Ubuntu Installation :: Delete The Partition With Flag Bootable?
Sep 6, 2010
Well I currently have a windows partition currently formatted as ext3 which has the partition flag bootable (It previously had Windows Vista on it). I also have a windows partition with NTFS filesystem with Windows 7 on it which is not bootable because the previously mentioned partition became formatted by me. And I also have more partitions for Ubuntu, which is currently the only OS working.
To show it visually: [URL]
So my question is can I delete the partition called "Inter" and recreate a new partition and format it again with ext3? It has the partition flag bootable, won't I loose all of the partitions this way? It's also the primary partition? Is there a big risk?
View 2 Replies
ADVERTISEMENT
Feb 15, 2010
A week or two ago I installed Ubuntu Server 9.10 on a Intel DG945SEJT-based machine with two WD RE2-drives. I used unetbootin-windows-408.exe to to prepare a USB stick with the 32 bit version of the server version of Ubuntu. The installation went smooth without any problems.
Now when I'm trying to do the exact same thing to an almost identical server (larger HDD:s) I can't change the bootable flag to "on" on the physical raid partitions I create to host /.
I use the the following partition scheme: 10 GB /, 4 GB swap and the rest as /home. They're all on software-RAID1. Last time I did this (and many times before that) I was able to set the flag to "on".
When I press enter it just shows "updating filsystem.." etc. for some second but then nothing happens, the parameter is still on "off". This causes the whole installation to fail in the end due to an error when installing GRUB -> "can not install grub in /dev/sda "fatal error"".
My only conclusion is that the installer downloads some new files from the internet which causes this problem, as I said - nothing else is different except the harddrives (WD RE4-GP).
View 5 Replies
View Related
Aug 4, 2009
I installed cygwin with rsync on a Win XP Machine. My goal is to backup a folder from one hard drive to another (both on XP machine).
I run the following command from a batch file:
Works fine except the --delete flag is not working. Copies everything in source to destination, but doesn't delete some extra files that are present on the destination, but aren't on the source, which it's supposed to. I looked at the rsync man page, and I'm doing everything right... such as not using wildcard.
The same command works perfect on another computer (XP machine; source and dest both on XP machine).
View 1 Replies
View Related
Feb 14, 2010
GNU GRUB 0.97
Ubuntu 8.04.4
2.6.24-26
Added an SSD (dev/sdc) and decided to move some less often changed directories there. Started with /usr and /boot, leaving / on a primary in the first drive, for now. All started ok, and my changed fstab mounted the right ones, and the system works.
However, grub is actually using the original /boot on / on sda1. I cannot see any way to change this. (Which makes it sorta hard to update the kernel
From grub:
Okay, since it has two choices, I tried to tell it which one to use. But, grub> root (hd2,5) does nothing.
Disk /dev/sda:
what I seem to recall, grub doesn't care about the boot flag on the disk. Nor does it care about primary vs. logical (except GNU doc says "makeactive" only works on a primary?).
The GNU doc also indicates that it looks for a directory /boot on the partition, so if you're mounting a partition as /boot, it also needs to contain a /boot directory under it. Tried that, but no change.
Is my problem the logical partition? Does that prevent "grub> root" from changing it? I'm afraid to wipe out the old /boot and find that I can't start up.
View 9 Replies
View Related
Jul 28, 2011
I am using Ubuntu 11.04 on my sisters computer which I am borrowing until my laptop gets fixed by Dell *sigh*
The only catch was that I had to remove the virus thats been plaguing this computer any means necessary my plan was to delete the windows 7 partition and put Ubuntu in its place temporarily.
My sister didn't have the Windows 7 DVD that was given to her *sigh again* but she did still have the key labeled on the side of the machine. So my plan than included to download that .iso of Windows 7, and then use setup.exe.
