I wanted to create my own folder called /Softwares so that whenever i download a rpm i could place it there , run createrepo and then use yum install software_name.What am i doing wrong am i doing something wrong in the .repo file? The only way i could actually install sskype.rpm is to go in the directory where it was installed and type yum install sskype.But then whats the point of the repository.
View 1 RepliesI updated my step-by-step guide for the creation of a custom Fedora 15 Live image. You can view it here. The previous post for Fedora 14 is here.
View 4 Replies View RelatedI want to connect my OpenSuse 11.3 Distribution with the Internet via WLAN. But i can't open the KNetworkManager. It doesnt respond to my clicks. If I click on the KNetworkManager "Button" it doesen't react.
Result : I can't modify my WLAN-Connection.
I am installing in Kubuntu (I cant stand ubuntu anymore) But when i try to use dd to install to a USB, I cant because Ubuntu got rid of the root and when i sudo it, It doesnt seem to work!
Here is the message i get:
I have coriander-2.0.0-1.fc14.i686 installed and it does n t work anymore as it used to with my IIDC compliant ieee1394 camera.
I understood that raw1394 and video1394 modules are now deprecated. So firewire_ohci and firewire_core are loaded when I plug in the camera. There is no more /dev/raw1394 and /dev/video-0 streams, but now there are /dev/fw0 and /dev/fw1.
When I run Coriander, I receive: Erreur de segmentation (core dumped)
If I create the following link: ln -s /dev/fw1 /dev/raw1394
[Code]....
I want to run a web server.
I've done
When i do [url] i get a blank page.
trying to use ipmitool during startup to detect certain hardware and run some configuration. This worked fine for me on RHEL 5.4 but only after smartd had started. For some reason I cant get it to work any time before I get a login prompt on RHEL 4.5
View 2 Replies View RelatedI am fairly new to Fedora or rather use it only for some school exercises I get. I have to setup a Samba server with some basic settings and it doesn't want to work. I first tried it on the Fedora VM I got from school (version 11). It somehow worked, but extremely bad ... the Windows client had to wait for over a minute to get either access or an errormessage, that the server was not found (but when entered the ip in the adressfield on top it worked (with a minute or more to wait)). I tried updating the VM - no improvement. So I decided to download Fedora 12, installed it and the Windows client gains instant access on first glance. But when I try to get access to a specific share, it only tells me, that I am not allowed to access it Oo.
Here is my config:
Code:
I even turned off iptables and Windows firewall.
The funny thing is: I tried exactly the same config on my homeserver (copy and paste), which runs Arch, and it works with no problem. But on Fedora I cant access it from nowhere. Not from WinXP, Win7 or any Linux. Simply won't work.
I dont have any gui on Fedora
generally whenever there is a wifi connection available fedora will detect and i can establish the connection but today i am not able to see any such wireless network available. I am in a wifi accessible area and i need to know how this can be rectified. i tried iwlist scan in the terminal but that doesnt seem to work
View 1 Replies View Relatedjust installed ubuntu on a dell inspiron 6400 but the wireless doesnt work.
However, it works 100% when running from the live cd.
Can i install/copy the driver from livecd to hard drive, or is there another soultion for this?
Today I decided to try to install 2.6.31.1 on Fedora 11, x86_64.I did it differently from what appears to be the RPM way, I instead just compiled it from the source.Anywho, ndiswrapper with NetworkManager doesn't work in the new kernel
View 12 Replies View RelatedI use .htaccess to deny all ip addresses except certain to an internal wiki on a subdomain.
Code:
If access is denied to the homepage users are shown the Fedora test page instead of my own custom 403 error page. When I go to a page - not home - I see a standard 403 error page.
Code:
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.0.54 (Fedora) Server at wiki.domain.com Port 80. What am I missing here? Seems like my ErrorDocument is not being reached..
I've been running 10.04 since September on my new MSi i3 notebook and about two weeks ago I noticed that when I login after system boot, propagation of icons on my desktop and the content of my Panel have become slower and slower.If I logout and login again the propagations are not slow.
View 1 Replies View Relatedi installed F13 at work in VirtualBox to test Fedora features in order to have a web server under Linux. while playing aroung i run the yum command : yum info kernel and i got the following message:
Quote:
Loaded plugins: presto, refresh-packagekit
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again
i've search on internet and after googling a lot, i tried several solution like:
- uncomment all baseurl and commenting mirrorlist
- disable networkManager
- add http_proxy in yum.conf
however, nothing works internet works well the proof is that i'm writting this thread thanks to F13 :-)
I am using 8.04 Sometimes, when I start some video or audio file, I cant hear the sound. Even if it is working some time back. Then it starts all of a sudden or mostly I need to do a restart.
View 2 Replies View Relatedwhen i go to ccsm and activate any setting it doesnt seem to take affect....
View 1 Replies View Relatedi've come to replacement my 80 yr old fathers win98 machine with lucidFirefox 3.6.3 says 'connecting to .....' when accessing a webpage (eg his home igoogle page,bbc.co.uk ) and then times out .It all works with opera and links2 and pings are the usual times and its doing DNS . I've added 4.4.4.4 and 8.8.8.8 to /etc/resolv.conf for good measure FF its configured NOT to use a proxy ( Im fed up looking and checking !) and ive tried the 'detect settings automatically'this is a 'mission critical' step. Going to linux is a big enough change , so getting FF working will be a deal-breaker
View 3 Replies View Relatedi'm havng issues
Code:
bahie@bahie-laptop:~$ sudo apt-get install screenlets python-rsvg
[sudo] password for bahie:
Reading package lists... Done
Building dependency tree
Reading state information... Done
python-rsvg is already the newest version.
