Programming :: Bash Script That Reads Lines In While Loop
May 26, 2011
So I need to write a bash script that can read lines and column 3 from a file. It needs to start on line 16 and read every 20th line starting from there. But the value that it reads needs to be checked, should it be too great I need it to shut the program down.I'm pretty new to bash, but my ultimate goal is being able to safely run a program on a GPU for an extended period of time with out worrying about it overheating. I have a command that outputs information from the GPU every second, and I can save this to a file. So all I really need is something to read and check that file, I played around a bit with the awk command and can't get it to work within my for loop with dynamic variable.
View 7 Replies
ADVERTISEMENT
Mar 11, 2010
Here the description of the issue I am having.I am writing a bash test script which reads lines from a file, builds ISO messages, sends them to a server, reads the response with response code and reports the result of the test to a file or on the screen.The message that I need to send is 94 characters long.Here's the portion of a code that I initially wrote:
#~ Open socket.
exec 3<>/dev/tcp/172.26.0.25/9991
#~ Send msg.
[code]...
View 4 Replies
View Related
Mar 31, 2011
I need to rename the resulted searched files from a loopI have the following code:
find . -name DOC* | while read i
do
find $i -type f -name '*.txt'
done
basically, I am searching for all txt files inside any folder starting with DOC name.this code is working fine with me.I need to rename those .txt files to .txtOLDOS: Ubuntu 10.4Bash shell
View 10 Replies
View Related
Nov 18, 2010
I'm writing a mass snmp toner check which polls any toners available to be snmp polled, however when using a loop statement I get the results on different lines; which sounds good, however the tool I use to check with (nagios) ignores the new lines.
Is there any way I can get the output on one line? Also, I need to raise a fault if any of the toners are below a specific level (with nagios you raise faults with the exit code) - any way I can do this without exiting the loop. Code below with bits and bobs commented out.
Code:
check_ink_levels ()
{
for ID in $INKS
do
[Code].....
View 10 Replies
View Related
Jun 7, 2010
The script that Iam trying to write is running a for loop and reading line by line from a text file. inside this for loop i would like to execute update SQL statement .
a pesudo code is
Quote:
`$ISQL -U $username -P $Password -D $Dbname -I $INTERFACE <<QRY
for id in $idlist #idlist iam reading from a file
[code]...
View 8 Replies
View Related
Jan 1, 2011
I have a file like below:
PU12829,24869;PD15733,24869;PD15733,19785;PD12829,19785;PD12829,24869;
PU4599,20915;PD9924,20915;PD9924,18898;PD4599,18898;PD4599,20915;
PU12829,24869;PD15733,24869;PD15733,19785;PD12829,19785;PD12829,24869;
PU4599,20915;PD9924,20915;PD9924,18898;PD4599,18898;PD4599,20915;
PU1723,3423; #this line is ignored to short
[Code]...
What I'm trying to do is while true, cut each line from file that begins with PU and thats longer than 12 characters and write to a increasing numbered file for each line. Stating with object1 etc.
View 14 Replies
View Related
Jul 3, 2009
I know of 4 different ways to use a for loop:
1. for I in {1..10}; do echo $I; done|
2. for I in 1 2 3 4 5 6 7 8 9 10; do echo $I; done|
3. for I in $(seq 1 10); do echo $I; done|
4. for ((I=1; I <= 10 ; I++)); do echo $I; done
I have a script which uses the 1st form of for loop. I'm trying to modify it to use a variable instead of a static hard-coded value in the section that controls the looping.of the for loop.
I've tried all different ways of quoting and escaping the variable, and the problem is that the quoting chars and escape char are being translated and passed into the loop along with the value stored in the variable.
For example, to change the start value of 1 to whatever value I want passed in through a variable:
Change:
I have tried: {{$a}..10} and {`$a`..10}, to have the variable evaluated first.
I have tried using the eval() function.
I have tried single and double quotes and the backslash escape character.
Nothing I've tried works. It's probably a syntax error.
View 14 Replies
View Related
Feb 2, 2010
Never mind, I figured it out myself. Firstly, the old version of BASH I'm using doesn't support
Code:
for i in {1..27}
So I had to use
Code:
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
Secondly, it was simply
Code:
#!/bin/bash
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
do
[code]....
