know why is it throwing an error. I also searched LQ but no relevant results.
View 4 Replies
View Related
Sep 21, 2009
I'm running my own repository for my CentOS servers and ran into problem which seems to be on the 32bit boxes only. When trying to patch, I get the following dependency error.
[Code]....
View 9 Replies
View Related
Apr 17, 2009
When I try to update my system, I get the message: Error: Missing Dependency: xine-lib(plugin-abi)(x86-32) = 1.25 is needed by package xine-lib-extras-freeworld-1.1.16.2-3.fc10.i386 (installed) after a list of packages which are set to be updated.
View 1 Replies
View Related
May 10, 2011
While i am using yum update am getting an error: Error: Missing Dependency: libgpod.so.0()(64bit) is needed by package rhythmbox-0.11.6-4.el5.x86_64 (installed).
View 3 Replies
View Related
May 28, 2010
Today, I try to update firefox by Package Updater but show error by bellow. "Missing Dependency: xulrunner >= 1.9.0.19-1 is needed by package firefox-3.0.19-1.el5.centos.x86_64 (CentOS5updates)"
View 6 Replies
View Related
Mar 1, 2010
I'm trying to use VirtualBox on a 64 bit host (Fedora 12), and install a 64 bit suse guest. I have VirtualBox installed just fine on the host, but when I try to launch the guest (booting from an iso) I get the message "This is a 32-bit computer. You cannot use 64-bit software on it". One thing to note, this host, while 64 bit, does not have the AMD-V extensions. (Not sure if this matters or not). I do however have another 64 bit host with the AMD-V extensions that runs a 64 bit guest just fine.
I confirmed `uname -m` on the host reports "x86_64". I also did a `file /usr/lib/virtualbox/VirtualBox` just to make sure I got the 64 bit version of VirtualBox Any ideas on why the guest os would think the host is 32 bit when it should be a 64 bit system?
View 1 Replies
View Related
Dec 13, 2009
how to update my system online (for example my firefox 3.0 to 3.5) but i can't figure out how this possibly works. I tried the "online update" using Yast2 but apparently (according to Yast) there is nothing at all to be patched on my system. I tried to click on the Firefox-3.5.5 rpm in the repository web-interface and open it using "install software" but the process aborts because of unresolved dependencies. Is there an easy way to update software without having to download/install every dependency manually?
View 1 Replies
View Related
Mar 6, 2011
I see the gnome 3 was release,It need to burn a CD‚But I want to update Gnome 3 from Gnome 2.32 in my system.
View 2 Replies
View Related
Feb 16, 2010
A client has sent me an RHEL 5.1 box for me to do some work on, but it's not registered with Red Hat. This is causing me problems, because it's a minimal installation, and I need some more dev software.My immediate reaction was to install various bits (emacs, and so on) from my Centos 5(.0) DVD.The base RHEL system only had one (disabled) repo entry,so I added a yum DVD repo entry in yum.conf.d.
This looked good to start with, but it doesn't work. Something in RHEL's pirut/yum/rpm/whatever is getting confused, and can't work out what is/isn't installed.
Question - how do you maintain an unregistered RHEL box? Has RH done something to make life difficult? Is my problem simply that I'm using a Centos 5.0 DVD, instead of Centos 5.1? Am I stuck with downloading lots of rpms from the net and doing everything manually? I really don't want to do that.
View 2 Replies
View Related
Sep 18, 2010
Summary: Does a discrepancy between MySQL client library 5.0.x and MySQL server of 5.1.50 cause "inconsistent behavior", as reported by phpMyAdmin? The longer version: Windows Sysadmin taking the plunge into Linux. I tried to spare you all the rookie questions and did a fair bit of reading. I'm rather happy I was able to get CentOS 5.5 installed and running, configured iptables, got the kernel updated, Apache, MySQL and PHP installed. Then upgraded PHP to 5.2 after I figured out how repos and priorities work.
I got phpMyAdmin installed and running, then decided to upgrade from 2.11 to 3.3.7 but it keeps complaining that my MySQL client libraries are something like 5.0.63, while my server is 5.1.50, and this may cause "inconsistent behavior" or something of the like. So, feeling industrious, I decided to find an updated client.
MySQL-client-community-5.1.50-1.rhel5.i386.rpm
But it wouldn't let me install it as it conflicted with the default mysql-server installation. I also couldn't remove just the old client, to update to a newer one. So I blew away everything mysql on my server and installed the above client
MySQL-server-community-5.1.50-1.rhel5.i386.rpm
and that server file. I'm assuming I'm missing dependencies now as phpMyAdmin claims it can't load the mysql extension. Attempting to 'yum' php-mysql tried to install 'mysql' as a dependency, which immediately conflicted with the files I'd installed. At this point I'm wondering if I'm closing in on successfully installing a version that phpMyAdmin doesn't complain about, or if I should even care that it is complaining and just go back to all the repo versions of everything.
# rpm -e MySQL-shared-community-5.1.50-1.rhel5.i386.rpm
error: package MySQL-shared-community-5.1.50-1.rhel5.i386.rpm is not installed
View 4 Replies
View Related
Jun 2, 2011
I have installed a new Linux distro (just to test it) on my usb memory stick, and I'm trying to run it. I don't know if what I did is correct so far, anyways here's what I have:
Grub on sda (internal hard disk)
sdb with no boot loader (memory stick)
In grub I've been doing:
root (hd1,0)
kernel /kernel-genkernel-x86_64-2.6.37-sabayon root=/dev/sdb1 vga=normal
initrd /initramfs-genkernel-x86_64-2.6.37-sabayon
boot
This seems to work (as opposed to when I forgot the root= parameter, which almost destroyed my linux on sda1 ), but during startup the system complains about no root bein found on /dev/sdb1. I also tried (hd1,0), but it didn't change much.
