Programming :: Bash For Loop - All Responses On One Line
Nov 18, 2010
I'm writing a mass snmp toner check which polls any toners available to be snmp polled, however when using a loop statement I get the results on different lines; which sounds good, however the tool I use to check with (nagios) ignores the new lines.
Is there any way I can get the output on one line? Also, I need to raise a fault if any of the toners are below a specific level (with nagios you raise faults with the exit code) - any way I can do this without exiting the loop. Code below with bits and bobs commented out.
Code:
check_ink_levels ()
{
for ID in $INKS
do
[Code].....
View 10 Replies
ADVERTISEMENT
Mar 31, 2011
I need to rename the resulted searched files from a loopI have the following code:
find . -name DOC* | while read i
do
find $i -type f -name '*.txt'
done
basically, I am searching for all txt files inside any folder starting with DOC name.this code is working fine with me.I need to rename those .txt files to .txtOLDOS: Ubuntu 10.4Bash shell
View 10 Replies
View Related
Jun 7, 2010
The script that Iam trying to write is running a for loop and reading line by line from a text file. inside this for loop i would like to execute update SQL statement .
a pesudo code is
Quote:
`$ISQL -U $username -P $Password -D $Dbname -I $INTERFACE <<QRY
for id in $idlist #idlist iam reading from a file
[code]...
View 8 Replies
View Related
Jan 1, 2011
I have a file like below:
PU12829,24869;PD15733,24869;PD15733,19785;PD12829,19785;PD12829,24869;
PU4599,20915;PD9924,20915;PD9924,18898;PD4599,18898;PD4599,20915;
PU12829,24869;PD15733,24869;PD15733,19785;PD12829,19785;PD12829,24869;
PU4599,20915;PD9924,20915;PD9924,18898;PD4599,18898;PD4599,20915;
PU1723,3423; #this line is ignored to short
[Code]...
What I'm trying to do is while true, cut each line from file that begins with PU and thats longer than 12 characters and write to a increasing numbered file for each line. Stating with object1 etc.
View 14 Replies
View Related
Jul 3, 2009
I know of 4 different ways to use a for loop:
1. for I in {1..10}; do echo $I; done|
2. for I in 1 2 3 4 5 6 7 8 9 10; do echo $I; done|
3. for I in $(seq 1 10); do echo $I; done|
4. for ((I=1; I <= 10 ; I++)); do echo $I; done
I have a script which uses the 1st form of for loop. I'm trying to modify it to use a variable instead of a static hard-coded value in the section that controls the looping.of the for loop.
I've tried all different ways of quoting and escaping the variable, and the problem is that the quoting chars and escape char are being translated and passed into the loop along with the value stored in the variable.
For example, to change the start value of 1 to whatever value I want passed in through a variable:
Change:
I have tried: {{$a}..10} and {`$a`..10}, to have the variable evaluated first.
I have tried using the eval() function.
I have tried single and double quotes and the backslash escape character.
Nothing I've tried works. It's probably a syntax error.
View 14 Replies
View Related
Feb 2, 2010
Never mind, I figured it out myself. Firstly, the old version of BASH I'm using doesn't support
Code:
for i in {1..27}
So I had to use
Code:
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
Secondly, it was simply
Code:
#!/bin/bash
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
do
[code]....
View 2 Replies
View Related
May 26, 2011
So I need to write a bash script that can read lines and column 3 from a file. It needs to start on line 16 and read every 20th line starting from there. But the value that it reads needs to be checked, should it be too great I need it to shut the program down.I'm pretty new to bash, but my ultimate goal is being able to safely run a program on a GPU for an extended period of time with out worrying about it overheating. I have a command that outputs information from the GPU every second, and I can save this to a file. So all I really need is something to read and check that file, I played around a bit with the awk command and can't get it to work within my for loop with dynamic variable.
View 7 Replies
View Related
May 26, 2011
I need to know how to assign a result from a select. I am clueless on the sytax. I am trying this in bash. Maybe I am not assigning the array right. It gives me the whole row in the echo instead of just field a. How do I get fieldA = a in the select. Note script was stripped for security on database info but the syntax is same.
Code:
#!/bin/sh
results="$(mysql --user ${DB_USER} -p${DB_PWD} ${DB_NAME} -Bse 'select a,b,c,d from tblMytable')"
for rows in "${results[@]}"
do
fieldA=${rows[0]};
echo ${fieldA};
done
View 2 Replies
View Related
Jul 17, 2011
How do I get this loop to stop on each increment? This script does work but I would like it to stop at each increment, remember what the value of $n is, then continue until it gets to 7. I have worked so hard on this. My brain is hurting now.
