I'm pretty new to bash scripting, but I really want to wrap my head around it.What I'm trying to do is: From directory "A": Go in to all subdirectories and rename all files within icrementally according to the directory name. SO:
|-- Varian
| |-- FB1-page132.pdf.png
| |-- FB1-page133.pdf.png
[code]...
I'm writing a bash shell script that among various other things will traverse through a directory with hundreds of files and rename those who match a pattern found in a config file. It's expected that only about one in ten files will actually match, and those who don't, will simply just be ignored for this purpose.
This should for instance cause the file "dBase program file December 1987.prg" to be renamed "Clipper source code December 1987.prg", and conversely "C++ source August 1996.cpp" to be renamed "C source code August 1996.cpp" etc.A sample file such as "Random Data File.dat" should not be renamed here since it's not mentioned in the config file..What is the quickest, most elegant way to do this in bash?I am thinking of using bash's built-in regex matching combined with the /bin/rename utility, but don't quite know how to get started to catch this..I guess there are plenty ways of doing this in perl and elsewhere as well, but since this has to integrate into a pre-existing bash script, that's what I'm looking for.Anyone out there with a spare moment to offer a hint in the right direction?
I have very little linux experience. And need some help with a bash script. I need to a script I can set cron to run to sort files out of a holding folder into final folders. It doesn't necessarily have to be bash, but I think it would be sufficient for this. File names are formatted as such when created: Dest-Date-Time-CID-Destination# I want the files to be moved from a all in one holding folder to a folder structure like this.
.../storage/year/month/day/Destination#/VarX(type)/hour/CID/'File'
I would need an if/else if/else statement to say if Dest = A set VarX = B If for example the file name was
infinity-20100927-17:00-1112223333-4445556666.wav
I would like the above file to end up moved from
.../holding
to
.../storage/2010/09/27/4445556666/Inbound/17/1112223333/infinity-20100927-17:00-1112223333-4445556666.wav
So the script will need to make directories based on information in the file name which is delimited by single dashes. Then move files from the holding folder to the newly created "sorted" folders.
I'm trying to write a script to process some images and rename them, or more specifically, renumber them so that pg_0001.png becomes pg_0.png, pg_0002.png becomes pg_1.png, etc. I've looked at the rename command and sed, but I'm not really very familiar with these. It should also be part of a bash script that I've written for the processing of these files - this is what I have so far:
Code:
#!/bin/bash
pdftk 2012 theatre Sep 2009.pdf burst
[code]...
I named a number of files with spaces in them, and I want to replace the space with "_". However, every time I write a command in the shell with the file name (eg "Spring 2011"), the shell doesn't recognize the file or directory. What can I do about this? Is there any way to use the unicode character for a space?
View 5 Replies View RelatedI was hoping to get some pointers on how to rename files based on database entry. I got hundreds of thousands of files that has GUID name assigned to it. only way to find out the file name is to look up the database table. Its obvious that this is not efficient. I couldn't find any tutorials on how to do this. Please point me to right direction. A starting point would be very helpful.
View 1 Replies View RelatedSequentially number files based on date modified (rename cli)
I'm almost done a larger script which takes all the pictures in a folder, converts it to video, and emails it to me. Everything worked fine until I realized the picture filenames weren't always starting at 1, then ffmpeg chokes.
I have a bunch of files in a folder which I need to rename to:
I don't want to install any additional packages and I'd like this to run in a single command if possible.
If not possible, then a bash script would work too.
Until now i haven't had to dabble with bash scripts.
I have a program that reads in data files. These are named datafile01_R, datafile01_G, datafile01_B, they then increment, so datafile02_R etc i have about 600 of these. the program reads in 3 data sets at a time from each run, so files_01 r, g, and b.
The program then does its magic, and outputs about 40 different files, depending on the file, they gone to folders named R, G, B, psa, or tracking.
The program itself has configuration files to say where the files should gone when analyzed, there is also the config files that reads in the data sets.
