I was wondering how i can install thru FTP and/or HTTP if the source-path isn't correct recognized by the installer. e.g. http install
Server name:
The installer recognized
[url]
And i can't start the directory without a slash. So, the installer never will find the files it is looking for. Using CentOS 5.3.
I've tried to install Wine but I get this error: [Errno 14] HTTP Error 400 :http://linuxdownload.adobe.com/linux...ata/repomd.xml Trying other mirror.Error: Cannot retrieve repository metadata (repomd.xml) for repository: adobe-linux-i386. Please verify its path and try again Not sure what is happening here. Can anyone give me some idea and maybe a way to overcome it?
View 4 Replies View RelatedI have a problem with GPG key, when I tried to run #yum updateI have got this errorwarning:rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID d05c057cGPG key retrieval failed: [Errno 14] HTTP eRROR 404: Not foundI used Centos 5.5.
View 10 Replies View RelatedI've been attempting to setup PXE/HTTP network installs so we can better handle deployments for new systems. I have a test CentOS 5.4 VM running, and another test VM that I want to deploy 5.4 to. TFTP, DHCP are all working correctly. Apache 2.2.3 config "seems" OK. When I kick off the VM which I will install to, DHCP discovery and IP allocation works, the TFTP server is found, I am presented with a menu option of OS selection.
I choose #1, for my 5.4 but then it immediately tells me:
"Invalid or corrupt kernel image"
/var/log/messages doesnt show anything other than the DHCP OFFER/ACK process and that TFTP client doesn't accept options
/var/log/httpd/error_log doesnt show anything either
Not sure where else to look for diagnosis.
My Apache config directory: /var/www/html/CentOS
Content listing:
[root@CentOS-test CentOS]# ls -la
total 4515700
drwxr-xr-x 4 root root 4096 Jul 9 10:38 .
drwxr-xr-x 3 root root 4096 Jul 8 16:46 ..
-rwxrwxrwx 1 root root 4619468800 Jul 6 15:54 CentOS5.4.iso
-rwxrwxrwx 1 root root 932 Jul 6 17:37 initrd.img
-rwxrwxrwx 1 root root 70 Jul 6 17:37 ks.cfg
drwxr-xr-x 2 root root 4096 Jul 9 10:38 msgs
-rw-r--r-- 1 root root 13100 Jul 9 10:37 pxelinux.0
drwxr-xr-x 2 root root 4096 Jul 9 10:38 pxelinux.cfg
-rw-r--r-- 1 root root 932 Jul 9 10:33 vmlinuz
pxelinux.cfg contains:
0A000000
default
pxeos.xml
My Apache DocumentRoot: /var/www/html/CentOS
Directives:
<Directory "/var/www/html/CentOS">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
Forgot to add this line from my pxelinux.cfg/default file:
label 1
kernel 5.4/vmlinuz
append initrd=5.4/initrd.img ramdisk_size=16000 method=http:/10.37.129.3/CentOS ip=dhcp
(I think I have found my problem.. 5.4 was in the TFTPBOOT directory, but now that I'm using HTTP, I changed this to be:
kernel CentOS/vmlinuz and append initrd=CentOS/initrd.img) -- question is, will just changing this work?
When I attempt to install a new hardware system over the wire via NFS I get the following error:"unable ro retrieve http://192.168.0.1//install/images/stage2.img."The httpd.conf file is configured to use /var/www/html as the root. I have placed the installation files in /var/www/html/install. In the http install screen I enter the following information:Web site name: 192.168.0.101CentOS directory: installI have tried many different variations in these two entires, but the error always is the samw: the installation script searches for an address which has an extra / character interposed between the server IP address and the directory path entered in the next line.
View 6 Replies View RelatedI have a problem installing CentOS 5.5 over lan. I set up a dhcp3 server and it works, client got an ip. I set up a tftpd-hpa server and it works, client can boot the install image of CentOS 5.5 I set up an apache server and it seems to be impossible... In the installation marathon I clicked through the menu to the choice of the web server where my installation files are available. I enter the ip 192.168.138.1 and the path CentOS-5.5 and CentOS tells me "Unable to retrieve http://192.168.138.1//CentOS-5.5/images/stage2.img" . Thats right because the two slashes are not right. Where the hell come the two slashes from???