View 4 Replies
View Related
May 11, 2010
How can i copy my G4L bootable CD into a partition, so thar i can boot from it, and not use the CD anymore?The idea is based in the fact that i am so lazy ... that opening/closing the CD is getting on my nerves
View 5 Replies
View Related
Aug 29, 2010
I am using a 8 GB usb flash to create a F13 Live Media. I created it using the livecd-creator. But when I use it to try to boot, it says "No bootable partition in table". What's wrong? I did some searches on google, but didn't find a solution.
View 7 Replies
View Related
Aug 9, 2010
I noticed that when using the "daily built images" from Squeeze via Netinst, during the disk partitioner, I am un-able to make the /boot partition bootable.or some reason I can't enable the 'boot' flag on several different ISO attempts and differenthardware vendors. The only thing I can see is that this is an issue with the netinst ISO image from the daily built images. Has anyone seen this or is this a known issue / bug? I don't want to file a bug report if possible but I searched and couldn't find anything on this. I doubt I am the only one who's experienced this so far.
View 11 Replies
View Related
May 19, 2015
I created a bootable Debian installer on my USB flash drive. The Debian Installation Guide advises;
The hybrid image on the stick does not occupy all the storage space, so it may be worth considering using the free space to hold firmware files or packages or any other files of your choice. This could be useful if you have only one stick or just want to keep everything you need on one device. Create a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it.
I want to put non free firmware packages on the stick but when I try to create a FAT partition in the free space using Disk Utility I get the following error;
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sdb, start=661837824, size=7507093504, type=
Entering MS-DOS parser (offset=0, size=8168931328)
MSDOS_MAGIC found
looking at part 0 (offset 0, size 657457152, type 0x00)
new part entry
[Code] ....
I formatted the drive to clear it, created a new FAT partition and copied the Debian.iso to it again. When I tried again to create a partition in the free space the same error occurred.
View 7 Replies
View Related
Jan 22, 2010
I was wondering if I could make logical / partitions if I have a primary /boot partition. Is this a potential way to get around having only 4 bootable operating systems on a single HD?
View 3 Replies
View Related
Jan 9, 2010
Little explanation: OEM HP pcs come with an HP_RECOVERY partition which contains an installer which will wipe the HD and install vista (shivvers) Now despite how much I looooove vista, I was wondering why the OS_TOOLS partition shows up in places and recovery doesn't... especially cause niether have a hidden flag...
(As a side note, what the hell does OS_TOOLS do? google yields no answers)
View 8 Replies
View Related
Jun 2, 2011
I just installed windows 7 and ubuntu stopped booting even though it was still there, so I thought I would just change the partition flag to boot. I found out later that I had to create a new mbr but after I changed the boot flag, windows 7 stopped booting and I tried changing it back, but it didnt work. So I was wondering if i didn't use the correct flags or is there another way to get windows 7 to boot again? I was using GParted to change the partition flags and that i am using windows 7 ultimate 64bit
View 1 Replies
View Related
Aug 9, 2011
I would like to build an oem style install partions that is bootable with menu to choose if I want to run install or boot already installed system. I would like to include current source packages on the same dive so if I don't have internet access at time of install, can can still install what I need.I know with Windows Vista and Windows 7, you can get this but how can I do this with Debian?
View 1 Replies
View Related
Apr 15, 2010
I have a created an ext3 partition and when i tried to set is hidden flag, there seems no effect. how to set the hidden flag of an ext3 partition?
View 1 Replies
View Related
Aug 23, 2010
I was wondering...can i delete my current ubuntu partition and the install a newer ubuntu version in it? if so, how do i do this?
View 1 Replies
View Related
May 23, 2011
I'm using 9.10. I want to delete my Windows partition.On System--> Administration there is something called "Disk Utility".Here is a screenshot:Is it as simple as clicking the "delete" button? I thought I would have to do something with the Terminal, though I would prefer not to.
