I'm trying to samba share my NTSF partition in slackware 13. I chose for root to have read/write access only.
How can I change this to allow samba share for my regular non-root account?
I cannot write files to an ext4 partition I created unless using gksu nautilus, so I tried Code: sudo chown my_user /dev/sda3 but the owner is still reported in the properties to be root. /dev/sda3 is the path I see in gparted.
View 6 Replies View RelatedI have all my music/photos etc. on a different partition to my Ubuntu and Windows partitions.
However, I can't make any changes like deleting files/renaming etc. because I'm not the partition's 'owner' or i'm not in root.
change the ownership of the partition so I can change files from Ubuntu.
Just intalled Ubuntu 10.4 but one of my partitions /media/extra is owned by root, i would like to chance the owner to my user. I've tried sudo chown -Rf username:usergroup /media/extra but i stil have no permissions.
View 1 Replies View RelatedI am completely new to Linux in general, and have recently downloaded Fedora 15 KDE spin. I tried dual-booting between Windows 7 and Fedora by shrinking one of my Windows partitions (I have two, this partition not containing the Windows installation). I tried shrinking it to 30 GB less than the total space available on the partition, and after pressing continue, received an error (which I unfortunately dismissed quickly and can't remember). In the file manager, Fedora showed that my partition changed from 1.3Tb to 1.2 Tb, but I couldn't access it. Upon rebooting into Windows, I still can't access it, receiving a "format drive before use" popup and then error stating that it is possibly of a different filesystem or corrupt.
Unfortunately, I stupidly didn't backup any of my data (which I will be sure to remember to do in the future). I installed EASEUS Partition Master 8.0.1 Home Edition, which states that my drive is still of NTFS filesystem and has the total space it should. However, upon clicking "check drive," it states there are no errors and when trying to "explore files," it doesn't find any (yet it shows the correct amount of used and unused space). I then tried running TestDisk, but only allows me to check my media drive E, which is my dvd drive that has my Fedora Live CD in it (which cannot be ejected manually or through Windows, an error stating it cannot be ejected). I didn't go through with TestDisk for my DVD drive because I needed to verify the type of partition (which to my knowledge shouldn't even exist). It shows 700 something MiB / 600 something MiB. Although I have decent general knowledge about computers, I am a complete novice when it comes to doing something like this.
I have two hard drives, a 320GB and a 1.5TB. The first hard drive has two windows partitions. The first one is the main vista partition and the second one is one for factory restore (its an HP pavilion).
So wanted to install both ubuntu and ubuntu studio on the second hard drive, so I allocated about 1TB as an ntfs partition that I wanted to be accessible by both vista and ubuntu. So I have 400GB left for both distros. I have partitioned off two 40GB partitions for the two roots and I'm sharing one large home parititon and I put a swap partition at the end of the disk.
After I got through the second installation (ubuntu studio) vista no longer recognised the ntfs partition on the second disk. I thought maybe the install botched the boot sector, so I used testdisk to try to fix it, but it hasn't done any good. I do not want to format the second drive again because I have data on there I transferred over from an old hard drive before I installed ubuntu.
I tried to 'initialise' the disk in vista, but that just wiped the partition table so I had to fix that with testdisk on a live cd
Does anyone have any idea how i could possibly fix this problem or what winblows is thinking? I want to be able to read the partition in windows.
Code:
using suse 11.3 and kde 4.4.4 on the mounted fat32 partition I cannot change icons partition is mounted in fstab in this way:/dev/sda8/ /dati vfat user, users, gid=users, umask=0002, utf8=true, 0, 0.I can create files folders modify, move and save them on the partition but if I try to change the icon (in dolphin right click>properties>click on icon) of the /eros folder (or any other folder or link) system gives me
this error:impossibile salvare le proprieta' , non hai accesso sufficiente per scrivere su /dati/eros/.directory tha in english is something like this: impossoble save properties, you havent enough permission access to write on /dati/eros/.directory this happen also as superuser I remember that with suse 11.0 or 10.3 I was able to change icons on fat32 partitions, now with 11.3 I cannot, there ought to be a way to do what I did with the previous version with this 11.3 brand new ad more advanced version shouldn't it?
I want to change my sda2 partition to ntfs type. i have installed GParted but it is returning a strange type of error. Here is the error dump file...