I edited my httpd.conf like this:
<Directory /tftpboot/CentOS-5.5>
Options Indexes
AllowOverride None
</Directory>
[Code]....
I am trying to install Jinzero a media server on my ubuntu server.
I already had apache2 installed and have installed php5 etc.
When I try to access index.php I get an http error 500 and when I check the logs of my apache2 it shows:
PHP Code:
[URL]VMware Workstation 7.0.1 Release Notes has a list of supported OS:[URL]According to that, RHEL 5.4 is listed as supported for both host andguest but CentOS 5.4 is only for guest. This is quite strange and, ifit is true, that could be a serious issue.I succeed to install vmware workstaion 7.1 on centos 5.5, but have run-time error:
[root@ ~]# /etc/init.d/vmware start
Starting VMware services:
VMware USB Arbitrator [ OK ]
[code]....
I want to use http protocol for my localdomain's yum. This is the base tag of current local.repo which is using ftp.
[base]
name=Base repository for localdomain
enabled=1
baseurl=ftp://192.168.100.1/pub/os/i386
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-5
In my workplace, I can't update Centos using http protocol, but, it's possible with ftp (I tried with Debian and it's work). How to configure the repositories in Centos 5.5, to download the packages by FTP?
View 4 Replies View Relatedrunning Ubuntu 10.10 and mozilla and seamonkey... Tried to access a website: [URL] and got the error: The page cannot be displayed You have attempted to execute a CGI, ISAPI, or other executable program from a directory that does not allow programs to be executed. Please try the following: Contact the Web site administrator if you believe this directory should allow execute access. HTTP Error 403.1 - Forbidden: Execute access is denied. Internet Information Services (IIS)
View 1 Replies View RelatedSomebody know anyway to install Centos with http install into a vlan network? I need to tag interface during ip-confgiration.
View 1 Replies View RelatedMy ISP has a bad habit of killing nearly all sustained FTP transfers (reset packet to my router and the remote host) and I need to install CentOS 5.5 on an older pc that doesn't have a DVD drive. My solution would be to (temporarily) turn on IIS on my laptop and extract the contents of the DVD to the ftp dir, but do I simply just drop everything in there with the same directory structure as the DVD or is there a particular way I should set up the directories?
View 3 Replies View RelatedUsing netcat, nc(1), craft a valid http/1.1 request for getting http headers (not the html file itself!) for the main index page of www dot aalto dot fi. What request method did you use? Which headers did you need to send to the server? What was the status code for the request? Which headers did the server return? Explain the purpose of each header.
nc -v www dot aalto dot fi 8080
HEAD / HTML/1.1
host: www dot aalto dot fi
And it returns:
200 OK
Content-Length: 858
Content-Type: text/html
Last-Modified: Thu, 02 Sep 2010 12:46:01 GMT
[Code]....
I really don't know what does it mean. Question 2: Using netcat, nc(1), start a bogus web server listening on the loopback interface port 8080. Verify with netstat(, that the server really is listening where it should be. Direct your browser to the bogus server and capture the User-Agent: header "Direct your browser to the bogus server and capture the User-Agent: header" I don't understand this question.
I installed Nagios on my Ubuntu 10.04 server using apt-get and when I accessed the web console, everything was OK. I made some changes to apache (creating some new virtual sites) and since then Nagios gives me a warning message for HTTP with the message, HTTP WARNING: HTTP/1.1 404 Not Found. The sites that I created are working perfectly. I noticed that the attemps are 4/4. Does this need to be reset or does Nagios automatically reset that once it detects the issue is resolved?