View 9 Replies
View Related
Sep 5, 2009
I have a 750GB SATA drive. It has a 537GB Unrecognized partition (Palimpsest and LVM say it's FAT16), and the rest of the space on the drive (213GB) is unallocated.Windows cannot delete the unrecognized partition, nor install to it. It just spits out a generic error. I get a more verbose error when I try to delete the unrecognized partition from a Fedora live CD:Quote:
org.freedesktop.DeviceKit.Disks.Error.Failed: Error erasing: helper exited with exit code 1: In part_del_partition: device_file=/dev/sda, offset=1048576
Entering MS-DOS parser (offset=0, size=750156374016)
[code]...
View 2 Replies
View Related
Apr 24, 2010
Everything is installed and setup on my system, but when I setup my partitions I chose my Windows partition to be bootable. Can I just use cfdisk to toggle the bootable flag so my linux partition is bootable and rewrite the partition table?
View 2 Replies
View Related
Jul 6, 2011
how would i go about deleting my old kernel?i have my ubuntu machine partitioned the way gentoo would partition a drive with a seperate boot directory. my boot directory is only 200 megs so i can probably fit 4 kernels max into it and need to eject the old ones.
View 3 Replies
View Related
Jan 20, 2011
I have F14 live on a USB stick and the PC boots fine from this.Now I want to install to the HDD but I need to get a handle on the existing partitions.I don't need too much space for linux, can I delete the 3rd and 4th partitions (D drive and EFI partition) and add my linux partition in this space?Investigation so far suggests that the EFI partition is not used and the D drive is empty.
View 3 Replies
View Related
Feb 23, 2011
I had a drive with a partition layout like so:
~50gig Windows 7 - NTFS
~100gig Ubuntu - EXT3
~100gig Snow Leopard - HFS+
~100gig Extended Partition
-- ~100gig Swap Disk - exFat
I wanted to delete the Snow Leopard partition and format the Swap Disk partition to something else. exFat was causing major file size bloat on small files. QT sdk bloated to like 11 gigs or something ridiculous like that. Anyways, I loaded up an Ubuntu 10.04 LTS live cd and gparted then deleted the Snow Leopard partition. Gparted said "Mission Accomplished" and tried to rescan the drive, but never found it. At this point I restarted the computer, a dell laptop, which didn't boot with an unable to find a bootable device error. The ubuntu live cd doesn't see the drive anymore. gparted scans for drives indefinitely and fdisk -l has no output.
View 9 Replies
View Related
Dec 4, 2010
A part of my hd is ntfs (where I keep my windows and windows files). I edited it to be flagged as "bootable" in the disk tools that comes with ubuntu 10.10, and now it wont list as a file system in ubuntu (in other words I cant access it).
View 4 Replies
View Related
Aug 18, 2011
KDE 4.6 - opensuse 11.4.
I have a separate ext4 partition which contains all my data (music, movies, etc). When I delete files from this partition it is very slow because it copies files from my data partition to the Trash folder in my home partition. How can I avoid this? Can't the trash be configured so that it uses a trash folder in each partition instead of copying files to another partition (which is slow).
View 9 Replies
View Related
Jul 24, 2010
I want to wipe out my Windows partition and reinstall due to sluggishness. I plan to use Windows instructions as if it was on a hard drive by itself. Will this affect the multi-boot capability or the Linux partition in any way? Would it be easier to reformat and partition the entire hard drive and re-install both OSes? I use OpenSuse 11.2 and Windows XP.
View 6 Replies
View Related
Mar 7, 2010
I'm running 9.10 off of a 4 GiB CF card. I keep running into space issues with updates, so I purchased an 8 GiB replacement card. I've cloned the 4 GiB card to a .IMG file using DD.I've then copied the 4 GiB image back to the 8 GiB card using the Ubuntu startup disk creator program. Once done, I'm able to properly boot off of the new 8 GiB clone.Unfortunately, the clone ends up with 3.67 GiB of unallocated space at the end *see attached). I tried deleting the "extended" partition that the swap is located at after booting from a Live CD and the system was unable to boot after this. I was thinking that I would delete the swap entirely and create a swap file after I merged the existing partitions, but I was unable to do this.
best way to do this (e.g. get one large 8 GiB partition with my old image on it)? I still have the original untouched 4 GiB card and also have an external CF drive if I need to redo the cloning. I've also used Clonezilla before, so perhaps there's a way to do this that allow me to grow the image as it's being cloned.