[Code]...
WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot. WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot.
I am relatively new to Linux and Opensuse. I created the / root partition and now it is growing and maxing out. I have partitioner available to me but how do I change the partition size when the root partition is mounted. Do I login as root and then umount or modify fstab and restart and change from command line or do I format and reinstall everything? I have room to expand but not sure how to manage this?
View 4 Replies View RelatedI have a flash drive that I use to sync my work- and home-computers. Rsync has occasional issues syncing between FAT32 (which I use on my flash drive b/c it's universal) and EXT3.
I decided to create an EXT3 partition on the flash drive in an attempt to alleviate the rsync woes. My problem is that when I create the partition using GParted, Ubuntu auto-mounts it with Root as the owner. I had GParted check the drive, and it found no errors to repair.
One other weird thing is that the EXT3 partition shows 84.7MB being used immediately after creating the new partition.
The FAT32 partition mounts fine, is read/write, and only shows 4KB used after the new partition scheme.
I tried doing new partitions a number of times, with EXT2, EXT3, and EXT4 just to see if that mysteriously made a difference. Each time that partition would mount w/ Root as owner.
I'm slack 13.1, I am trying to install it, but always gives an error. I type cfdisk and appears this error:
Fatal error: bad primary partition 2: Partition ends in the final partial cylinde Press any key to exit cfdisk
Everything is installed and setup on my system, but when I setup my partitions I chose my Windows partition to be bootable. Can I just use cfdisk to toggle the bootable flag so my linux partition is bootable and rewrite the partition table?
View 2 Replies View RelatedI want to change the swap partition to another partition. Is there a gui that can make this process easier so I don't have to do things like manually editing files?
View 2 Replies View RelatedI installed Debian stable and I see these errors in the xsession error file
/etc/gdm3/Xsession: Beginning session setup...
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
SSHAUTHSOCK=/tmp/keyring-j0E6Br/ssh
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
[code]....
How do i re size my Slackware partition without deleting it and starting over, I'm new to Slackware and the work i have done i don't feel like doing again.I have set my swap and my actual HDD partition for Slackware to +8048M, I am correct in saying that fdisk can only delete and start fresh, I was a Ubuntu/Fedora user if i could get something like Gparted up that would be great but i don't mind some reading and learning some more terminal based stuff.Planning on working out the kinks and dealing with the learning curve, Love to learn.
View 12 Replies View RelatedI installed Fedora in an external hard drive, and encrypted all the file systems by using LUKS except /boot. What I want to implement is, every change on /boot is logged to encrypted file systems, in order to improve the security. I got a peek to audit, but it seems that audit is the tool which can only log down the information immediately. If one day, somebody gets my hard drive, and modifies the kernel or ram disk file, then returns it to me, how can I detect there is a modification on /boot?
One solution I got (which is not pretty good for me) is, I can use dd to make a whole image of /boot to my encrypted partition, and check whether the image and the /boot partition is the same after every boot...
I have a hard drive with Ubuntu 9.10 that I was running via USB that I installed in my laptop, however it will not boot because the partitions are not named correctly.
View 1 Replies View RelatedI want to make a new partion,my home is /dev/hda9,so I use the Partion Editor(Gparted) ,frist umount the device(umount -l /dev/hda9),then change the size,everyone thing works well until I clicked the Apply,the error occurred:
View 1 Replies View RelatedUbuntu is calling my Windows partition 20 GB Filesystem on the icon that is placed on the desktop.
How can I change this to say WindowsXP or something like that ?
I have gparted but can't change my ubuntu partition.
I guess that's because I can't unmount it. And... I guess my Ubuntu won't work if I unmount it? xD
So... I heard that I could use a Gparted live CD to do this.
The only problem is that I can't boot from a cd/dvd drive.
So, is there a option to change the partition size while running Ubuntu?
Or is there a option to somehow unlock all BIOS settings?
When I try to acess the BIOS settings it ask for a password, and I just press enter... And I come to a menu where I can't change anything. Is this because of wrong password? Or is the password right but everything is blocked?
I mean, I can't change boot priotiy to cd/dvd just HDD and LAN.
my HD is partitioned in 3 volumes. The one witch is Ubuntu installed, I can change the permissions normally. The other ones I try to change the permissions on the properties and on terminal using chmod, but none of those work. They work only in the Ubuntu partition.
