Red Hat / Fedora :: Name Of The Process That Connects To The Internet?
Jan 20, 2010
just wanted to ask what is the name of the process that connects to the internet in fedora 12, i tried networkManager and /sbin/dhclient but when i tried to stop them, the my connection didn't disconnected.
View 3 Replies
ADVERTISEMENT
Aug 6, 2010
I know Windows forward and backward but I am so new to linux it's just wrong. I just installed fedora (like 1hr ago) on and old toshiba laptop with a WiFi PC card. Everything seems to work fine except. My Networks connects to my home Wifi network but it will not connect to internet. When it connects the IP address isn't even close to being in the same range as my other laptops and PCs. Like I said I'm new to linux but I'm wanting to learn. Any fixes for this issue? Which linus book is the best one to read for a beginner? Other then not connecting to internet I have no complaints.
View 14 Replies
View Related
Mar 4, 2010
I'm sorry if i'm posting this on the wrong place and if this problem is solved in another post but I couldn't find anything to solve my problem. I'm kind of noob when it comes to these kinds of problems.
I have an Acer Aspire One 110L. I had Ubuntu 9.04 on it working fine but one day something happened. I connected to my wireless network and I got no Internet. I couldn't even ping to my router. I thought it was some kind of bad update I've installed that made it to my computer, so today I've installed Ubuntu 8.10, following this tutorial: [URL].. While following it, I used a wireless usb card to connect to my wireless network and download the packages needed. I've installed WLan via ath5k Method at the beginning, but right after unpluging the USB wireless card, the other wireless card from my Aspire One had the same problem as before. It can connect to the network but I can't even ping my router. No signal. I've tried the madwifi method too but the problem is still here, because it must be something else. The drivers must be fine.
Can anyone please tell me what to do here? I'm pissed off already with this problem. I don't really know what is the problem. I have another 2 computers at home and they work fine via Wireless.
View 9 Replies
View Related
Dec 17, 2010
I installed Debian Squeeze on my system two days ago, using a wired connection to internet (which worked fine). After that, I had to install the non-free wireless package in order to scan wireless networks. It now works fine, and I can connect and get to internet. But with wired connection, i connect via eth0 and none of my applications work. And they're not in offline mode.Also, i already went here: URL,,, and I checked if that was my case. I tryed what they say several times in some different ways, but I still can't connect. Even more, if I change something like they say, I get "unmanaged device" and I can't even connect to the internet. And the wired connection works, I'm using it right now on my ubuntu 10.10.
If you want more information, I just tried to ping sites like google.com or ......com using network preferences and it does work, it gets 100% of the packages back around 50ms later, so the internet appears to work. Also, when I connect via wireless, everything works perfectly.
View 12 Replies
View Related
Nov 23, 2010
Let me start by saying that I am new to ubuntu, and that I always use forums as a last resort.
I installed ubuntu 10, and immediately after the Wifi card deected my network name, and actually connected to it, but then I opened up firefox and....no internet.
Since then I have been trying to fix this problem, and after some research I found out that my card (PCI Cwp-905) is RT2760 based, and I downloaded the linux RT2760 drivers for it.
The driver folder contained a readme file with commands you should enter to install it, and other setup files.
The problem: every command I typed in didn't work. I tried "make", and then "sudo make", but just got permission denied each time. I am now at a dead end. (Please note that I changed my directory to the folder location before doing this)
Does anyone know what I am doing wrong? If you want I can attach the driver files.
View 3 Replies
View Related
Jan 5, 2011
I use vpntunnel.se and followed their tutorial for OpenVPN and it connects and assigns an IP. However, once the sequence is initiated and I open my browser I cannot connect to a webpage and get a "cannot resolve" error. I e-mailed their support and they suggested I change the DNS of my network settings. I did that but the same problem. Once I close OpenVPN my internet works again. It works in windows, so I know it is not my router...I use a wireless connection with my router. I don't know if this has something to do with anything...
View 9 Replies
View Related
Jan 14, 2011
I have an acer aspire one running Linpus Lite (i think) - worked fine for a year on wireless and LAN but yesterday I started it up, it connected fine and clicked up the wireless icon but when clicking the "Browser" icon it won't open the browser screen - repeated clicking brings up a screen that says Firefox was stopped and is still open - please shut it down- How do I do this when there are no screen commands ? I have tried switching off and re-starting the unit but no effect. What can I do to fix it ?
View 9 Replies
View Related
Aug 27, 2015
I've been using Debian for about 6-7 months now. I've had a bit of a major networking problem for the past 4 months or so that I've been trying to fix - specifically, it started when I upgraded to Jessie. I can connect to wifi just fine, and sometimes I can even use the internet for brief periods of time (exceedingly rarely). Then... nothing. No network access, period. I can't ping any outside servers, I can't ping other computers on my network, and I can't even ping my router. Pages I try to load just stay "connecting" for all eternity, network printing fails, and so on.