I'm sure I can boot an OS from usb on my computer, so doesn anyone know what I'm doing wrong?
View 4 Replies
View Related
Jul 13, 2010
I have a error when i want to update my system via YUMI execute the next command.sh@ yum -y updateYou could try using --skip-broken to work around the problemYou could try running:package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigestThe program package-cleanup is found in the yum-utils package.
View 5 Replies
View Related
Feb 11, 2010
I installed VMware server on my CentOS 5 machine. I had problems getting that working. Then I installed VMware Workstation. That worked fine. Then I tried using VMware server, but apparently VMware Workstation deleted some of VMware Servers files. So, I uninstalled VMware Workstation. Then I tried to reinstall VMware Server, but rpm complains package VMware-server-2.0.2-203138.x86_64 is already installed
View 3 Replies
View Related
Jun 20, 2010
My system has been crashing, and I think it may have something to do with Gnome since the crashes only occur when I'm using it. I checked the log file after a crash and it reported...
Gtk-CRITICAL **: gtk_accel_map_unlock_path: assertion `entry != NULL && entry->lock_count > 0' failed
so I went to the Ubuntu launchpad and searched for it, and here it is. Someone has already submitted a patch and the bug status has been changed to "fix released."From reading the comments, I've learned the fix is only in Gnome 2.30, and Ubuntu 10.04 uses 2.28 (I think, maybe 2.26) (If it is possible to update to a new version of Gnome, please let me know). Luckily, someone also submitted a patch on the bug report as a temporary fix. Unfortunately, I don't know how to apply the patch. I couldn't find much information regarding it online, and the only stuff I did find applied to using Gnome's git hub.
View 1 Replies
View Related
Mar 17, 2010
I am an old days RH release user(from 6.x) and just switching back from Debian/Ubuntu to CentOS on some servers, but I can not understand the kernel update strategy currently enabled in CentOS.There are two boxes, with almost identical installation, but recently there was an auto update of kernel on one box. This auto update also seems to issue an auto reboot on the machine, which is unacceptable on server machines.
View 2 Replies
View Related
May 3, 2010
Running 10.04 very nicely, but I have applied a cursor theme - Comixcursor - which appears fine in my Gnome apps, but does not in my KDE apps, i.e. Amarok, and I get the default cursor. Each time I restart my lappy, I have to go into the KDE System Settings to apply it again.
View 1 Replies
View Related
May 21, 2011
I am experiencing a problem reading long filenames on dual-layer 8.5 Gb DVDs. SEE: [URL] I am considering a possible solution might be a firmware update. The drive is a Toshiba-Samsung : SE-S084B/RSBN [TSST=Toshiba Samsung Storage Technology Corp] Samsung provides ONLY windows updates or a web-based *windows-only* method of installing same. SEE: [URL] Is it possible to apply a firmware update using WINE?
View 4 Replies
View Related
Jan 19, 2010
We are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
View 3 Replies
View Related
Mar 6, 2015
How to troubleshoot my desktop. After I use update manager and restart the desktop, it defaults to Gnome classic display instead of the usual Gnome 3 display.
View 6 Replies
View Related
May 19, 2010
My challenge today is a broken sound mixer in gnome. Yesterday I run 'yum update' and it installed about 200 updates. This morning I rebooted, when double-clicking the 'speaker' icon in the top right corner of my gnome and I got a "crash".
(I have to go to mixer and enable 'front speakers' before I get any sound - thats something else i'd like to fix one day) Here is what bug-buddy has to say:
Distribution: CentOS release 5.5 (Final)
Gnome Release: 2.16.0 2007-02-18 (CentOS)
BugBuddy Version: 2.16.0
Memory status: size: 265785344 vsize: 265785344 resident: 10158080 share: 7
[Code]...
Any advice would be great - i think I should start by reinstalling the gnome mixer, but not sure which 'yum' that is contained in. I did do some reading about rolling back, but I read that is by default disabled!! Arh! why! only when you broke something you realise you need to turn it on.... o well hey ho.
View 11 Replies
View Related
Oct 29, 2009
I just ran a "yum update" on my CentOS 5.3 system. After a reboot, I noticed /etc/redhat-release show CentOS 5.4.
I thought yum upgrade was supposed to do that?
I wanted to simply patch my CentOS 5.3 system without turning it into CentOS 5.4 ... YET.
View 1 Replies
View Related
May 16, 2011
Network-manager-gnome caused an error during system update.Quote:network-manager-gnome: Depends: network-manager (>=0.8.99 but 0.8.4~git.20110319t175609.d14809b-0ubuntu3 is to be installedHow can I update network-manager?
View 1 Replies
View Related
Mar 20, 2010
I have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
View 8 Replies
View Related
May 1, 2010
I use Fedora 12 AMD64 and Gnome and some packages like K3B , I want use KDE and I want remove completely Gnome and all thing is depend on Gnome and use install KDE for Default Desktop How I can do this ?
View 4 Replies
View Related
