Server :: How To Start SSL Service In Centos 5.5
Feb 7, 2011
I am in the task of migrating old linux to new linux which centos 5.5. while moving out all apps ,data etc.I need to configure SSL in apache.I have installed mod_ssl with apache 2.2. i went though some docs to configure with certificate that I have . Not sure how to start the service in 2.2. The apache/SSL was configured in my old server which apachectl. SO after importing certificatr , I do ./apachectl startssl to take in effect. In my new server , the http service is /etc/init.d/httpd, not sure how to start SSL service in centos 5.5.
[Code]...
View 2 Replies
ADVERTISEMENT
Apr 24, 2010
Ok, so I have installed apache 22, mysql5.0 and proftpd1.3. When I reboot my server, the above applications do not start up automatically, and I have been trying to figure out how with out much success. know that I need to make some changes inside the init.d directory on my CentOS Server.I am running CentOS 5.4 x86_64 build.I really am not sure how to accomplish the task or where to start.
View 4 Replies
View Related
Oct 9, 2010
i meet problem on named service, i want to configure my DNS with bind...after i /etc/init.d/named statusThis shows :"rndc: connect failed: 127.0.0.1#953: connection refusednamed is stopped"
View 2 Replies
View Related
Oct 12, 2010
I meet this problem after i reformat the CentOS 5...I havent do any configuration, the named service start failed ? why ....
View 2 Replies
View Related
Jun 7, 2010
I have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
View 3 Replies
View Related
Aug 3, 2010
I've just compiled and installed some software (coova-chilli). I usually control this as a service so immediately after install I tried service chilli start I got the following error:
Starting chilli: which: no start-stop-daemon in (/sbin:/usr/sbin:/bin:/usr/bin)
If i run which chilli I get: /sbin/chilli I've tried 'updatedb' and a reboot but no luck. I remember a few months ago I was playing with chilli before and I this was happening. I had to run a simple command to update something or other and it fixed the issue. Of course, I can't remember what that command was.
View 1 Replies
View Related
Nov 28, 2010
I am unable start network service on my centos box. /etc/init.d/network start device eth0 does not seem to be present, delaying initialization lspci | grep Ethernet
Doesn't show any results. It seems os doesn't identify my NIC. I am using compaq presario model pc
View 6 Replies
View Related
May 9, 2009
I have CentOS 5.2 just installed and massively updated with yum -update command. Than I tried to configure firewall. After changes via system_config_securitylevel_tui (open ssh, http, ftp, and 3306:TCP ports) iptables service can't start with message
> /sbin/service iptables start
Flushing firewall rules: [OK]
Setting chains to policy ACCEPT: mangle filter nat [OK]
Unloading iptables modules: [OK]
Applying iptables firewall rules: iptables-restore v1.3.5: Couldn't load match `TCP':/lib64/iptables/libipt_TCP.so: cannot open shared object file: No such file or directory
Error occurred at line: 18
Try `iptables-restore -h' or 'iptables-restore --help' for more information.
[FAILED]
I erased the iptables service and installed it again with yum. How can I make this service work?
View 7 Replies
View Related
Dec 6, 2009
I use FC8 and i want some services like HTTPD and NAMED to start at the start of the system , how to create a script to do that .
View 9 Replies
View Related
Oct 5, 2010
In centos 5.3 i am unable to start sshd service shows error starting sshd :/etc/init.d/sshd:line102"7182 illegal instruction $sshd$ option
Same error while starting the httpd service.
View 17 Replies
View Related
Dec 23, 2010
rhev-h starting NFS service why occur under issue message?
[root@RHEV ~]# /etc/init.d/nfs start
Starting NFS services: exportfs: can't open /var/lib/nfs/rmtab for reading [OK]
Starting NFS daemon: [FAILED]
[root@RHEV ~]# tail /var/log/messages
2010-12-23T09:32:20.507146+00:00 RHEV exportfs[7834]: can't open /var/lib/nfs/rmtab for reading
2010-12-23T09:32:20.562458+00:00 RHEV modprobe: WARNING: Could not open '/lib/modules/2.6.18-194.3.1.el5/kernel/fs/exportfs/exportfs.ko': No such file or directory
2010-12-23T09:32:20.562508+00:00 RHEV modprobe: FATAL: Error inserting nfsd (/lib/modules/2.6.18-194.3.1.el5/kernel/fs/nfsd/nfsd.ko): Unknown symbol in module, or unknown parameter (see dmesg)
2010-12-23T09:32:20.563344+00:00 RHEV nfsd[7838]: nfssvc: No such device
View 5 Replies
View Related
Apr 15, 2010
I try to start clamd service since I found "PROCS CRITICAL: 0 processes with command name 'clamd'" from nagios. so I check at its log file at "tail /home/clamav/logs/clamd.log" it said that log file exceeding maximum limit so I try to rotate log by
pico /root/123/etc/logrotate.d/clamd
/home/clamav/logs/clamd.log {
rotate 12
[code]...
