Fedora Installation :: Shrinking Vista Partition Won't Shrink Much - Having 20GB Free Space?
Aug 16, 2009
I have just over 20GB of empty space on C:. When I click it under disk-management, the window comes up and says I can only resize it 192 MB less than what it is. But I have 20GB free. Any ideas on what is wrong? I also have this odd 9.56GB partition that is empty. DM says it's "EISA configuration"...whatever that is. I am planning to allocate about 10GB for F11 if this pans out ok.
View 6 Replies
ADVERTISEMENT
Nov 22, 2010
Im trying to shrink a 80 Gb ntfs partition. but when i clicked the shrink option the partition is like this:
"sda1(ntfs,0 mb)".
how to free up space in creating custom layout.
View 1 Replies
View Related
Apr 26, 2011
I shrinked the /home partition using resize2fs command by 1GB and what had happened to remaining my free space .
View 1 Replies
View Related
Jul 13, 2010
Using a small hard drive (180 GB) dual booting windows XP for gaming and Ubuntu 9.10 for my other stuff during install I didnt know how much of each partition i would use, so i did 50-50 1 for ext3 and one for NTFSHowever after awhile it seems I have run out of space on my NTFS and have tons of unused space on my ext3.What I am wanting to do is shrink some of that ext3 down and give it it NTFS, I did a little searching and found a couple of old posts but I was a little sketchey on em. Simply looking for some personal Methods or Tools you have used and a starting point of how to use them.
View 5 Replies
View Related
May 18, 2011
I've got a question on free disk space. I'm currently running CentOS 5.5 on in Xenserver virtual environment. We've had an issue with disk space. My question is as follows: - from a ssh connection i run df -h this gives the value of 90% used leaving me with 9GB. If I use system monitor via a VNC connection the free disk space value is 20GB free on the same volume. Which one is correct? I do use SNMP to monitor the same volume and should alert me when < 10% is free I know this works as I set the alert threshold to < 90% I get an alert.
View 2 Replies
View Related
Oct 26, 2009
this might deviate from "installation" theme.. I'm writing an immediate problem since the last thread: [URL] problem is the vista partition is impossible to shrink now, though there's 50 G free space. Every try found in : [URL] does not work including Perfect disk degrag. I think this is because fedora system is there. some code is written to vista partition..that vista cannot handle.....
View 2 Replies
View Related
Nov 5, 2009
I now have Windows XP installed, with 30GB of free space on the end of my hard rive. If I install linux there, will it cause Windows XP to fail? Last time I tried this, it says hal.dll was not found. However, that may have been caused by having five partitions. Do u think its safe now that I'll only have 4? Will Windows XP fail if I put in a partition in the free space?
Why does it says I'm using Safari in Windows, I'm using Google Chrome
View 3 Replies
View Related
May 17, 2010
I just downloaded the new fedora and proceed to install it into a free space of 11GB on my HDD. As such the partitioner is unable to create more than 1 partitioneven if free space is available, it reports not enough free space seen if its present. As such it can create only one of the three partitions i.e., swap or / or /home duw to which cannot proceed ahead.' Some more details me running Xp as the other OS on my system.
View 10 Replies
View Related
Jul 12, 2010
having trouble consolidating the free space on their Windows Vista partitions.
Most of the information you need is here: [URL]
The problem is that there may still be some system files running in the background that prevent all of your free space from consolidating. For some reason, I didn't find many partitioning guides that mention this.
If you find at Step 11 that your shrink space is still abnormally small, what you need to do is go back and open PerfectDisk. With "Consolidate Free Space" selected in the drop down box, click the "Boot Time" button. This allows PerfectDisk to consolidate free space while your hard drive is offline. Once this is done, go back to Step 10 and everything should work from there!
View 1 Replies
View Related
Apr 5, 2011
I have serwer Debian with my website. My provider splited the disc into 5GB partition for / and 495GB partition for /var. Everything was going ok for over two years but now I don't have enough memory on /. I'd like to increase the partition but the problem is that /var is just next to it so I can't easily change the end of the first one. I need some safe solution. It might be even just shrinking partition for /var, adding new one after if it helps anyhow (I have about 450GB free memory).