View 1 Replies View Relatedchanging the bootble parttion in linux using lilo. Presently when i boot the system i will be booting from primary partition(/dev/sda1) . Is there any commando to change the bootable partition to secondary(/dev/sda2)
View 6 Replies View RelatedI have, as I have in the past, copy/pasted a partition using gparted to get a working OS to another place.
I have always done this in the past to a different drive. Never paid much attention to the UUID.
This time I did it on the same drive. The partitions have the same UUID. This is not a good thing.
The copied OS boots and mounts fine as I edited the fstab to go by /dev/sdxy (where x is the drive and y the partition). My grub uses a custom menu using symbolic menu entries so it goes by the partition definition instead of UUID too.
I would really like to change the UUID on that partition.
Is it possible to change the label name /sdb/usr to /sdb/test?
which means..need to change the partition name /usr to /test?
A couple of years ago, I got a 2TB drive and installed Debian on it.
I used the standard installation procedure, as I recall, and created three partitions, which are shown below in the output of "fdisk":
how to recurively change the owner of dir. for nobody user . for examplei have /parent_dir with owner root.now i change the owner to nobody(system user) recurively
View 2 Replies View RelatedChange Owner to Everyone, All Users, or *
How do I change the owner of a folder to Everyone?
In Windows, I can just right click folder > Properties > Security > Edit... > Add... > Advanced... > Find Now > Select "Everyone" > OK > OK > Set Everyone permissions > OK > OK. ^ See, so easy!
Every time I login or restart, I have to launch these commands:
Code:
I need to access the /var/spool/cups/ spool folder, but having to re-do that is so annoying.
I was installing opensuse 11.2 in parallel with windows xp.but during installation suddenly power has gone and after that opensuse is giving me the error message corrupt partition.i am also not able to login in xp. so I decide to reinstall windows, I got the error saying "invalid partition table" after the first restart of windows xp installation.
I tried to use windows system recovery console and committing fixmbr and fixboot commands, but didn't work.
i have 2 window partition(1 for windows and 1 for data).i do,nt want to format 2,nd partition.
How can I installed windows?My plan was first to install windows xp, then opensuse again.
Two days ago I repartitioned my laptop HD and added the latest Ubuntu (2.6.35-25-generic) to the existing Vista and existing Ubuntu (2.6.32-28-generic via upgrades from 9.14(?)). Prior to this install it was using Grub with menu.lst from the old/upgrade Ubuntu. After the install the boot menu labels the partition with Vista as the Windows Recovery partition and the recovery partition item is no longer present.
At first I wondered how I could get Vista to boot. I found that SuperGrub cd would boot it OK. Then, it dawned on me that the boot menu item was not the recovery partition, but instead the Vista OS partition mislabelled . Vista loads just fine from it. The recovery partition is no longer listed as it was with Grub/menu.lst. SuperGrub will not boot the recovery partition, showing an error "missing BOOTMGR".
'os-prober' produces--
root@Toshiba:/home/deh# os-prober
/dev/sda2:Windows Recovery Environment (loader):Windows:chain
/dev/sda7:Ubuntu 10.04.2 LTS (10.04):Ubuntu:linux
[code]...
I edited boot/grub/grub.cfg so the boot menu item is labelled correctly, but suspect that it will revert back when there is an upgrade.
I had a drive with a partition layout like so:
~50gig Windows 7 - NTFS
~100gig Ubuntu - EXT3
~100gig Snow Leopard - HFS+
~100gig Extended Partition
-- ~100gig Swap Disk - exFat
I wanted to delete the Snow Leopard partition and format the Swap Disk partition to something else. exFat was causing major file size bloat on small files. QT sdk bloated to like 11 gigs or something ridiculous like that. Anyways, I loaded up an Ubuntu 10.04 LTS live cd and gparted then deleted the Snow Leopard partition. Gparted said "Mission Accomplished" and tried to rescan the drive, but never found it. At this point I restarted the computer, a dell laptop, which didn't boot with an unable to find a bootable device error. The ubuntu live cd doesn't see the drive anymore. gparted scans for drives indefinitely and fdisk -l has no output.