[Code]...
View 2 Replies
View Related
Mar 26, 2010
I am trying to read the names of hosts from a file and do a ssh to see if processes are all running or not.
Here is the outer loop that is causing problem:
hosts.lst is a text file that has the host names in each line.
The problem is that the loop just breaks after the first run. Somehow while read line becomes invalid when the body of the loop does the ssh and returns.
View 5 Replies
View Related
Oct 14, 2010
I have a bash variable where the content looks like this where ;f1; and ;f2; are delimiters:
;f1;field1value1;f2;field2 value1 ;f1;field1value2;f2;field2 value2 ;f1;field1value3;f2;field2 value3
So what I need is to extract and put into variables each combination of f1 and f2 in a loop to something like that:
#first pass of the loop I need:
f1=field1value1
f2=field2 value1
#second pass of the loop I need:
f1=field1value2
f2=field2 value2
# third pass of the loop I need:
f1=field1value3
f2=field2 value3
View 15 Replies
View Related
Sep 12, 2010
I currently have 3 files with floating point data that I wish to have in a single file with the format:
Code:
F1 F1 F3 Output
a1 b1 c1 a1 b1 c1
a2 b2 c2 a2 b2 c2
a3 b3 c3 a3 b3 c3
a4 b4 c4 a4 b4 c4
View 3 Replies
View Related
Feb 4, 2011
I would like to know how do I print the line # in a script. My requirement is, I have a script which is about ~5000 lines long. If there are any errors happen I just exit. And I would like to add the line # of the script where the error happened.
View 3 Replies
View Related
Jul 7, 2011
bash 3.1.17(2) I'm trying do write a shell script which must operate on each line of an ASCII text file. So, all the code must be inside a loop, and inside the loop, the first thing should be to read the next line from the file. I have the bash read command. But it reads from stdin. Any way to make read from a file?
View 6 Replies
View Related
Mar 8, 2011
I have a set of files containing data that I need to re-arrange into one single property list.
The files that I have look like this:
Code:
# cat uk
<string>10</string>
<string>11</string>
...
<string>29</string>
[Code]....
So the lines in the files match up but I haven't found a way of reading several files line by line.
View 3 Replies
View Related
Aug 18, 2010
I'm trying to make another file annotation script a little speedier than it has been by the up-until-now proven method of checking the last four characters in a filename before the "dot" (eg .jpg, .psd) against a list of known IPTC categories and Exiv2 command files. It occurred to me that if one script generated a list of files in directory foo, and the same or another script sorted that list by that four-letter tag,then that list could be used(instead of a for/do/done loop on the real files in the folder) by the command-file-matching script to "vomit out" which annotator file would go with file nastynewfile.jpg, f'r'instance. The script I had been using for this task looks like this:
Code:
while read 'line';
do
sp=$(echo $line)
vc=$(echo $sp | cut -d"," -f1)
cv=$(echo $sp | cut -d"," -f2)
[code]....
Where I seem to be stuck is with how to sort the lines in templist, which may be any number of different lengths, from back to front. sort -k looked promising, except it seems only to work the other way round. I thought of invoking a
Code:
q=$(expr length $line); echo $q
n=$[q-8]; echo $n
kind of thing, but that presented the problems of how to sort by those, how to tell sort where to find them (grep?) and how to "stitch them back in" to the original list, which is what I want to sort in the first place.
View 14 Replies
View Related
Jan 10, 2011
I have a wrapper script called MAIN.sh that runs several other script. It looks like this:
Code:
#! /bin/sh
script1.sh
[code]...
View 6 Replies
View Related
Nov 29, 2010
I have a text file (myfile.txt) with columns a,b,c.
123 2 23
124 2 24
125 2 22
[code]...
View 4 Replies
View Related
Aug 21, 2009
I'm trying to read content of file to variable and use this variable in for loop. The problem is, when I have c++ comment style in file - /*. Spaces in line are also interpreted as separated lines.
For example:
Code:
Changing $files to "$files" eliminate these problems but causes that whole content of variable is treated as one string (one execution of loop).
View 6 Replies
View Related
Nov 29, 2010
i have a text file like
abc abc abc abc
abc abc abc abc
--- --- --- ---
i want to add a string xyz to end of each line..
abc abc abc abc xyz
abc abc abc abc xyz
abc abc abc abc xyz
--- --- --- --- xyz
--- --- --- --- xyz
how do i do this in bash?
