bash 3.1.17(2) I'm trying do write a shell script which must operate on each line of an ASCII text file. So, all the code must be inside a loop, and inside the loop, the first thing should be to read the next line from the file. I have the bash read command. But it reads from stdin. Any way to make read from a file?
This script that I found online does the job it promises. it does convert the files to mp3 without an issue. What I need to include now is an if statement that says If $file.mp3 exists then delete $file.wav
Code: #!/bin/sh # name of this script: wav2mp3.sh # wav to mp3 # Credit to the script creator (Nikesh Jauhari):
[Code]...
After that I'm stumped as to how to do the if statement
I need to to write a bash script using an If...Then...Else statement that will accept a day of the week from the command line what do I do or where do I go.
We are building our C++ project in Kdevelop IDE. Every time we run "Run Configure" from the "Build" menu, a file named "libtool" gets automatically generated. This file contains a statement as "ECHO="echo"".f we run "Automake", without modifying the "libtool" the system hangs and theputer needs to be restarted.Therefore every time we run "Run Configure" we need to include the line "echo="echo"" below the statement "ECHO="echo"" manually.I think a script can be written which does the above on its own.I am not a shell script programmer, I know the good tutorials for shell scripts are available on the net, but learning scripting only for this task would be time-consuming and painful.
trying to learn how to write a bash script that will create a new text file named jimbola in my home directory. The file will need to be able to have the first and last name of Jim Bola included in it.
I want to write a bash script to parse a text file with the following lines and set variables for each line so that I can use them in the rest of the script.
Timestamp=123456789 Company=ABC Company Server=Server Recipient=Joe Smith Email=joe@abc.com
simplest way to read each line one at a time for everything before the =, set that to a variable name with the value equal to everything after the =
I have a text file that contains a single word and I want to write a bash script that will read the word from the text file... The following is my incorrect attempt, as it assigns the name of the textfile to the variable as opposed to the word stored within the textfile:(assume I have a text file value.txt that has its contents a single word, say wordone)
Code: #!/bin/sh for f in value.txt do echo $f done
so the output of the above script is value.txt, however I want it to be wordone.to summarise: how do I assign the value of the word contained within a textfile to a variable?
I have to delete a certain line of text from the a textfile via ubuntu's shell scripting.I have done research, and it seems that most people advocate the usage of sed /d option. sed makes does not edit the text file. Hence, most options I discovered involved the use of a temporary variable/textfile and then overwriting the old file with the temporary new file. Is there anyway whereby I can bypass the use of temporary storage containers? I hope there is any magical combination of commands to edit the file directly.
I have two txt files containing x and y coordinates: xcoord.txt & ycoord.txt. I need to open them; read them line by line to get each coordinate; then each time I need to update Xs and Ys parameters inside another file called "dc.in" with the grabbed values.
Finally each time I need to run two exe files ( dc_2002 and st_vac) and produce corresponding output for each Xs and Ys ( dc.in is an input file for this exe files)
I have written the following code but it does not work:
Was wondering if any perl guru's could help me with a quick log file adjustment. I have a text file that looks like so (tabs and newlines are revealed so you can see what separates the data):
There are maybe 100 lines of text in this file at any given time. I need to delete all duplicate lines only looking at the first bit of text prior to the first tab. It doesn't matter which one gets deleted as long as there are no two lines that begin with that same text at the beginning before the first tab. So in this example, either the fist line "1234" or the last line "1234" would need to be deleted. I already have code in my script that opens the files - I just need the code to read the text into an array and the part that would find matches based on the above criteria, and make the deletions.
If it would be easier, I can even do a system call and use SED (v4.1.5) and/or AWK (3.1.5) instead.
a sed command to add a text before line number in text file? I have text file with 500 lines, and i want to add 3 more lines with text after line 300, OR before line 302, isn't no problem.
I am trying to write a script that takes an input file ($FileName) and an intermediate file ($FileName.info) and removes lines from $FileName if the value in $2 of $FileName.info is <75.
