Red Hat / Fedora :: Centos On Two Servers - Error When Trying To Install
Apr 3, 2010
I am trying to install centos on two servers. The first a dell power edge p4 2.4 ghz 512 ram, the other is a supermicro with almost the exact specs. I tried to install the centos cd, using roxio to create the disk, (then just for measures tested the cd on my laptop and it loaded just fine into the centos install gui.) But it says media error when I try it on the dell and blue screens the other server. However if I put the windows cd in on both the servers, the windows install goes perfect. Apologies again if this is misplaces but I just joined the site and have had a difficult time trying to find where to post. What I am trying to do in the end is run web servers using apache.
View 6 Replies
ADVERTISEMENT
Sep 8, 2010
I'm trying to install Fedora 13 VM on my CentOS 5.5 64 bit install following the below link. I used this same process to install a CentOS 5.5 VM just to test the process. Now when I try to follow it making changes for Fedora Im getting an error.[URL] config file:
kernel = "/install/vm/fedora/vmlinuz"
ramdisk = "/install/vm/fedora/initrd.img"
name = "fedora13"
[code]...
In the CentOS link I posted it said to use kernel from the xen directory.Ive found out that the last fedora version that shipped with xen was fedora 8. Does anyone know where I can find a fedora 12/13 xen kernel? Ive searched google for hours and can not find a xen kernel. Actually I'm to the point where I would even use ubuntu or any similar distro if I could find a xen kernel.
View 2 Replies
View Related
Jul 2, 2010
[URL]VMware Workstation 7.0.1 Release Notes has a list of supported OS:[URL]According to that, RHEL 5.4 is listed as supported for both host andguest but CentOS 5.4 is only for guest. This is quite strange and, ifit is true, that could be a serious issue.I succeed to install vmware workstaion 7.1 on centos 5.5, but have run-time error:
[root@ ~]# /etc/init.d/vmware start
Starting VMware services:
VMware USB Arbitrator [ OK ]
[code]....
View 7 Replies
View Related
May 24, 2010
I'm runing FC11 and have compiled the vanilla kernel 2.6.33.4 to support Dazuko. It has broken my NFSD server in the process, and I can't figure out why. I get these errors on boot. FATAL: Module nfsd not found. FATAL: Error running install command for nfsd
[code]....
View 2 Replies
View Related
Jun 3, 2010
My problem is configure and start FTP server on own computer. I edited configure files, and i try to run ProFTP. Then i see that communication: Launch proftpd: - warning: unable to determine IP address of 'dhcppc1'
- error: no valid servers configured
- Fatal: error processing configuration file '/etc/proftpd.conf'[FAILED]
View 3 Replies
View Related
Aug 26, 2009
when ever i give yum update am geting this error. failed to use search generator: failure:repodata/318b9912817ec3309c6defc47d79e878c52a21fd1457d191bb ff060fdb7f7f8d-primary.sqlite.bz2 from rpmfusion-free-updates: [Errno 256] No more mirrors to try. I was trying to install tomcat using yum. Is there any way i can install tomcat other than yum utility. I downloaded he zip folder for tomcat which i downloaded from apace tomcat site.
View 2 Replies
View Related
Jan 3, 2010
I am facing some strange problem of mysql replication with ssl, my replications which working fine from more than 6 months currently stopped working after i upgrade mysql in to newver version mysql-5.1.41-2, i create new ssl self singed certs but still no sucess, when client try to connect the master using ssl its gives error SSL connection error ERROR 2026 (HY000), with out ssl its working f9.
Platform --> Fedora-11 + mysql-5.1.41-2 (both master/client)
I can seeking the problem on net, and i found the below bugzilla url related to that.
[url]
I read it but not get , either new version support x509 ssl certs or not or either new version support ssl replication or not, here below my server configuration for ssl serts
And for client
Both server and clients certs are signed with same ca but still its currently not working after the mysql upgrade first 5.1.41 and then 5.1.41-2
Either as above bugzilla url, currently mysql support ssl replication or not, or either some need to do special for working with ssl. or i wait for newver version of mysql to fix if its bug or not.
View 2 Replies
View Related
Feb 27, 2009
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
View 1 Replies
View Related
Feb 1, 2011
I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
View 3 Replies
View Related
Nov 4, 2009
I am not sure why it does not install, it hangs(hangs for 10 minutes) and the only way to get out of it, is to ctrl-c, and then it gives error yum install amavisd-new
[Code]....
View 3 Replies
View Related
Feb 13, 2009
When we try to install the php 5.2, it try to install mysql-libs 5.2 that confilict with files from previous mysql installation. We have tryed all kinds of methods found off google and no luck.
Transaction Check Error: file /etc/my.cnf from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5 file /usr/share/mysql/charsets/Index.xml from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5 file /usr/share/mysql/charsets/README from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5
file /usr/share/mysql/charsets/ascii.xml from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5 file /usr/share/mysql/charsets/cp1250.xml from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5
[Code]...