View 2 Replies
View Related
Mar 14, 2011
When ever I reboot my server I always turn on the squid service. Is there any way that without giving command
Code:
#service squid start
my squid service should automatically start ?
View 7 Replies
View Related
Mar 31, 2010
i am using RHEL5 at VirtualBox,at the time of installation i did create two partition one for / and another for swap.Now my /var directory is taking too much space and i decided to create a new partition with required size and mount that partition to /var.Now http service wont start and i did not reboot yet.
View 8 Replies
View Related
Jul 1, 2010
I have a problem with my mail server on zimbra. postfix service does not start and displays the following error:
[root@ns ~]# /opt/zimbra/bin/postfix start
postsuper: fatal: scan_dir_push: open directory defer: Permission denied
postfix/postfix-script: fatal: Postfix integrity check failed!
View 3 Replies
View Related
Aug 3, 2011
I found a way to capture emails sent from my Drupal installation, and Fakemail seems simple enough.
I can follow the tutorial. Since the application Fakemail needs to be running to capture the outgoing emails, it seems like a good candidate for xinetd, yes?
I've found a simple config tutorial describing starting the service and what the parameters are for the service-specific configuration files. This got me this far,
Code:
# default: on
# description: This is a script to start the Sandbox app "fakemail"
service fakemail
{
[Code]....
But the service is not starting up.
Or, recommend another application which uses a similar configuration like Sendmail so I can copy this
The Fakemail application/service is started from command line like so,
# fakemail.py --host=localhost --port=10025 --path=[path_to_email_textfile]
View 1 Replies
View Related
Sep 20, 2010
I googled it and found this information: To enable the telnet service, login to the server as the root user account and run the following commands:
Code:
# chkconfig telnet on
# service xinetd reload
but the very first command did not work.
So, how do we...
[1] start and stop telnet service on UNIX / Linux?
[2] specify configurations / settings for the telnet service to accept or deny connections
View 7 Replies
View Related
Mar 29, 2010
I noticed that my VPS was rebooted recently and a new service appears
[root@localhost ~]# pstree
init─┬─brcm_iscsiuio───2*[{brcm_iscsiuio}]
View 3 Replies
View Related
Nov 6, 2010
I need to start a service before network service How to?
View 1 Replies
View Related
Jun 3, 2010
I have a webservice which runs under Apache Tomcat. The service is started via a script in /etc/init.d. During the course of the Web service processing, the software must make use of the two NVIDIA GPUs on the computer to do some graphics processing. When this system is booted but not logged in, the web service is accessible but the software cannot access the software cannot access the X server to do it's processing. However, when I am logged in, the user can access the X servers and run correctly. I have tried various solutions but I always have to be logged in to run the software. I seem to have permissions problems but I'm unsure how to resolve them
Is there any way to grant permissions to root (the tomcat service is started as root) to allow it to run the software without logging in?
I am running CentOS 5.4 with Gnome display manager.
View 4 Replies
View Related
Aug 9, 2010
I been trying to install the Nvidia driver for my recently installed centos desktop but I could not find the services that I can stop. I have a gnome. did try gdm, xdgm etc etc but no luck how do I stop the x server service ? so that I can install the driver.
View 3 Replies
View Related
Feb 1, 2011
I am trying to accomplish an objective, I need to get 389 Directory server installed in the process however is it possible to just have email addresses of users in the LDAP server? I have a primary domain, example 'abcefg.com' with about 3,000 users and several hosted domains like 'xyz.com' and 'mno.com'. The end goal is to speed up email processing, so instead of the Barracuda asking the email server(s) if a user exist it queries the LDAP.
Is there a way to configure 389 Directory Server to contain just the email addresses of the end users to allow the Barracuda to poll the LDAP server to verify the email address is valid. The rest of the authentication like password is handled by the email server. So in the end the LDAP server would just contain the email addresses (live) and the Barracuda would query the LDAP asking if joebob@abcefg.com exist if it does carry on. If user xxeedd@abcefg.com does not exist drop it and go on.
