Programming :: Bash: Feeding Input To A Script From A Text File?
Nov 17, 2010
I have a script which checks on my jobs that run on some cluster.The script, "script.sh", takes as an input the job-id for the job to be checked. Sometimes I have 100s of jobs and I want to check them all (for successful completion.) I could put these job-ids into a text file, "job-id.txt", each id in its own line.For each job-id, the script would ask me few questions (with a yes or no answers) to see if I want to do some other checks for each job-id.I want to know how may I direct my job-ids from this text file into the script one job-id at a time.
View 14 Replies
ADVERTISEMENT
Aug 30, 2010
If I have an interactive program, e.g top, which, after launch, can be fed with key strokes and changes its behavior, for example, after launching top and then pressing "1", you can see the CPU utilization per core. I was wondering if there is a programmatical way to do so, so I don't have to press "1" every time. I would think it is an easy task, but so far my attempts have failed.
View 4 Replies
View Related
Apr 7, 2010
i am trying to write a program which will read input from a text file, check if each line contains any alphabets and then display a message imforming me if there is an alphabet in each line. My text file is formatted in this way...
[Code]....
View 2 Replies
View Related
Jan 20, 2009
I have this little shell script which copies file names taken from inputfile:
Code:
while read line; do
cp -i $line something
[code]...
View 4 Replies
View Related
Jan 12, 2010
in bash scripting...say I want to take the input from a user via a question...I would do this:
Quote:
#!/bin/bash
echo "How large do you want this partition to be in GB (enter only the number)?" read PART_SIZE echo "You want your partition to be $PART_SIZE GB" But I don't want to echo it back to the screen, I want to add it to the content of /etc/fstab. I have been mucking around with sed to find the tmpfs partition in /etc/fstab and add the partition size attribute (this is to use the onboard RAM as a volatile partition)...but am not having any luck...
The portion of /etc/fstab that uses /dev/shm for the tmpfs partition is:
tmpfs /dev/shm tmpfs defaults 0 0
So, if a user says "24" GB to the answer (from above), how do I get it to automatically add that value to the tmpfs partition line in /etc/fstab? So it would look like:
tmpfs /dev/shm tmpfs size=24g,defaults 0 0
I understand that I would also have to come up with a way to put "size=XXg", which I could do with a copied over generic file before this action...then the script would have to find "XX" and replace it with the user's figure...
View 7 Replies
View Related
Nov 8, 2010
I need to Read a path of a file witch is written in Text file i used this
Code:
FILENAME=$1
while read line
do
echo $line
done < $FILENAME
it worked and showed me the Line witch was written in my file but now my problem is how am gonna use that line as a path i mean for example if am gonna execute a linux command on that file like dpkg -i /path/to/the/file how am gonna export it from The $Line variable and use it after the command.
View 14 Replies
View Related
Sep 18, 2010
I have a file (called twitterstatus.tmp) that looks like this:
Code:
<status>
<id>24854489768</id>
<text>Are we gonna ride the sun home?</text>
<id>55266987</id>
[code].....
How could I feed this into an array, with each element containing everything between the <status> </status> tags?
View 9 Replies
View Related
Apr 30, 2010
I have a text file which stores the list of files & dir, I want to get only file's extensions from this file & want to store it in another file.eg, below is the file's contents & from it I want to get the extensions sh, pl & h & want to store it in another file. Also I don't want directory list.
A scripts/services_restarter.sh
A scripts/svn post_commit scripts
A scripts/tmp/
[code]...
View 8 Replies
View Related
Feb 15, 2011
At the moment I got my md5sum checking working which I write to a text file and see below.
If the md5sum works it will write the output to check2.md5 test.txt: OK
If the md5sum fails it will write test.txt: FAILED
How do I write if statement to check the output whether or not the md5sum failed or not ?
check1="/home/ops/Desktop/test1/check1.md5"
check2="/home/ops/Desktop/test1/check2.md5"
cd /home/ops/Desktop/test1
md5sum test.txt > $check1
[Code]....
View 2 Replies
View Related
Apr 17, 2011
write such script (bash script). I have some text file with name filename.txt I must check if this file contains string "test-string-first", I must cut from this file string which follows string "keyword-string:" and till first white-space and save it to some variable.
For example. File: PHP Code: PHP Code:
Start 15022011 Eng 12-3-42
SN1232324422 11 test-string-first
SN322211 securities
HH keyword-string:123456321-net mark (11-22)
[Code].....