View 1 Replies View RelatedI am having a problem with 5.4 that I did not have with 4.5. The problem happens only sometimes but in specific instances. Basically a summary of the problem is that certain network transactions timeout. The specific instances are with wget, rpm, http. The problem usually, but not always, occurs with pptp stuff. (NOT running pptp but getting pptp stuff). For instance, the following command, which finishes in seconds on non-5.4 OS's:
wget [URL]
downloads about 20% then gets stuck. About 5 minutes later it downloads another 20% and then gets stuck, etc. The same thing with rpm:
rpm -ivh [URL]
waits about 3 minutes and then gives an error. I think it does the same thing as the wget but
wget will keep trying, while rpm gives up. The error from rpm:
Retrieving [URL]
..five minutes later:
I can wget the above as I mentioned before and install it that way. Before I do it, yum works fine. Afterwards, yum exhibits the same behavior of timing out (because it is using the pptp repository). Also visiting the pptp web site from Firefox times out on certain pages. I originally thought it was some problem with the pptp site, but I notice that log into hotmail.com. Does the same thin (fine on other operating systems). A view with Wireshark on the wget (pptp) shows the my machine receiving a reassembled TCPPDU from 216.34.181.96 (Sourceforge), sending an ack, receiving a reassembled PDU, sending an ack, receiving, sending followed by the 5 minutes or whatever of nothing. Then sourceforge sends an RST and a SYN and the process is repeated.
When I put the machine directly on an AT&T IP connection (12.147.X.Y) everything worked fine. Same with Comcast on a direct link. The times I am having problems is when our router is hooked up to a Comcast IP (70.88.X.Y) and assigns 192.168.5.X addresses to our machines. So when I was doing the above from 192.168.5.27 going through the router through Comcast is when I had the problem. So it is probably something with the router, but it is hard to figure out since CentOS 4.5 and Fedora do not exhibit this behavior, nor does 5.4 on most sites (mail.yahoo.com for instance). I did verify, at least from what I could, that ICMP type 3 and 4 are not being blocked. If they were, the same problem would happen on other op systems. And I was able to ping, albeit just locally, but we looked at the router settings and ping was not blocked.
I'm trying to set up a server for an NPO who connects to the Internet through an internal proxy (Websense). I can't access the Internet unless through the proxy.
Since it's a server I did not install a GUI so I'm wondering how to connect the new server to said proxy server. I have the IP address, port number and username-password for the proxy server. The new server has a static IP address and is ready too go!
I recently installed fedora 12 x86_64 after learning that its faster than x86.Now i am getting error while updating:after getting all the filelists etc. it shows all the packages to be updated, all is usual untill now, but then it again starts downloading filelistsdb which never happened in any fedora installation before including x86 fedora 12.
error:
fedora/filelists_db | 17 MB 26:33
url...ts.sqlite.bz2: [Errno 14] HTTP Error 302 : url...sts.sqlite.bz2
Trying other mirror.
code....
friends <
I tried installing amanda like this:
yum -y install amanda*
Gathering header information file(s) from server(s)
Server: Fedora Linux / stable for Red Hat Linux 3ES (i386)
[code].....
I tried yum because when i did the simple download o the newest amanda rpm and tried t install.. i get the following dependency problem..
[root@Mixer amanda-dwnload]# rpm -ivh amanda-backup_server-3.1.0-2.rhel4.i386.rpm
error: Failed dependencies:
libcurl.so.3 is needed by amanda-backup_server-3.1.0-2.rhel4
libidn.so.11 is needed by amanda-backup_server-3.1.0-2.rhel4
tar >= 1.14 is needed by amanda-backup_server-3.1.0-2.rhel4
I do have yum installed -- that s when i do
yum --version
2.0.3
i see a vers num.it is a redhat system
uname -a
Linux Mixer 2.4.21-58.EL #1 Tue Nov 4 11:55:15 EST 2008 i686 i686 i386 GNU/Linux
---
cat /etc/issue
Red Hat Enterprise Linux ES release 3 (Taroon Update 9)
[code].....
i am forwarding HTTP request to a internal server, it is quiet successful but access logs donot show the ip of the external m/c. Rather it shows the ip of the machine on which i have enabled port forwarding.