At the moment i have to run one set of data, then go in and manually change the input file location, and run again. But, doing this, even though a different data set, the new set overwrites the old set in one of the output folders. So i need a way to increment the output filenames after they are written and before the program is run again with the new data set.
I have thousands of files in hundreds of sub-directories that need renaming. The files I need to rename all look as below:
Note the .ogg.mp3.
been_all_around_this_world.ogg.mp3
I want to remove the .ogg from the files, so in this one case it would end up renamed looking like this:
been_all_around_this_world.mp3
What bash command can I use to rename or change the extension or name of a batch of files (for example, from .php to .html)?
Furthermore, is there a simple bash or python script/command that can be used to open a batch of plain text files one-by-one, search for all instances of a specific word, and replace all of those instances with another word?
bash script to give sensible names to a large number of photos. I hope to be able to run a script with an argument which will become the filename followed by a number beginning at 1.
Code:
./file_rename.sh Summer2009_
Summer2009_0001
Summer2009_0002
Summer2009_0003
[Code]....
I have many files in a directory. They all have names with a .pdf extension. How can I remane all of them so that they are named as so... 1.pdf, 2.pdf, 3.pdf? I want to do it with one command or somehow that I do not have to manually rename each one.
View 1 Replies View RelatedI have scowered the internet for the answer to this one. I need a script to rename multiple files to the same exact name, run a program on the file then do the same for the next file. We have a unix backend system that is expecting to load the file with the filename of cards.in So I will have files named card.2009xxx, like i said i will have around 4 or five of those. I want the script to rename card.2009xxx to cards.in, run our unix program on cards.in which inturn changes the file name and once complete i want the script to rename the next cards.2009 to "cards.in"Until there are no more left in the directory and the unix program has processed all the files. All of this is occurring in the same directory. I have written some scripts but they fail by moving for example cards.200901 to cards.in then immediately moving cards.200902 to cards.in and that is not good because it is overwriting valuable data
View 10 Replies View Relatedi have lots of files with dots insde file name for example:
document.1.is.bigger.doc
resume.version12.doc
10.photo.www.cnn.com.jpg
i want to rename all files in that directory to be the same (with same extention) but convert dots to underscore "_"
how can i do that on bash script / php.
I want to rename all files in a directory to "random" names(the point is that the name does not exist, it can be anything). In my case is it *.wav file i want to rename, i basically want to burn cd's to my pc with cdparanoia, then rename them and put them in a directory with other songs i have which also have been given random names. (i'm creating a big music directory where the songs have no names)And i will eventually make a script to make things easier, but for some reason i can't think out a way to rename the files randomly, and i guess "$RANDOM" is a good variable to use but.. how?EDIT: And while i'm at it, is there any way to use the "play" command in the terminal, by "sorting" music files in a directory randomly, and then play them, so it will not be played the same order again?
View 4 Replies View RelatedHow would I rename all files with a leading decimal point recursivley? I some how got all my music files to have a decimal point.I tried the below and got a " sed argument to long".[CODE]find /media/MUSIC -type f -name "*.wma" | xargs -0 sed -i 's/.(.*)/1/'[CODE]
Another question, can i just use -type f with out -name ? I am sure that all the files got the decimal point added as the first character.
I am trying to write a bash script that will extract a .cbr (.rar) file, traverse the extracted files in alphabetical order and rename them 001.JPG, 002.JPG, 003.JPG, etc.So far I only have this much to extract it:
Code:
#!/bin/bash
#
[code]....
I am trying to create a function within my .bashrc that will process all of the files that do not end with .sh within a directory and execute them.The following is what I have so far. I am missing a way of excluding files that end with .sh though.
function startall {
for file in /etc/init.d/*.; do
"${file}" start
[code]...
I'm trying to write a bash script that gets the list of files in a directory and puts them into a variable, then checks each entry and outputs them as follows:
item1 is a FILE
item2 is a DIR
item3 is a DIR
etc etc.
I am able to get the list of files into a variable, but unsure how to get the output I want.