View 1 Replies
View Related
Mar 11, 2011
For example, I have a text file with data which lists numerical values from two separate individuals
Code:
Person A
100
200
300
400
500
600
700
800
900
1000
1100
1200
Person B
1200
1100
1000
900
800
700
600
500
400
300
200
100
How would I go about reading the values for each Person, then being able to perform mathematical equations for each Person (finding the sum for example)?
View 13 Replies
View Related
Aug 11, 2009
Is there a way to process individual characters one-by-one from a text file in Bash, or is that hoping for a little too much from this lovable old clunker?
View 13 Replies
View Related
Jul 13, 2010
I am trying to think of a logic where my file contains some data I had to read and do some processing. Issue is that file contains data multiple times. For example:
:::::::::::
var1=value1
var2=value2
[code].....
I have to read first paragraph of variables and do some processing and then move on until the end of file. Variable names are same in whole file but for each paragraph the value is different. I can't think of a logic to attain this task. How can I do it? It should be a simple bash script, but I am not able to work out.
View 2 Replies
View Related
Dec 18, 2010
I am looking for a prgramme that output the lyrics when I give it an mp3...
Code:
fetchlyrics mymp3.mp3
based on its data inside of mp3
View 7 Replies
View Related
May 2, 2010
i am on processing text tasks And i found that if you assign a text to a variable is chomp'ed automatically the newline
Code:
variable=$(cat file.txt)
The problem is i can only access the items/lines using:
Code:
for line in $variable
do
echo $line
# Other commands
done
how do i convert this to an indexed array. More importantly, how do i get access to individual $line[0], ..., $line[n] Another thing, if the file.txt, has lines with spaces it is a mess using the for...in..., but echoing prints line by line...o_0
View 11 Replies
View Related
Jul 7, 2011
bash 3.1.17(2) I'm trying do write a shell script which must operate on each line of an ASCII text file. So, all the code must be inside a loop, and inside the loop, the first thing should be to read the next line from the file. I have the bash read command. But it reads from stdin. Any way to make read from a file?
View 6 Replies
View Related
Apr 28, 2010
I've written a bash script that allows a user to input a directory location to find out the size of the directory. However, if the user inputs a directory and finds its size then inputs another directory then wants to quit, the script asks the user numerous times if he wants to quit!! The script won't exit until the number of times the user looks at a directory is reached! What gives?
Here's the script:
Code:
View 4 Replies
View Related
May 7, 2010
As I'm starting to learn bash scripting I'm trying to automatize some tasks I usually perform. I have a notification mail I need to send several times a day. It has this structure:
Quote:
Dear user,
blah blah blah blah
You need to contact the following people:
[code]...
To replace "user", I found this:
Code:
read -p "Please enter username: " username
echo "Dear $username,"
Which probe to be very useful with other simple notifications like this. But I don't know how to manage the email addresses as they are usually more than one and could vary from 1 to 10. They should appear one above the other. I found this: "Here is a little work around. The only thing the user needs to do is hit enter without anything else on a line and it will close out"
Code:
#!/usr/bin/ksh
word=a
until [[ $word = "" ]];do
[code]....
I tried to use it and modify for my needs but I failed, I don't realize yet how can I use it. If possible, I would like to use the until loop like the above example just for learning purposes but any other form will be accepted as well.
View 10 Replies
View Related
Jun 2, 2009
I've been using python/bash to help myself automate things for a long time, however I am curious. One reason I use python more is because I don't quite know how to work with user input in Bash, such as getting it to ask for input and wait, and then placing that user input into a command.
Here's an example of a script I use from time to time for converting OGG video files into AVI.
How could I write this same script in Bash? Keep in mind I am mostly self taught, so I am by no means an expert programmer.
Code:
View 3 Replies
View Related
Nov 12, 2009
I am not sure if that Subject really explains it, basically I have a script that executes a CLI java-applet that requires a passphrase from the user. I can easily execute this by issuing the -p argument followed by the passphrase however that shows up on possible logs or at least on the results of the ' ps ' command. If you do not supply this -p argument it provides a new line with the echo " Enter Passphrase: " and asks for input.
how can I provide a result/input for the Passphrase request and is it still possible to throw this application in the background with the ' & ' following the command? I have seen a few examples that show a /bin/expect that expects a result and sends a command however I would like to refrain from any extra dependencies. Example of Regular Execution of application:
Code:
$ /usr/local/***/**** -u USERNAME -r Default-Realm -f certificate.der
Password:
View 6 Replies
View Related
Aug 9, 2009
I have a script im having some problems with, what I need is to have the system generate a random password for me and use that password when creating new users to it.