So after four months of searching online (I've read through way more wireless documentation than I care to say), I finally gave up and admitted that maybe I screwed something up during upgrade to Jessie (as a matter of fact, I did, I had to do the upgrade in two increments [somehow] because my root partition was too tiny by mistake) and I did a clean install. Since I had /home on a separate partition, I was able to keep all my user files, but all settings regarding networking were wiped. So after installing firmware-iwlwifi so I can use my wireless card, I tried connecting to wireless! Success! Then I tried connecting to the internet... success! Briefly. The next morning I tried using the internet again, and it failed in exactly the same pattern as before.
I don't know much about what's going on here, but here's what I do have available:
I do have to use firmware-iwlwifi, which I installed by doing apt-get install firmware-iwlwifi. I don't think it's an issue with the wireless card itself (hardware-wise), the laptop dual-boots Windows 7 (that I never use anymore), and Windows 7 is able to connect to the internet just fine. Connecting directly to my router by ethernet cable works fine, I have perfect internet/network access then.
I can confirm that my laptop is receiving an IP address and that it is using ARP correctly to get the MAC address of my router (I confirmed this by doing the arp command, it has the MAC address correct, I checked from another computer with my router's config page) All other computers on my network work perfectly with my router. To confirm the router/its configuration isn't at fault, I did a full factory reset of the router, but to no avail.
Out of curiosity I tried installing Wireshark (using an ethernet cable to download it) to monitor what happens when I try to access a webpage. I'm no expert on networking, but I noticed something out place when I compare a capture from the affected computer to a capture from one operating normally - there are a lot of STP packets showing up. I did some checking around, it looks like STP is involved in bridging and more complex networking setups (involving switches, for example)... but it shouldn't be found on a home network, especially where there's no bridging whatsoever. These STP packets don't show up on packet captures done from any other computer. I've attached a packet capture from the affected computer here, since the forums won't let me attach a .pcapng file.
Here's the output from a few commands I ran during past troubleshooting sessions:
Code: Select allsudo ifconfig
eth0 Link encap:Ethernet HWaddr e0:db:55:b5:fe:06
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:12455 errors:0 dropped:0 overruns:0 frame:0
TX packets:7781 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
[Code] ....
View 5 Replies
View Related
Mar 10, 2011
I'm using the new opensuse 11.4 with KDE desktop. I can connect to my WPA2 personal network fine, but some other networks, like a WPA2 enterprise network connects, but no Internet(pinging too) resolves.
View 2 Replies
View Related
Jun 20, 2010
I recently installed Xubuntu 10.04 on my desktop computer that had a USB wireless adapter DLink DWA-140. I didn't have to install any additional drivers to get it to work. I put in the network SSID and the password and was connected immediately. However, when I try starting firefox it doesn't load any sites. Can anyone help me in approaching this problem. I have a DLink DIR-655 router. If I should gather more information to get this problem solved then please let me know and I will do so.
Edit: Now I am unable to connect to the network. When I click the network icon in the taskbar, my home network is not visible while it is visible under another ubuntu computer I'm running.
View 2 Replies
View Related
Jul 17, 2010
I bought a laptop today (Compaq Presario cq62) and loaded Ubuntu 10.04 on it. Everything has been running great, but the Wifi has been acting up. It connects to my router for a few seconds to a minute, and then stops all data transfer (although it still shows that I am connected to the internet). My other computers running Mac work fine. I took my laptop to another place with wifi, and it did the same thing.
The data transfer seems to stop when there is a lot going on. Whenever I try downloading new software, it gets to exactly 5% then stops. If I disconnect the wifi, and reconnect it works again for another minute. I may need to be walked through any terminal codes.
On that note, where would be a great place to read up on using Ubuntu (online book?)
View 1 Replies
View Related
Aug 25, 2010
I installed Ubuntu 10.04 32-bit on an old desktop (1.5ghz Pentium 4, 20GB hard drive, 768MB RAM) a week or two ago, at the same time that I installed Xubuntu 10.04 on an even lower performance IBM tower server. The server functions perfectly and my other (Windows XP) desktop recognized it from the start, as did the Ubuntu desktop. However, I rearranged a few ethernet cables the other day without turning off the desktops and ever since my Ubuntu machine does not recognize my server, even though all of the devices are connected via ethernet cable to a linksys router and it connects to the internet without a problem. I'm a linux newbie - this is my first move away from Windows - and I don't know where to turn. Far more confusing is the fact that, when I boot from a LiveCD, the network is recognized and I can read/manipulate files on my server without a problem. Oh, and I briefly flirted with OpenSUSE KDE (not as noob-friendly as Ubuntu, so I'm back) and encountered the same problem.