[Code]...
Just spent three whole days barking up the wrong tree, solving Fedora 11 and Fedora 12 boot failures because the correct hypothesis was illogical: installation did not update/modify the initrd.
The first couple of times I installed Fedora 11 on the HighPoint Technologies RocketRaid 2640x4, the installation inserted my "custom" driver module (rr26xx) into the initrd, permanently, so that the system booted off the controller card for which the custom driver was inserted. (I yelled about this success in this thread: [url]
My most recent installs of BOTH F11 and F12 on the RocketRaid failed to properly set up the boot. It turns out that the "rr2640" module I "slipstreamed" into the installation process was *NOT* permanently added to the initrd by anaconda. (F12 gave me "no root device found boot has failed, sleeping forever", on boot; F11 hung also, without such error, I presume, during the init script execution). Because of limited resources and time, I only know for sure the module was missing from the F11 initrd, and am ASSUMING the same was the case with F12.
The only difference between the successful installs and the ones with failed boot is that the successful installs were made on a single-drive (JBOD) mode on the controller; whereas, the failed ones were placed on RAID 5. But, AFAIK, the created logical device for the card is "/dev/sda", in both cases, and the kernel can not distinguish between the two cases (or can it?). Thus, the inconsistency cost me a lot of time, and is still inexplicable to me.
Question: What is the best way to deal with custom drivers, today? There are custom spins, and many tools, like isomaster. Stupid question: Is there a way to modify the initrd inside an installer ISO -- be it for CD/DVD/USBboot drive -- beefing the init RAM disk with whatever modules you'd like, for the boot process (using, say, isomaster)?
And what makes anaconda understand that a module must be added to the initrd ? How can one force anaconda to do so?
How does moving to dracut as the initrd tool affect any/all of the above?
I have lenovo thinkpad 500sl . with 11.1 my bluetooth was working, now its not turning on , i cant see it also in harware manager.
View 3 Replies View RelatedIt tells me (as in speaks to me) to go looking in the logs but they are all blank.
View 4 Replies View Relatedright now im using the nm-applet but i dont like it. it produces lags. i think the periodical ssid/broadcast check might be the cause :/it lags every minute or so...in games and skype it is very annoying! if there is a possibily to disable these scans in nm-applet it would be fine too.for the moment im "using" this wpa_supplicant config:
Code:
ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
[code]....
cd /Desktop/ ??
I can change to just about any dir of my file system with cd /filename/
eg cd /var/ or cd /opt/
it will skip me up or down the tree to get there but when if go cd /Desktop/or cd /myuseraccount/
is get: bash: cd: /Desktop/: No such file or directory
i have to be right next to the directory to get there.i dont get it. why is this?
I have a computer that i wish to install ubuntu 10.04 on, it wont install tho, it tells me that it cant detect the cd rom (the drive it is booting from) and that i should insert a removable device with the drivers on it, except i dont have those and don't know where to get them. i cant boot from a usb but i have a usb with 10.04 on it just incase. i tryed this with both alternate install and desktop. i dont know what to do, i have invested 2 days to try and do this and i would really like to put this on my computer.
I have previously installed 8.04 on my computer with out such error and all of the hardware is the same (even the hard drive), and i lost the 8.04 disk. <(it was a live disk)
I am running xubuntu 11.04 (ISO from early this week). During install, I selected to NOT auto login but to present this gdm panel where I have to enter the password (or other users could log in).
Now I decided to enable auto-login (and to start the screensaver right afterwards) ... so I opened up the "login screen settings" (systems menu), unlocked that window and changed it to "login as xxx".
Then i rebooted and would have expected to be greeted with my screen saver on a logged-in session afterwards. But what happens is that there is a gdm panel sitting ... showing me
AUTOMATED login
Other
Where the first item wont do anything.
So I have to select other and enter user name + password ?
Is that how it is supposed to work?
my printer is not listed the type of drivers it mentions to download in plug and play.the drivers listed dont come close to the number(465cn).I have a brother mfc-465cnwhere do i find the drivers that will be compatible. generic diver listed didnt work or other numbers listed under the 'brother' or 'mfc' brandI went to the open printer website and my printer isnt listed there either. just brother and some other mfc's but nothing near what my printer is.
View 12 Replies View RelatedI would like to limit incomming connections in my firewall. My second server has a kernel:
The problem is when I`m trying to use "connlimit" in iptables.
I`m pretty sure that this rule is OK:
Code:
But for some reason when I`m trying to execute this I see this:
Code:
Maybe its not loaded ? I have no idea how to install connlimit for iptables...
I had some Problems with analog Modems.We have now new Server Hardware witch don't work with Suse 10.2, now we Upgrade to 11.2, but the Devolo Modem doesnt work with the Drivers vor 10.2, No Problem, this Modems are sold out, i had to search for other Modems.Now I Test an Softmodem with Motorola Chipset, Bad Luck.Then i Think, Try a Hardware Modem From US-Robotics, Expensive but working on Linux: USR802981-OEM But don't working on Suse 11.2.If you had some Other Modem (internal Pci) witch works for DialIn Data Connections please sent me Type and Configs
View 9 Replies View RelatedI'm trying to set up a PAN between two laptops to use as a transport for layer 3 communication..my problem is that it just doesnt work.
View 1 Replies View RelatedI found some code and tuts that tell me how to create a playlist, and I followed it to the letter but it doesnt work...I'm guessing it has somethin to do with my configuration settings with apache, otherwise here's the code:
Code:
So inside the m3u file the code is:
Code: