I have a Directory of files over time the directory has become a pain to manage... Its now a few 100GBs each file has a partner .log file so id would want some logic in keeping these together..So I want a script to move the files into sub-directories with a limit or 4GB and then i'll burn each of the directories to DVD.
View 14 Replies
Im wondering how to create a menu in c like bash's select. I imagine there is already something out but I don't know what it would be. Im a c newb but been scripting for a long time now and trying to pick up a little c.this would be what I am looking to display:
Code:
1) option 1
2) option 2
3) option 3
Make a selection:obviously 1,2,3 would be the only valid selection and anything else would say invalid or something like that.
I have a (rather large) database of mp3 track information. I also have several directories of the actual mp3s. I'm trying to write a simple bash script that will check the contents of the directories against what's in the database, and upon finding a file that isn't in the database, do something.
Here's what I have so far:
Code:
The trouble I'm having (in the sample directory of "/mnt/music/B/Beatles, The/" the file "Beatles, The - Taxman.mp3" isn't in the database.) is getting it to actually trigger an error when an entry isn't in the database.
Once triggering on a non-entered file is working, any way to get it to traverse the entire /mnt/music hierarchy?
I've got the following code and kludge. It's working okay except that there's a directory called "Archive" which I don't need to backup. I've tried various combinations of &&, -a, etc., and I'm kind of at a loss for getting this right.
Here's the code I have so far:
Code:
#!/bin/sh
# backup subdirs as individual tarballs with prepended timestamps and
# move them somewhere else.
# --exclude "/path/to/dir/*" (Doesn't seem to work)
[Code]...
How can I write that line so that I can loop through all of the subdirs, tarring them up, but excluding the "Archive" subdirectory?
I am programming in bash and really stuck finding directory names. I have a script to find all the .php files on my / partition which will return the whole path. Is there a way to print directory hierarchy with all those values leaving out the forward slashes.
View 10 Replies View RelatedI am trying to write a simple script to list all the files in a directory. The script I wrote was as below where the pdb_files is a directory and all the files which I want to list are in that folder.
Code:
files=`ls -F pdb_files/*THERMO*`
for inFiles in $files
do
echo $inFiles
[Code]....
$val = mkdir $directory, 755
print $val;
does't create directory but return as value '0'
[code]....
I have about 50 files that the script will operate on, they are all located in the same directory.I need a bash script that will operate on all files in a directory. The script needs to add two lines to the beginning of each file based on the file name, and one line to the end of the file.A file named myfile.h should add these two lines to beginning of the file:
Code:
#ifndef MYFILE_H
#define MYFILE_H
[code]....
i was wondering if there's a bash script to check the amount of files in a directory with an IF statement..
View 8 Replies View RelatedI'm trying to write a script that will prompt the user for a username/password, then create that user/password in the right groups on all my machines. I know this is kind of a long way around to avoid a NIS server, but I like making my life more difficult.
This is what I have so far:
Code:
the script has 2 problems: The "if" functions return an error and do not compare the strings successfully. whatever password is entered does get applied properly and the user is unable to login
I want to make a script that will automatically change me into the directory I was in previously. I don't know if this could be added to my .bashrc or have it be a standalone script. Can I just alias last="/bin/pwd > /path/to/file"? But then I'd have to add it to the cd command somehow right?
View 4 Replies View RelatedI have index.html page with tables rows and cells. Within table I have:
Quote:
<table width="100%">
<tr>
<td class="form-font" width="40%" align="left">
<iframe src="create.html" width="100%" height="200" frameborder="no" scrolling="no">
[Code].....
but in index.html appears the following screeshot.jpg. create.html and index.html are both in /var/www directory. Why create.html appears in /cgi-bin directory?
In my tmp directory some logs are creating continue (with name logs.txt1, logs.txt2 up to 245). Some times these logs are creating continue within 1 or 3 second gap, now I want to write a bash script that continue monitor the tmp directory and if any time logs create simultaneously within 1 or 3 section gap it will alert me..( generally logs are create with the gap of 5 or 10 minutes duration or some time after one hours )
View 1 Replies View RelatedI have a directory and sub-directories (4 or 5 depths). There are several type with extension in them (*.mp3, *.wma, *.jpg, etc). I would like to copy the whole directory to another location recursively but only *.mp3 files.
View 11 Replies View RelatedI want to read an ftp site [URL]...and download the sub-directory structure and ONLY the tagfiles to the local directory.
FROM THIS:
Code:
slackware
+--a
| |aaa_base-12.2.0-noarch-1.tgz
| |aaa_base-12.2.0-noarch-1.tgz.asc
[code]....
I tried wget + grep but that didn't work too well.
I'm trying to create an SSL certificate and answer the questions inside a bash script. The command used to create the SSL certificate
Code: openssl req $@ -new -x509 -days 365 -nodes -out /etc/apache2/apache.pem -keyout /etc/apache2/apache.pem
The first question asked is. Country Name (2 letter code) [AU]:
I'm trying to create a new directory using the mkdir command.
Code:
home@ubuntu:~$ mkdir <aicoursework>
bash: syntax error near unexpected token `newline'
that's the error that i keep getting, what am i doing wrong?
I'm creating a bash script to check how much free space is left in /var directory then, if it hits a certain threshold, delete certain files with numbers for extensions (e.g. fileA.1, fileA.2 fileA.3, and fileA.4, fileB.1, fileB.2 fileB.3, and fileB.4 ). Here's a snippet from my script:
[Code]...
If I use a * as a wildcard for the number extension, the script fails. Maybe regex would work here, but I'm not particularly accomplished at it. Or some other construct.
