changing the bootble parttion in linux using lilo. Presently when i boot the system i will be booting from primary partition(/dev/sda1) . Is there any commando to change the bootable partition to secondary(/dev/sda2)
View 6 Replies
How can i copy my G4L bootable CD into a partition, so thar i can boot from it, and not use the CD anymore?The idea is based in the fact that i am so lazy ... that opening/closing the CD is getting on my nerves
View 5 Replies View RelatedI am using a 8 GB usb flash to create a F13 Live Media. I created it using the livecd-creator. But when I use it to try to boot, it says "No bootable partition in table". What's wrong? I did some searches on google, but didn't find a solution.
View 7 Replies View RelatedEverything is installed and setup on my system, but when I setup my partitions I chose my Windows partition to be bootable. Can I just use cfdisk to toggle the bootable flag so my linux partition is bootable and rewrite the partition table?
View 2 Replies View RelatedA part of my hd is ntfs (where I keep my windows and windows files). I edited it to be flagged as "bootable" in the disk tools that comes with ubuntu 10.10, and now it wont list as a file system in ubuntu (in other words I cant access it).
View 4 Replies View RelatedI installed Fedora in an external hard drive, and encrypted all the file systems by using LUKS except /boot. What I want to implement is, every change on /boot is logged to encrypted file systems, in order to improve the security. I got a peek to audit, but it seems that audit is the tool which can only log down the information immediately. If one day, somebody gets my hard drive, and modifies the kernel or ram disk file, then returns it to me, how can I detect there is a modification on /boot?
One solution I got (which is not pretty good for me) is, I can use dd to make a whole image of /boot to my encrypted partition, and check whether the image and the /boot partition is the same after every boot...
A week or two ago I installed Ubuntu Server 9.10 on a Intel DG945SEJT-based machine with two WD RE2-drives. I used unetbootin-windows-408.exe to to prepare a USB stick with the 32 bit version of the server version of Ubuntu. The installation went smooth without any problems.
Now when I'm trying to do the exact same thing to an almost identical server (larger HDD:s) I can't change the bootable flag to "on" on the physical raid partitions I create to host /.
I use the the following partition scheme: 10 GB /, 4 GB swap and the rest as /home. They're all on software-RAID1. Last time I did this (and many times before that) I was able to set the flag to "on".
When I press enter it just shows "updating filsystem.." etc. for some second but then nothing happens, the parameter is still on "off". This causes the whole installation to fail in the end due to an error when installing GRUB -> "can not install grub in /dev/sda "fatal error"".
My only conclusion is that the installer downloads some new files from the internet which causes this problem, as I said - nothing else is different except the harddrives (WD RE4-GP).
I have two HDDs in computer, one with ntfs and windows on it and second with btrfs. I want to get data on that btrfs disk. I boot with bootable USB stick with ubuntu on it but I found out that I cannot copy anzthing. I dont have permissions. How to change that. I am logged in as nobody here in USB stick, and files are probably locked as mz previous username when I create them.
View 1 Replies View RelatedI noticed that when using the "daily built images" from Squeeze via Netinst, during the disk partitioner, I am un-able to make the /boot partition bootable.or some reason I can't enable the 'boot' flag on several different ISO attempts and differenthardware vendors. The only thing I can see is that this is an issue with the netinst ISO image from the daily built images. Has anyone seen this or is this a known issue / bug? I don't want to file a bug report if possible but I searched and couldn't find anything on this. I doubt I am the only one who's experienced this so far.
View 11 Replies View RelatedWell I currently have a windows partition currently formatted as ext3 which has the partition flag bootable (It previously had Windows Vista on it). I also have a windows partition with NTFS filesystem with Windows 7 on it which is not bootable because the previously mentioned partition became formatted by me. And I also have more partitions for Ubuntu, which is currently the only OS working.
To show it visually: [URL]
So my question is can I delete the partition called "Inter" and recreate a new partition and format it again with ext3? It has the partition flag bootable, won't I loose all of the partitions this way? It's also the primary partition? Is there a big risk?