View 2 Replies View Relatedafter i installed some linux mint packages, i get the following error. W: GPG error: http://ppa.launchpad.net lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 55708F1EE06803C5
its not related to the mint packages because i installed the keyring for that and since the error i have unchecked the linux mint repo. i have tried reinstalling the ubuntu-keyring package with no luck.
I have configured a virtual host. Here is what I have did,
<VirtualHost rubby.tob.net:80>
ServerAdmin root@localhost
DocumentRoot /var/www/html/
ServerName rubby.tob.net
# ErrorLog logs/dixie_error_log
ErrorLog syslog | local8.*
CustomLog logs/rubby_access_log common .....
The problem here is how to point the error log to syslogd. Here is my syslog file,
#vim /etc/syslog.conf
og all kernel messages to the console.
# Logging much else clutters up the screen.
#kern.* /dev/console
# Log anything (except mail) of level info or higher.
# Don't log private authentication messages! .....
If I point the file, separatelt at httpd.conf for the errorlog, I'm getting the errog log. I'm using Centos 5.6.
Code:
Andrew@Mac:~$ g++ -march=athlon64-sse3 -O2 Projects/omgarrays.cpp -o Desktop/omg
Projects/omgarrays.cpp:1: error: bad value (athlon64-sse3) for -march= switch
[code]....
Some time yesterday, I lost the ability to ssh my remote server, or even visit any webpages it hosts.
I've explored hosts.deny, /var/log/secure and even turned iptables off to see if it would fix anything. To no avail. Here's what my ssh login attempt looks like:
Quote:
localhost ~ $ ssh -vv x.x.x.x
OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
[Code]....
I am not sure why it does not install, it hangs(hangs for 10 minutes) and the only way to get out of it, is to ctrl-c, and then it gives error yum install amavisd-new
[Code]....
I have been windows using for over years and now after seeing Linux in couple of colleagues desk, I liked and have installed Linux in my home desktop (Fedora 14). After installing Fedora 14, I tried upgrading my browser Firefox from 3.6.17 (which came by default) to Firefox 4.0. I googled and got the procedure for upgrading tirefox. from this link [URL]. I followed the exact steps and while I tried to install I get the following error. I tried enough to get rid of this problem but all attempts in vain.
The Error that I get is:
[root@localhost yum.repos.d]# yum install firefox4
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora-firefox4. Please verify its path and try again
[root@localhost yum.repos.d]# yum install firefox4
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
repos.fedorapeople.org/repos/spot/firefox4/fedora-15/i386/repodata/repomd.xml:
[Errno 14] HTTP Error 404 : repos.fedorapeople.org/repos/spot/firefox4/fedora-15/i386/repodata/repomd.xml
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora-firefox4. Please verify its path and try again
[root@localhost yum.repos.d]# ls
When we try to install the php 5.2, it try to install mysql-libs 5.2 that confilict with files from previous mysql installation. We have tryed all kinds of methods found off google and no luck.
Transaction Check Error: file /etc/my.cnf from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5 file /usr/share/mysql/charsets/Index.xml from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5 file /usr/share/mysql/charsets/README from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5
file /usr/share/mysql/charsets/ascii.xml from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5 file /usr/share/mysql/charsets/cp1250.xml from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5
[Code]...
I've been running a SuseStudio-built VM for a few weeks with no issues. I built a new one recently, and now I can't configure a new vhost in Apache using the http-server module. It gives me this error. Screen shot 2010-11-06 at 11.42.24 AM.png. Why YaST suddenly decided that my hostnames aren't valid?
View 1 Replies View RelatedWhen I run sudo apt-get update I get the following message at the bottom:
[Code]....
I have tried numerous ways to add the keys i.e: gpg --keyserver keyserver.ubuntu.com --recv-keys EF4186FE247510BE && gpg --export --armor EF4186FE247510BE | sudo apt-key add - However, I then get the following message:
[Code]....
When I run the update manager and start updating, I get this error:
W: Duplicate sources.list entry http://archive.canonical.com/ubuntu/ lucid/partner Packages (/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_lucid_partner_b inary-i386_Packages)