Needless to say, booting from the hard drive is preferable to booting from CD every time
View 3 Replies
View Related
Nov 11, 2010
trying to run 10.04 netbook live from a memory stick with a view to installing it on my laptop. However although I can see my wireless router and connect to it I cannot access the internet. I have tried this on my laptop and desktop with the same result. I was however able to download Seamonkey browser using the software manager....this also cannot access the internet. Both of my PC's have no problem when using XP or Linux Mint.
I have also discovered that if I piggyback, using Ubuntu 10.04, on a neighbours open wifi link I can gain access to the internet. My wifi is using WEP protection but as I said I can set the link up to the router, entering the appropriate key code, and have a good signal strength, I just cannot access a google search page.
View 8 Replies
View Related
Jan 20, 2011
i have a leased line ( speed 2 MB ) which we use to connect to our mail server , oracle ERP etc.. we have a dhcp scope defined as 192.168.100.1-192.168.101.254. with a default gateway as 192.168.100.90 ( which is a cisco router ) we have a pix firewall ( 192.168.100.10 ).. now the gateway passed all the request to firewall..
we have an ADSL of 4 MB speed.. ip is 83.*.*.230 from ISP. i have a proxy server ( squid ) eth0 is connected to ISP (83.*.*.230).. eth1 to LAN ( 192.168.100.79 ) now the problem is when i put default gateway to eth1 ie 192.168.100.90 the squid connects to internet via leased line.. if i leave the default gateway field empty on eth1 , the squid connects to internet via ADSL ( which i want ) but the problem is no one on the lan cant ping the squid server ( no connectivity to internet for the whole LAN ) how can i solve this problem? i want squid to connect to internet with ADSL, but if i put gateway on eth1 ie LAN squid goes through leased line which i dont want to happen.
View 3 Replies
View Related
Jan 7, 2010
Got a laptop with a RTL8187B wlan card, installed opensuse 11.2 on a 50gb partition. Card was detected straight away but only connects when I enter ip addresses manually, DHCP don't work.
When it is connected it always stays at a speed of 1mb/s and it cannot ping my router or anything else.
Me kernel is 2.6.31.8-0.1-desktop
Searched around the forums but no love, tried compat-wireless but it started crying about dependencies. Modprobed it too..
View 8 Replies
View Related
Apr 23, 2010
The computer connects wirelessly to a router. The router is connected to the internet and that is working well. (If i use a cable connection to the router, I can reach the internet).
Why wont the wireless connection reach the Internet? It is a strong connection. It worked before wirelessly. I am on 10.04 beta, with the recent updates installed.
View 1 Replies
View Related
Jan 16, 2011
My wireless adapter connects to my WPA2 network perfectly, but when I run firefox it says it can't load the webpage, no matter what page I go to. Also, downloading new software doesn't work either. Any ideas please?
View 9 Replies
View Related
Mar 9, 2010
In openSuse I can connect to a wireless network. It says that it is connected, and I can open the router page (http://192.168.1.1/basic.html). But I cannot load any other pages. Nothing else recognizes internet either; I tried using konqueror, YAST and wget with the command line, and none of them could load anything. It is not a router problem or a wireless card problem because both Ubuntu and Kubuntu can connect, from the same computer. I know this is odd because in the only other thread I could find with this issue, it was a different distro and installing openSuse seemed to fix it.
Hardware:
Computer: Yakumo Notebook model 331
Network Card: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
View 5 Replies
View Related
Jan 9, 2011
I have an Acer Aspire One D255 netbook with opensuse 11.3 installed and after several painstaking days of tinkering I successfully installed the broadcom wl drivers, and now my wifi card is operational. However, i can connect to my wireless network, but still have no internet access. I have searched the forums and google for a solution but most issues I have found that are similar to mine have been resolved once the wl drivers and firmware where installed
View 2 Replies
View Related
Aug 9, 2010
I have one pc on which I have installed slackware and samba (fixed IP, mask 255.255.255.0) I have another PC (also XP) which also has fixed IP running XP, and I can connect that to the slackware server easily My third PC connects to the internet and gets its IP address from the Cisco router(?) that provides the IP and mask on boot up.
I tried changing the IP and Mask on the slackware server to match the internet PC (which uses a mask 255.255.254.0) but the PC mask and IP changed on the internet PC I want the PC that connects to the internet to also be able to connect to the slackware server, but I see no need for the slackware server to also connect to the internet - I will mainly use it as a file server When I worked for another company I think the IT department talked about having 2 network cards in the PC that connects to the internet
View 6 Replies
View Related
Oct 15, 2010
Since I have 3 Network cards in my Desktop PC I've configured it to act as a Router using GNU/Linux Ubuntu Lucid in combination with Samba so I could share my internet connection. It works on any laptop a connect to it using any of the network cards ports [regardless of the operating system installed on the Laptops], but when I plug that same network cable to any Desktop PC [regardless of the operating System installed] it doesn't even light the LED in the netcards. From the Client PC seems like nothing is plugged in the the netcards.