View 2 Replies
View Related
May 26, 2011
I need to know how to assign a result from a select. I am clueless on the sytax. I am trying this in bash. Maybe I am not assigning the array right. It gives me the whole row in the echo instead of just field a. How do I get fieldA = a in the select. Note script was stripped for security on database info but the syntax is same.
Code:
#!/bin/sh
results="$(mysql --user ${DB_USER} -p${DB_PWD} ${DB_NAME} -Bse 'select a,b,c,d from tblMytable')"
for rows in "${results[@]}"
do
fieldA=${rows[0]};
echo ${fieldA};
done
View 2 Replies
View Related
Jul 17, 2011
How do I get this loop to stop on each increment? This script does work but I would like it to stop at each increment, remember what the value of $n is, then continue until it gets to 7. I have worked so hard on this. My brain is hurting now.
[Code]...
View 2 Replies
View Related
Mar 30, 2010
I have a file witch I need to list 10 line by 10 lines with something like press enter to go on in between.
Well, the problem is that i have absolutely no idea on how to implement this.
Can you give me some points?
View 3 Replies
View Related
Oct 14, 2010
I have a bash variable where the content looks like this where ;f1; and ;f2; are delimiters:
;f1;field1value1;f2;field2 value1 ;f1;field1value2;f2;field2 value2 ;f1;field1value3;f2;field2 value3
So what I need is to extract and put into variables each combination of f1 and f2 in a loop to something like that:
#first pass of the loop I need:
f1=field1value1
f2=field2 value1
#second pass of the loop I need:
f1=field1value2
f2=field2 value2
# third pass of the loop I need:
f1=field1value3
f2=field2 value3
View 15 Replies
View Related
Jan 28, 2010
i have a sorted file with many repeated lines like this:
1ujw
1ujw
1ul1
1us7
[code].....
i need to calculated haw many times each line is repeated, for ex
1ujw 2
1ul1 1
1us7 5
etc.
View 5 Replies
View Related
Mar 26, 2011
Using awk I pull the first field of a random line from my datafile.myvar1=`awk -F" " 'NR=='$randline' {printf "%s", $1}' myfileThis works fine. The problem is there will be empty lines at the end of the file. Rather than using awkto filter out blank lines I would like to figure this out first.So I test $myvar1 for a blank string after setting $randline to one that I know is blank:test -z "$myvar1" && echo "true" || echo "false"But, this returns "false"? So the string is not zero length. Why? It's a tab-separated file. Is awk storing the tab with the $1 field or something.This is where I get headache. I try to echo my variable to see what it looks like.
echo "$myvar1"
outputs: nothing
echo "My variable is [$myvar1]"
outputs: [y variable is [
Why is the closing bracket at the beginning? What character could be stored in $myvar1 that would do such a thing and how did it get there?
View 7 Replies
View Related
Jun 9, 2009
I would like to know how I can get the ouput from the following dmidecode command in example 1 to look like example 2 without having to grep -v all the unwanted lines.Is there a way in awk or sed?Example 1
Code:
Processor Information
Socket Designation: Socket 1 CPU 1
[code]...
View 7 Replies
View Related
Jul 15, 2010
I'm trying to search through some pdf files and I'm doing so by converting them to text files using pdftotext which is fine but I'm trying to get the number of occurrences in a paragraph of different words and it's adding a new line character at what it thinks is the right hand margin. I'm trying to remove all these singe new line characters but keep the doubles and I can't seem to work it out. i.e.
This is some text that has been broken.
Another paragraph.
becomes
This is some text that has been broken.
Another paragraph
View 9 Replies
View Related
Mar 11, 2011
For example, I have a text file with data which lists numerical values from two separate individuals
Code:
Person A
100
200
300
400
500
600
700
800
900
1000
1100
1200
Person B
1200
1100
1000
900
800
700
600
500
400
300
200
100
How would I go about reading the values for each Person, then being able to perform mathematical equations for each Person (finding the sum for example)?
