i finished installing CentOS 5 and managed to connect to the Internet. My Network Interface Card (NIC) is "Atheros L2 Fast Ethernet" and it is not in the device list. anybody can tells me what i should do now to be connected to the Internet?
View 8 Replies
how can i connect to the internet using modem card?
Intel d915,3GHz pinless,Lucent Modem
I have a USB Tata Docomo (USB Modem to connect internet) lsusb shows
Code:
Did a lot of Googling etc on forums and seems a few people have been able to use it.
1) [url]
2) [url]
Though I followed steps as per above links but I my connection via network manager does not establishes. Which as per above links should have come if things went correctly. In Windows same modem works correctly.
I also installed usb-modswitch but not sure as how to use it. I installed it via Synaptic (I use Ubuntu)
Quote:
Shows
Quote:
Quote:
My kernel is
Quote:
Quote:
Like this it keeps on repeating above steps. My service provider does not give a user name and password.
Here is my wvdial.conf file
Quote:
Next set of commands
Quote:
Quote:
Quote:
Quote:
Quote:
I also tried as per this post [url]
Quote:
How do I connect to internet?
Is the driver for my device missing on my system?
I've installed from the CD the Centos version 5.5. When I try to connect to Internet I can't because I received some errors. I've the Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller also a wireless slot (I've the wireless card DWL-G650+) When I turn on the pc and I go to "Ethernet Device", I see set: peth0 (Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) ETHERNET CONTROLLER) and also set "Bind to MAC address": fe:ff:ff:ff:ff:ff I've set manually the IP address (I'm under router). Status is "Active" but can't go on the Net. When I change to "eth0 (Intel EtherExpress/100 driver)...sometimes become "Active" an other times said that the MAC address is different or to check the cable because can't find the IP. What can I do?
View 5 Replies View RelatedI have a Dell Inspiron 1545 computer. I boot into Ubuntu with a flash drive. When I boot, I cannot connect to a wireless network. No available networks are displayed (and I know my router is on) and the Network Manager icon displays no bars. I suspect that the Dell Wireless card (having a Broadcom BCM-4312 chipset) needs a driver. I have tried to intstall both of the restricted drivers (BCM STA and 43xx drivers), but with no success. I have run lspci in Terminal, and got many lines of text. Here are the lines that look relevant to me:
Code: 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) In Windows 7, everything is just fine. In Ubuntu, my wired connection works like a charm, but is not really accessible. Basically, I have to connect to wireless in Ubuntu or I have no reason for having it.
I'm using ubuntu karmic and I'm not able to connect to the internet with my reliance netconnect data card using network manager. Other distros like fedora, opensuse n sabayon connected easily with nm. Ubuntu detects the data card flawlessly but just doesnt connect.This problem has been persistent even in previous ubuntu versions, n I used to use wvdial. But downloading wvdial on some other comp with every dependency is really cumbersome.
View 6 Replies View RelatedAny ideas why i cant connect to the internet with this server.
View 2 Replies View RelatedI have a desktop that has a d-link DWL-520 wireless card, which was working under Windoze. Today I installed Centos 5.4 on the system , which went cleanly. I then used Network Configuration to set up the wireless card. I specified to use DHCP, set the SSID and authentication password. When I tried to activate the card I get these error messages
Error for wireless request "Set Mode" (8B06): SET failed on device wlan0 ; Operation not supported. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0.
The hardware manager seems to have correctly identified the card and chipset, (Intersil Prism 2.5) and installed driver hostap_pci which came with the distro. This web site seems to suggest that this is the correct driver: [URL] searching forums I've found a few references to these errors, but they were from several years ago, and for different distros and cards. I did find a reference to using Network Manager to configure the card instead of Network Configuration. I started the NM service and configured a connection using it instead, but still no luck.
[Code]....
I am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
I'm using virtual network (NAT network) for my domU.When I change dom0's firewall setup, the domU will fail to connect to Internet anymore.So far, the only way to bring the network back is reboot dom0 !I try to restart service network and libvirtd on dom0 ... it doesn't work.How can I bring the domU network back without reboot dom0 ?
View 1 Replies View RelatedHeres the set up I have: one eeepc running ubuntu netbook. with a usb wifi dongle, this is connected to a parabolic antenna i made out of pizza boxes and tin foil. One fujitsu laptop running ubuntu 10.10. the eee connects to the internet via the dongle. then the laptop connects to the eee. I set this up by using network manager. I created a new wirless connection and called it "UbuntuAdhoc". The on-board card connected to this without issue and the laptop was able to connect to the new wireless broadcast by the eees on-board card.
This worked perfectly untill I rebooted the eee. Now the eee is unable to conect to the internet if the on-board caard is conected to "ubuntuadhoc". also the dongle now wants to conect to "ubuntuadhock" too.
i have created dialup internet connection in windows xp using my bluetooth enabled mobile and bluetooth device ,,and my question is that how to set up the same procedure in my fedora 11 system.