I have been searching for 90 minutes for something that I "think" should be fairly easy. I'm pretty new to Bash Scripting so I could be completely wrong. Then again it may be a weird request to even need something like this. But here it is.I have a script written to convert data from one of our software version to another. The only thing I need to add to it is a "check to make sure the user running the script is in the /tmp directory".
View 7 Replies View RelatedI'm starting bash shell script and I'm looping without any solution.
I'm trying to find some files under a folder hierarchy and in case of errors moving these files to a destination folder under the same hierarchy recreating this hierarchy if not exists.
Finding all ._* files under /src and moving them to /dest recreating folder1 or the others which contains ._* files but without moving files which does not correspond to the pattern.
Code:
I tried find command and I'am getting all needed files
Code:
But I don't know how to use the output to get the parent folder of files which are found to
1- create folder with mkdir -p /dest/folder1 or /dest/folder1/folder4
2- move found files from /src/... to /dest/... with rm command
I'm working on a find command as this trying to do all in the same line but ... little lost
Code:
I'm having a bit of trouble understanding umask and mkdir in C++. In my program, I want to create a directory with the permissions 755.
If I do:-
Code:
The permissions come out all messed up.
But if I do:-
Code:
The permissions are set as expected.
I am having trouble understanding why umask(0); is needed, and what is the 'proper' way to use it so I can make my directory. From what I can understand from the man pages and everything, I need to set the umask in my program to allow it permission to make a directory with those permissions? And I don't get why umask(0); fixes it anyway!
I have very little linux experience. And need some help with a bash script. I need to a script I can set cron to run to sort files out of a holding folder into final folders. It doesn't necessarily have to be bash, but I think it would be sufficient for this. File names are formatted as such when created: Dest-Date-Time-CID-Destination# I want the files to be moved from a all in one holding folder to a folder structure like this.
.../storage/year/month/day/Destination#/VarX(type)/hour/CID/'File'
I would need an if/else if/else statement to say if Dest = A set VarX = B If for example the file name was
infinity-20100927-17:00-1112223333-4445556666.wav
I would like the above file to end up moved from
.../holding
to
.../storage/2010/09/27/4445556666/Inbound/17/1112223333/infinity-20100927-17:00-1112223333-4445556666.wav
So the script will need to make directories based on information in the file name which is delimited by single dashes. Then move files from the holding folder to the newly created "sorted" folders.
I'm writing a script to execute bash commands in the PHP CLI. I would like to suppress errors from bash and write my own error message if an error occurs. So far I have this (assuming log.txt doesn't exist!):
Code:
tac log.txt 2>/dev/null
Which works as expected, tac kicks up an error but the error is suppressed, but when I use this:
Code:
tac < log.txt 2>/dev/null
I get:
Code:
bash: log.txt: No such file or directory
The tac error is suppressed but bash still gives me a dirty error.
I would like to create a bash menu script for my home server For instance if i were to type ./script It would then bring up 3 options
a. Create a backup
b. Restore files from a backup
c. Quit
If you were to select a or b it should then ask you were you want to backup or restore from. And if i were to type in an incorrect letter i should get an error and take me back to menu. I have attepmted this a view time now and have magaged to get the menu up using parameters
Following function obtains the system-maintained structure for a message queue:
Code:
And following function simply resizes a message queue to a user-defined value, namely, "size":
Code:
My question is if there is a theoretical limit on user-defined message queue sizes.
To put in other words, is it possible to increase the default message queue size to any user-defined value as long as that certain value does not exceed the size of system's physical memory ?
I use 64-bit Ubuntu 9.04.
To start, I'm writing a script to check a file's date via FTP. Here's the portion that I'm having problems with:
Code:
function checkRemote
{
[code]...
I recently bought an host to have a personal website and would like to create a bash script to create make a mirror copy of it and then add it to crontab to run once a week. Essentially what I want to do is to get the website by using wget -m ftp://user***@ftp.host/mydir
Once this is done I'd like to have everything in an archive called mysite.date.tar.7z I've no experience at all of bash scripting but I guess this should be an easy task? How to make the user and password not visible ? Is there any other option better than wget? (maybe rsync it works better?)
I've run into a problem with my bash program.
Code:a mkdir -p /home/chris/Downloads/ARCHIVE/`date -I` find /home/chris/Downloads* -mtime +14 -exec "cp {} /home/chris/Downloads/ARCHIVE/`date -I` ;
It's meant to move old files from my Downloads folder into an archive file (later tar them). The directory exists, I've used $PWD and nautilus and ls to make sure it's there, yet for every file it gives
Code: find: `cp /home/chris/Download/foo.bar /home/chris/Downloads/ARCHIVE/2011-08-19': No such file or directory I tried to test it on a different destination, specifically my home folder. IT still gave me the error.IS it a bad syntax within find or something else? I'm running a 32-bit system with 11.04
I am a student studying computer science course.
Well, I am facing problem when doing lab questions.
I must use DLXLinux bundled in Bochs (bochs.sourceforge.net).
I am required to use the /usr/local directory.
In /usr directory, there is no directory named 'local' but there is one thing called 'local@'. So, when I try to use mkdir command to create 'local' directory in /usr , there are error "cannot make directory.....".
Look at my screenshot at [url].
I get the following error whenever I launch bash:
Code:
mkdir: cannot create directory `/dev/cgroup/cpu/user/5900': No such file or directory
bash: /dev/cgroup/cpu/user/5900/tasks: No such file or directory
bash: /dev/cgroup/cpu/user/5900/notify_on_release: No such file or directory
It seems like it's probably from this part of .bashrc:
[Code]...
What does this code do, why, and what's causing it to go wrong?