View 13 Replies
View Related
Apr 9, 2011
I would like to delete a single line from a file that contains many lines passing through the same values as the two parameters. Again, I would like to delete a single line and not all those that contain parameters. How can I make bash?
View 14 Replies
View Related
Jan 22, 2010
I keep time sheet entries at work in an sqlite database called 'timesheet'. I have a shell script called 'today' which queries for all timesheet entries which are less than 24 hours old; it looks like this:
Code:
#!/bin/bash
echo "select datetime(start_time, 'unixepoch', 'localtime'), datetime(end_time, 'unixepoch', 'localtime'), project, site, duration from timesheet where start_time > strftime('%s', 'now', '-1 day', 'localtime');" | sqlite3 ~/.timesheet/timesheet.db
In an effort to make it more readable, I've put the query inside a here document:
Code:
#!/bin/bash
cat | sqlite3 ~/.timesheet/timesheet.db << query
select
[Code]...
View 2 Replies
View Related
Feb 4, 2011
I would like to know how do I print the line # in a script. My requirement is, I have a script which is about ~5000 lines long. If there are any errors happen I just exit. And I would like to add the line # of the script where the error happened.
View 2 Replies
View Related
Mar 24, 2010
Below is the part of my bash script which uses awk to to fetch a line from a file. Choice is set by a case, and i know it is receiving a proper number because of the echo statement. The problem is with the syntax of the awk command it says the error is with one of the ', but when I run the command at the command line and replace "$choice" with a number it works properly. So I am not sure what is going on.
echo "announcing choice $choice"
command="awk 'NR = "$choice"' beerpong.txt | say"
$command
View 8 Replies
View Related
Jul 7, 2011
I need a command to search a string in a file and then to convert the next string in the same line from hexadecimal to binary. I was able to put everything in capitals. The original file can be as such:
E 2
C 1 794
T ffff
E 2
C 1 787
It is not always FFFF! I am trying to do this in a file at once, not reading line by line (using while).
View 5 Replies
View Related
Jul 8, 2011
Bash 3.1.7
Suppose this bash script:
Code:
#!/bin/bash
ls foo
I would like the output to be
Code:
ls foo
foo
That is, the command is first echoed then executed. Is it possible to do this? Or is the only way to debug the script?
View 2 Replies
View Related
Apr 23, 2011
I've got a bash script I'm using to download a text file list of links via axel. What I'd like to do is automate the movement of completed links in the for loop when axel has successfully completed the download. This is what I've got. I can figure that I can just echo append the line to a new file, but what is the easiest way to delete the line with the link I just downloaded?
Code:
#!/bin/bash
for i in $( cat $1); do
axel --alternate --num-connections=6 $i
export RC=$?
[code]....
View 14 Replies
View Related
Feb 15, 2011
At the moment I got my md5sum checking working which I write to a text file and see below.
If the md5sum works it will write the output to check2.md5 test.txt: OK
If the md5sum fails it will write test.txt: FAILED
How do I write if statement to check the output whether or not the md5sum failed or not ?
check1="/home/ops/Desktop/test1/check1.md5"
check2="/home/ops/Desktop/test1/check2.md5"
cd /home/ops/Desktop/test1
md5sum test.txt > $check1
[Code]....
View 2 Replies
View Related
Jul 16, 2010
I'm writing a Bash script to take IPTC keywords from a text file and write them, via Exiv2, to several (first batch is 100) JPEG files in a single directory. The script has one while loop inside another while loop, both terminated, but I'm pretty sure that's not my problem. I think it's how I'm incrementing the "counter" variable, although it could also be the method of parsing the text lines from the file (using cut with delimiters that have worked fine in simpler scripts).
Here's the code as I've worked it up to this point.
Code:
And yes, "keywords" checks out in Crimson Editor, Emacs GUI and nano as an ASCII file with UNIX line endings. No issues on that score.
Feeding each line consecutively into a terminal (excepting the exiv2 command) works fine: each variable echoes with the part of the text line used as a variable value as it should, even when the b variable is incremented the quick&dirty way (up arrow three commands and hit enter).
Running the above script in eval mode (sh -x) stalls after setting the b variable to one and reading in the first line of text. I'd like to know why. I'd also like some advice on another reliable method of parsing the read-in lines.
View 14 Replies
View Related
Jul 20, 2011
I am writing a bash script to run everyday and output results to a file. When the same results are produced i want to overwrite the line from the previous day. (Or remove and add). So if the script finds a variable in a line. i want it to output the results to that line . sed -i did not work for me; sed: couldn't open temporary file ./sedTvOCEg: Permission denied
View 10 Replies
View Related