View 4 Replies
View Related
Feb 17, 2009
Set up a new cluster service for a cifs share. Has these properties:
Service name = cifs_cases
Autostart is checked
name=cases type=GFS Scope=shared
[code]....
View 1 Replies
View Related
Feb 5, 2010
I just did a basic service install of Centos5 and added the RPM package install of VMware-server 2.02. but I don't the VMware service is running (based upon the flowing screen:
[root@centoshost1 vmware-mui-distrib]# ps
PID TTY TIME CMD
2925 pts/0 00:00:00 bash
22378 pts/0 00:00:00 ps
So how do i start the VM service?
View 3 Replies
View Related
Jul 19, 2010
I have a service I've made an init script for, and it's added to chkconfig, which shows it "on" in all the correct runlevels. When I start or stop this service using the "service" command all is fine, but it does not start on it's own at bootup. I am currently at a loss to determine why it is not starting. Here is the script:
#!/bin/bash
# chkconfig: 2345 95 10
# description: Start or stop home automation
#
[Code]....
View 4 Replies
View Related
Nov 3, 2010
I have just finished bulding a virtual web hosting server on my CentOS-5.5 x86_64 linux box with several websites hosted and its working fine. Now I have to build and FTP service in this webhosting server so that i can create indviudal login for each website and provide access to thier respective web directory only. This is where I am stuck. I have been trying to find out some docs and instructions to achieve this but in vain.
What I need is to configure an FTP service in the web server so that individual owner of websites can login to thieir respective web directories only and upload and download files as well as create, delete and modify the contents of their web directory.
View 1 Replies
View Related
Mar 17, 2009
I am new to linux, running a brand new centos 5.2 server. One application I want to use it for is to serve as a network host for a game my friends and I enjoy. Normally, to run the game in host mode you call the binary and pass it a port number (along with other options). To host a second instance of the game, same thing different port, you get the idea.
After doing that the binary runs in your window and dumps to stdout, so if you want it to run 24/7 you have to come up with your own strategy like nohup. Fair enough, now, I'm trying to coax the game into restarting automatically upon reboot. The most correct way to do this seemed to be to write a script for init.d so that's the road I traveled down. Now, to strain the metaphor, the pavement has ended and I'm stuck in the sand.
Here begin my questions:
I've been following the structure of other init.d scripts and I notice they all seem to call the function daemon() (contained in /etc/init.d/functions) to start their services. Looking at the structure of daemon() I see that you can pass it a user and a pidfile. The user part seems to work fine, but no pidfile is created. Let me be more specific.
Like the other scripts, I explicitly touch /var/lock/subsys/game-port on startup, which works fine. However, all of those other services seem to have a pidfile in /var/run and mine doesn't. They don't create it explicitly in their init.d script therefore I assume that some other process is creating the pidfile. At first I thought it would be the call to daemon(), since you have the option of passing it --pidfile, but that doesn't seem to work.
Are the services themselves creating the pidfile? If that's the case then I have more complications because the game binary apparently doesn't do this. Second question but probably related to the first. None of the other init.d scripts I looked at seem to do anything special to detach their services from a particular terminal session, therefore I didn't think that I would need to either.
Again I thought this was something the call to daemon() might accomplish, but either I'm wrong or I'm doing something wrong. I can probably work around this with nohup or appending '&' or something, but I'm just curious that other services like crond, sshd, named, etc., don't seem to do this. Are they determining this behavior from within the binaries themselves? I hope this is clear, as I said I'm new so I may not be getting all of the terminology correct.
View 2 Replies
View Related
Jul 23, 2009
I've a java program which needs to be executed regardless of whether a user is logged in or not. Currently I've a shell script which executes the java program. I login to the server and run this shell script when the server is rebooted. I would like to start this script automatically preferably as a service so that I can stop and restart this service whenever I update the java program.
View 3 Replies
View Related
Dec 8, 2009
There is a particular java app called LanguageTool which we need to host on our centos server. Other applications are supposed to send an http request to this machine; this machine should pass this data (received over the http request) to the java application concerned, obtain the output from the app; and then send this response back to the requesting client...
We need to set this app as a service on startup. The centos machine might restarted from time to time; so we expect this service should startup automatically. What can I do to get this done?
View 1 Replies
View Related
Feb 9, 2010
For the first time in installed and configured centos-ds from this HowTos and from the manuals.It is running nicely but disabled my httpd.Is it not possible to run directory service and httpd in the same machine
View 3 Replies
View Related