I am following the very basic Software RAID instructions associated with 10.04. I am installing using 64 bit Ubuntu 10.04.1 as well as 10.04.2. Hardware is an HP ProLiant ML110 G6. A couple months back I installed on another ML110 G6 using the 10.04.1 install and was able to successfully install a more complicated RAID install. On that system I ran with three partitions. The swap & boot partition was setup as RAID 1 and the third partition was setup as RAID 5. This system had four 1 TB drives installed. That system boots to OS and at this time seems to be just fine.
I am trying a new install on another ML110 G6 but this time using two 2 TB drives under software RAID 1. Following the very basic instructions I am trying to create two partitions per drive. The first one as RAID 1 Swap and the second partition is also RAID 1 but should be marked bootable. This is where I am having problems. I am not allowed to mark the partition as bootable. The only way that flag seems to be changeable is if I leave the partition set to ext4. But once I change it to physical volume for RAID I lose the ability to change the boot flag.
I have tried both 10.04.2 as well as 10.04.2 install media thinking that was the problem but no go. The SATA mode setting is set to compatible which is what the working ML110 G6 is set to as well.
I am currently at a loss. Since the instructions are so simplistic, I am thinking this must be a hardware issue some how.
I am using Ubuntu 11.04 on my sisters computer which I am borrowing until my laptop gets fixed by Dell *sigh*
The only catch was that I had to remove the virus thats been plaguing this computer any means necessary my plan was to delete the windows 7 partition and put Ubuntu in its place temporarily.
My sister didn't have the Windows 7 DVD that was given to her *sigh again* but she did still have the key labeled on the side of the machine. So my plan than included to download that .iso of Windows 7, and then use setup.exe.
I have never worked with Linux before but as part of my new job I need to format and install a program on a compact flash card. I have followed our procedure to the T but when i install the card I get a No bootable partition error. Here is what I'm doing. I go into Gnome terminal and change to my directory to "cd dcmsetupdir" (this may not be important but I want to give as much info as I can. Then I type "sudo ./format_cf". once this is complete (no errors detected), I type in "sudo ./install_cf" this seems to install correctly but when I boot up the unit with the card in I get the no bootable partition error.
View 7 Replies View RelatedI have fedora 12 installed on a laptop with an LVM partition, /dev/hda5 logiacal partion in the /dev/hda4 one, a boot partition on /dev/hda3 and a FAT on /dev/hda2 for win data. There was also a 10GB free partion left from older works on /dev/hda1. Now the /boot partition was set to only 0,2GB and this conflicts with the kernel updates. I freed the 10GB section, formatted it to ext 4 and copied all stuff from the /boot sector on it. now the old /boot is mounted in the grub.conf on a UUID and not the /dev/hda3 as it comes up on fdisk.
I would now like to swith the boot from the small /dev/hda1 partiotn to the larger /dev/hda3 one, but don't know how to manage it with grub (fedora, i understand it's grub-legacy).
I have an NTFS partition that I use to swap file back and forth between Vista and F13. I store school files in there, like documents and text files. When I use Nautilus to access the partition, I am always asked for my root password. This is a little annoying. Is there anyway I can keep this from happening?
I have my Windows partition set up to auto mount with fstab. I can access it fine in the command line and launchers that I created with out the root password. I suppose I could do the same for this partition, but I would like to access it directly with Nautilus if it is possible.
I created a bootable Debian installer on my USB flash drive. The Debian Installation Guide advises;
The hybrid image on the stick does not occupy all the storage space, so it may be worth considering using the free space to hold firmware files or packages or any other files of your choice. This could be useful if you have only one stick or just want to keep everything you need on one device. Create a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it.
I want to put non free firmware packages on the stick but when I try to create a FAT partition in the free space using Disk Utility I get the following error;
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sdb, start=661837824, size=7507093504, type=
Entering MS-DOS parser (offset=0, size=8168931328)
MSDOS_MAGIC found
looking at part 0 (offset 0, size 657457152, type 0x00)
new part entry
[Code] ....
I formatted the drive to clear it, created a new FAT partition and copied the Debian.iso to it again. When I tried again to create a partition in the free space the same error occurred.
I had a dual boot on my dell mini inspiron for win xp and linux debian. Due to some issue with windows, I needed to reinstall it and remove debian. From within debian's inbuilt GParted, I deleted the partition containing windows, and now my system will not load any bootable CD (whether winXp or Gparted live cd). Everytime I restart the system with a bootable Cd, it still takes me into debian automatically.how to reformat my hard drive by deleting linux partitions and re-install winxp from bootable cd.
View 1 Replies View RelatedHow to copy bootable USB stick including MBR partition table? I have Debian Lenny installed.
View 1 Replies View RelatedShould the first bootable partition start from sector 1 on a hard disk? or Can it be created anywhere on the disk? I am using fdisk to create the bootable partition.
View 2 Replies View RelatedHow to change the passphrase for crypted partitions in F14?
View 1 Replies View RelatedI would like to build an oem style install partions that is bootable with menu to choose if I want to run install or boot already installed system. I would like to include current source packages on the same dive so if I don't have internet access at time of install, can can still install what I need.I know with Windows Vista and Windows 7, you can get this but how can I do this with Debian?
View 1 Replies View Relatedlet me know the process to create Windows 2008 NTFS bootable partition from Linux?
View 1 Replies View RelatedI was wondering if I could make logical / partitions if I have a primary /boot partition. Is this a potential way to get around having only 4 bootable operating systems on a single HD?
View 3 Replies View RelatedI have been having problems hibernating my windows 7 partition recently. It happened approximately right after I set up the dual boot.
I have found other topics where it says to make sure that the windows 7 partition is marked as the active partition. I have since done so and it has not changed anything. I did it with Partition Magic on Windows. I did find it suspicious though that my Dell Recovery partition is labeled as boot while the Windows one is marked as Active and System.
However when I looked at it using disk utility in Ubuntu the windows 7 partition is marked as Bootable while the recovery partition is not.
Hibernation works on Ubuntu with a couple error messages while shutting down and some weird screen issues while booting up. But it ends up working decently.
Under Disk Utility the Ubuntu Partition is not marked as Bootable. Should it be?
using suse 11.3 and kde 4.4.4 on the mounted fat32 partition I cannot change icons partition is mounted in fstab in this way:/dev/sda8/ /dati vfat user, users, gid=users, umask=0002, utf8=true, 0, 0.I can create files folders modify, move and save them on the partition but if I try to change the icon (in dolphin right click>properties>click on icon) of the /eros folder (or any other folder or link) system gives me
this error:impossibile salvare le proprieta' , non hai accesso sufficiente per scrivere su /dati/eros/.directory tha in english is something like this: impossoble save properties, you havent enough permission access to write on /dati/eros/.directory this happen also as superuser I remember that with suse 11.0 or 10.3 I was able to change icons on fat32 partitions, now with 11.3 I cannot, there ought to be a way to do what I did with the previous version with this 11.3 brand new ad more advanced version shouldn't it?
I want to change my sda2 partition to ntfs type. i have installed GParted but it is returning a strange type of error. Here is the error dump file...
[Code]...
WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot. WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot.
I am relatively new to Linux and Opensuse. I created the / root partition and now it is growing and maxing out. I have partitioner available to me but how do I change the partition size when the root partition is mounted. Do I login as root and then umount or modify fstab and restart and change from command line or do I format and reinstall everything? I have room to expand but not sure how to manage this?
View 4 Replies View RelatedI'm trying to samba share my NTSF partition in slackware 13. I chose for root to have read/write access only.
How can I change this to allow samba share for my regular non-root account?
I want to change the swap partition to another partition. Is there a gui that can make this process easier so I don't have to do things like manually editing files?
View 2 Replies View Relatedcreating a bootable floppy from a bootable floppy image on a NON Linux machine I am trying to install dsl (damnsmallLinux) on one of my old Compaq 2000 Deskpro machine having 256RAM and 2 GB hardisk. (which I hope to increase to 8 or 10 GB ...can I use a larger disk capacity??) I have downloaded the floppy bootable image from the website using a machine a fedora OS machine that does not have a floppy drive. I have even converted the image file to an iso file. I can copy this image file or iso file to the Compaq machine but how do I use it as a bootable floppy? OR how do I create a bootable floppy disk from this image?
View 6 Replies View Related