Some outputs
Code: # df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 5201536 5173904 0 100% /
tmpfs 1023464 0 1023464 0% /lib/init/rw
udev 10240 2672 7568 27% /dev
tmpfs 1023464 0 1023464 0% /dev/shm
/dev/sda2 478812280 10336484 444345032 3% /var
overflow 1024 4 1020 1% /tmp
# parted print
GNU Parted 2.3
Using /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
Model: ATA ST3500418AS (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 512B 5369MB 5369MB primary ext3 boot
2 5369MB 500GB 494GB primary ext3
3 500GB 500GB 538MB primary linux-swap(v1)
View 2 Replies
View Related
Jan 24, 2011
I have a notebook with dual boot windows and Ubuntu 10.10 on a 80 Gig hard drive. The windows XP partition was initially installed and took up the whole drive (dev/sda1). I then freed up some space and created and installed Ubuntu (/dev/sda6) and swap (/dev/sda5) on an extended partition (/dev/sda2). Initially I only freed up 3.6 Gig which I thought would be more than enough but not any more. I cannot even install the updates as there is only 100 Meg left which is not enough. I then freed up more space (8 gig) from the windows partition to allocate to Ubuntu.
My problem is that I can't seem to find to now allocate this "freed-up" space to Ubuntu? I realise that I have to boot-up from a the Ubuntu live disk so that the hard drive is not mounted to allow changes but I'm still unable to change the partitions. I'm using GParted.
The drive looks like this currently:
[...NTFS] [...Unallocated] [...Extended{(ext4),(linux-swap)}]
View 2 Replies
View Related
Nov 28, 2009
I have a computer with windows xp on it, and i want to dual boot with fedora 11. I have 2 hard drives in it, 1 500gb HD and 1 350gb HD. the 350 isnt much concern b/c its just sitting there all free and unpartitioned right now. Now my 500gb is split into 3 partitions, a 20gb(with xp installed on it) a 105 gb with pretty much nothing on it and a 350gb with all my data.
My problem is I'm trying to resize my 20gb partition through the fedora 11 installer and when I tell it to resize say to 10gb it starts and fails the resize. its a NTFS partition and the windows stuff on the partition is only about 8gb. any idea whats going on? the only error I get is "The resize has failed"
View 3 Replies
View Related
Oct 10, 2010
I recently installed ubuntu alongside windows 7 on my machine. I ardly know anything about partitions, but I managed to shrink the windows partition to make space, abd then use the ubuntu installer to create the ubuntu partition. But I hadn't realized that there were actually 3 Windows partitions - "Acer C:", "Recovery", and "System, Active, Primary Partition".
So I didn't know that I should have made the ubuntu partition "Extended", which means that I can't make new partitions anymore. Is there anything I can do without reinstalling ubuntu?
View 9 Replies
View Related
Apr 28, 2010
I'm a new user to Linux & Ubuntu. My system is Windows 7 in one partition, one partition has free space to load my data, another partition is present to load Ubuntu. Can somebody please tell me how to go about the installation process when I'm already having an OS preinstalled?
View 1 Replies
View Related
Feb 26, 2011
Some months ago I decided to give a chance to this 'Linux thing'. However, being uncertain of the usefulness and friendliness of it all, I decided to keep my Windows 7 partition untouched and just make a 30 Gb partition to "try out" Linux. As it turns out, it's been some 2 months since I last booted Windows and was now wondering if there's a way to "steal" some space from that W7 partition and add it to my Ubuntu one without messing up files. Some kind of major defragmentation, leaving an empty part of the disk which I could "attach" to my Ubuntu partition. I am using Ubuntu 10.04 LTS version.
View 3 Replies
View Related
Jun 7, 2010
I was trying to install Fedora 13, on to my laptop. I have 30 GB of unallocated space in extended partition. When trying to install Fedora 13, I got stuck, as the installer says that there is no free space for installation.can convert the unallocated space into free space.