View 3 Replies
View Related
Apr 26, 2011
I have installed Ubuntu 10.04 LTS server 32 Bit. Now have to install FTP package in my sever i dont have internet connection but i have downloaded the vsftpd_2.0.4-0ubuntu4.1_i386.deb file but while installing i get the following error.
# dpkg -i vsftpd_2.0.4-0ubuntu4.1_i386.deb
(Reading database ... 42228 files and directories currently installed.)
Unpacking vsftpd (from vsftpd_2.0.4-0ubuntu4.1_i386.deb) ...
dpkg: error processing vsftpd_2.0.4-0ubuntu4.1_i386.deb (--install):
[Code]....
View 9 Replies
View Related
Sep 28, 2009
I was wondering how i can install thru FTP and/or HTTP if the source-path isn't correct recognized by the installer. e.g. http install
Server name:
The installer recognized
[url]
And i can't start the directory without a slash. So, the installer never will find the files it is looking for. Using CentOS 5.3.
View 5 Replies
View Related
Jul 9, 2010
System os: CentOS 5.2 32 bitI installed squid and it is proxy server.Later, i install sarg to monitor web log of client...But when i install from rpm package, it show errorQuote: #rpm -ivh sarg-2.2.3-1.el5.rf.i386.rpm error: sarg-2.2.3-1.el5.rf.i386.rpm:pmReadSignature failed: region trailer: BAD, tag 15872 type 2047 offset 28672 count 4238 error: sarg-2.2.3-1.el5.rf.i386.rpm cannot be installed
View 7 Replies
View Related
Feb 7, 2009
I've installed a server (CentOS5.2) - and I need a new(er) PHP, so, I get me one. This is what I did:
- unzipped the bundle in the root's home
- of course, I entered the folder
- entered "./configure"
- entered "make" - the compile didn't come back with errors
- entered "make test" - there was a _possible_ fail...
- entered "make install"
I noticed there's nothing in the /libs, where I'd expect a module (lib5php5.so) to exist. there is one, but it belongs to the older PHP. It's located in ets/httpd/modules (a link BTW - but I think that's normal). At the console I type:
"which php" and get a path to PHP /usr/local/bin/php
"php --version" and get 5.2.8 and some extra info
in the server I entered "<?php phpinfo(); .>" in a PHP page, as I call that page, I get ... 5.1.6 as version.
Of course, I suspect Apache to have the OLD PHP in its config, (the old lib5php.so) and that I may have to overwrite the old one with the newly compiled one, if I had it. I ran a locate on the system, but no other lib5php.so files exist. Where did I loose track?
View 2 Replies
View Related
Mar 11, 2011
I installed BIND 9.7.3 from source on Centos 5.5, and chrooted it, and I'm getting an error when I run 'service named status' I get a reply, but at the end it says 'named dead but pid file exists'
Here's the entire output:
[root@ns etc]# service named status
version: 9.7.3
number of zones: 23
debug level: 0
xfers running: 0
xfers deferred: 0
soa queries in progress: 0
query logging is OFF
recursive clients: 0/0/1000
tcp clients: 0/100
server is up and running named dead but pid file exists Nothing is logged in /var/log/messages. Named is running and responding correctly. How can I get rid of this error?
View 5 Replies
View Related
Mar 18, 2011
I'm trying to install Centos 5, but I keep getting this error. It will say that, then hdc: lost interrupt. Anyone know what this is?
View 6 Replies
View Related
Oct 5, 2010
I am trying to install Jinzero a media server on my ubuntu server.
I already had apache2 installed and have installed php5 etc.
When I try to access index.php I get an http error 500 and when I check the logs of my apache2 it shows:
PHP Code:
View 1 Replies
View Related
Jan 17, 2011
I'm trying to install citadel server on ubuntu server 10.04 via apt-get install citadel-server. I get an error at:setting up citadel-server (7.71-1)export: 106: 007: bad variable namedpkg script exits with error code 1.would this be due to unmet dependency?WalterPS. filed a bug in launchpad
View 2 Replies
View Related
Jun 10, 2011
I installed ubuntu server and got it set up, and im trying to install shorewall as a firewall, but whenever i do sudo apt-get install shorewall i get a package not found error.
View 5 Replies
View Related
Sep 27, 2010
I'm trying to add a file in svn and the following error occurs:
Code:
View 3 Replies
View Related
Dec 24, 2010
I moved from F12 to F14, I've installed using yum Apache, MySql, php, phpMyAdmin. That all works fine, I've made index.php with phpinfo() function and if it is in /var/www/html/ it opens in web browser. I extracted daloradius-0.9-8 in /var/www/hmtl/daloradius folder changed ownership to apache:apache set alias to myradius. When I point web browser to localhost/myradius I get error 403, forbidden. I moved index.php with phpinfo() to daloradius (overwriting old index.php) and same stuff happens. Error 403. What am I doing wrong?