System is Debian Lenny and script is in bash.
The program is znc. I have made it so that it will generate the random password on the shell but the problem is to use it in the bnc software.
To make a password there the command is znc --makepass and look like this:
My question is now if it would be possible to put in the script so it would "answer" when it need those passwords ? the random password that is generated is in a variable called $setpass and is NOT crypted.
Or is there any other software that would be able to generate that md5 string for me ?
View 7 Replies
View Related
Jan 28, 2009
I have a text file called file1.txt containing many lines eg.
line1
line2
line3
line4
line5
line6
Then i have another text file called file2.txt contains
3
5
6
Is there a command to remove the lines in file1.txt based on the keywords in file2.txt? note: It should remove line3,line5,line6 based on 3,5,6
View 10 Replies
View Related
Oct 30, 2010
How do you catch user input while the script is running? Or, how would you make two scripts run at the same time, but use input from one script to the other? The program I'm trying to make, echos text on the screen continuously, but while thats happening, I want the user to be able to input something, so the program can detect the input and display something else. So I thought maybe I could make two scripts run to do each task.
View 5 Replies
View Related
May 3, 2011
I'm trying to call a specific variable based on a user selection. For example:
Code: Select a file:
[1] foo.tar
[2] bar.tar
Enter a selection: I have already coded each possible selection to have its own variable. If the user selects 2 I need to select $SELECTED_TAR2, or if they select 1 I need to select $SELECTED_TAR1 and then do something like this behind the scenes:
Code: cp /home/user/$SELECTED_TAR2 /home/user/backup/$SELECTED_TAR2
I was thinking something like this:
Code: echo "Enter a selection: "
read -e SELECTED_NUMBER
cp /home/user/$SELECTED_TAR$SELECTED_NUMBER /home/user/backup
[code]....
View 2 Replies
View Related
Sep 23, 2010
Here's a challenge I've been struggling for months with:
I have a bash script that reads URL addresses of our internal server and then executes some test commands on them. Something like this:
Code:
read -p "Enter URL: " url
sh execute-what-ever-to $url
After copy-pasting the URL the user taps the enter key and the script proceeds, but here comes the tricky part: I want this to work without the need to press the enter key after copy-pasting the URL.
"read -n" does not work in this case, as the URLs vary greatly in length. However, the URLs always end to the same string. They could be like "http://url1/END", "http://url2/END" and so on. So this ending string "END" could be theoretically used to recognize that the whole URL has been pasted.
View 2 Replies
View Related
Jun 17, 2010
I have a system setup script for my Slackware installations that pulls all packages and source files from another machine and sets everything up to be identical between machines. The script works as expected but make it entirely unattended. How do I make the bash script deal with automatically selecting "Yes" for, for example "Install x(Yes/No): " when prompted by a make file?
View 3 Replies
View Related
Jul 30, 2011
I'm creating a bash script to do some tasks for me. I would like the script to be run at a set time of everyday. My first question is if it is possible that if one of the commands in the script requires sudo, is there a way to get around it with out making sudo not require a password. Such as, is there a way to include the password in the script? If that is the case, I can always just set the file as read only by sudo. I've been looking for a way to do this, with no success. if I have a command that wants input, how do I give it to the program. For example, if I want to make a zip file that is encrypted, the command would go as:
Code:
zip -r example * -e
now how would I get the script to insert my wanted password.
View 14 Replies
View Related
Jan 19, 2009
I need to insert 3-4 lines of text to the beginning of a text file. The file is a largish MYSQL dump, the result of a backup shell script. This shell script should insert the required text.I've wrestled with sed, but lost.
View 2 Replies
View Related
Jan 13, 2010
I have to delete a certain line of text from the a textfile via ubuntu's shell scripting.I have done research, and it seems that most people advocate the usage of sed /d option. sed makes does not edit the text file. Hence, most options I discovered involved the use of a temporary variable/textfile and then overwriting the old file with the temporary new file. Is there anyway whereby I can bypass the use of temporary storage containers? I hope there is any magical combination of commands to edit the file directly.
View 3 Replies
View Related
Jan 8, 2011
I want to display something in my text view widget in glade using c code. that's all right.
now I need to attach a save button beneath the text view.so that on click the text view content should save as a txt file..
View 8 Replies
View Related