View 1 Replies
View Related
Jan 24, 2011
I had installed Ubuntu 10.10 on a W7 OS, as a dual boot. I have removed Ubuntu, and now have that space as "free space". Between the original partition (c:) and the free space, there is a partition that contains the laptop mfg's factory image. I want to recover that free space back to the original c: partition. I was reading about GParted, but do not want to attempt anything until I have some expert advice.
View 1 Replies
View Related
Aug 22, 2011
restore a partition images on another machine to the unused space on my laptop. I'm using netcat and dd to restore the partition.
On laptop:
nc -l 192.168.192.254 9000 | dd bs=1024 conv=notrunc,noerror seek=<some block pos> of=/dev/sda
On W/S:
dd if=part.img bs=1024 | nc 192.168.192.254 9000
The problem is that fdisk -l displays start & end sectors of the partitions and I need to know blocks. How do I determine the block number after the last partition to start writing this image?
Quote:
cat /proc/partitions
Displays blocks per partition. I could add those numbers up but is sure would be nice to have a utility that just give you what you need.
View 4 Replies
View Related
Dec 7, 2009
I have decided that my partition table does not meet my needs Barrymore, and I want to shrink the "/" partition by 80GB, and then create another file system on that space. I did some research on-line, and I'm not sure which way is the easiest and more secure way to perform the change with out putting the "/" file system on risk.
View 1 Replies
View Related
Apr 22, 2011
Whilst in fedora i deleted files off my second hard drive to free up some space, i deleted over 10gb worth of data. When booting back in to my windows partition it doesnt recognize the free space instead it thinks the hard drive is still full even though i deleted the data.Not to sure as to why this has happened, as im sure i have deleted stuff of this hard drive before from my linux partition.Any help would be greatly appreciated as my 70gb hard drive is full with only 20gb of data to show for it
View 2 Replies
View Related
May 29, 2011
I have around 30gb of free space in my partition table immediately before the Linux partition. I want to resize my linux partition to take up this space.
I tried booting with live cd, sucessfully umounted the hard drive but found I could not resize the partition. On clicking the 'edit size' button, partition manager recognised the free space before the partition but when i reduced this, the 'ok' button was greyed out. (it was not greyed out for the windows partition so I could, in theory, increase the windows partition to take up the free space but this is not what i wanted to do).
I am pretty sure that I had managed to unmount the drive correctly as the padlock symbol had dissapeared (I took the attached screenshot, which does show the lock symbol, after rebooting into my normal system).
Anyone got any ideas as to why it wont allow this? There is no reason why i can resize the partition to take up the free space BEFORE it is there?
View 9 Replies
View Related
Dec 15, 2010
My debian 5 is up and running smoothly and act as file-server in the middle of windows network jungle using samba the only problem is, after backup an external hdd (213 GB) to my /home partition, I end up with message say that I'm running out free space. Fyi my debian installed on 1TB SATA disk, and I separate my /home partition from system what happen to my free space ? here is screenshot of my disk, using disk usage analyzer: is there is a way to get my space back or something missing on my setup.or I have to reinstall my debian and use LVM when partitioning my disk?
View 8 Replies
View Related
Jun 15, 2010
Currently, my partitions are set up as such:
83GB ext3 free space
~10GB ntfs HP/Vista Recovery Partition
~93GB Ubuntu (Hardy Heron)
I tried to just have two partitions (recovery and ubuntu), but because of the different file systems, and the placement of the hp recovery partition, it has to be right in the middle. This is basically what I want to do:
1) Reinstall Hardy Heron on a new (smaller) partition from the free space partition.
2) Once it's working properly, format the rest of the hard drive (getting rid of the recovery partition) and create a single ext3 partition.
3) Install another distro on this new partition.
Does anyone foresee any complications with all this slicing and dicing of my hard drive for which I should/could prepare?