View 4 Replies
View Related
Oct 19, 2009
I have just done a reinstall of Centos 5.3 on a dedicated server (via a KVM). My partition arrangement was the default presented to me by the installer:
As you can see, I'm using LVM for everything other than /boot (I need to use LVM for an app I am testing).
On reboot, I get the following:
[QUOTE]
It looks like it can't find vmlinuz-2.6.18-128.el5 in /boot.
I have rebooted using the Centos Install Disk 1 and gone in to rescue mode. Rescue mode mounted my / under /mnt/sysimage, from there I could see that /boot had been mounted from /dev/sda1 as it should be.
However, there was no initrd.image or /vmlinuz-2.6.18-128.el5 under /boot or /boot/grub. Shouldn't the CentOS installer have created these?
Is there anyway I can recover this installation?
View 1 Replies
View Related
Nov 13, 2009
While attempting to install CentOS 5.4 x86_64 from DVD (downloaded torrent), I encountered a fatal error that aborted the install and dumped a bunch of log files. I attempted this a couple of times resulting in the same error. I tested my hardware via CentOS 5.4 x86_64 live cd without exception. Here is my install configuration:
1)Booted to DVD
2)Skipped media test
3)English (English)
4)U.S. English
[Code]....
View 8 Replies
View Related
Nov 19, 2009
I am quite new to centos as I am from a windows back ground and trying to change over. I am trying to install Asterisk on a dell quadcore server running centos. I need to install Dahdi for hardware support but when I try to install it I get the following error You do not appear to have the sources for the 2.6.18-164.6.1.el5 kernel installed I don't have a clue
View 2 Replies
View Related
Feb 9, 2010
I get "403 Forbidden You don't have permission to access" after attempting an installation of phpmyadmin.
CentOS 5.4
Permissions for directory set to 755 recursively (chomd -R 755 <directory name>)
Directory is in /var/www/html/
I have other test pages in the /var/www/html/ directory that I can access ... I know this seems like a permission issue and in fact the error log states this is a permission issue, but I cannot figure what is the problem here.
View 16 Replies
View Related
Jan 29, 2011
Every time I selected addons and Mysql i got a notice of a bug report. So i gave in and only selected server and it is installing. I hope i can read enough to get it installed..
View 1 Replies
View Related
Jul 21, 2011
I have installed Centos 5.6 on a fresh VPS. After install I ran yum update command. After update was finished I noticed a message saying "Your system kernel may have been updated. Current kernel (2.6.18-238.e15) has been changed to : 2.6.18-238.12.1.e15)". When I reboot, I see two boot option in GRUB. one is Centos 5.6 (2.6.18-238.12.1.e15) Default and other is Centos 5.6 (2.6.18-238.e15). When Centos boots from default, it fails with fatal error. But when I boot with other option, the system boots as normal.
I need to know how to resolve this situation. Why yum update results in Kernel update and 2nd option in GRUB boot loader. and why Centos refuses to boot with update Kernel.
View 10 Replies
View Related
Dec 1, 2009
i try today to install Firestarter , unfortunately i got some problems regarding of the following messages:
1- insufficient privileges :
2- how can i change and save the file /etc/sbin/firestarter with visudo cammand
3-i got this message when i try to run it through terminal Error reading /proc/net/ip_conntrack: No such file or directory
View 5 Replies
View Related
Jan 20, 2011
I am using Cygwin and Xming server to bring back the display from Linux server to a Windows machine.
I am following the below steps :-
1.Close down all X Servers
2.Run XMing - XLaunch
3.Select Multiple windows
4.Select Start no clients
5.Tick No Access Control box
6.Click Finish
7.X Server starts and you should see icon in tray
8.Run Putty/SSH in Cygwin
9.SSH to server you want to connect to
10.Enter: export DISPLAY=192.168.0.1:0.0 (replace 192.168.0.1 with your IP)
11.Run dbca.
On using similar steps I can bring back the display from some Linux servers, but not from others, can you please let me know what the problem is and what things I need to verify. I am not getting any error, some of the last lines from the message in the log states :-
winProcEstablishConnection - winInitClipboard returned.
winMultiWindowXMsgProc - XOpenDisplay () returned and successfully opened the display.
winClipboardProc - Hello
DetectUnicodeSupport - Windows XP
winClipboardProc - DISPLAY=127.0.0.1:0.0
winInitMultiWindowWM - XOpenDisplay () returned and successfully opened the display.
winClipboardProc - XOpenDisplay () returned and successfully opened the display.
I did a grep X11 /etc/ssh/* the result is as following :-
/etc/ssh/ssh_config:ForwardX11 yes
grep: can't open /etc/ssh/ssh_host_dsa_key
grep: can't open /etc/ssh/ssh_host_rsa_key
/etc/ssh/sshd_config:# X11 tunneling options
/etc/ssh/sshd_config:X11Forwarding yes
/etc/ssh/sshd_config:X11DisplayOffset 10
/etc/ssh/sshd_config:X11UseLocalhost yes
View 1 Replies
View Related
