a project using bluetooth to send data byte by byte to external devices buti'm not familiar using arrays to read file from another location before sending the data.If you could,do correct my codes.Here's my code,
void loop(){
char Msg[]={"Hello"};
char *start;
[code]...
For example, I have a text file with data which lists numerical values from two separate individuals
Code:
Person A
100
[code]...
How can read the file /var/etc/allInOne.cfg and distribute its contents on multiple cfg files using C language. /var/etc/allInOne.cfg contain the data and the path of each text file.
The source file "/var/etc/allInOne.cfg "look like this:
line1
line2
...
line10
filePath:/var/etc/file1.cfg
line12
line13
...
line14
filePath:/var/etc/file2.cfg
linen
..
filePath:/var/etc/filen.cfg
the result will be :
The expected result is:
/var/etc/file1.cfg will contain line1 to line10
/var/etc/file2.cfg will contain line 12 to line13
/var/etc/filen.cfg will contain linen to linen-1
For example, I have a text file with data which lists numerical values from two separate individuals
Code:
Person A
100
200
300
400
500
600
700
800
900
1000
1100
1200
Person B
1200
1100
1000
900
800
700
600
500
400
300
200
100
How would I go about reading the values for each Person, then being able to perform mathematical equations for each Person (finding the sum for example)?
i am trying to write a program which will read input from a text file, check if each line contains any alphabets and then display a message imforming me if there is an alphabet in each line. My text file is formatted in this way...
[Code]....
I have a text file that looks sort of like this:
Code:
blah blah blah
tons of unimportant stuff we don't care about
[code]...
I have two txt files containing x and y coordinates: xcoord.txt & ycoord.txt. I need to open them; read them line by line to get each coordinate; then each time I need to update Xs and Ys parameters inside another file called "dc.in" with the grabbed values.
Finally each time I need to run two exe files ( dc_2002 and st_vac) and produce corresponding output for each Xs and Ys ( dc.in is an input file for this exe files)
I have written the following code but it does not work:
bash 3.1.17(2) I'm trying do write a shell script which must operate on each line of an ASCII text file. So, all the code must be inside a loop, and inside the loop, the first thing should be to read the next line from the file. I have the bash read command. But it reads from stdin. Any way to make read from a file?
View 6 Replies View RelatedI have a problem with arrays in awk. What i want is to take some data from a file (ssh log) and print it to a html table. I have managed to print some stuff (user logged in and how many times they have logged in) What i want more is to take all the ip that each user logged in from and print it in a row next to the username and times (in the code i typed blabbla where i want the ip to be shown. How do you think i should approch that, multidimensional arrys maybe?
Code:
I have a text file called file1.txt containing many lines eg.
line1
line2
line3
line4
line5
line6
Then i have another text file called file2.txt contains
3
5
6
Is there a command to remove the lines in file1.txt based on the keywords in file2.txt? note: It should remove line3,line5,line6 based on 3,5,6
Columns are separated by SPACE. Column 5th is in quotation marks. How can I ask AWK to read everything between quotation marks ?
View 4 Replies View Relatedim making a program (for the heck of it) that rewrites it code everytime it is run.(my ambition is to turn it into my c++ teacher and watch her be confuzled as to why she cant read my code and why it does weird things) Ive just started c++ programming, and managed to rewrite a program so that when it is run a second time, it says hello world. My problem is that I can only input the file as a single string. What I need to do is to be able to input the entire file into the c++ program, as a single object and then ifstream it out with the destination as the source code.
Also, it would help alot if there was someway to write additional lines to an existing text file instead of overwriting what is already there. That way, every time my c++ runs and rebuilds itself, it adds another couple of lines of code to a txt file and when the final iteration is complete, it loads a text file that was created by the program and uses it to program itself. I heard there is some sort of spawn command, can it be used to open up notepad and write to it? it would be awsome if my various programs could open different notepads with various messages
I need to insert 3-4 lines of text to the beginning of a text file. The file is a largish MYSQL dump, the result of a backup shell script. This shell script should insert the required text.I've wrestled with sed, but lost.
View 2 Replies View RelatedI have to delete a certain line of text from the a textfile via ubuntu's shell scripting.I have done research, and it seems that most people advocate the usage of sed /d option. sed makes does not edit the text file. Hence, most options I discovered involved the use of a temporary variable/textfile and then overwriting the old file with the temporary new file. Is there anyway whereby I can bypass the use of temporary storage containers? I hope there is any magical combination of commands to edit the file directly.
View 3 Replies View RelatedI want to display something in my text view widget in glade using c code. that's all right.
now I need to attach a save button beneath the text view.so that on click the text view content should save as a txt file..
I want to display the contents of a particular log file (simple text file, I mean in Linux). But there is a problem: The contents need to be organized in a fixed format. Have a look at this log file:
sampleLog.txt
Code:
User Name: XYZ
Reported Problems Description: Blah! Blah! Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah!
[code]....
So, while displaying the contents of above file on a web page, I want to format the field names found in the log file: User Name:, Reported Problems Description:, and Remarks:. These fields may contain a variable length of text and no specific line number is assumed for them to appear on.
The desired output should look like this:
User Name: XYZ
Reported Problems Description: Blah! Blah! Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah! Blah!Blah!
[code]....