View 8 Replies
View Related
Aug 2, 2010
Though under Windows my Internet connection works fine and fluent under Debian linux it connects and disconnects repeatedly at short amounts of time. It didn't used to be like that but at a certain time i was forced to install pppoeconf to get my DSL internet connection going, after that even if i've uninstall pppoeconf and now i'm only using nm-applet to monitor my internet connection i still have this annoying problem.
View 1 Replies
View Related
Apr 14, 2010
I have sendmail running on my centOS 4.6. My lamp server also runs on it. I want to send mail through php mail function. when i execute php page, which fires the mail function, it takes so much long tim1 say even 1 minute, and at last displays that message sent successfully. Suppose, destination address is [URL].... I did not get any mail there. My server is running in LAN. I checked the status of sendmail, it shows me that it ios running. when i issue "nmap localhost" it shows me that SMTP port 25 is open, but when i issue "nmap myserver" (192.168.1.20 myserver ( written in hostfile)), it does not show that SMTP port is open.
I checked the /var/log/maillog, one person in my previous post advice me to see that. There it shows that message is accepted for delivery...but i do not get any mail in my destination, even not in spam folder. One more confusion is that, in my case my server is in LAN and if I am at all enable to open the SMTP port on it, does i need to open SMTP port on my router (which connects my LAN to internet) also needs to open? I think no, because SMTP is application layer protocol, it will wrap my mail in IP packet, which router just need to forward. am i right?
View 1 Replies
View Related
Nov 11, 2010
I've some file with .sh extensions that runs some softwares.Now,how do I stop running that filesI know we run the command ./start_tomcat.sh to start the apache.Is there any command to stop that file/process or is it just kill the process to stop the process
View 2 Replies
View Related
May 26, 2009
I am using Fedora 8 on my laptop, newly installed, I can see the network card(Linksys WPc54G v2) and Network Manager sees the wireless router, however as soon as I tell it to connect my computer freezes and I have to restart. I searched for solutions but all I found was Ubuntu problems.
Actually it seems that the trigger is when the keyring comes up and asks for a password. As soon as I start typing the pass it locks.
View 1 Replies
View Related
Oct 5, 2009
I just recently installed Fedora 11 and I notice that the network connection will not connect automatically. Basically I am trying to get to a point where it automatically connects without anyone logged in. (I hope that makes sense) Right now I have to log in as a user in order to get eth1 to connect and get an IP.
View 8 Replies
View Related
Jun 23, 2009
I got a little problem with network manager. I got two connections in it, with two different DNS-Servers, because the one of my provider is very slow I surf with opendns, but sometimes that slows down too, so I want to change if necessary. Both connections got the same fixed IP.That worked all fine, until I got my new router (it's a Netgear WGU 624). It's connected by cable and I configured it like the old one. But for some reason instead of connecting to the manually configured connections, my fedora 10 creates a new one "auto eth 0" with a dynamic IP. So every time I boot or switch on from standby my PC connects with this one and I have to manually set it to the right connection. There's no chance to edit or delete it cause those two buttons are grey and won't work. I also tried restarting network manager manually and I also tried starting it with su as root.
View 14 Replies
View Related
Aug 4, 2010
When a bluetooth controller I have connects I'd like a program launched (qjoypad) so that I can use it has a mouse. The controller has to be on before launching qjoypad otherwise qjoypad will not work.
So I was wondering if there is a way to launch a script when my controller connects, and then possibly when it disconnects to launch another script killing the qjoypad process.
EDIT: I created a script that checks if /dev/input/js0 exists, if it does then qjoypad is created
Code:
#!/bin/bash
while true; do
if [ -c "/dev/input/js0" ]; then
qjoypad
[Code]....
View 2 Replies
View Related
Jan 24, 2009
I recently swapped out my old network switch (10/100) for a Netgear GS105 gigabit switch. With the exception of my Fedora 10 laptop all the rest successfully connect at gigabit speeds. But my laptop (with an Intel Corporation 82566MM Gigabit Network Connection (rev 03)) will only connect at 100Mbps. If I look in the logs for my network card here is what I get:
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:7e:46:e6:a3
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff
0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
What I can try to bring it up to gigabit speeds?
View 8 Replies
View Related
Jan 10, 2010
Is there any application out there for linux that can notify me of when a new IP address connects or disconnects to my network?
View 5 Replies
View Related