View 13 Replies
View Related
Aug 11, 2010
I would like to parse an input file in which there are two columns per each row. We want to see how many lines are duplicated where we define duplicate to be having the same second field and different first field. For instance if the input file looks like the following:
79874 13131
79873 12309
79820 13131
[code]...
View 10 Replies
View Related
Jun 5, 2009
I want to remove duplicate or multiple similar lines from multiple files. I.e. if I have four files file1.txt file2.txt file3.txt and file4.txt and would like to find and remove similar lines from all these files keeping only one line from these similar lines. I only that uniq can be used to remove similar lines from a sorted file.
View 9 Replies
View Related
Aug 21, 2009
I'm trying to read content of file to variable and use this variable in for loop. The problem is, when I have c++ comment style in file - /*. Spaces in line are also interpreted as separated lines.
For example:
Code:
Changing $files to "$files" eliminate these problems but causes that whole content of variable is treated as one string (one execution of loop).
View 6 Replies
View Related
Jan 22, 2010
I am trying to create a function within my .bashrc that will process all of the files that do not end with .sh within a directory and execute them.The following is what I have so far. I am missing a way of excluding files that end with .sh though.
function startall {
for file in /etc/init.d/*.; do
"${file}" start
[code]...
View 2 Replies
View Related
Jul 13, 2011
I was analyzing the Disk read using hdparm utility. This is what i got as a result.
Code:
# hdparm -t /dev/sda
/dev/sda:
Timing buffered disk reads: 108 MB in 3.04 seconds = 35.51 MB/sec
Code:
# hdparm -T /dev/sda
/dev/sda:
Timing cached reads: 3496 MB in 1.99 seconds = 1756.56 MB/sec I m not sure what does Cache read and buffered disk read mean.
View 1 Replies
View Related
May 2, 2010
i am on processing text tasks And i found that if you assign a text to a variable is chomp'ed automatically the newline
Code:
variable=$(cat file.txt)
The problem is i can only access the items/lines using:
Code:
for line in $variable
do
echo $line
# Other commands
done
how do i convert this to an indexed array. More importantly, how do i get access to individual $line[0], ..., $line[n] Another thing, if the file.txt, has lines with spaces it is a mess using the for...in..., but echoing prints line by line...o_0
View 11 Replies
View Related
Nov 24, 2009
How do you remove parts of strings using python? Such as, if I have something like:
Code:
erme1 sdifskenklsd
erme2 sdfjksliel
[code]....
View 3 Replies
View Related
Jan 9, 2010
This gives a selection menu where you choose an option, and it should continue. I have several of these as part of a much larger script, but something is wrong with this while loop.
Code:
VARIABLEINPUT="1"
if [ $VARIABLEINPUT == "1" ] ; then
echo -e "${YELLOW}How often would you like the automatic update and maintenance to occur after the installation?:
${RED}1)${WHITE} Hourly
${RED}2)${WHITE} Daily
${RED}3)${WHITE} Weekly
${RED}4)${WHITE} Monthly
"
[Code].....
A very simple loop that uses a variable from earlier in the script to adjust variables for later in the script. For some reason, this while loop will not end - I've noted where with echos.
View 4 Replies
View Related
Jul 18, 2010
I have a while loop in a file that looks like:
Code:
while IFS=":" read name script
do
su
exit
[code]....
Where I redirect the file into the loop, for some reason, I can't do an su when I redirect a file like that. I get the error, "su: must be run from a terminal." Why is this? How can I fix it?
View 7 Replies
View Related
Aug 1, 2010
you have to read from many devices separate devices and make it look like a single one. It sounds very much like a device driver to me, perhaps... but getting my hands dirty with kernel code sounds like a daunting task for me that I've never done it...
View 2 Replies
View Related
Apr 21, 2010
I have bash 4.0. I used the following for loop example, but all it outputs is "{1..10} instead of the actual numbers one through ten. why?
Code:
for a in {1..10}
do
echo -n "$a "
done
View 5 Replies
View Related
Mar 19, 2010
I am trying to make a bash menu that loops with options but it does not work as I want:
Code:
I want to make it read an option and do the action then return to menu.
View 2 Replies
View Related
May 15, 2010
What is the difference between For and While when creating loops in bash scripting?
View 1 Replies
View Related