I can't figure out how to feed only one line of the .info file to the if statement at a time so that it will perceive it as an integer instead of a list.
The error I am getting now is ./script.sh: line 6: [: : integer expression expected
When you use an if statement directly in bash you have to put the ";" at the end or not? or am I mixing it with the for loop? I am reading advance bash scripting and it shows the if - then statements without ";" so I need a little clarification here.
i am trying to write a program which will read input from a text file, check if each line contains any alphabets and then display a message imforming me if there is an alphabet in each line. My text file is formatted in this way...
the following works and BASH doesn't complain, but VIM highlights the closing square bracket is if it sees a syntax error. Is there a better way to express regex in a case statement or is this an issue with VIM?
The script that Iam trying to write is running a for loop and reading line by line from a text file. inside this for loop i would like to execute update SQL statement .
a pesudo code is Quote: `$ISQL -U $username -P $Password -D $Dbname -I $INTERFACE <<QRY for id in $idlist #idlist iam reading from a file
I need to Read a path of a file witch is written in Text file i used this
Code:
FILENAME=$1 while read line do echo $line done < $FILENAME
it worked and showed me the Line witch was written in my file but now my problem is how am gonna use that line as a path i mean for example if am gonna execute a linux command on that file like dpkg -i /path/to/the/file how am gonna export it from The $Line variable and use it after the command.
Say I have a text file like: Code: 1 3 4 How would I use ksh to put the number '2' into the second line of that file?Okay it's not bash, it's ksh because this computer is OpenBSD
I have a text file called namelist.wps. In this file there is a line that reads:
Code: start_date = '2010-12-26_12:00:00', '2010-12-26_12:00:00', I have to automatically update the year, month, and day of month for this line without changing the rest of the file. Here is the script that I have:
I have a bash script that checks for contents in a folder every 15 seconds and then acts on it's contents. This works great for the average size file however on very large files it starts acting on the file before it's completely written. Is there a facility in bash shell to get a file complete signal or such? here is trigger to launch a larger script.
Code:
#!/bin/sh while true do $HOME/bin/hpgl.sh >/dev/null 2>&1 &
I have a folder of 2 many files that the old ls just hangs.
I am trying to write some log files such as;
I don't mind doing one at a time, but I am just playing and even getting the listing I am not getting the date stamp, I have the following;
That does create the file, but all the files look like this;
So basically it's just sticking that ls inside the log file and not actually running the ls, so how can I use the above type to get files just created per year?
Something very handy to do in a Linux shell, is manipulating files and strings - essentially parsing data. Write a utility which will scan in a text file and search and replace strings. We also want to keep track of how many strings we've replaced.
I know that my command would look like this: <utility name> <filename> <stringToSearchFor> <stringToReplaceWith> Code: #!/bin/bash
trying read serial COM port and want to write that received data to file, now its writing only one sentence, but i want to write full file which coming on serial port, as i'm sending file from hyper terminal and reading on linux pc, If i put while loop its not writing anything,without while loop its writing only one line and if send big file then application terminates and then writes to file.But i need do write any size which coming on serial port.Finally i want write full file which is coming on hyper terminal, after writing the file it has wait for next data. This is my code,
I have a text file which stores the list of files & dir, I want to get only file's extensions from this file & want to store it in another file.eg, below is the file's contents & from it I want to get the extensions sh, pl & h & want to store it in another file. Also I don't want directory list.
A scripts/services_restarter.sh A scripts/svn post_commit scripts A scripts/tmp/
I have a text file called namelist.wps. In this file there is a line that reads:Code: start_date = '2010-12-26_12:00:00', '2010-12-26_12:00:00', I have to automatically update the year, month, and day of month. I set values for the year, month, and day of month using the following code in a c-shell script:Code: set y1 = `date +%Y`set m1 = `date +%m`set d1 = `date +%d` After I do this, how do I update year, month, and day of month, without changing any of the other lines in the namelist.wps file?