Originally Posted by Kenny_StrawnPlease wrap [CODE] tags aroung any code posted here. The full source that way could still be posted.I am trying to copy all the files in the directory based on the modification date (i.e created on Dec 29). Not able to find the proper command for this. This is what I have tried.
(none) login: root
#
# cd /mnt/hd/
[code]...
I need to rename the resulted searched files from a loopI have the following code:
find . -name DOC* | while read i
do
find $i -type f -name '*.txt'
done
basically, I am searching for all txt files inside any folder starting with DOC name.this code is working fine with me.I need to rename those .txt files to .txtOLDOS: Ubuntu 10.4Bash shell
I want to search a directory recursively looking for new .rar/ .zip files. When a new file is found I want to extract the contents to another directory. To top things off would like to rename the source file as something like original.rar.extracted.
View 8 Replies View RelatedI have a directory listing with many subdirectories having many files. I want to recursively search for the oldest 5 files starting from the base directory and not 5 from each subdirectory. I am writing a shell script which sorts them using ls -lRtur|egrep "txt|jpg" > /tmp/file1 Now from this /tmp/file1 file I want to sort the files same as what the ls -ltr command does that is oldest file time to newest file time first. How do I sort based on Linux time stamp? The files itself also have Linux timestamps embedded in them So I can sort based after extracting them as well if it is easier.
My /tmp/file1 has entries like below.
-rw-rw-r--. 1 usr1 usr1 705 2010-01-22 17:25 sample20100603173659.jpg
I want to get the 5 oldest files and then delete them.
Newbie 1st post here. Trying to find the most efficient way to copy a file to a different directory and rename it with a date stamp extension. Looking to accomplish this with one command if possible.
File = make_file
Full path /home/user1/bin/scripts/make_file
would like to move to the following directory /home/user1/bin/scripts/archive/
I'm trying to find out how to use command substitution along with the date command that when I copy the file to the archive directory it gets renamed with a time stamp extension. It should look something like "make_page_12:00:00-24-10-2010" I've tried a few different combinations using the cp and mv commands but can't seem to get it to work the way I want to.
Create a copy of the file above and call it commands.sorted. Use the vi command to manually sort this file. I.e. use yy to copy a line, P or p to paste a line, and dd delete a line. Order the commands with the two lines starting with double quotes first. Then list the rest of the command in alphabetical order.
Anyone have any ideas what he's talking about? Can I copy a file and rename it at the same time while copying it to the same exact directory again? Now sure what the two lines things means either. I have an email out to him but it usually takes a long time for him to answer me. I got alot of work to do so everytime I get hung up it kills me.
I have a folder containing the output from Windows XP "File and Settings Transfer Wizard" - the folder refuses to be imported into any flavour of Windows and the original windows system is no more - so I found a little program called fastconv [URL] which extracted all the files but fails to rename them - been working on this solidly for 3 days now, there are 47,000 files in 20gb, so naturally the customer is very concerned.
I noticed that Ubuntu cleverly recognises the type of file, assuming its looking at the contents of the file rather than the extension.
Is there any way I can automatically rename the files based on the mime type?
I would like to rename a large batch of photos based on their iptc title. i had a quick squiz at exiv2, but it doesn't seem to do it (easily at any rate). is there another tool you all know about?
I suppose a shell script could do it with exiv2 getting the title out from the files, but I am no good at shell scripting.
I am trying to write a simple script to list all the files in a directory. The script I wrote was as below where the pdb_files is a directory and all the files which I want to list are in that folder.
Code:
files=`ls -F pdb_files/*THERMO*`
for inFiles in $files
do
echo $inFiles
[Code]....
I need help with renaming files and folders in one go.
I have a folder called /opt/utility/pictures/
Inside that folder have sub-folders and files such as code...
I have about 50 files that the script will operate on, they are all located in the same directory.I need a bash script that will operate on all files in a directory. The script needs to add two lines to the beginning of each file based on the file name, and one line to the end of the file.A file named myfile.h should add these two lines to beginning of the file:
Code:
#ifndef MYFILE_H
#define MYFILE_H
[code]....