View 9 Replies
View Related
Aug 18, 2011
i am following the installation process and its very unclear whether or not a dual boot will occur and how i can make a partition of the free space available from my windows partition etc....i dont want to go through the process and find myself losing all my data and my windows partition i also cant seem to select a partition less than 86% of the total capacity of hdd so im def sure they're not taking my dual boot desires into consideration.
View 1 Replies
View Related
Aug 5, 2011
I am completely new to Linux in general, and have recently downloaded Fedora 15 KDE spin. I tried dual-booting between Windows 7 and Fedora by shrinking one of my Windows partitions (I have two, this partition not containing the Windows installation). I tried shrinking it to 30 GB less than the total space available on the partition, and after pressing continue, received an error (which I unfortunately dismissed quickly and can't remember). In the file manager, Fedora showed that my partition changed from 1.3Tb to 1.2 Tb, but I couldn't access it. Upon rebooting into Windows, I still can't access it, receiving a "format drive before use" popup and then error stating that it is possibly of a different filesystem or corrupt.
Unfortunately, I stupidly didn't backup any of my data (which I will be sure to remember to do in the future). I installed EASEUS Partition Master 8.0.1 Home Edition, which states that my drive is still of NTFS filesystem and has the total space it should. However, upon clicking "check drive," it states there are no errors and when trying to "explore files," it doesn't find any (yet it shows the correct amount of used and unused space). I then tried running TestDisk, but only allows me to check my media drive E, which is my dvd drive that has my Fedora Live CD in it (which cannot be ejected manually or through Windows, an error stating it cannot be ejected). I didn't go through with TestDisk for my DVD drive because I needed to verify the type of partition (which to my knowledge shouldn't even exist). It shows 700 something MiB / 600 something MiB. Although I have decent general knowledge about computers, I am a complete novice when it comes to doing something like this.
View 1 Replies
View Related
Jul 25, 2010
I have 160gb laptop. i installed vista in c primary partition which is 25gb and installed ubuntu in d primary partition which is 20gb. A remainig for my data. Now i tried to install CENT OS by formatting ubuntu. I inserted CENT OS DVD and restarted and i selected to delete my /dev/sda2 which is showing 20480mb and it shown me free space. but i tried to add partion /boot of 100mb it got added. but, when i am trying to add / of 3000mb in the remaining 20380mb free space it showing an error message that no free space is available.
View 4 Replies
View Related
Dec 3, 2009
How can I shrink a LVM2 partition in fedora 12 in order for me to install another distro. thank you
View 1 Replies
View Related
Dec 5, 2009
I recently did a fresh install of FC12. When installing, I selected the option to completely format the HDD and use entire disk space. Apparently I was so excited everything worked perfect (upgraded from Fc10), until I started to copy videos and it said there isn't enough disk space.
So I downloaded gparted and here's what it shows..
/dev/sbd (698.64 GiB)
/dev/sdb1 - (File system) ext4 - (Mount point) /boot - (size) 200.00MiB - (used) 43.50MiB -(unused) 156.50MiB - (Flags) boot
/dev/sdb2 - (File system) lvm2 - (Mount point) none - (size) 698.44GiB - used and unsed are none - (Flags) lvm
[Code].....
View 5 Replies
View Related
Nov 7, 2010
Fedora 14, 64-bit. In installer i came to partitioning, chose option: User Free Space, on hdd i have a partiotion (unformatted) of 40 GB. Still, installer says:
Quote:
Could not find enough free space for automatic partitioning, please use another partitioning method. What should i do? PS. I don't want to create partitions manually, because I don't know how to do it and installer is going to do it way better itself. I can't use whole hdd either as i have windows and data on it which i cannot lose. PPS. I tried unformatted partition, unallocated space (of 40 GB), options: User Free Space, Create Custom Layout, but i always get an error msg about 'not enough space'. Is it possible, that installer is bugged?
View 8 Replies
View Related
Jan 11, 2010
I deleted Win7 from my dual boot but I cannot seem to merge the 160 gig's of free space into my ubuntu partition, ran the live gparted but it will not let me expand the ubuntu partition!
View 4 Replies
View Related