View 1 Replies View RelatedCurrently my setup is a road runner cable modem connected to a desktop via a ethernet cable. The networkmanager lists "Broadcom BCM440-BO 100BaseTX" device not managed. I've turned off the power to both the cable modem and the computer. I then turned on the power to the cable modem and then the computer. If I try the firefox browser, it can not connect to the internet.
View 3 Replies View RelatedI instaled vmware and created a virtual machine which is bt4. first of all i cant creat an user password and i log on with root second when i run the command airmon-ng i cant get my device name or anything caz nothing comes up under interface or i forgot what its caled.
View 3 Replies View Relatedi can't connect to the internet using my wireless card i see the network that I want to connect to but when I try connect it gives me message saying that i am disconnected.
View 2 Replies View RelatedI am currently trying to connect to internet through my wireless card, after half day's effort I reached to this point:
/******The following error appears in the dmesg kernel ring buffer output:
ipw2200: ipw2200-bss.fw load failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ipw2200: probe of 0000:02:03.0 failed with error -5*********/
I found a solution from Intel website saying that the problem might be: "firmware in wrong location or wrong firmware version". So I proceeded to download the firmware and placed it in /lib/firmware. Also I tried to use menuconfig to enable loading firmware via hot-plug, but I think I have done something wrong when I was configuring the hotplug and firmware.
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
Iam using suse linux desktop 10.0. when i connect tata photon USB modem for internet, the system recognises the USB device but unable to connect to internet. How to use tata photon in suse linux
View 3 Replies View RelatedI recently purchased a Micromax 3g GSM usb data card(MMX 352G). I am using it in windows 7 but now I want it to connect to the Opensuse 11.3 to use internet.
This modem is not detected by the command "wvdialconf"
the device is detected by command "lsusb" as 1c9e:9605
there are two computer
wireless internet accessible notebook.
desktop with no wireless card (but just normal lan card).
I connect two computer with lan cable, and I want to use internet in desktop computer through the notebook's wireless lan
what kind of setting do I have to do?
desktop's OS is Ubuntu, and notebook's one are Ubuntu, Windows XP.
On this box I have Two seperate Ubuntu installations. Recently in both I seem to be having the same problem. I initially can connect to the internet as per normal and use any internet application. But after a period of time, sometimes just minutes, sometimes hours, even though the icon says connected, I cant update pages or send emails etc because there is no actual connection. My Physical connection is good I know - My Ubuntu laptop and Windows gamming PC connect fine during this period. So
Does this suggest an intermittent hardware fault or is there some thing in Ubuntu I can check to make sure that it is setup correctly and nothing has been corrupted? I am a lay PC person - I dont really want to be command prompting - Plug & Play and Point & Click is my limit.
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies View RelatedIs it possible to list/find/compare the program versions on a Centos system, against Redhat/Centos Errata/Security/Bug lists? Sort of looking for a way to make sure that all the packages on a system are ok, and not a security risk-- Without having to update every package. A pseudo code, in my mind is:
[Code]...
I am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
[Code]....
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
View 9 Replies View RelatedI had put my computer on standby and when i restarted it, it powered off within a few seconds. I turned it back on and after that i've lost connectivity to internet on Ubuntu 10.04.
However I have VMware (XP) installed and internet/network works on that. I'm a newbie with Linux.
Here are some outputs:
I have tried to edit the connection using System>Preferences>Network Connections. I entered manual settings for IPV4, but whatever i enter there, it doesnt get reflected when i type ifconfig in the terminal window. I tried setting it to Automatic DHCP as well. Doesnt work.
I tried connecting my laptop configured with centos to a wired net connection but i was unable to do so.
when trying to connect i got this
Determining ip address for eth0.... failed
I use Ubuntu i can not work internet connection Please help me search for a solution but did not find
Use the USB modem model x060s.
I've recently set up a local development webserver using Karmic Koala. I downloaded and installed the server version of Kubuntu and have the web server working.
The problem is that for some reason, I'm no longer able to connect to the internet. I can connect to my router, and other machines in my network can VNC into the server.
I'm using an wired connection to the router and have the server set up on an internal IP of 192.168.0.100. I used to be able to connect to the internet, I downloaded and installed a load of packages etc before it stopped working.
The last thing I remember doing before it stopped working was that I installed Samba so I could share files with the other machines on the network (two Macs running Leopard and a WinXP laptop).
I got the share working - I copied a load of files to the server via the share, rebooted, and for some reason now I can't connect to the net (and other machines can't see the Samba share either.) However I can still VNC into the server.
how to install and setting (mail transfer agent) for sendmail..
View 2 Replies View Related
