Red Hat / Fedora :: Unable To Install Package Via Yum - Errors
Feb 17, 2010Am trying to install some package in my red hat 5 ,via yum but am unable and getting the following errors :
I have tried to update my yum it gives the below output:
ADVERTISEMENT
Fedora :: 15 - Unable To Install Cinelerra - Get "No Package Cinelerra Available" Errors
Jun 11, 2011I have tried installing cinelerra with autoplus and even doing it by hand. Both ways I get "No package cinelerra available" errors.
From Autoplus:
Code:
Checking programs Completed,Now Running Choice Menu...
Loaded plugins: langpacks, presto, refresh-packagekit
atrpms | 3.5 kB 00:00
Setting up Install Process
No package cinelerra available.
Error: Nothing to do
I also followed the installation instructions from the AutoPlus website and got the same result. I looked at the ATrpm website and all I found was cinelerra-2.1-21_git20101021.src.rpm, Am I doing something wrong, or is there another way to install cinelerra?
OpenSUSE Install :: Errors: Package Not Downloaded
Dec 14, 2010I am trying to install a brand new installation of Opensuse 11.3 on a PC. I am using the Gnome desktop. When installing I get SO many errors saying "YAST2: package "xxx" could not be downloaded" or "installation of package "xxx.rpm failed." Ignore, Abort Retry.
I ran a checksum on the iso I downloaded from this site and it checks out. What is going on?
Ubuntu :: Package Manager Errors For Install Or Update
Apr 4, 2011I'm getting the following error every time i run the package manager to install or update etc..
Code:
E: nxserver: subprocess installed post-installation script returned error exit status 1
Despite the error, apt still works and allows me to install/remove apps.
The application in question also works fine too.
CentOS 5 :: Dependency Errors Install The R Statistical Package
Mar 19, 2009I am trying to install "R" on my CentOS 5.2 machine. Arch is x86_64 and I've removed all the x86_32 packages and run a yum update.
I am receiving the following dependency errors when I do a yum install R.x86_64:
Fedora X86/64bit :: Errors - Package Nss-softokn-3.12.4-19.fc13.x86_64
Jun 19, 2010This has been happening for over a week and is preventing me from installing updates, They all download OK then as they start to install I get this error message. Test Transaction Errors: package nss-softokn-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-3.12.4-17.fc13.i686) is already installed Then the update fails and I am unable to continue.
I am a complete noob with this OS, I left for a week in the hope it would sort it's self out.
SUSE :: Package A War File As An RPM Package - Always Giving Errors In %build Stage
Feb 14, 2011Still I am asked to package a war file as an RPM package. That is an unusual RPM packaging(To me). If you guys could guide me I have a war file inside a folder, that folder is inside a tar file as a SOURCE for RPM package. The structure is like below.
[Code]...
I simply want that the war file from sources is transferred to the web app of my tomcat server through RPM. I try to package it as an RPM, but its always giving me errors in %build stage. When I try to remove %build from stage from the spec file, then it says command missing.
My system details are:
SUSE Linux Enterprise Server 10 (x86_64)
VERSION = 10
PATCHLEVEL = 1
LSB_VERSION="core-2.0-noarch:core-3.0-noarch:core-2.0-x86_64:core-3.0-x86_64"
OpenSUSE Install :: Unable To Install The Package Mesa-32bit From Repository?
Dec 16, 2010Im not able to install the package mesa-32bit from this repository: Index of /repositories/X11:/XOrg/openSUSE_11.3. It tells me to make a huge change on architecture on many packages, plus downgrading mesa to 7.8.2 from 7.9 !
View 9 Replies View RelatedUbuntu :: Unable To Install Any Package
Feb 2, 2010I am unable to install any packages..When i go through synaptic manager and install the package it gives the following error..How to fix it?
View 9 Replies View RelatedUbuntu :: Unable To Install Or Download Any Package
Dec 20, 2010I was installing some program from Ubuntu software center, and suddelny downloading have stopped and does not go further, I tried to exit from that Ubuntu Software Center but I could not... I restart the computer, then I tried to install another program from USC, but it gave me an error with instruction to run sudo pdkg --configer -a or something like that.,, I did it and try again to install from USC and still can not be able to install or download any program any more. ...
View 4 Replies View RelatedSoftware :: Unable To Install Any Package In Ubuntu (10.04)
Jul 23, 2011When I try to install any package in ubuntu (10.04),it gives the error message. Suppose I am installing vlc it gives:
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
gstreamer0.10-plugins-bad: Depends: libflite1 but it is not going to be installed
vlc: Depends: vlc-nox (= 1.0.6-1ubuntu1.8) but it is not going to be installed
Depends: libqtcore4 (>= 4:4.6.1) but it is not going to be installed .....
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
Then I did.
sudo apt-get -f install
It too gives the error as:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following extra packages will be installed: libflite1
The following NEW packages will be installed: libflite1
0 upgraded, 1 newly installed, 0 to remove and 429 not upgraded.
1 not fully installed or removed.
Need to get 0B/7,274kB of archives.
After this operation, 10.6MB of additional disk space will be used.
Do you want to continue [Y/n]? y
E: Invalid archive signature .....
E: Sub-process /usr/bin/dpkg returned an error code (1)
Fedora :: Download And Install A Package (zip Package)
Mar 15, 2009Sometimes i have on some magazines or Internet Zip packages that are the answer of what i am looking for.
Wich tool and how can i do it? c Well, i am in position to say that i had downloaded from Internet or located the package in the Cd or DVD that comes with the magazine.
But now comes the big question. How can i put this package ( install) on my distro ???
Do i have to be a normal user or should it be root or su (superuser) ?
The packages that come with the distro is easy, because i select them and everything is done
As i told before, maybe this is a silly question, but i simple don't know how to install them and i need some of them to leave MS for good.
Fedora :: Install *.tar.gz Package Package After Extraction?
Feb 6, 2010Fedora 12 64bit. Is there an easy and reliable way to install *.tar.gz package after extraction? Instead of going through ./configure etc.
View 6 Replies View RelatedDebian :: Unable To Install Any Package - File Not Found
Apr 27, 2011I would like to install svn, but I am unable to install. sudo apt-get update gives me :
Ign file: eeepc Release.gpg
Ign file:/home/user/packages/ eeepc/main Translation-en
Ign file:/home/user/packages/ eeepc/main Translation-en_US
Ign file: eeepc Release
Ign file: eeepc/main amd64 Packages
Err file: eeepc/main amd64 Packages
File not found
W: Failed to fetch file:/home/user/packages/dists/eeepc/main/binary-amd64/Packages.gz
File not found
E: Some index files failed to download, they have been ignored, or old ones used instead.
sudo apt-get install apache2 gives me :
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package apache2
Ubuntu :: Unable To Install Gnome Package / Enable This?
Jul 7, 2010I cannot install gnome. It complains about swfdec-mozilla needing to be installed, I install it, and it now needs epiphany-extensions, which uninstalls swfdec-mozilla.
So there are conflicting dependencies. Could someone fix this?
Ubuntu :: Install Apache - E - Unable To Locate Package ?
Mar 23, 2011I'm trying to install apache on Ubuntu 10.10 and getting this:
E: Unable to locate package apache2
Ubuntu Installation :: Unable To Install Selected Kernel Package
Mar 15, 2010I've been trying to install Ubuntu Server on an old server since a couple of days and have been unsuccessful. I've google'd a bit but found no solid solution yet to this problem. Everything goes fine and I'm able to partition my SCSI drives and everything. After the installation starts unpacking and copying files this happens. I have to mention that I'm installing from a USB drive with the following added at the end of the normal install options:
Code:
--install cdrom-detect/try-usb=true
Version I'm trying to install: Ubuntu 9.10 i386 Server
CPU: AMD Athlon XP 2000+
RAM: DDR 2*256MB
MOBO: ECS K7VTA3 VIA KT266A socket A DDR
Ubuntu Installation :: Install Aircrack - Unable To Locate Package ?
Apr 5, 2011I am trying to install aircrack but when I try to a get an error message that says unable to locate package. The exact messages are:
The program 'airmon-ng' is currently not installed.
You can install it by typing:
I am pretty new to ubuntu so I am not really sure what I am doing. I don't know if I have to enable "universe" or what I should do. I am not sure if it matters but I am also running Ubuntu from my flash drive so maybe that is the problem.
General :: Unable To Install Python Package On 64bit Ubuntu
May 24, 2011I've a 64-bit Ubuntu Linux machine. Linux version 2.6.28-14-generic (buildd@yellow) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #47-Ubuntu SMP Sat Jul 25 01:19:55 UTC 2009 Ubuntu 9.04
Linux Debian 5.0 ( 2.6.28-14-generic x86_64)
When I tried to install the python-dev package on it using the command sudo apt-get install python-dev, I got following messages.
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed: python-dev
0 upgraded, 1 newly installed, 0 to remove and 271 not upgraded.
Need to get 978B of archives.
After this operation, 24.6kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
python-dev
Install these packages without verification [y/N]? y
Err http://in.archive.ubuntu.com jaunty/main python-dev 2.6.2-0ubuntu1 404 Not Found [IP: 91.189.88.45 80]
Failed to fetch http://in.archive.ubuntu.com/ubuntu/...buntu1_all.deb 404 Not Found [IP: 91.189.88.45 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
Tried with --fix-missing option as well. Same errors in this case also. How I can install python-dev package on 64-bit Ubuntu Linux machine?
Ubuntu Installation :: Unable To Install Any Program By Synaptic Package Manager
Apr 12, 2010Whenever I try to install a program by Synaptic Package Manager, it downloads packages but it doesn't install those.It tries to connect to downloads.openwrt.org but unables to connect because of connection time out. I have attached a screenshot of it.
View 7 Replies View RelatedFedora :: 15 LXDE - Unable To Get Package Manager?
May 26, 2011I tried installing Fedora 15 Gnome on my 8 year old laptop, but it didn't work so well since Gnome 3 couldn't start due to my graphics adapter (although it worked fine in Fedora 14), so I tried installing Fedora 15 LXDE and had much better results. Any way, after running yum update, I tried to install Google Chrome since I prefer it over FireFox, but I noticed that I didn't have the opton to automatically install it with a package manager, only download it. Once downloaded, I tried to open it via the GUI and it brought up a screen asking me what application I wanted to use to open the rpm. It didn't even know how to install a rpm!! I then tried to install it via the command line, but it failed because the package was dependent on others. After looking around in the Administration menu, there does not seem to be any package manager installed. How can this be? I've used many different versions of Linux before, but none that didn't have a package manager or didn't know how to install it's own native binaries. I don't get it.
View 5 Replies View RelatedOpenSUSE Install :: Unable To Use Yast Package Manager Because It Seems To Crash During Repositories Refresh
Jan 12, 2010I am meeting some problems on my opensuse 11.2 system in the last week, I see an higher load on CPU and the system seems to swap a lot of time. Checking on dmesg I found that at boot time I have a lot of errors: I paste a little part of the full log at the end of this post
If I am not wrong I have found and installed an official opensuse 11.2 kernel update through zypper some days ago Moreover, actually I am not able to use yast package manager because it seems to crash during repositories refresh (or just after it)
[Code]...
Ubuntu :: Unable To Update / Install - Package Lists / Status File Could Not Be Opened
May 21, 2011i cant update or install anything. i have started update manager and i got an error. then i tried to update through terminal and got this:
[code]...
way of fixing this?
Fedora Installation :: Unable To Update The Upstream Package
Aug 7, 2010I'm using Fedora 13 and I'm trying to update Gnome Shell on it. I use this command:
Code:
yum install gnome-shell --releasever=14 --disablerepo=rpmfusion*
but I get:
Code:
Loading mirror speeds from cached hostfile
fedora/metalink | 13 kB 00:00
updates/metalink | 17 kB 00:00
[code]....
how can I update gnome-shell package using yum?
Red Hat / Fedora :: Unable To Find A DHCP Server Package For 14 Using Yum?
Mar 8, 2011For some reason I am unable to find a DHCP Server package for Fedora 14 using yum. Does anyone know what I should be searching for or even a .rpm that can be used?
View 2 Replies View RelatedUbuntu :: Synaptic Package Manager ERRORS
Jul 1, 2010I was running the Ubuntu Software Center when my machine froze, the mouse stopped moving etc. so I had to hard boot it.
Then I got a lot of errors and it would not boot, I got in as root and ran the fsck and fixed a lot of errors and so finally got to boot into GUI
Then I saw the red error sign which said run the sudo dpkg --configure -a to fix the problem I did, it didnt?!
It gave me the error
Code:
I found the file status-old so I copied it back into status but then I got this error:
Code:
I get this error in the X as well when I run the Synaptic Pkg Mgr:
Code:
How to re install the synaptic Pkg Mgr? Or how to get it back to run with no errors?
Ubuntu :: Update And Package Manager Errors
Jan 15, 2011I'm totally new to ubuntu and i have a major problem with updating ubuntu, I was looking around for some linux based gaming and came across the online game called "Regnum Online". I installed it and all goes fine until I restart my computer next day, the top panel that usually has daily updates is missing and in its place is a red circle with an x through it I hover over it with my mouse and it reads:
"An error occurred please run package manager from the right-click menu or apt-get in a terminal to see what is wrong."
Which I then right-click and open package manager and it gives the following response:
"E: Type '<!DOCTYPE' is not known on line 2 in source list /etc/apt/sources.list.d/onemyndseye-regnum.list
E: The list of sources could not be read.
Go to the repository dialog to correct the problem.
E: _cache->open() failed, please report."
At the bottom of this message reads:
"this usually means that your installed packages have unmet dependencies."
I don't want to lose my personal files by wiping and reinstalling ubuntu.
Ubuntu :: Package Installation Error / 'E: Unable To Locate Package Xxx'
Feb 3, 2011I am following this guide to installing eclipse via terminal command-line on Linux. However, this seems to be happening lately with all the packages I try to install..I checked the Synaptic Package Manager and reloaded and rebooted the computer, but to no avail.
View 5 Replies View RelatedFedora :: Unable To Send Mail Since Sendmail Package Update
Jun 25, 2011the sendmail packages on my f15 server were updated from 8.14.4-20 to 8.14.5-1 yesterday. since then, every attempt to send mail via a smart relay have failed with :
Jun 25 14:05:10 server sendmail[23512]: p5PD59jr023512: from=root, size=208, class=0, nrcpts=1, msgid=<201106251305.p5PD59jr023512@server.{fromdom ain}>, relay=root@localhost
Jun 25 14:05:10 server sendmail[23513]: p5PD5A8l023513: from=<root@server.{fromdomain}>, size=480,
[code]....
i've tried using various different smtp relays and they all now throw the same error. without going through all my sendmail config, i have the following entries in /etc/mail/sendmail.mc :
define(`SMART_HOST', `{smtp server}')dnl
FEATURE(`authinfo', `hash /etc/mail/authinfo')dnl
and the /etc/mail/authinfo file contains :
AuthInfo:{incoming mail server} "U:{user}" "P:{password}"
General :: Automating The Package Configure Script Errors?
Mar 31, 2011Need help in doing a tedious thing and no idea how to achieve this. The thing I am after is Makefile which generates after ./configure script runs successfully. Now the thing is when we run the `configure` script it may get stuck because of lots of reasons like needs mandatory options to pass with configure, library/header file is missing, etc. So I want to automate this problems as far as I can. As I am not installing the package so apt-get/yum won't hold here for me. So what should be your suggestions on achieving this. Should I study the configure script and the sample Makefile's inside the package
View 4 Replies View Related