Well, what I am trying to do may sound wierd to some of you. The filed "Reported Problems Description:" can possible contain text which embeds colon (.
a sed command to add a text before line number in text file? I have text file with 500 lines, and i want to add 3 more lines with text after line 300, OR before line 302, isn't no problem.
View 16 Replies View RelatedI've got a command in a shell script:
Code:
php ./script.php > output.txt & echo $! > script.pid
This results in my script launching as a background process with output routed to
[code]...
how can I set the cat command to read specified lines of a text file,like if I have a text file with 100 lines, who can I say cat only line 23 to 42?
View 3 Replies View RelatedAKA "zipping on the fly .. the slow-as-molasses way." The list includes full pathnames to each file, and they're all in subfolders of the same parent folder (which, unfortunately, is not the root folder of the drive or system on which the files reside). A cleaned-up and radio-ready portion of the list looks like
Quote:
.../taiga/ahqr-va-choyvp/bv0884-073.jpg
.../taiga/ahqr-va-choyvp/bv2635-073.jpg
.../taiga/ahqr-va-choyvp/bv3067-175.jpg
[code]....
What I'd like to be able to do is zip all the files in the list into a single archive, to avoid the step of having to copy them to the same location (presumably another folder on the HD) and then zip that folder. I'm more inclined to make provisions about extracting to a single folder at some other time. Is this possible in BASH, or would I have to consider a faster, more robust scripting language such as python or perl?
PI'm trying to write a script to list all open ports in the MINIUNPND chain in iptables and use the procotol, port and destination ip to open ports on another router using upnpc.Here is the output of iptables -L MINIUPNPD
Code:
>iptables -L MINIUPNPD
Chain MINIUPNPD (1 references)
target prot opt source destination
ACCEPT tcp -- anywhere 192.168.3.124 tcp dpt:19955
ACCEPT tcp -- anywhere 192.168.3.124 tcp dpt:20054
ACCEPT tcp -- anywhere 192.168.3.130 udp dpt:10654
ACCEPT tcp -- anywhere 192.168.3.121 tcp dpt:29955
code....
No matter what i do i cant seem to remove the first 4 characters from the MYPROT array to leave only the digits. Also i cant seem to read the array back???
I thought it would simply be a loop reading each line and passing the fields in variables, executing upnpc commands i need then moving to the next line of the file until it reached the EOF.
I'm having a slight dilemma on reading data from a text file and outputting it into a table then displaying it. Basically I'm writing a shell script that takes information from text files then outputs the data into a table with 4 headings.he extracting of the data is fine, but creating a table i'm having problems with. I think it is possible to do it using the awk function, but so far i'm having a lot of difficulties.
View 14 Replies View Relatedi need to write a c code to ping IP addresses which are read from a text file and need to log the response time in another text file.
View 4 Replies View RelatedI have a script almost working except for 1 thing. What I'm trying to do is read a file that has the files that need to be FTP'd using a bash script. I have everything working except the reading of the file. It works outside of the ftp script I've wrote but once I put it in the FTP script it doesn't.
Here's the Script:
#Here's where the problem is that I know of
I've been playing w/ the exclamation points to see if that could be the problem, but so far no luck.
I have a text file that contains a single word and I want to write a bash script that will read the word from the text file... The following is my incorrect attempt, as it assigns the name of the textfile to the variable as opposed to the word stored within the textfile:(assume I have a text file value.txt that has its contents a single word, say wordone)
Code:
#!/bin/sh
for f in value.txt
do
echo $f
done
so the output of the above script is value.txt, however I want it to be wordone.to summarise: how do I assign the value of the word contained within a textfile to a variable?
I wonder why arrays in the C programming language are pointers to the first element of the array, not the first element of the array itself?
View 14 Replies View RelatedI am splitting a file based on the values read from an input file. The below one is the script.
1)How do I add the header which is present in the original file to the new split files created?(For eg. pharmacyf conatins header as table column names. The new files created (ODS.POS.$pharmacyid.$tablename.$CURRENT_DATE.dat) are without the header).
2) Also the script is creating 0 byte files for the pharmacyids which are not available in the intial file? Can this be avoided?
for pharmacyf in *
do
tablename=`echo $pharmacyf |cut -f4 -d'.' `
while read pharmacyid
do
grep -w $pharmacyid $pharmacyf >> $OUT/ODS.POS.$pharmacyid.$tablename.$CURRENT_DATE.dat
done< inputfile
done
I have a .txt-file with ~50.000 lines of numbers, generated by a mathematics program. From this file, I need line ~ 1.100 to line ~16.000 (these lines are always the same btw, this may make the solution easier, dunno) to be copy/pasted to another file, where the lines ~500 to ~15.000 (also, every time the same) should be overwritten by the aforementioned lines...I haven't found or come up with anything that works yet, mostly I find solutions to copy everything from one file to another but I can't find something to specifically overwrite a part of a file with part of another.
View 4 Replies View RelatedAlright, so I have been trying to resolve this issue for awhile, but now feel like help is very necessary.I have a 128(by)128(by)128 array in a MAT file, and am using the following MATLAB script to convert it to a DAT file:
load C_42.mat
fid=fopen('C_42.dat','wt')
fwrite(fid,Nu)
[code]...
What I plan to do is, create a duplicate file of a text file, and then append some text into the new text file.
View 1 Replies View Related