View 1 Replies
View Related
Mar 1, 2011
I am following the very basic Software RAID instructions associated with 10.04. I am installing using 64 bit Ubuntu 10.04.1 as well as 10.04.2. Hardware is an HP ProLiant ML110 G6. A couple months back I installed on another ML110 G6 using the 10.04.1 install and was able to successfully install a more complicated RAID install. On that system I ran with three partitions. The swap & boot partition was setup as RAID 1 and the third partition was setup as RAID 5. This system had four 1 TB drives installed. That system boots to OS and at this time seems to be just fine.
I am trying a new install on another ML110 G6 but this time using two 2 TB drives under software RAID 1. Following the very basic instructions I am trying to create two partitions per drive. The first one as RAID 1 Swap and the second partition is also RAID 1 but should be marked bootable. This is where I am having problems. I am not allowed to mark the partition as bootable. The only way that flag seems to be changeable is if I leave the partition set to ext4. But once I change it to physical volume for RAID I lose the ability to change the boot flag.
I have tried both 10.04.2 as well as 10.04.2 install media thinking that was the problem but no go. The SATA mode setting is set to compatible which is what the working ML110 G6 is set to as well.
I am currently at a loss. Since the instructions are so simplistic, I am thinking this must be a hardware issue some how.
View 4 Replies
View Related
Sep 19, 2010
3 partitions (in order): Windows 7, CentOS and shared data partition.
I need to increase the size of the Windows 7 partition (c:windowswinsxs seems to be something not easily remedied).
GParted didn't work in moving things around (bad sector) so I wiped out its partition (# 2 out of 3) and I was able to increase the size of the Windows 7 partition (I can reinstall CentOS easily and not much work lost).
Except ... no more grub menu (unsurprising). This incantation does allow me to boot into Windows 7.
Is there any way of rebuilding the grub menu short of reinstalling CentOS (5.5)?
View 2 Replies
View Related
Jun 1, 2010
changing the bootble parttion in linux using lilo. Presently when i boot the system i will be booting from primary partition(/dev/sda1) . Is there any commando to change the bootable partition to secondary(/dev/sda2)
View 6 Replies
View Related
Jan 5, 2010
After updating to Karmic, Synaptic shows almost all of my installed packages in the category "Installed (manual)", including about half of the packages that belong to a clean Ubuntu installation (e.g. apparmor, apt and hundreds of others). As a result, I can't easily get a list of those packages that I did indeed install manually and may want to remove. Is there a way of removing the "Installed (manual)" flag from all packages?
If I could do this, all packages that do not belong to the core Ubuntu system should show up as "Installed (auto removable)" and I could individually mark only those as manually installed that I really still need and let apt/synaptic uninstall everything else. I know that with today's hard disks, disk usage of installed packages is not an issue. But those packages accumulate over time and need to be updated with every security update and every ubuntu dist-upgrade, wasting time and bandwidth.
View 2 Replies
View Related
May 4, 2011
I have never worked with Linux before but as part of my new job I need to format and install a program on a compact flash card. I have followed our procedure to the T but when i install the card I get a No bootable partition error. Here is what I'm doing. I go into Gnome terminal and change to my directory to "cd dcmsetupdir" (this may not be important but I want to give as much info as I can. Then I type "sudo ./format_cf". once this is complete (no errors detected), I type in "sudo ./install_cf" this seems to install correctly but when I boot up the unit with the card in I get the no bootable partition error.
View 7 Replies
View Related
